* [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test @ 2020-05-12 5:58 Xiao Qimai 2020-05-12 5:58 ` [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update Xiao Qimai ` (2 more replies) 0 siblings, 3 replies; 5+ messages in thread From: Xiao Qimai @ 2020-05-12 5:58 UTC (permalink / raw) To: dts; +Cc: Xiao Qimai *. update compile cmd of app/test according to dpdk's update Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com> --- tests/TestSuite_unit_tests_loopback.py | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/tests/TestSuite_unit_tests_loopback.py b/tests/TestSuite_unit_tests_loopback.py index 68b1f30..c1d37b2 100644 --- a/tests/TestSuite_unit_tests_loopback.py +++ b/tests/TestSuite_unit_tests_loopback.py @@ -70,6 +70,8 @@ class TestUnitTestsLoopback(TestCase): self.verify(self.arch in ["x86_64", "arm64"], "pmd perf request running in x86_64 or arm64") self.max_traffic_burst = self.get_max_traffic_burst() self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST %s/#define MAX_TRAFFIC_BURST 32/' app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30) + self.tmp_path = '/tmp/test_pmd_perf.c' + self.dut.send_expect("cp app/test/test_pmd_perf.c %s" % self.tmp_path, "# ") def set_up(self): """ @@ -90,14 +92,14 @@ class TestUnitTestsLoopback(TestCase): Run pmd stream control mode burst test case. """ self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' app/test/test_pmd_perf.c", "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") - self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") + self.tester.send_expect("tcpdump -i %s ether[12:2] != '0x88cc' -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") eal_params = self.dut.create_eal_parameters(cores=self.cores) - self.dut.send_expect("./app/test/test %s" % (eal_params), "R.*T.*E.*>.*>", 60) + self.dut.send_expect("./%s/app/test %s" % (self.target, eal_params), "R.*T.*E.*>.*>", 60) out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120) print(out) self.dut.send_expect("quit", "# ") @@ -113,14 +115,14 @@ class TestUnitTestsLoopback(TestCase): """ self.dut.send_expect("sed -i -e 's/lpbk_mode = 1/lpbk_mode = 0/' app/test/test_pmd_perf.c", "# ", 30) self.dut.send_expect("sed -i -e '/check_all_ports_link_status(nb_ports, RTE_PORT_ALL);/a\ sleep(6);' app/test/test_pmd_perf.c", "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") eal_params = self.dut.create_eal_parameters(cores=self.cores) - self.dut.send_expect("./app/test/test %s" % (eal_params), "R.*T.*E.*>.*>", 60) + self.dut.send_expect("./%s/app/test %s" % (self.target, eal_params), "R.*T.*E.*>.*>", 60) self.dut.send_command("pmd_perf_autotest", 30) # There is no packet loopback, so the test is hung. # It needs to kill the process manually. @@ -133,16 +135,16 @@ class TestUnitTestsLoopback(TestCase): """ Run after each test case. """ + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % self.tmp_path, "# ") self.dut.kill_all() def tear_down_all(self): """ Run after each test suite. """ - self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' app/test/test_pmd_perf.c", "# ", 30) - self.dut.send_expect("sed -i -e '/sleep(6)/d' app/test/test_pmd_perf.c", "# ", 30) + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % self.tmp_path, "# ") self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST 32/#define MAX_TRAFFIC_BURST %s/' app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.dut.kill_all() -- 1.8.3.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update 2020-05-12 5:58 [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao Qimai @ 2020-05-12 5:58 ` Xiao Qimai 2020-05-12 6:09 ` Xiao, QimaiX 2020-05-12 6:11 ` [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao, QimaiX 2020-06-02 5:47 ` Tu, Lijuan 2 siblings, 1 reply; 5+ messages in thread From: Xiao Qimai @ 2020-05-12 5:58 UTC (permalink / raw) To: dts; +Cc: Xiao Qimai *. replace compile command of app/test with new command Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com> --- tests/TestSuite_unit_tests_pmd_perf.py | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/tests/TestSuite_unit_tests_pmd_perf.py b/tests/TestSuite_unit_tests_pmd_perf.py index a01cf4e..3f4ed12 100644 --- a/tests/TestSuite_unit_tests_pmd_perf.py +++ b/tests/TestSuite_unit_tests_pmd_perf.py @@ -71,13 +71,17 @@ class TestUnitTestsPmdPerf(TestCase): [arch, machine, _, toolchain] = self.target.split('-') self.dut.send_expect("sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=y/CONFIG_RTE_IXGBE_INC_VECTOR=n/' config/common_base", "# ", 30) self.dut.build_install_dpdk(self.target) - out = self.dut.build_dpdk_apps('./app/test/') - self.verify('make: Leaving directory' in out, "Compilation failed") - self.dut.send_expect("mv -f ./app/test/test ./app/test/test_scalar", "# ") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") + self.verify("No such" not in out, "Compilation error") + self.dut.send_expect("mv -f ./%s/app/test ./app/test/test_scalar" % self.target, "# ") + self.dut.send_expect("sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=n/CONFIG_RTE_IXGBE_INC_VECTOR=y/' config/common_base", "# ", 30) self.dut.build_install_dpdk(self.target) - out = self.dut.build_dpdk_apps('./app/test/') - self.verify('make: Leaving directory' in out, "Compilation failed") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") + self.verify("No such" not in out, "Compilation error") + self.dut.send_expect("mv -f ./%s/app/test ./app/test/test" % self.target, "# ") socket_id = self.dut.ports_info[0]['port'].socket self.cores = self.dut.get_core_list(config='1S/4C/1T', socket=socket_id) -- 1.8.3.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update 2020-05-12 5:58 ` [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update Xiao Qimai @ 2020-05-12 6:09 ` Xiao, QimaiX 0 siblings, 0 replies; 5+ messages in thread From: Xiao, QimaiX @ 2020-05-12 6:09 UTC (permalink / raw) To: dts [-- Attachment #1.1: Type: text/plain, Size: 2515 bytes --] Tested-by:Xiao Qimai <qimaix.xiao@intel.com> ________________________________ From: Xiao, QimaiX <qimaix.xiao@intel.com> Sent: Tuesday, May 12, 2020 1:58 PM To: dts@dpdk.org <dts@dpdk.org> Cc: Xiao, QimaiX <qimaix.xiao@intel.com> Subject: [dts][PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update *. replace compile command of app/test with new command Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com> --- tests/TestSuite_unit_tests_pmd_perf.py | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/tests/TestSuite_unit_tests_pmd_perf.py b/tests/TestSuite_unit_tests_pmd_perf.py index a01cf4e..3f4ed12 100644 --- a/tests/TestSuite_unit_tests_pmd_perf.py +++ b/tests/TestSuite_unit_tests_pmd_perf.py @@ -71,13 +71,17 @@ class TestUnitTestsPmdPerf(TestCase): [arch, machine, _, toolchain] = self.target.split('-') self.dut.send_expect("sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=y/CONFIG_RTE_IXGBE_INC_VECTOR=n/' config/common_base", "# ", 30) self.dut.build_install_dpdk(self.target) - out = self.dut.build_dpdk_apps('./app/test/') - self.verify('make: Leaving directory' in out, "Compilation failed") - self.dut.send_expect("mv -f ./app/test/test ./app/test/test_scalar", "# ") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") + self.verify("No such" not in out, "Compilation error") + self.dut.send_expect("mv -f ./%s/app/test ./app/test/test_scalar" % self.target, "# ") + self.dut.send_expect("sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=n/CONFIG_RTE_IXGBE_INC_VECTOR=y/' config/common_base", "# ", 30) self.dut.build_install_dpdk(self.target) - out = self.dut.build_dpdk_apps('./app/test/') - self.verify('make: Leaving directory' in out, "Compilation failed") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") + self.verify("No such" not in out, "Compilation error") + self.dut.send_expect("mv -f ./%s/app/test ./app/test/test" % self.target, "# ") socket_id = self.dut.ports_info[0]['port'].socket self.cores = self.dut.get_core_list(config='1S/4C/1T', socket=socket_id) -- 1.8.3.1 [-- Attachment #1.2: Type: text/html, Size: 4876 bytes --] [-- Attachment #2: TestUnitTestsPmdPerf.log --] [-- Type: application/octet-stream, Size: 137245 bytes --] 12/05/2020 13:36:18 dts: TEST SUITE : TestUnitTestsPmdPerf 12/05/2020 13:36:18 dts: NIC : sagepond 12/05/2020 13:36:18 dut.10.240.183.202: 12/05/2020 13:36:18 tester: 12/05/2020 13:36:18 dut.10.240.183.202: sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=y/CONFIG_RTE_IXGBE_INC_VECTOR=n/' config/common_base 12/05/2020 13:36:18 dut.10.240.183.202: 12/05/2020 13:36:18 dut.10.240.183.202: sed -i 's/CONFIG_RTE_EAL_IGB_UIO=n/CONFIG_RTE_EAL_IGB_UIO=y/g' config/common_base 12/05/2020 13:36:18 dut.10.240.183.202: 12/05/2020 13:36:18 dut.10.240.183.202: rm -rf x86_64-native-linuxapp-gcc 12/05/2020 13:36:18 dut.10.240.183.202: 12/05/2020 13:36:18 dut.10.240.183.202: rm -rf ./app/test/test_resource_c.res.o 12/05/2020 13:36:18 dut.10.240.183.202: 12/05/2020 13:36:18 dut.10.240.183.202: rm -rf ./app/test/test_resource_tar.res.o 12/05/2020 13:36:19 dut.10.240.183.202: 12/05/2020 13:36:19 dut.10.240.183.202: rm -rf ./app/test/test_pci_sysfs.res.o 12/05/2020 13:36:19 dut.10.240.183.202: 12/05/2020 13:36:19 dut.10.240.183.202: make -j 14 install T=x86_64-native-linuxapp-gcc 12/05/2020 13:40:18 dut.10.240.183.202: Configuration done using x86_64-native-linuxapp-gcc == Build lib == Build lib/librte_kvargs == Build lib/librte_telemetry SYMLINK-FILE include/rte_telemetry.h SYMLINK-FILE include/rte_kvargs.h CC telemetry.o CC telemetry_data.o CC telemetry_legacy.o CC rte_kvargs.o AR librte_kvargs.a INSTALL-LIB librte_kvargs.a AR librte_telemetry.a INSTALL-LIB librte_telemetry.a == Build lib/librte_eal == Build lib/librte_eal/include SYMLINK-FILE include/rte_alarm.h SYMLINK-FILE include/rte_bitmap.h SYMLINK-FILE include/rte_branch_prediction.h SYMLINK-FILE include/rte_bus.h SYMLINK-FILE include/rte_class.h SYMLINK-FILE include/rte_common.h SYMLINK-FILE include/rte_compat.h SYMLINK-FILE include/rte_debug.h SYMLINK-FILE include/rte_devargs.h SYMLINK-FILE include/rte_dev.h SYMLINK-FILE include/rte_eal.h SYMLINK-FILE include/rte_eal_interrupts.h SYMLINK-FILE include/rte_eal_memconfig.h SYMLINK-FILE include/rte_eal_trace.h SYMLINK-FILE include/rte_errno.h SYMLINK-FILE include/rte_fbarray.h SYMLINK-FILE include/rte_function_versioning.h SYMLINK-FILE include/rte_hexdump.h SYMLINK-FILE include/rte_hypervisor.h SYMLINK-FILE include/rte_interrupts.h SYMLINK-FILE include/rte_keepalive.h SYMLINK-FILE include/rte_launch.h SYMLINK-FILE include/rte_lcore.h SYMLINK-FILE include/rte_log.h SYMLINK-FILE include/rte_malloc.h SYMLINK-FILE include/rte_memory.h SYMLINK-FILE include/rte_memzone.h SYMLINK-FILE include/rte_pci_dev_feature_defs.h SYMLINK-FILE include/rte_pci_dev_features.h SYMLINK-FILE include/rte_per_lcore.h SYMLINK-FILE include/rte_random.h SYMLINK-FILE include/rte_reciprocal.h SYMLINK-FILE include/rte_service.h SYMLINK-FILE include/rte_service_component.h SYMLINK-FILE include/rte_string_fns.h SYMLINK-FILE include/rte_tailq.h SYMLINK-FILE include/rte_test.h SYMLINK-FILE include/rte_time.h SYMLINK-FILE include/rte_trace.h SYMLINK-FILE include/rte_trace_point.h SYMLINK-FILE include/rte_trace_point_register.h SYMLINK-FILE include/rte_uuid.h SYMLINK-FILE include/rte_version.h SYMLINK-FILE include/rte_vfio.h SYMLINK-FILE include/rte_atomic.h SYMLINK-FILE include/rte_atomic_32.h SYMLINK-FILE include/rte_atomic_64.h SYMLINK-FILE include/rte_byteorder.h SYMLINK-FILE include/rte_byteorder_32.h SYMLINK-FILE include/rte_byteorder_64.h SYMLINK-FILE include/rte_cpuflags.h SYMLINK-FILE include/rte_cycles.h SYMLINK-FILE include/rte_io.h SYMLINK-FILE include/rte_mcslock.h SYMLINK-FILE include/rte_memcpy.h SYMLINK-FILE include/rte_pause.h SYMLINK-FILE include/rte_prefetch.h SYMLINK-FILE include/rte_rtm.h SYMLINK-FILE include/rte_rwlock.h SYMLINK-FILE include/rte_spinlock.h SYMLINK-FILE include/rte_ticketlock.h SYMLINK-FILE include/rte_vect.h SYMLINK-FILE include/generic/rte_atomic.h SYMLINK-FILE include/generic/rte_byteorder.h SYMLINK-FILE include/generic/rte_cpuflags.h SYMLINK-FILE include/generic/rte_cycles.h SYMLINK-FILE include/generic/rte_io.h SYMLINK-FILE include/generic/rte_mcslock.h SYMLINK-FILE include/generic/rte_memcpy.h SYMLINK-FILE include/generic/rte_pause.h SYMLINK-FILE include/generic/rte_prefetch.h SYMLINK-FILE include/generic/rte_rwlock.h SYMLINK-FILE include/generic/rte_spinlock.h SYMLINK-FILE include/generic/rte_ticketlock.h SYMLINK-FILE include/generic/rte_vect.h == Build lib/librte_eal/linux SYMLINK-FILE include/rte_kni_common.h SYMLINK-FILE include/rte_os.h CC eal.o CC eal_cpuflags.o CC eal_hugepage_info.o CC eal_memory.o CC eal_thread.o CC eal_log.o CC eal_vfio.o CC eal_vfio_mp_sync.o CC eal_memalloc.o CC eal_debug.o CC eal_lcore.o CC eal_timer.o CC eal_interrupts.o CC eal_alarm.o CC eal_dev.o CC eal_common_lcore.o CC eal_common_timer.o CC eal_common_memzone.o CC eal_common_log.o CC eal_common_launch.o CC eal_common_mcfg.o CC eal_common_memalloc.o CC eal_common_memory.o CC eal_common_tailqs.o CC eal_common_errno.o CC eal_common_cpuflags.o CC eal_common_hypervisor.o CC eal_common_string_fns.o CC eal_common_hexdump.o CC eal_common_devargs.o CC eal_common_class.o CC eal_common_bus.o CC eal_common_dev.o CC eal_common_options.o CC eal_common_thread.o CC eal_common_proc.o CC eal_common_fbarray.o CC eal_common_uuid.o CC eal_common_trace.o CC eal_common_trace_ctf.o CC eal_common_trace_points.o CC eal_common_trace_utils.o CC rte_malloc.o CC hotplug_mp.o CC malloc_elem.o CC malloc_heap.o CC malloc_mp.o CC rte_keepalive.o CC rte_service.o CC rte_random.o CC rte_reciprocal.o CC rte_cpuflags.o CC rte_hypervisor.o CC rte_spinlock.o CC rte_cycles.o AR librte_eal.a INSTALL-LIB librte_eal.a == Build lib/librte_pci == Build lib/librte_ring == Build lib/librte_stack == Build lib/librte_cfgfile == Build lib/librte_meter == Build lib/librte_timer == Build lib/librte_acl == Build lib/librte_graph == Build lib/librte_jobstats SYMLINK-FILE include/rte_timer.h SYMLINK-FILE include/rte_jobstats.h CC rte_timer.o CC rte_jobstats.o SYMLINK-FILE include/rte_pci.h SYMLINK-FILE include/rte_ring.h SYMLINK-FILE include/rte_ring_core.h SYMLINK-FILE include/rte_ring_elem.h SYMLINK-FILE include/rte_acl_osdep.h SYMLINK-FILE include/rte_ring_generic.h SYMLINK-FILE include/rte_cfgfile.h CC rte_pci.o SYMLINK-FILE include/rte_acl.h SYMLINK-FILE include/rte_stack.h SYMLINK-FILE include/rte_meter.h SYMLINK-FILE include/rte_graph.h CC rte_meter.o SYMLINK-FILE include/rte_stack_std.h SYMLINK-FILE include/rte_graph_worker.h SYMLINK-FILE include/rte_stack_lf.h CC rte_cfgfile.o CC tb_mem.o SYMLINK-FILE include/rte_ring_c11_mem.h SYMLINK-FILE include/rte_stack_lf_generic.h SYMLINK-FILE include/rte_stack_lf_c11.h SYMLINK-FILE include/rte_ring_hts.h SYMLINK-FILE include/rte_stack_lf_stubs.h CC node.o SYMLINK-FILE include/rte_ring_hts_c11_mem.h CC graph.o SYMLINK-FILE include/rte_ring_peek.h CC graph_ops.o CC rte_acl.o CC graph_debug.o CC rte_stack.o SYMLINK-FILE include/rte_ring_peek_c11_mem.h CC graph_stats.o SYMLINK-FILE include/rte_ring_rts.h SYMLINK-FILE include/rte_ring_rts_c11_mem.h CC rte_ring.o AR librte_pci.a INSTALL-LIB librte_pci.a CC graph_populate.o CC rte_stack_std.o AR librte_meter.a INSTALL-LIB librte_meter.a CC rte_stack_lf.o CC acl_bld.o AR librte_ring.a INSTALL-LIB librte_ring.a AR librte_cfgfile.a CC acl_gen.o INSTALL-LIB librte_cfgfile.a CC acl_run_scalar.o AR librte_stack.a INSTALL-LIB librte_stack.a CC acl_run_sse.o AR librte_jobstats.a INSTALL-LIB librte_jobstats.a CC acl_run_avx2.o == Build lib/librte_mempool == Build lib/librte_hash == Build lib/librte_rcu AR librte_timer.a INSTALL-LIB librte_timer.a == Build lib/librte_power SYMLINK-FILE include/rte_mempool.h SYMLINK-FILE include/rte_mempool_trace.h SYMLINK-FILE include/rte_mempool_trace_fp.h CC rte_mempool.o CC rte_mempool_ops.o CC rte_mempool_ops_default.o CC mempool_trace_points.o SYMLINK-FILE include/rte_hash.h SYMLINK-FILE include/rte_hash_crc.h SYMLINK-FILE include/rte_jhash.h SYMLINK-FILE include/rte_thash.h SYMLINK-FILE include/rte_fbk_hash.h CC rte_cuckoo_hash.o AR librte_graph.a INSTALL-LIB librte_graph.a CC rte_fbk_hash.o SYMLINK-FILE include/rte_rcu_qsbr.h CC rte_rcu_qsbr.o SYMLINK-FILE include/rte_power.h SYMLINK-FILE include/rte_power_empty_poll.h CC rte_power.o CC power_acpi_cpufreq.o CC power_kvm_vm.o CC guest_channel.o CC rte_power_empty_poll.o CC power_pstate_cpufreq.o AR librte_rcu.a INSTALL-LIB librte_rcu.a AR librte_mempool.a INSTALL-LIB librte_mempool.a == Build lib/librte_mbuf == Build lib/librte_rib AR librte_power.a INSTALL-LIB librte_power.a SYMLINK-FILE include/rte_mbuf.h SYMLINK-FILE include/rte_mbuf_core.h SYMLINK-FILE include/rte_mbuf_ptype.h SYMLINK-FILE include/rte_mbuf_pool_ops.h SYMLINK-FILE include/rte_mbuf_dyn.h SYMLINK-FILE include/rte_rib.h SYMLINK-FILE include/rte_rib6.h