* [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_virtio_user_server_mode_test_plan.rst
@ 2020-04-29 22:16 Yinan
2020-05-06 3:25 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-04-29 22:16 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 20 ++++++++-----------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 2716c91..abf369a 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -38,10 +38,6 @@ Virtio-user server mode is a feature to enable virtio-user as the server, vhost
virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.
This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes split ring mergeable, non-mergeable, inorder mergeable,
inorder non-mergeable, vector_rx path and packed ring mergeable, non-mergeable, inorder non-mergeable, inorder mergeable, vectorized path.
-Note: Packed virtqueue vectorized path need below three initial requirements:
- 1. AVX512 is allowed in config file and supported by compiler
- 2. Host cpu support AVX512F
- 3. ring size is power of two
Test Case 1: Basic test for packed ring server mode
===================================================
@@ -315,7 +311,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -350,7 +346,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -387,7 +383,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -422,7 +418,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -675,7 +671,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -710,7 +706,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -747,7 +743,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -782,7 +778,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_virtio_user_server_mode_test_plan.rst
2020-04-29 22:16 [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_virtio_user_server_mode_test_plan.rst Yinan
@ 2020-05-06 3:25 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-05-06 3:25 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 30, 2020 6:16 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: update test commonds for vectorized
> cases in loopback_virtio_user_server_mode_test_plan.rst
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...back_virtio_user_server_mode_test_plan.rst | 20 ++++++++-----------
> 1 file changed, 8 insertions(+), 12 deletions(-)
>
> diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> index 2716c91..abf369a 100644
> --- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> +++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
> @@ -38,10 +38,6 @@ Virtio-user server mode is a feature to enable virtio-
> user as the server, vhost virtio-user can reconnect back to vhost-user again;
> at another hand, virtio-user also can reconnect back to vhost-user after
> virtio-user is killed.
> This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1,
> includes split ring mergeable, non-mergeable, inorder mergeable, inorder
> non-mergeable, vector_rx path and packed ring mergeable, non-mergeable,
> inorder non-mergeable, inorder mergeable, vectorized path.
> -Note: Packed virtqueue vectorized path need below three initial
> requirements:
> - 1. AVX512 is allowed in config file and supported by compiler
> - 2. Host cpu support AVX512F
> - 3. ring size is power of two
>
> Test Case 1: Basic test for packed ring server mode
> ===================================================
> @@ -315,7 +311,7 @@ Test Case 6: loopback reconnect test with split ring
> non-mergeable path and serv 2. Launch virtio-user as server mode with 2
> queues::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> >set fwd mac
> >start tx_first 32
> @@ -350,7 +346,7 @@ Test Case 6: loopback reconnect test with split ring
> non-mergeable path and serv 8. Relaunch virtio-user and send packets::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> >set fwd mac
> >start tx_first 32
> @@ -387,7 +383,7 @@ Test Case 7: loopback reconnect test with split ring
> vector_rx path and server m 2. Launch virtio-user as server mode with 2
> queues::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --nb-cores=2 --rxq=2 --txq=2
> >set fwd mac
> >start tx_first 32
> @@ -422,7 +418,7 @@ Test Case 7: loopback reconnect test with split ring
> vector_rx path and server m 8. Relaunch virtio-user and send packets::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
> -- -i --nb-cores=2 --rxq=2 --txq=2
> >set fwd mac
> >start tx_first 32
> @@ -675,7 +671,7 @@ Test Case 11: loopback reconnect test with packed
> ring inorder non-mergeable pat 2. Launch virtio-user as server mode with 2
> queues::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2
> --txq=2
> >set fwd mac
> >start tx_first 32
> @@ -710,7 +706,7 @@ Test Case 11: loopback reconnect test with packed
> ring inorder non-mergeable pat 8. Relaunch virtio-user and send packets::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2
> --txq=2
> >set fwd mac
> >start tx_first 32
> @@ -747,7 +743,7 @@ Test Case 12: loopback reconnect test with packed
> ring vectorized path and serve 2. Launch virtio-user as server mode with 2
> queues::
>
> ./testpmd -n 4 -l 5-7 --log-level=pmd.net.virtio.driver,8 --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> >set fwd mac
> >start tx_first 32
> @@ -782,7 +778,7 @@ Test Case 12: loopback reconnect test with packed
> ring vectorized path and serve 8. Relaunch virtio-user and send packets::
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1
> \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=
> + 1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> >set fwd mac
> >start tx_first 32
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-06 3:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-29 22:16 [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_virtio_user_server_mode_test_plan.rst Yinan
2020-05-06 3:25 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).