From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_multi_queues_test_plan.rst
Date: Wed, 6 May 2020 03:25:51 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC21F6D@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200429221439.27896-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 30, 2020 6:15 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: update test commonds for vectorized
> cases in loopback_multi_queues_test_plan.rst
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../loopback_multi_queues_test_plan.rst | 20 ++++++++-----------
> 1 file changed, 8 insertions(+), 12 deletions(-)
>
> diff --git a/test_plans/loopback_multi_queues_test_plan.rst
> b/test_plans/loopback_multi_queues_test_plan.rst
> index e890b30..635b070 100644
> --- a/test_plans/loopback_multi_queues_test_plan.rst
> +++ b/test_plans/loopback_multi_queues_test_plan.rst
> @@ -38,10 +38,6 @@ This test plan test loopback multi-queues with split
> virtqueue mergeable, non-me inorder mergeable, inorder non-mergeable
> path, and packed virtqueue mergeable, non-mergeable，inorder mergeable,
> inorder non-mergeable, vectorized path. And virtio-user support 8 queues in
> maximum, check performance could be linear growth when enable 8 queues
> and 8 cores, notice cores should in same socket.
> -Note: Packed virtqueue vectorized path need below three initial
> requirements:
> - 1. AVX512 is allowed in config file and supported by compiler
> - 2. Host cpu support AVX512F
> - 3. ring size is power of two
>
> Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8
> queues
> ================================================================
> ===============
> @@ -358,7 +354,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable
> path using 1 queue and 8 que
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -389,7 +385,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable
> path using 1 queue and 8 que
>
> ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --
> rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -418,7 +414,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path
> using 1 queue and 8 queues
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -449,7 +445,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path
> using 1 queue and 8 queues
>
> ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -537,7 +533,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-
> mergeable path using 1 queue a
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -567,7 +563,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-
> mergeable path using 1 queue a
>
> ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -596,7 +592,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path
> using 1 queue and 8 queue
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> @@ -627,7 +623,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path
> using 1 queue and 8 queue
>
> ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
> --
> 2.17.1
prev parent reply other threads:[~2020-05-06 3:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 22:14 Yinan
2020-05-06 3:25 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC21F6D@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).