CC rte_mbuf.o CC rte_rib.o CC rte_rib6.o CC rte_mbuf_ptype.o CC rte_mbuf_pool_ops.o CC rte_mbuf_dyn.o AR librte_acl.a INSTALL-LIB librte_acl.a AR librte_rib.a INSTALL-LIB librte_rib.a == Build lib/librte_fib AR librte_hash.a INSTALL-LIB librte_hash.a AR librte_mbuf.a INSTALL-LIB librte_mbuf.a == Build lib/librte_efd == Build lib/librte_member == Build lib/librte_lpm == Build lib/librte_bbdev == Build lib/librte_net == Build lib/librte_cryptodev == Build lib/librte_compressdev == Build lib/librte_reorder SYMLINK-FILE include/rte_fib.h SYMLINK-FILE include/rte_fib6.h CC rte_fib.o CC rte_fib6.o CC dir24_8.o CC trie.o SYMLINK-FILE include/rte_lpm.h SYMLINK-FILE include/rte_lpm6.h SYMLINK-FILE include/rte_lpm_sse.h SYMLINK-FILE include/rte_member.h CC rte_member.o CC rte_member_ht.o CC rte_lpm.o SYMLINK-FILE include/rte_ip.h SYMLINK-FILE include/rte_efd.h SYMLINK-FILE include/rte_reorder.h SYMLINK-FILE include/rte_comp.h CC rte_efd.o SYMLINK-FILE include/rte_tcp.h SYMLINK-FILE include/rte_udp.h SYMLINK-FILE include/rte_compressdev.h SYMLINK-FILE include/rte_crypto.h CC rte_reorder.o SYMLINK-FILE include/rte_bbdev_op.h SYMLINK-FILE include/rte_compressdev_pmd.h SYMLINK-FILE include/rte_compressdev_internal.h SYMLINK-FILE include/rte_esp.h SYMLINK-FILE include/rte_crypto_asym.h SYMLINK-FILE include/rte_bbdev.h SYMLINK-FILE include/rte_bbdev_pmd.h SYMLINK-FILE include/rte_sctp.h CC rte_compressdev.o SYMLINK-FILE include/rte_crypto_sym.h SYMLINK-FILE include/rte_cryptodev.h SYMLINK-FILE include/rte_icmp.h CC rte_bbdev.o SYMLINK-FILE include/rte_arp.h SYMLINK-FILE include/rte_cryptodev_pmd.h CC rte_lpm6.o SYMLINK-FILE include/rte_ether.h SYMLINK-FILE include/rte_cryptodev_trace.h SYMLINK-FILE include/rte_gre.h SYMLINK-FILE include/rte_cryptodev_trace_fp.h SYMLINK-FILE include/rte_net.h CC rte_cryptodev.o SYMLINK-FILE include/rte_net_crc.h SYMLINK-FILE include/rte_mpls.h SYMLINK-FILE include/rte_higig.h SYMLINK-FILE include/rte_gtp.h SYMLINK-FILE include/rte_vxlan.h CC rte_net.o CC rte_net_crc.o CC rte_ether.o CC rte_arp.o CC rte_member_vbf.o AR librte_reorder.a INSTALL-LIB librte_reorder.a CC rte_compressdev_pmd.o CC rte_comp.o CC rte_cryptodev_pmd.o CC cryptodev_trace_points.o AR librte_lpm.a INSTALL-LIB librte_lpm.a AR librte_fib.a INSTALL-LIB librte_fib.a AR librte_bbdev.a INSTALL-LIB librte_bbdev.a AR librte_net.a INSTALL-LIB librte_net.a == Build lib/librte_cmdline == Build lib/librte_sched == Build lib/librte_ethdev AR librte_member.a INSTALL-LIB librte_member.a SYMLINK-FILE include/rte_sched.h SYMLINK-FILE include/rte_sched_common.h SYMLINK-FILE include/rte_red.h SYMLINK-FILE include/rte_approx.h CC rte_sched.o CC rte_red.o CC rte_approx.o SYMLINK-FILE include/rte_ethdev_driver.h SYMLINK-FILE include/rte_ethdev.h SYMLINK-FILE include/rte_ethdev_core.h SYMLINK-FILE include/rte_ethdev_pci.h SYMLINK-FILE include/rte_ethdev_trace.h SYMLINK-FILE include/rte_ethdev_trace_fp.h SYMLINK-FILE include/rte_ethdev_vdev.h SYMLINK-FILE include/rte_eth_ctrl.h SYMLINK-FILE include/rte_dev_info.h SYMLINK-FILE include/rte_flow.h SYMLINK-FILE include/rte_flow_driver.h SYMLINK-FILE include/rte_tm.h SYMLINK-FILE include/rte_tm_driver.h SYMLINK-FILE include/rte_mtr.h SYMLINK-FILE include/rte_mtr_driver.h SYMLINK-FILE include/cmdline.h CC ethdev_private.o CC rte_ethdev.o CC rte_class_eth.o CC rte_flow.o SYMLINK-FILE include/cmdline_parse.h CC rte_tm.o SYMLINK-FILE include/cmdline_parse_num.h CC rte_mtr.o CC ethdev_profile.o SYMLINK-FILE include/cmdline_parse_ipaddr.h SYMLINK-FILE include/cmdline_parse_etheraddr.h SYMLINK-FILE include/cmdline_parse_string.h AR librte_efd.a SYMLINK-FILE include/cmdline_rdline.h INSTALL-LIB librte_efd.a SYMLINK-FILE include/cmdline_vt100.h CC ethdev_trace_points.o SYMLINK-FILE include/cmdline_socket.h AR librte_compressdev.a INSTALL-LIB librte_compressdev.a SYMLINK-FILE include/cmdline_cirbuf.h SYMLINK-FILE include/cmdline_parse_portlist.h CC cmdline.o CC cmdline_cirbuf.o CC cmdline_parse.o CC cmdline_parse_etheraddr.o CC cmdline_parse_ipaddr.o CC cmdline_parse_num.o AR librte_cryptodev.a INSTALL-LIB librte_cryptodev.a CC cmdline_parse_string.o CC cmdline_rdline.o CC cmdline_vt100.o CC cmdline_socket.o CC cmdline_parse_portlist.o AR librte_cmdline.a INSTALL-LIB librte_cmdline.a AR librte_sched.a INSTALL-LIB librte_sched.a AR librte_ethdev.a INSTALL-LIB librte_ethdev.a == Build lib/librte_security == Build lib/librte_eventdev == Build lib/librte_rawdev == Build lib/librte_vhost == Build lib/librte_gro == Build lib/librte_metrics == Build lib/librte_ip_frag == Build lib/librte_pdump == Build lib/librte_kni == Build lib/librte_distributor == Build lib/librte_bpf == Build lib/librte_gso == Build lib/librte_node SYMLINK-FILE include/rte_rawdev.h SYMLINK-FILE include/rte_metrics.h SYMLINK-FILE include/rte_gro.h SYMLINK-FILE include/rte_rawdev_pmd.h SYMLINK-FILE include/rte_eventdev.h SYMLINK-FILE include/rte_ip_frag.h SYMLINK-FILE include/rte_distributor.h SYMLINK-FILE include/rte_gso.h SYMLINK-FILE include/rte_kni.h SYMLINK-FILE include/rte_pdump.h SYMLINK-FILE include/rte_security.h CC rte_metrics.o CC rte_kni.o SYMLINK-FILE include/bpf_def.h CC rte_ipv4_fragmentation.o CC rte_rawdev.o CC rte_ipv6_fragmentation.o SYMLINK-FILE include/rte_eventdev_pmd.h CC rte_distributor_single.o CC rte_gso.o CC rte_gro.o SYMLINK-FILE include/rte_security_driver.h CC rte_pdump.o SYMLINK-FILE include/rte_node_ip4_api.h SYMLINK-FILE include/rte_bpf.h SYMLINK-FILE include/rte_eventdev_pmd_pci.h CC rte_security.o SYMLINK-FILE include/rte_vhost.h SYMLINK-FILE include/rte_bpf_ethdev.h SYMLINK-FILE include/rte_node_eth_api.h SYMLINK-FILE include/rte_eventdev_pmd_vdev.h SYMLINK-FILE include/rte_vdpa.h CC null.o SYMLINK-FILE include/rte_vhost_crypto.h SYMLINK-FILE include/rte_eventdev_trace.h CC bpf.o SYMLINK-FILE include/rte_eventdev_trace_fp.h CC fd_man.o SYMLINK-FILE include/rte_event_ring.h SYMLINK-FILE include/rte_event_eth_rx_adapter.h SYMLINK-FILE include/rte_event_timer_adapter.h SYMLINK-FILE include/rte_event_timer_adapter_pmd.h SYMLINK-FILE include/rte_event_crypto_adapter.h SYMLINK-FILE include/rte_event_eth_tx_adapter.h CC rte_eventdev.o CC log.o AR librte_metrics.a INSTALL-LIB librte_metrics.a CC rte_event_ring.o CC iotlb.o == Build lib/librte_bitratestats CC gso_common.o CC ethdev_rx.o CC bpf_exec.o AR librte_security.a INSTALL-LIB librte_security.a CC rte_distributor.o CC rte_distributor_match_sse.o CC gro_tcp4.o SYMLINK-FILE include/rte_bitrate.h CC rte_bitrate.o == Build lib/librte_latencystats CC rte_ipv4_reassembly.o AR librte_rawdev.a INSTALL-LIB librte_rawdev.a CC rte_ipv6_reassembly.o AR librte_kni.a INSTALL-LIB librte_kni.a CC gro_vxlan_tcp4.o SYMLINK-FILE include/rte_latencystats.h CC rte_latencystats.o AR librte_pdump.a INSTALL-LIB librte_pdump.a CC rte_ip_frag_common.o CC ethdev_tx.o CC ip_frag_internal.o CC socket.o CC eventdev_trace_points.o AR librte_bitratestats.a INSTALL-LIB librte_bitratestats.a CC vhost.o CC vhost_user.o CC gso_tcp4.o CC gso_tunnel_tcp4.o CC bpf_load.o CC gso_udp4.o CC rte_event_eth_rx_adapter.o CC ethdev_ctrl.o AR librte_distributor.a INSTALL-LIB librte_distributor.a CC ip4_lookup.o AR librte_latencystats.a INSTALL-LIB librte_latencystats.a CC bpf_pkt.o AR librte_gro.a INSTALL-LIB librte_gro.a CC ip4_rewrite.o CC pkt_drop.o AR librte_ip_frag.a INSTALL-LIB librte_ip_frag.a CC bpf_validate.o CC bpf_jit_x86.o == Build lib/librte_ipsec CC rte_event_timer_adapter.o AR librte_gso.a INSTALL-LIB librte_gso.a CC rte_event_crypto_adapter.o CC rte_event_eth_tx_adapter.o SYMLINK-FILE include/rte_ipsec.h SYMLINK-FILE include/rte_ipsec_group.h SYMLINK-FILE include/rte_ipsec_sa.h SYMLINK-FILE include/rte_ipsec_sad.h CC esp_inb.o CC esp_outb.o CC virtio_net.o CC vdpa.o CC vhost_crypto.o CC sa.o CC ses.o AR librte_node.a INSTALL-LIB librte_node.a CC ipsec_sad.o AR librte_bpf.a INSTALL-LIB librte_bpf.a AR librte_ipsec.a AR librte_eventdev.a INSTALL-LIB librte_ipsec.a INSTALL-LIB librte_eventdev.a == Build lib/librte_port SYMLINK-FILE include/rte_port.h SYMLINK-FILE include/rte_port_ethdev.h SYMLINK-FILE include/rte_port_ring.h SYMLINK-FILE include/rte_port_frag.h SYMLINK-FILE include/rte_port_ras.h SYMLINK-FILE include/rte_port_fd.h SYMLINK-FILE include/rte_port_sched.h SYMLINK-FILE include/rte_port_kni.h SYMLINK-FILE include/rte_port_sym_crypto.h SYMLINK-FILE include/rte_port_source_sink.h SYMLINK-FILE include/rte_port_eventdev.h CC rte_port_ethdev.o CC rte_port_ring.o CC rte_port_frag.o CC rte_port_ras.o CC rte_port_sched.o CC rte_port_fd.o CC rte_port_kni.o CC rte_port_source_sink.o CC rte_port_sym_crypto.o CC rte_port_eventdev.o AR librte_port.a INSTALL-LIB librte_port.a == Build lib/librte_table SYMLINK-FILE include/rte_table.h SYMLINK-FILE include/rte_table_lpm.h SYMLINK-FILE include/rte_table_lpm_ipv6.h SYMLINK-FILE include/rte_table_acl.h SYMLINK-FILE include/rte_table_hash.h SYMLINK-FILE include/rte_table_hash_cuckoo.h SYMLINK-FILE include/rte_table_hash_func.h SYMLINK-FILE include/rte_table_hash_func_arm64.h SYMLINK-FILE include/rte_lru.h SYMLINK-FILE include/rte_lru_x86.h SYMLINK-FILE include/rte_table_array.h SYMLINK-FILE include/rte_table_stub.h CC rte_table_lpm.o CC rte_table_lpm_ipv6.o CC rte_table_acl.o CC rte_table_hash_cuckoo.o CC rte_table_hash_key8.o CC rte_table_hash_key16.o CC rte_table_hash_key32.o CC rte_table_hash_ext.o CC rte_table_hash_lru.o CC rte_table_array.o CC rte_table_stub.o AR librte_vhost.a INSTALL-LIB librte_vhost.a AR librte_table.a INSTALL-LIB librte_table.a == Build lib/librte_flow_classify == Build lib/librte_pipeline SYMLINK-FILE include/rte_pipeline.h SYMLINK-FILE include/rte_port_in_action.h SYMLINK-FILE include/rte_table_action.h CC rte_pipeline.o CC rte_port_in_action.o CC rte_table_action.o SYMLINK-FILE include/rte_flow_classify.h CC rte_flow_classify.o CC rte_flow_classify_parse.o AR librte_flow_classify.a INSTALL-LIB librte_flow_classify.a AR librte_pipeline.a INSTALL-LIB librte_pipeline.a == Build buildtools == Build kernel == Build buildtools/pmdinfogen == Build kernel/linux HOSTCC pmdinfogen.o == Build kernel/linux/igb_uio HOSTLD dpdk-pmdinfogen INSTALL-HOSTAPP dpdk-pmdinfogen == Build drivers == Build drivers/common == Build drivers/common/cpt == Build drivers/common/octeontx2 == Build drivers/common/octeontx == Build drivers/common/iavf == Build drivers/common/dpaax CC otx2_dev.o CC otx2_irq.o CC otx2_common.o CC otx2_mbox.o CC otx2_sec_idev.o CC octeontx_mbox.o CC cpt_fpm_tables.o CC cpt_pmd_ops_helper.o CC dpaax_iova_table.o CC dpaa_of.o CC iavf_adminq.o CC iavf_common.o CC iavf_impl.o AR librte_common_octeontx.a INSTALL-LIB librte_common_octeontx.a AR librte_common_dpaax.a INSTALL-LIB librte_common_dpaax.a AR librte_common_cpt.a INSTALL-LIB librte_common_cpt.a AR librte_common_octeontx2.a INSTALL-LIB librte_common_octeontx2.a AR librte_common_iavf.a INSTALL-LIB librte_common_iavf.a == Build drivers/bus AR /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/built-in.a CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o == Build drivers/bus/ifpga == Build drivers/bus/fslmc == Build drivers/bus/vmbus == Build drivers/bus/dpaa == Build drivers/bus/pci == Build drivers/bus/vdev SYMLINK-FILE include/rte_bus_ifpga.h SYMLINK-FILE include/rte_bus_pci.h CC ifpga_bus.o CC ifpga_common.o CC linux/pci_uio.o SYMLINK-FILE include/rte_bus_vdev.h CC linux/pci.o CC qbman/qbman_portal.o CC qbman/qbman_debug.o CC mc/dpmng.o CC dpaa_bus.o CC mc/dpbp.o SYMLINK-FILE include/rte_bus_vmbus.h CC base/fman/fman.o CC base/fman/fman_hw.o CC vdev.o SYMLINK-FILE include/rte_vmbus_reg.h CC linux/vmbus_bus.o CC linux/vmbus_uio.o CC vmbus_common.o CC vmbus_channel.o Building modules, stage 2. CC vmbus_bufring.o MODPOST 1 modules CC mc/dpio.o CC mc/mc_sys.o AR librte_bus_ifpga.a INSTALL-LIB librte_bus_ifpga.a CC vdev_params.o CC linux/pci_vfio.o CC pci_params.o CC pci_common.o CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o AR librte_bus_vdev.a INSTALL-LIB librte_bus_vdev.a CC mc/dpcon.o CC pci_common_uio.o CC base/fman/netcfg_layer.o CC vmbus_common_uio.o CC base/qbman/process.o CC base/qbman/bman.o CC base/qbman/bman_driver.o AR librte_bus_vmbus.a CC base/qbman/qman.o INSTALL-LIB librte_bus_vmbus.a CC base/qbman/qman_driver.o CC base/qbman/dpaa_alloc.o CC mc/dpci.o LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko CC mc/dpdmai.o INSTALL-MODULE igb_uio.ko CC portal/dpaa2_hw_dpio.o CC portal/dpaa2_hw_dpbp.o CC portal/dpaa2_hw_dpci.o CC fslmc_vfio.o AR librte_bus_pci.a INSTALL-LIB librte_bus_pci.a CC fslmc_bus.o CC base/qbman/dpaa_sys.o PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c CC portal/dpaa2_hw_dpbp.o.pmd.o PMDINFO portal/dpaa2_hw_dpci.o.pmd.c CC portal/dpaa2_hw_dpci.o.pmd.o PMDINFO portal/dpaa2_hw_dpio.o.pmd.c CC portal/dpaa2_hw_dpio.o.pmd.o LD portal/dpaa2_hw_dpbp.o LD portal/dpaa2_hw_dpci.o LD portal/dpaa2_hw_dpio.o AR librte_bus_fslmc.a INSTALL-LIB librte_bus_fslmc.a AR librte_bus_dpaa.a INSTALL-LIB librte_bus_dpaa.a == Build drivers/mempool == Build drivers/mempool/stack == Build drivers/mempool/bucket == Build drivers/mempool/dpaa == Build drivers/mempool/dpaa2 == Build drivers/mempool/ring == Build drivers/mempool/octeontx2 == Build drivers/mempool/octeontx CC rte_mempool_ring.o SYMLINK-FILE include/rte_dpaa2_mempool.h CC dpaa2_hw_mempool.o CC rte_mempool_stack.o CC dpaa_mempool.o CC otx2_mempool_ops.o CC otx2_mempool.o CC otx2_mempool_irq.o CC otx2_mempool_debug.o CC rte_mempool_bucket.o CC octeontx_fpavf.o CC rte_mempool_octeontx.o PMDINFO otx2_mempool.o.pmd.c CC otx2_mempool.o.pmd.o LD otx2_mempool.o AR librte_mempool_dpaa.a AR librte_mempool_dpaa2.a INSTALL-LIB librte_mempool_dpaa.a INSTALL-LIB librte_mempool_dpaa2.a AR librte_mempool_ring.a PMDINFO octeontx_fpavf.o.pmd.c CC octeontx_fpavf.o.pmd.o INSTALL-LIB librte_mempool_ring.a LD octeontx_fpavf.o AR librte_mempool_octeontx.a INSTALL-LIB librte_mempool_octeontx.a AR librte_mempool_stack.a INSTALL-LIB librte_mempool_stack.a AR librte_mempool_octeontx2.a INSTALL-LIB librte_mempool_octeontx2.a AR librte_mempool_bucket.a INSTALL-LIB librte_mempool_bucket.a == Build drivers/net == Build drivers/crypto == Build drivers/baseband == Build drivers/common/qat == Build drivers/compress == Build drivers/vdpa == Build drivers/compress/octeontx == Build drivers/crypto/octeontx == Build drivers/crypto/scheduler == Build drivers/crypto/octeontx2 == Build drivers/vdpa/ifc == Build drivers/crypto/null == Build drivers/crypto/dpaa2_sec == Build drivers/crypto/caam_jr == Build drivers/crypto/dpaa_sec == Build drivers/crypto/virtio == Build drivers/crypto/nitrox CC qat_comp.o == Build drivers/baseband/null == Build drivers/net/af_packet CC nitrox_device.o CC ifcvf_vdpa.o SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h CC otx_zip_pmd.o CC bbdev_null.o CC virtqueue.o CC null_crypto_pmd.o CC rte_eth_af_packet.o CC otx2_cryptodev.o CC otx_cryptodev.o SYMLINK-FILE include/rte_cryptodev_scheduler.h CC dpaa_sec.o CC dpaa2_sec_dpseci.o CC scheduler_pmd.o CC caam_jr.o PMDINFO otx_cryptodev.o.pmd.c CC otx_cryptodev.o.pmd.o LD otx_cryptodev.o CC otx_cryptodev_capabilities.o PMDINFO nitrox_device.o.pmd.c CC nitrox_device.o.pmd.o LD nitrox_device.o CC nitrox_hal.o PMDINFO otx2_cryptodev.o.pmd.c CC otx2_cryptodev.o.pmd.o CC scheduler_pmd_ops.o LD otx2_cryptodev.o CC otx2_cryptodev_capabilities.o CC virtio_pci.o CC nitrox_logs.o CC nitrox_sym.o CC qat_comp_pmd.o CC otx_cryptodev_hw_access.o PMDINFO ifcvf_vdpa.o.pmd.c CC ifcvf_vdpa.o.pmd.o LD ifcvf_vdpa.o CC ifcvf.o PMDINFO rte_eth_af_packet.o.pmd.c CC rte_eth_af_packet.o.pmd.o LD rte_eth_af_packet.o AR librte_pmd_af_packet.a INSTALL-LIB librte_pmd_af_packet.a == Build drivers/net/ark CC otx2_cryptodev_hw_access.o PMDINFO null_crypto_pmd.o.pmd.c CC null_crypto_pmd.o.pmd.o PMDINFO otx_zip_pmd.o.pmd.c CC otx_zip_pmd.o.pmd.o LD null_crypto_pmd.o LD otx_zip_pmd.o CC null_crypto_pmd_ops.o CC otx_zip.o AR librte_pmd_ifc.a INSTALL-LIB librte_pmd_ifc.a CC otx2_cryptodev_mbox.o CC rte_cryptodev_scheduler.o CC virtio_rxtx.o CC ark_ddm.o CC otx_cryptodev_mbox.o CC ark_ethdev.o CC qat_device.o PMDINFO bbdev_null.o.pmd.c CC bbdev_null.o.pmd.o LD bbdev_null.o AR librte_pmd_bbdev_null.a INSTALL-LIB librte_pmd_bbdev_null.a == Build drivers/baseband/turbo_sw CC nitrox_sym_capabilities.o CC ark_ethdev_rx.o AR librte_pmd_octeontx_zip.a INSTALL-LIB librte_pmd_octeontx_zip.a CC ark_ethdev_tx.o AR librte_pmd_null_crypto.a INSTALL-LIB librte_pmd_null_crypto.a CC ark_mpu.o CC otx2_cryptodev_ops.o CC bbdev_turbo_software.o CC nitrox_sym_reqmgr.o CC otx_cryptodev_ops.o PMDINFO qat_device.o.pmd.c CC qat_device.o.pmd.o LD qat_device.o CC scheduler_roundrobin.o CC virtio_cryptodev.o CC qat_common.o CC scheduler_pkt_size_distr.o PMDINFO ark_ethdev.o.pmd.c CC ark_ethdev.o.pmd.o LD ark_ethdev.o CC scheduler_failover.o CC nitrox_qp.o CC ark_pktchkr.o CC scheduler_multicore.o CC qat_logs.o CC qat_qp.o CC ark_pktdir.o AR librte_pmd_nitrox.a INSTALL-LIB librte_pmd_nitrox.a CC ark_pktgen.o PMDINFO virtio_cryptodev.o.pmd.c CC virtio_cryptodev.o.pmd.o == Build drivers/baseband/fpga_lte_fec LD virtio_cryptodev.o AR librte_pmd_virtio_crypto.a INSTALL-LIB librte_pmd_virtio_crypto.a == Build drivers/net/atlantic == Build drivers/net/avp PMDINFO caam_jr.o.pmd.c CC caam_jr.o.pmd.o LD caam_jr.o CC caam_jr_capabilities.o == Build drivers/net/axgbe SYMLINK-FILE include/fpga_lte_fec.h CC fpga_lte_fec.o CC atl_rxtx.o SYMLINK-FILE include/rte_avp_common.h SYMLINK-FILE include/rte_avp_fifo.h CC ark_rqp.o CC avp_ethdev.o AR librte_pmd_qat.a INSTALL-LIB librte_pmd_qat.a == Build drivers/baseband/fpga_5gnr_fec CC axgbe_ethdev.o CC atl_ethdev.o CC caam_jr_hw.o CC ark_udm.o SYMLINK-FILE include/rte_pmd_fpga_5gnr_fec.h CC rte_fpga_5gnr_fec.o AR librte_pmd_ark.a INSTALL-LIB librte_pmd_ark.a CC caam_jr_uio.o PMDINFO bbdev_turbo_software.o.pmd.c CC bbdev_turbo_software.o.pmd.o LD bbdev_turbo_software.o AR librte_pmd_bbdev_turbo_sw.a INSTALL-LIB librte_pmd_bbdev_turbo_sw.a == Build drivers/net/bonding CC atl_hw_regs.o CC axgbe_dev.o SYMLINK-FILE include/rte_eth_bond.h SYMLINK-FILE include/rte_eth_bond_8023ad.h CC rte_eth_bond_api.o PMDINFO fpga_lte_fec.o.pmd.c CC fpga_lte_fec.o.pmd.o LD fpga_lte_fec.o PMDINFO axgbe_ethdev.o.pmd.c CC axgbe_ethdev.o.pmd.o AR librte_pmd_bbdev_fpga_lte_fec.a INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a LD axgbe_ethdev.o CC axgbe_mdio.o CC rte_eth_bond_pmd.o AR librte_pmd_caam_jr.a INSTALL-LIB librte_pmd_caam_jr.a CC axgbe_phy_impl.o PMDINFO atl_ethdev.o.pmd.c CC atl_ethdev.o.pmd.o LD atl_ethdev.o CC rte_eth_bond_args.o CC hw_atl_utils.o PMDINFO rte_fpga_5gnr_fec.o.pmd.c CC rte_fpga_5gnr_fec.o.pmd.o LD rte_fpga_5gnr_fec.o AR librte_pmd_bbdev_fpga_5gnr_fec.a INSTALL-LIB librte_pmd_bbdev_fpga_5gnr_fec.a CC rte_eth_bond_8023ad.o AR librte_pmd_crypto_scheduler.a INSTALL-LIB librte_pmd_crypto_scheduler.a CC hw_atl_llh.o PMDINFO dpaa_sec.o.pmd.c CC dpaa_sec.o.pmd.o LD dpaa_sec.o AR librte_pmd_dpaa_sec.a INSTALL-LIB librte_pmd_dpaa_sec.a CC hw_atl_utils_fw2x.o CC rte_eth_bond_alb.o PMDINFO avp_ethdev.o.pmd.c CC avp_ethdev.o.pmd.o LD avp_ethdev.o AR librte_pmd_avp.a INSTALL-LIB librte_pmd_avp.a CC rte_eth_bond_flow.o PMDINFO dpaa2_sec_dpseci.o.pmd.c CC dpaa2_sec_dpseci.o.pmd.o LD dpaa2_sec_dpseci.o == Build drivers/net/cxgbe CC mc/dpseci.o == Build drivers/net/dpaa == Build drivers/net/dpaa2 CC axgbe_i2c.o CC axgbe_rxtx.o AR librte_pmd_dpaa2_sec.a INSTALL-LIB librte_pmd_dpaa2_sec.a SYMLINK-FILE include/rte_pmd_dpaa.h CC cxgbe_ethdev.o CC axgbe_rxtx_vec_sse.o SYMLINK-FILE include/rte_pmd_dpaa2.h CC cxgbevf_ethdev.o CC dpaa_ethdev.o CC base/dpaa2_hw_dpni.o CC dpaa2_rxtx.o CC dpaa_rxtx.o CC hw_atl_b0.o CC rte_pmd_atlantic.o CC dpaa2_ethdev.o CC dpaa2_flow.o PMDINFO cxgbevf_ethdev.o.pmd.c CC cxgbevf_ethdev.o.pmd.o CC cxgbe_main.o LD cxgbevf_ethdev.o CC dpaa2_mux.o PMDINFO dpaa_ethdev.o.pmd.c CC dpaa_ethdev.o.pmd.o AR librte_pmd_atlantic.a INSTALL-LIB librte_pmd_atlantic.a CC dpaa2_sparser.o LD dpaa_ethdev.o CC cxgbevf_main.o PMDINFO cxgbe_ethdev.o.pmd.c CC cxgbe_ethdev.o.pmd.o LD cxgbe_ethdev.o CC sge.o AR librte_pmd_axgbe.a INSTALL-LIB librte_pmd_axgbe.a CC cxgbe_filter.o PMDINFO dpaa2_mux.o.pmd.c CC dpaa2_mux.o.pmd.o LD dpaa2_mux.o == Build drivers/net/e1000 == Build drivers/net/ena PMDINFO rte_eth_bond_pmd.o.pmd.c CC rte_eth_bond_pmd.o.pmd.o LD rte_eth_bond_pmd.o AR librte_pmd_bond.a INSTALL-LIB librte_pmd_bond.a CC cxgbe_flow.o CC t4_hw.o CC e1000_80003es2lan.o CC mc/dpni.o CC ena_ethdev.o PMDINFO dpaa2_ethdev.o.pmd.c CC dpaa2_ethdev.o.pmd.o LD dpaa2_ethdev.o CC ena_com.o CC e1000_82540.o CC e1000_82541.o CC e1000_82542.o CC e1000_82543.o CC mc/dpkg.o CC mc/dpdmux.o CC ena_eth_com.o CC e1000_82571.o == Build drivers/net/enetc == Build drivers/net/enic == Build drivers/net/failsafe CC clip_tbl.o == Build drivers/net/fm10k AR librte_pmd_dpaa2.a INSTALL-LIB librte_pmd_dpaa2.a CC e1000_82575.o CC enetc_ethdev.o CC enic_ethdev.o CC failsafe.o CC enic_main.o AR librte_pmd_dpaa.a INSTALL-LIB librte_pmd_dpaa.a CC enic_rxtx.o == Build drivers/net/hinic CC fm10k_ethdev.o AR librte_pmd_octeontx2_crypto.a INSTALL-LIB librte_pmd_octeontx2_crypto.a CC fm10k_rxtx.o == Build drivers/net/hns3 CC hinic_pmd_api_cmd.o CC hinic_pmd_cfg.o CC hns3_ethdev.o PMDINFO failsafe.o.pmd.c CC failsafe.o.pmd.o LD failsafe.o CC failsafe_args.o PMDINFO ena_ethdev.o.pmd.c CC ena_ethdev.o.pmd.o LD ena_ethdev.o CC e1000_i210.o PMDINFO enic_ethdev.o.pmd.c CC enic_ethdev.o.pmd.o AR librte_pmd_ena.a LD enic_ethdev.o INSTALL-LIB librte_pmd_ena.a CC e1000_api.o == Build drivers/net/i40e == Build drivers/net/iavf PMDINFO enetc_ethdev.o.pmd.c CC enetc_ethdev.o.pmd.o LD enetc_ethdev.o CC enetc_rxtx.o CC hinic_pmd_cmdq.o SYMLINK-FILE include/rte_pmd_i40e.h CC i40e_adminq.o CC enic_clsf.o CC e1000_ich8lan.o CC iavf_ethdev.o CC mps_tcam.o CC l2t.o CC enic_res.o CC failsafe_eal.o CC hinic_pmd_eqs.o PMDINFO fm10k_ethdev.o.pmd.c CC fm10k_ethdev.o.pmd.o AR librte_pmd_enetc.a LD fm10k_ethdev.o INSTALL-LIB librte_pmd_enetc.a CC hinic_pmd_hwdev.o CC fm10k_pf.o CC hinic_pmd_hwif.o CC hinic_pmd_mgmt.o CC i40e_common.o CC i40e_diag.o CC smt.o CC enic_flow.o CC failsafe_ops.o CC enic_fm_flow.o CC failsafe_rxtx.o CC failsafe_ether.o PMDINFO iavf_ethdev.o.pmd.c CC iavf_ethdev.o.pmd.o LD iavf_ethdev.o CC failsafe_flow.o CC iavf_vchnl.o CC fm10k_tlv.o CC e1000_logs.o CC t4vf_hw.o AR librte_pmd_octeontx_crypto.a INSTALL-LIB librte_pmd_octeontx_crypto.a CC hinic_pmd_niccfg.o CC e1000_mac.o CC e1000_manage.o CC fm10k_common.o CC fm10k_mbx.o CC fm10k_vf.o CC e1000_mbx.o PMDINFO hns3_ethdev.o.pmd.c CC hns3_ethdev.o.pmd.o LD hns3_ethdev.o CC hns3_ethdev_vf.o CC hns3_cmd.o CC hns3_mbx.o CC hns3_rxtx.o CC fm10k_api.o CC base/vnic_cq.o CC e1000_nvm.o CC base/vnic_wq.o CC base/vnic_dev.o CC fm10k_rxtx_vec.o CC iavf_rxtx.o CC iavf_generic_flow.o AR librte_pmd_cxgbe.a CC e1000_osdep.o INSTALL-LIB librte_pmd_cxgbe.a CC iavf_fdir.o CC iavf_hash.o CC hns3_rss.o CC e1000_phy.o CC base/vnic_intr.o CC hinic_pmd_nicio.o CC hinic_pmd_wq.o CC failsafe_intr.o CC hinic_pmd_mbox.o PMDINFO hns3_ethdev_vf.o.pmd.c CC hns3_ethdev_vf.o.pmd.o CC hinic_pmd_flow.o LD hns3_ethdev_vf.o CC i40e_hmc.o CC hinic_pmd_ethdev.o CC hns3_flow.o CC i40e_lan_hmc.o CC base/vnic_rq.o CC enic_rxtx_vec_avx2.o AR librte_pmd_fm10k.a INSTALL-LIB librte_pmd_fm10k.a CC iavf_rxtx_vec_sse.o CC e1000_vf.o AR librte_pmd_failsafe.a INSTALL-LIB librte_pmd_failsafe.a CC igb_ethdev.o CC igb_rxtx.o CC iavf_rxtx_vec_avx2.o CC hinic_pmd_rx.o CC hinic_pmd_tx.o CC hns3_fdir.o CC igb_pf.o CC i40e_nvm.o AR librte_pmd_enic.a INSTALL-LIB librte_pmd_enic.a CC i40e_dcb.o == Build drivers/net/ice == Build drivers/net/igc PMDINFO hinic_pmd_ethdev.o.pmd.c CC hinic_pmd_ethdev.o.pmd.o LD hinic_pmd_ethdev.o == Build drivers/net/ionic CC hns3_intr.o CC igc_api.o SYMLINK-FILE include/rte_pmd_ice.h CC ice_controlq.o CC ice_common.o CC igb_flow.o CC em_ethdev.o CC ionic_mac_api.o CC ionic_rx_filter.o CC em_rxtx.o CC igc_base.o CC i40e_ethdev.o CC igc_i225.o AR librte_pmd_hinic.a INSTALL-LIB librte_pmd_hinic.a CC hns3_stats.o CC hns3_regs.o CC ionic_rxtx.o CC ionic_dev.o CC ionic_ethdev.o CC igc_mac.o PMDINFO em_ethdev.o.pmd.c CC em_ethdev.o.pmd.o LD em_ethdev.o CC ionic_lif.o CC ionic_main.o CC ice_sched.o AR librte_pmd_iavf.a INSTALL-LIB librte_pmd_iavf.a CC ice_switch.o PMDINFO igb_ethdev.o.pmd.c CC igb_ethdev.o.pmd.o LD igb_ethdev.o == Build drivers/net/ixgbe == Build drivers/net/liquidio == Build drivers/net/memif CC igc_manage.o CC hns3_dcb.o CC lio_ethdev.o SYMLINK-FILE include/rte_pmd_ixgbe.h CC ixgbe_common.o CC ixgbe_82598.o CC igc_nvm.o PMDINFO ionic_ethdev.o.pmd.c CC ionic_ethdev.o.pmd.o CC rte_eth_memif.o LD ionic_ethdev.o CC igc_osdep.o CC memif_socket.o CC ixgbe_82599.o CC ixgbe_x540.o AR librte_pmd_e1000.a INSTALL-LIB librte_pmd_e1000.a CC ice_nvm.o == Build drivers/net/netvsc AR librte_pmd_ionic.a INSTALL-LIB librte_pmd_ionic.a CC igc_phy.o CC igc_logs.o CC ice_flex_pipe.o CC ice_flow.o CC hn_ethdev.o CC hn_rxtx.o PMDINFO lio_ethdev.o.pmd.c CC lio_ethdev.o.pmd.o LD lio_ethdev.o CC hn_rndis.o CC lio_rxtx.o CC hn_nvs.o CC hns3_mp.o CC ixgbe_x550.o PMDINFO hn_ethdev.o.pmd.c CC hn_ethdev.o.pmd.o LD hn_ethdev.o PMDINFO rte_eth_memif.o.pmd.c CC rte_eth_memif.o.pmd.o CC igc_ethdev.o LD rte_eth_memif.o CC ixgbe_phy.o CC ixgbe_api.o AR librte_pmd_memif.a INSTALL-LIB librte_pmd_memif.a CC ixgbe_vf.o AR librte_pmd_hns3.a INSTALL-LIB librte_pmd_hns3.a CC hn_vf.o CC ixgbe_hv_vf.o == Build drivers/net/nfp CC i40e_rxtx.o CC i40e_rxtx_vec_sse.o CC nfp_cppcore.o CC nfp_cpp_pcie_ops.o CC nfp_mutex.o CC lio_23xx_vf.o CC lio_mbox.o AR librte_pmd_netvsc.a INSTALL-LIB librte_pmd_netvsc.a CC ice_dcb.o CC ixgbe_dcb.o CC ixgbe_dcb_82599.o PMDINFO igc_ethdev.o.pmd.c CC igc_ethdev.o.pmd.o LD igc_ethdev.o CC igc_txrx.o CC igc_filter.o CC i40e_ethdev_vf.o CC i40e_pf.o CC i40e_fdir.o AR librte_pmd_lio.a CC i40e_flow.o INSTALL-LIB librte_pmd_lio.a CC rte_pmd_i40e.o CC nfp_resource.o CC nfp_crc.o CC ixgbe_dcb_82598.o CC ixgbe_mbx.o CC ixgbe_rxtx.o CC ixgbe_ethdev.o CC ice_fdir.o CC ice_acl.o CC nfp_mip.o CC ixgbe_fdir.o CC ixgbe_pf.o PMDINFO i40e_ethdev.o.pmd.c CC i40e_ethdev.o.pmd.o LD i40e_ethdev.o CC nfp_nffw.o CC ice_acl_ctrl.o CC nfp_hwinfo.o CC i40e_tm.o PMDINFO i40e_ethdev_vf.o.pmd.c CC i40e_ethdev_vf.o.pmd.o LD i40e_ethdev_vf.o CC nfp_rtsym.o CC nfp_nsp.o CC igc_flow.o CC ice_ethdev.o CC ice_rxtx.o CC ice_rxtx_vec_sse.o CC i40e_vf_representor.o CC ice_switch_filter.o CC ice_fdir_filter.o CC ice_hash.o CC ice_rxtx_vec_avx2.o CC ice_generic_flow.o CC i40e_rxtx_vec_avx2.o CC nfp_nsp_cmds.o CC nfp_nsp_eth.o AR librte_pmd_igc.a INSTALL-LIB librte_pmd_igc.a CC nfp_net.o == Build drivers/net/bnxt == Build drivers/net/null SYMLINK-FILE include/rte_pmd_bnxt.h CC bnxt_cpr.o == Build drivers/net/octeontx CC rte_eth_null.o CC bnxt_ethdev.o CC ice_dcf.o CC bnxt_filter.o CC octeontx_rxtx.o CC octeontx_pkovf.o PMDINFO ixgbe_ethdev.o.pmd.c CC ixgbe_ethdev.o.pmd.o LD ixgbe_ethdev.o CC bnxt_flow.o PMDINFO octeontx_pkovf.o.pmd.c CC octeontx_pkovf.o.pmd.o CC ixgbe_flow.o LD octeontx_pkovf.o CC bnxt_hwrm.o CC bnxt_ring.o AR librte_pmd_i40e.a CC octeontx_pkivf.o INSTALL-LIB librte_pmd_i40e.a CC ice_dcf_ethdev.o PMDINFO octeontx_pkivf.o.pmd.c CC octeontx_pkivf.o.pmd.o LD octeontx_pkivf.o CC ice_dcf_parent.o CC octeontx_bgx.o PMDINFO ice_ethdev.o.pmd.c CC ice_ethdev.o.pmd.o LD ice_ethdev.o CC bnxt_rxq.o CC bnxt_rxr.o CC bnxt_stats.o PMDINFO rte_eth_null.o.pmd.c CC rte_eth_null.o.pmd.o LD rte_eth_null.o PMDINFO nfp_net.o.pmd.c CC nfp_net.o.pmd.o AR librte_pmd_null.a INSTALL-LIB librte_pmd_null.a LD nfp_net.o == Build drivers/net/octeontx2 AR librte_pmd_nfp.a INSTALL-LIB librte_pmd_nfp.a CC bnxt_txq.o PMDINFO ice_dcf_ethdev.o.pmd.c CC ice_dcf_ethdev.o.pmd.o LD ice_dcf_ethdev.o == Build drivers/net/qede == Build drivers/net/ring CC otx2_rx.o CC octeontx_ethdev.o == Build drivers/net/sfc AR librte_pmd_ice.a INSTALL-LIB librte_pmd_ice.a CC octeontx_ethdev_ops.o CC ixgbe_rxtx_vec_sse.o SYMLINK-FILE include/rte_eth_ring.h CC rte_eth_ring.o CC ecore_dev.o CC ixgbe_ipsec.o CC ecore_hw.o CC sfc_ethdev.o CC sfc_kvargs.o PMDINFO octeontx_ethdev.o.pmd.c CC octeontx_ethdev.o.pmd.o LD octeontx_ethdev.o CC bnxt_txr.o CC sfc.o AR librte_pmd_octeontx.a INSTALL-LIB librte_pmd_octeontx.a CC bnxt_vnic.o == Build drivers/net/tap PMDINFO bnxt_ethdev.o.pmd.c CC bnxt_ethdev.o.pmd.o LD bnxt_ethdev.o CC sfc_mcdi.o CC bnxt_irq.o CC rte_eth_tap.o CC tap_flow.o CC tap_netlink.o CC tap_tcmsgs.o CC bnxt_util.o CC sfc_intr.o CC rte_pmd_bnxt.o CC bnxt_rxtx_vec_sse.o CC tf_core/tf_core.o PMDINFO rte_eth_ring.o.pmd.c CC rte_eth_ring.o.pmd.o LD rte_eth_ring.o AR librte_pmd_ring.a INSTALL-LIB librte_pmd_ring.a CC tf_core/bitalloc.o CC rte_pmd_ixgbe.o PMDINFO sfc_ethdev.o.pmd.c CC sfc_ethdev.o.pmd.o CC ixgbe_tm.o LD sfc_ethdev.o CC ixgbe_vf_representor.o CC tf_core/tf_msg.o CC sfc_ev.o CC tf_core/rand.o CC sfc_port.o CC tap_bpf_api.o CC tf_core/stack.o CC tap_intr.o CC sfc_rx.o CC tf_core/tf_em.o CC sfc_tx.o CC sfc_tso.o CC sfc_filter.o AR librte_pmd_ixgbe.a INSTALL-LIB librte_pmd_ixgbe.a CC tf_core/tf_rm.o == Build drivers/net/thunderx == Build drivers/net/vdev_netvsc == Build drivers/net/virtio CC tf_core/tf_tbl.o == Build drivers/net/vmxnet3 CC nicvf_rxtx.o CC vdev_netvsc.o CC nicvf_hw.o CC virtqueue.o CC virtio_pci.o CC vmxnet3_rxtx.o CC vmxnet3_ethdev.o PMDINFO rte_eth_tap.o.pmd.c CC rte_eth_tap.o.pmd.o LD rte_eth_tap.o AR librte_pmd_tap.a INSTALL-LIB librte_pmd_tap.a CC sfc_flow.o CC sfc_dp.o CC ecore_cxt.o CC ecore_l2.o CC nicvf_mbox.o CC nicvf_ethdev.o CC sfc_ef10_rx.o PMDINFO vdev_netvsc.o.pmd.c CC vdev_netvsc.o.pmd.o CC virtio_rxtx.o LD vdev_netvsc.o AR librte_pmd_vdev_netvsc.a INSTALL-LIB librte_pmd_vdev_netvsc.a CC virtio_ethdev.o == Build drivers/net/kni == Build drivers/net/softnic == Build drivers/net/vhost PMDINFO vmxnet3_ethdev.o.pmd.c CC vmxnet3_ethdev.o.pmd.o LD vmxnet3_ethdev.o CC tf_core/tfp.o CC rte_eth_kni.o SYMLINK-FILE include/rte_eth_softnic.h CC rte_eth_softnic.o SYMLINK-FILE include/rte_eth_vhost.h CC rte_eth_vhost.o CC rte_eth_softnic_mempool.o PMDINFO nicvf_ethdev.o.pmd.c CC nicvf_ethdev.o.pmd.o LD nicvf_ethdev.o CC nicvf_bsvf.o AR librte_pmd_vmxnet3_uio.a INSTALL-LIB librte_pmd_vmxnet3_uio.a CC rte_eth_softnic_swq.o CC nicvf_svf.o CC sfc_ef10_essb_rx.o CC tf_ulp/bnxt_ulp.o CC tf_ulp/ulp_mark_mgr.o PMDINFO rte_eth_softnic.o.pmd.c CC rte_eth_softnic.o.pmd.o LD rte_eth_softnic.o CC tf_ulp/ulp_flow_db.o CC sfc_ef10_tx.o PMDINFO rte_eth_kni.o.pmd.c CC rte_eth_kni.o.pmd.o CC efx_bootcfg.o CC ecore_sp_commands.o LD rte_eth_kni.o AR librte_pmd_kni.a INSTALL-LIB librte_pmd_kni.a CC efx_crc32.o AR librte_pmd_thunderx_nicvf.a INSTALL-LIB librte_pmd_thunderx_nicvf.a CC efx_ev.o CC rte_eth_softnic_link.o CC rte_eth_softnic_tm.o CC rte_eth_softnic_tap.o PMDINFO rte_eth_vhost.o.pmd.c CC rte_eth_vhost.o.pmd.o CC rte_eth_softnic_action.o LD rte_eth_vhost.o AR librte_pmd_vhost.a INSTALL-LIB librte_pmd_vhost.a CC rte_eth_softnic_pipeline.o PMDINFO virtio_ethdev.o.pmd.c CC virtio_ethdev.o.pmd.o CC ecore_init_fw_funcs.o CC ecore_spq.o CC ecore_init_ops.o LD virtio_ethdev.o CC ecore_mcp.o CC ecore_int.o CC tf_ulp/ulp_template_db.o CC tf_ulp/ulp_utils.o CC tf_ulp/ulp_mapper.o CC tf_ulp/ulp_matcher.o CC rte_eth_softnic_thread.o CC rte_eth_softnic_cli.o CC tf_ulp/ulp_rte_parser.o CC rte_eth_softnic_flow.o CC tf_ulp/bnxt_ulp_flow.o CC rte_eth_softnic_meter.o CC efx_evb.o CC efx_filter.o CC tf_ulp/ulp_port_db.o CC rte_eth_softnic_cryptodev.o CC ecore_dcbx.o CC bcm_osal.o CC efx_hash.o CC ecore_sriov.o CC parser.o CC ecore_vf.o CC conn.o CC virtio_rxtx_simple.o AR librte_pmd_bnxt.a CC virtio_rxtx_simple_sse.o INSTALL-LIB librte_pmd_bnxt.a CC virtio_user/vhost_user.o CC qede_ethdev.o CC virtio_user/vhost_kernel.o CC efx_intr.o CC efx_lic.o CC efx_mac.o CC efx_mcdi.o CC virtio_user/vhost_kernel_tap.o CC virtio_user/virtio_user_dev.o CC efx_mon.o CC virtio_user_ethdev.o CC efx_nic.o CC efx_nvram.o CC efx_phy.o AR librte_pmd_softnic.a INSTALL-LIB librte_pmd_softnic.a CC efx_port.o CC efx_proxy.o CC otx2_tx.o CC efx_rx.o CC otx2_tm.o PMDINFO virtio_user_ethdev.o.pmd.c CC virtio_user_ethdev.o.pmd.o LD virtio_user_ethdev.o CC otx2_rss.o CC otx2_mac.o CC otx2_ptp.o CC otx2_flow.o AR librte_pmd_virtio.a INSTALL-LIB librte_pmd_virtio.a CC qede_main.o CC qede_rxtx.o CC qede_filter.o CC otx2_link.o PMDINFO qede_ethdev.o.pmd.c CC qede_ethdev.o.pmd.o LD qede_ethdev.o CC otx2_vlan.o CC efx_sram.o CC otx2_stats.o CC efx_tunnel.o CC efx_tx.o CC efx_vpd.o CC mcdi_mon.o CC siena_mac.o CC otx2_mcast.o CC otx2_lookup.o CC otx2_ethdev.o CC siena_mcdi.o CC siena_nic.o CC siena_nvram.o CC siena_phy.o CC siena_sram.o CC siena_vpd.o CC otx2_flow_ctrl.o CC otx2_flow_parse.o CC ef10_ev.o CC otx2_flow_utils.o CC ef10_evb.o CC otx2_ethdev_irq.o CC otx2_ethdev_ops.o CC ef10_filter.o CC otx2_ethdev_sec.o CC otx2_ethdev_debug.o CC ef10_intr.o CC ef10_image.o AR librte_pmd_qede.a INSTALL-LIB librte_pmd_qede.a CC ef10_mac.o CC otx2_ethdev_devargs.o CC ef10_mcdi.o CC ef10_nic.o CC ef10_nvram.o CC ef10_phy.o CC ef10_proxy.o CC ef10_rx.o PMDINFO otx2_ethdev.o.pmd.c CC otx2_ethdev.o.pmd.o LD otx2_ethdev.o CC ef10_tx.o CC ef10_vpd.o CC hunt_nic.o CC medford_nic.o CC medford2_nic.o AR librte_pmd_sfc_efx.a INSTALL-LIB librte_pmd_sfc_efx.a AR librte_pmd_octeontx2.a INSTALL-LIB librte_pmd_octeontx2.a == Build drivers/event == Build drivers/event/dsw == Build drivers/event/octeontx == Build drivers/event/skeleton == Build drivers/event/sw == Build drivers/event/dpaa == Build drivers/event/octeontx2 == Build drivers/event/dpaa2 == Build drivers/event/opdl CC dsw_evdev.o CC dsw_event.o CC dpaa_eventdev.o CC dsw_xstats.o CC skeleton_eventdev.o CC otx2_worker_dual.o CC dpaa2_hw_dpcon.o CC otx2_worker.o CC dpaa2_eventdev.o CC dpaa2_eventdev_selftest.o CC otx2_tim_worker.o CC ssovf_worker.o CC opdl_ring.o CC sw_evdev.o PMDINFO skeleton_eventdev.o.pmd.c CC skeleton_eventdev.o.pmd.o LD skeleton_eventdev.o AR librte_pmd_skeleton_event.a INSTALL-LIB librte_pmd_skeleton_event.a CC sw_evdev_worker.o CC sw_evdev_scheduler.o PMDINFO dpaa2_hw_dpcon.o.pmd.c CC dpaa2_hw_dpcon.o.pmd.o LD dpaa2_hw_dpcon.o CC sw_evdev_xstats.o PMDINFO dsw_evdev.o.pmd.c CC dsw_evdev.o.pmd.o LD dsw_evdev.o CC sw_evdev_selftest.o CC opdl_evdev.o PMDINFO sw_evdev.o.pmd.c CC sw_evdev.o.pmd.o PMDINFO dpaa2_eventdev.o.pmd.c CC dpaa2_eventdev.o.pmd.o LD sw_evdev.o LD dpaa2_eventdev.o CC opdl_evdev_init.o AR librte_pmd_dpaa2_event.a INSTALL-LIB librte_pmd_dpaa2_event.a CC opdl_evdev_xstats.o CC ssovf_evdev.o PMDINFO dpaa_eventdev.o.pmd.c CC dpaa_eventdev.o.pmd.o LD dpaa_eventdev.o PMDINFO opdl_evdev.o.pmd.c CC opdl_evdev.o.pmd.o LD opdl_evdev.o AR librte_pmd_dpaa_event.a INSTALL-LIB librte_pmd_dpaa_event.a CC otx2_evdev.o CC otx2_evdev_adptr.o CC otx2_tim_evdev.o CC otx2_evdev_selftest.o CC otx2_evdev_irq.o PMDINFO ssovf_evdev.o.pmd.c CC ssovf_evdev.o.pmd.o LD ssovf_evdev.o CC opdl_test.o CC ssovf_evdev_selftest.o CC ssovf_probe.o CC timvf_worker.o CC timvf_evdev.o CC timvf_probe.o AR librte_pmd_dsw_event.a INSTALL-LIB librte_pmd_dsw_event.a PMDINFO ssovf_probe.o.pmd.c CC ssovf_probe.o.pmd.o LD ssovf_probe.o AR librte_pmd_opdl_event.a INSTALL-LIB librte_pmd_opdl_event.a PMDINFO timvf_probe.o.pmd.c CC timvf_probe.o.pmd.o LD timvf_probe.o AR librte_pmd_octeontx_ssovf.a INSTALL-LIB librte_pmd_octeontx_ssovf.a AR librte_pmd_sw_event.a INSTALL-LIB librte_pmd_sw_event.a PMDINFO otx2_evdev.o.pmd.c CC otx2_evdev.o.pmd.o LD otx2_evdev.o AR librte_pmd_octeontx2_event.a INSTALL-LIB librte_pmd_octeontx2_event.a == Build drivers/raw == Build drivers/raw/skeleton == Build drivers/raw/dpaa2_qdma == Build drivers/raw/dpaa2_cmdif == Build drivers/raw/octeontx2_ep == Build drivers/raw/ioat == Build drivers/raw/ntb == Build drivers/raw/octeontx2_dma SYMLINK-FILE include/rte_pmd_ntb.h CC ntb.o CC ntb_hw_intel.o SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h CC otx2_dpi_rawdev.o CC dpaa2_qdma.o CC otx2_dpi_test.o CC otx2_dpi_msg.o CC dpaa2_cmdif.o SYMLINK-FILE include/rte_ioat_rawdev.h SYMLINK-FILE include/rte_ioat_spec.h CC ioat_rawdev.o CC otx2_ep_rawdev.o CC skeleton_rawdev.o CC skeleton_rawdev_test.o CC ioat_rawdev_test.o CC otx2_ep_enqdeq.o CC otx2_ep_test.o CC otx2_ep_vf.o PMDINFO dpaa2_cmdif.o.pmd.c CC dpaa2_cmdif.o.pmd.o LD dpaa2_cmdif.o AR librte_rawdev_dpaa2_cmdif.a INSTALL-LIB librte_rawdev_dpaa2_cmdif.a PMDINFO otx2_ep_rawdev.o.pmd.c CC otx2_ep_rawdev.o.pmd.o PMDINFO ioat_rawdev.o.pmd.c CC ioat_rawdev.o.pmd.o LD otx2_ep_rawdev.o LD ioat_rawdev.o PMDINFO skeleton_rawdev.o.pmd.c CC skeleton_rawdev.o.pmd.o LD skeleton_rawdev.o AR librte_rawdev_ioat.a INSTALL-LIB librte_rawdev_ioat.a AR librte_rawdev_skeleton.a INSTALL-LIB librte_rawdev_skeleton.a PMDINFO otx2_dpi_rawdev.o.pmd.c CC otx2_dpi_rawdev.o.pmd.o AR librte_rawdev_octeontx2_ep.a INSTALL-LIB librte_rawdev_octeontx2_ep.a LD otx2_dpi_rawdev.o AR librte_rawdev_octeontx2_dma.a INSTALL-LIB librte_rawdev_octeontx2_dma.a PMDINFO ntb.o.pmd.c CC ntb.o.pmd.o PMDINFO dpaa2_qdma.o.pmd.c CC dpaa2_qdma.o.pmd.o LD ntb.o LD dpaa2_qdma.o AR librte_rawdev_ntb.a AR librte_rawdev_dpaa2_qdma.a INSTALL-LIB librte_rawdev_ntb.a INSTALL-LIB librte_rawdev_dpaa2_qdma.a == Build app == Build app/test-pmd == Build app/test == Build app/proc-info == Build app/pdump == Build app/test-cmdline == Build app/test-pipeline == Build app/test-fib == Build app/test-acl == Build app/test-bbdev == Build app/test-sad == Build app/test-compress-perf == Build app/test-crypto-perf == Build app/test-eventdev CC main.o CC main.o CC config.o CC main.o CC main.o CC main.o CC cmdline_test.o CC main.o CC testpmd.o CC main.o CC main.o CC main.o CC evt_main.o CC commands.o CC commands.o LD cmdline_test CC test_bbdev.o CC evt_options.o LD testsad LD testacl CC test_bbdev_perf.o CC init.o LD dpdk-procinfo CC cperf_ops.o CC comp_perf_options_parse.o LD dpdk-pdump CC test.o CC resource.o CC evt_test.o INSTALL-APP cmdline_test CC test_resource.o INSTALL-MAP cmdline_test.map CC runtime.o CC pipeline_stub.o CC parser.o CC test_prefetch.o CC test_order_common.o CC test_byteorder.o CC test_per_lcore.o INSTALL-APP testsad INSTALL-MAP testsad.map CC cperf_options_parsing.o INSTALL-APP testacl LD testfib INSTALL-MAP testacl.map CC cperf_test_vectors.o CC test_order_queue.o CC cperf_test_throughput.o CC comp_perf_test_verify.o CC test_atomic.o INSTALL-APP dpdk-procinfo INSTALL-MAP dpdk-procinfo.map CC test_barrier.o CC comp_perf_test_throughput.o INSTALL-APP dpdk-pdump INSTALL-MAP dpdk-pdump.map CC test_malloc.o CC comp_perf_test_cyclecount.o CC pipeline_hash.o CC comp_perf_test_common.o CC cperf_test_latency.o CC cperf_test_pmd_cyclecount.o CC test_cycles.o INSTALL-APP testfib INSTALL-MAP testfib.map CC test_mcslock.o CC test_order_atq.o CC test_perf_common.o CC cperf_test_verify.o CC test_perf_queue.o CC test_spinlock.o CC test_perf_atq.o CC test_ticketlock.o CC pipeline_lpm.o CC pipeline_lpm_ipv6.o CC test_memory.o CC parameters.o CC cmdline.o CC test_bbdev_vector.o CC test_memzone.o CC cperf_test_vector_parsing.o CC cperf_test_common.o CC test_pipeline_common.o LD dpdk-test-compress-perf CC test_pipeline_queue.o CC pipeline_acl.o CC test_pipeline_atq.o CC test_bitmap.o CC test_reciprocal_division.o CC test_reciprocal_division_perf.o CC test_fbarray.o CC cmdline_flow.o CC cmdline_mtr.o CC cmdline_tm.o LD testpipeline LD dpdk-test-crypto-perf CC config.o INSTALL-APP dpdk-test-compress-perf INSTALL-MAP dpdk-test-compress-perf.map CC test_external_mem.o CC iofwd.o CC macfwd.o CC macswap.o LD dpdk-test-eventdev CC flowgen.o CC test_rand_perf.o CC test_ring.o CC test_ring_mpmc_stress.o INSTALL-APP testpipeline INSTALL-MAP testpipeline.map CC test_ring_hts_stress.o CC rxonly.o INSTALL-APP dpdk-test-crypto-perf INSTALL-MAP dpdk-test-crypto-perf.map CC txonly.o CC test_ring_perf.o CC test_ring_peek_stress.o CC test_ring_rts_stress.o CC csumonly.o INSTALL-APP dpdk-test-eventdev INSTALL-MAP dpdk-test-eventdev.map CC test_ring_stress.o CC test_pmd_perf.o CC icmpecho.o CC noisy_vnf.o CC test_table.o CC test_table_pipeline.o CC bpf_cmd.o CC util.o CC test_table_tables.o CC softnicfwd.o CC test_table_ports.o CC test_table_combined.o CC test_table_acl.o CC test_flow_classify.o CC test_rwlock.o CC test_stack.o CC test_stack_perf.o CC test_timer.o CC test_timer_perf.o CC test_timer_racecond.o CC test_timer_secondary.o CC test_mempool.o CC test_mempool_perf.o CC test_mbuf.o CC test_logs.o CC test_memcpy.o LD testbbdev CC test_memcpy_perf.o CC test_member.o CC test_member_perf.o CC test_efd.o CC test_efd_perf.o LD testpmd CC test_hash.o CC test_thash.o CC test_hash_perf.o CC test_hash_functions.o CC test_hash_multiwriter.o INSTALL-APP testbbdev CC test_hash_readwrite.o INSTALL-MAP testbbdev.map CC test_hash_readwrite_lf_perf.o CC test_rib.o CC test_rib6.o CC test_fib.o CC test_fib6.o CC test_fib_perf.o INSTALL-APP testpmd INSTALL-MAP testpmd.map CC test_fib6_perf.o CC test_lpm.o CC test_lpm_perf.o CC test_lpm6.o CC test_lpm6_perf.o CC test_debug.o CC test_errno.o CC test_tailq.o CC test_string_fns.o CC test_cpuflags.o CC test_mp_secondary.o CC test_eal_flags.o CC test_eal_fs.o CC test_alarm.o CC test_interrupts.o CC test_version.o CC test_func_reentrancy.o CC test_trace.o CC test_trace_register.o CC test_trace_perf.o CC test_service_cores.o CC sample_packet_forward.o CC test_bitratestats.o CC test_latencystats.o CC test_pdump.o CC test_cmdline.o CC test_cmdline_num.o CC test_cmdline_etheraddr.o CC test_cmdline_portlist.o CC test_cmdline_ipaddr.o CC test_cmdline_cirbuf.o CC test_cmdline_string.o CC test_cmdline_lib.o CC test_crc.o CC test_red.o CC test_sched.o CC test_meter.o CC test_kni.o CC test_power.o CC test_power_cpufreq.o CC test_power_kvm_vm.o CC test_common.o CC test_distributor.o CC test_distributor_perf.o CC test_reorder.o CC virtual_pmd.o CC packet_burst_generator.o CC test_acl.o CC test_link_bonding.o CC test_link_bonding_mode4.o CC test_link_bonding_rssconf.o CC test_pmd_ring.o CC test_pmd_ring_perf.o CC test_cryptodev_blockcipher.o CC test_cryptodev.o CC test_cryptodev_asym.o CC test_cryptodev_security_pdcp.o CC test_metrics.o CC test_eventdev.o CC test_event_ring.o CC test_event_eth_rx_adapter.o CC test_event_eth_tx_adapter.o CC test_event_timer_adapter.o CC test_event_crypto_adapter.o CC test_graph.o CC test_graph_perf.o CC test_rawdev.o CC test_kvargs.o CC test_bpf.o CC test_rcu_qsbr.o CC test_rcu_qsbr_perf.o CC test_security.o CC test_ipsec.o CC test_ipsec_perf.o CC test_ipsec_sad.o MKRES test_resource_c.res.o LD test INSTALL-APP test INSTALL-MAP test.map Build complete [x86_64-native-linuxapp-gcc] Installation cannot run with T defined and DESTDIR undefined 12/05/2020 13:40:18 dut.10.240.183.202: make -j 14 app/test_sub O=x86_64-native-linuxapp-gcc 12/05/2020 13:40:20 dut.10.240.183.202: app/test_sub == Build app/test LD test INSTALL-APP test INSTALL-MAP test.map 12/05/2020 13:40:20 dut.10.240.183.202: mv -f ./x86_64-native-linuxapp-gcc/app/test ./app/test/test_scalar 12/05/2020 13:40:20 dut.10.240.183.202: 12/05/2020 13:40:20 dut.10.240.183.202: sed -i -e 's/CONFIG_RTE_IXGBE_INC_VECTOR=n/CONFIG_RTE_IXGBE_INC_VECTOR=y/' config/common_base 12/05/2020 13:40:20 dut.10.240.183.202: 12/05/2020 13:40:20 dut.10.240.183.202: sed -i 's/CONFIG_RTE_EAL_IGB_UIO=n/CONFIG_RTE_EAL_IGB_UIO=y/g' config/common_base 12/05/2020 13:40:20 dut.10.240.183.202: 12/05/2020 13:40:20 dut.10.240.183.202: rm -rf x86_64-native-linuxapp-gcc 12/05/2020 13:40:21 dut.10.240.183.202: 12/05/2020 13:40:21 dut.10.240.183.202: rm -rf ./app/test/test_resource_c.res.o 12/05/2020 13:40:21 dut.10.240.183.202: 12/05/2020 13:40:21 dut.10.240.183.202: rm -rf ./app/test/test_resource_tar.res.o 12/05/2020 13:40:21 dut.10.240.183.202: 12/05/2020 13:40:21 dut.10.240.183.202: rm -rf ./app/test/test_pci_sysfs.res.o 12/05/2020 13:40:21 dut.10.240.183.202: 12/05/2020 13:40:21 dut.10.240.183.202: make -j 14 install T=x86_64-native-linuxapp-gcc 12/05/2020 13:44:17 dut.10.240.183.202: Configuration done using x86_64-native-linuxapp-gcc == Build lib == Build lib/librte_telemetry == Build lib/librte_kvargs SYMLINK-FILE include/rte_telemetry.h CC telemetry.o CC telemetry_data.o CC telemetry_legacy.o SYMLINK-FILE include/rte_kvargs.h CC rte_kvargs.o AR librte_kvargs.a INSTALL-LIB librte_kvargs.a AR librte_telemetry.a INSTALL-LIB librte_telemetry.a == Build lib/librte_eal == Build lib/librte_eal/include SYMLINK-FILE include/rte_alarm.h SYMLINK-FILE include/rte_bitmap.h SYMLINK-FILE include/rte_branch_prediction.h SYMLINK-FILE include/rte_bus.h SYMLINK-FILE include/rte_class.h SYMLINK-FILE include/rte_common.h SYMLINK-FILE include/rte_compat.h SYMLINK-FILE include/rte_debug.h SYMLINK-FILE include/rte_dev.h SYMLINK-FILE include/rte_devargs.h SYMLINK-FILE include/rte_eal.h SYMLINK-FILE include/rte_eal_interrupts.h SYMLINK-FILE include/rte_eal_memconfig.h SYMLINK-FILE include/rte_eal_trace.h SYMLINK-FILE include/rte_errno.h SYMLINK-FILE include/rte_fbarray.h SYMLINK-FILE include/rte_function_versioning.h SYMLINK-FILE include/rte_hexdump.h SYMLINK-FILE include/rte_hypervisor.h SYMLINK-FILE include/rte_interrupts.h SYMLINK-FILE include/rte_keepalive.h SYMLINK-FILE include/rte_launch.h SYMLINK-FILE include/rte_lcore.h SYMLINK-FILE include/rte_log.h SYMLINK-FILE include/rte_malloc.h SYMLINK-FILE include/rte_memory.h SYMLINK-FILE include/rte_memzone.h SYMLINK-FILE include/rte_pci_dev_feature_defs.h SYMLINK-FILE include/rte_pci_dev_features.h SYMLINK-FILE include/rte_per_lcore.h SYMLINK-FILE include/rte_random.h SYMLINK-FILE include/rte_reciprocal.h SYMLINK-FILE include/rte_service.h SYMLINK-FILE include/rte_service_component.h SYMLINK-FILE include/rte_string_fns.h SYMLINK-FILE include/rte_tailq.h SYMLINK-FILE include/rte_test.h SYMLINK-FILE include/rte_time.h SYMLINK-FILE include/rte_trace.h SYMLINK-FILE include/rte_trace_point.h SYMLINK-FILE include/rte_trace_point_register.h SYMLINK-FILE include/rte_uuid.h SYMLINK-FILE include/rte_version.h SYMLINK-FILE include/rte_vfio.h SYMLINK-FILE include/rte_atomic.h SYMLINK-FILE include/rte_atomic_32.h SYMLINK-FILE include/rte_atomic_64.h SYMLINK-FILE include/rte_byteorder.h SYMLINK-FILE include/rte_byteorder_32.h SYMLINK-FILE include/rte_byteorder_64.h SYMLINK-FILE include/rte_cpuflags.h SYMLINK-FILE include/rte_cycles.h SYMLINK-FILE include/rte_io.h SYMLINK-FILE include/rte_mcslock.h SYMLINK-FILE include/rte_memcpy.h SYMLINK-FILE include/rte_pause.h SYMLINK-FILE include/rte_prefetch.h SYMLINK-FILE include/rte_rtm.h SYMLINK-FILE include/rte_rwlock.h SYMLINK-FILE include/rte_spinlock.h SYMLINK-FILE include/rte_ticketlock.h SYMLINK-FILE include/rte_vect.h SYMLINK-FILE include/generic/rte_atomic.h SYMLINK-FILE include/generic/rte_byteorder.h SYMLINK-FILE include/generic/rte_cpuflags.h SYMLINK-FILE include/generic/rte_cycles.h SYMLINK-FILE include/generic/rte_io.h SYMLINK-FILE include/generic/rte_mcslock.h SYMLINK-FILE include/generic/rte_memcpy.h SYMLINK-FILE include/generic/rte_pause.h SYMLINK-FILE include/generic/rte_prefetch.h SYMLINK-FILE include/generic/rte_rwlock.h SYMLINK-FILE include/generic/rte_spinlock.h SYMLINK-FILE include/generic/rte_ticketlock.h SYMLINK-FILE include/generic/rte_vect.h == Build lib/librte_eal/linux SYMLINK-FILE include/rte_kni_common.h SYMLINK-FILE include/rte_os.h CC eal_cpuflags.o CC eal.o CC eal_hugepage_info.o CC eal_memory.o CC eal_thread.o CC eal_log.o CC eal_vfio.o CC eal_vfio_mp_sync.o CC eal_memalloc.o CC eal_debug.o CC eal_lcore.o CC eal_timer.o CC eal_interrupts.o CC eal_alarm.o CC eal_dev.o CC eal_common_lcore.o CC eal_common_timer.o CC eal_common_memzone.o CC eal_common_log.o CC eal_common_launch.o CC eal_common_mcfg.o CC eal_common_memalloc.o CC eal_common_memory.o CC eal_common_tailqs.o CC eal_common_errno.o CC eal_common_cpuflags.o CC eal_common_hypervisor.o CC eal_common_string_fns.o CC eal_common_hexdump.o CC eal_common_devargs.o CC eal_common_class.o CC eal_common_bus.o CC eal_common_dev.o CC eal_common_options.o CC eal_common_thread.o CC eal_common_proc.o CC eal_common_fbarray.o CC eal_common_uuid.o CC eal_common_trace.o CC eal_common_trace_ctf.o CC eal_common_trace_points.o CC eal_common_trace_utils.o CC rte_malloc.o CC hotplug_mp.o CC malloc_elem.o CC malloc_heap.o CC malloc_mp.o CC rte_keepalive.o CC rte_service.o CC rte_random.o CC rte_reciprocal.o CC rte_cpuflags.o CC rte_hypervisor.o CC rte_spinlock.o CC rte_cycles.o AR librte_eal.a INSTALL-LIB librte_eal.a == Build lib/librte_pci == Build lib/librte_ring == Build lib/librte_timer == Build lib/librte_stack == Build lib/librte_cfgfile == Build lib/librte_acl == Build lib/librte_meter == Build lib/librte_jobstats == Build lib/librte_graph SYMLINK-FILE include/rte_meter.h CC rte_meter.o SYMLINK-FILE include/rte_cfgfile.h SYMLINK-FILE include/rte_pci.h CC rte_cfgfile.o CC rte_pci.o SYMLINK-FILE include/rte_timer.h SYMLINK-FILE include/rte_ring.h SYMLINK-FILE include/rte_ring_core.h SYMLINK-FILE include/rte_stack.h SYMLINK-FILE include/rte_ring_elem.h CC rte_timer.o SYMLINK-FILE include/rte_graph.h SYMLINK-FILE include/rte_ring_generic.h SYMLINK-FILE include/rte_graph_worker.h SYMLINK-FILE include/rte_jobstats.h SYMLINK-FILE include/rte_stack_std.h CC node.o SYMLINK-FILE include/rte_stack_lf.h CC graph.o CC graph_ops.o SYMLINK-FILE include/rte_acl_osdep.h SYMLINK-FILE include/rte_ring_c11_mem.h SYMLINK-FILE include/rte_stack_lf_generic.h CC rte_jobstats.o SYMLINK-FILE include/rte_acl.h SYMLINK-FILE include/rte_stack_lf_c11.h SYMLINK-FILE include/rte_stack_lf_stubs.h SYMLINK-FILE include/rte_ring_hts.h SYMLINK-FILE include/rte_ring_hts_c11_mem.h CC rte_stack.o CC tb_mem.o CC rte_acl.o SYMLINK-FILE include/rte_ring_peek.h CC rte_stack_std.o CC rte_stack_lf.o SYMLINK-FILE include/rte_ring_peek_c11_mem.h SYMLINK-FILE include/rte_ring_rts.h SYMLINK-FILE include/rte_ring_rts_c11_mem.h CC rte_ring.o CC acl_bld.o CC acl_gen.o AR librte_pci.a INSTALL-LIB librte_pci.a CC acl_run_scalar.o AR librte_meter.a AR librte_stack.a INSTALL-LIB librte_meter.a INSTALL-LIB librte_stack.a CC acl_run_sse.o CC acl_run_avx2.o AR librte_ring.a INSTALL-LIB librte_ring.a CC graph_debug.o AR librte_cfgfile.a INSTALL-LIB librte_cfgfile.a == Build lib/librte_mempool == Build lib/librte_hash == Build lib/librte_rcu CC graph_stats.o AR librte_jobstats.a INSTALL-LIB librte_jobstats.a CC graph_populate.o SYMLINK-FILE include/rte_mempool.h SYMLINK-FILE include/rte_mempool_trace.h SYMLINK-FILE include/rte_mempool_trace_fp.h AR librte_timer.a INSTALL-LIB librte_timer.a CC rte_mempool.o CC rte_mempool_ops.o == Build lib/librte_power SYMLINK-FILE include/rte_hash.h SYMLINK-FILE include/rte_hash_crc.h SYMLINK-FILE include/rte_jhash.h SYMLINK-FILE include/rte_thash.h SYMLINK-FILE include/rte_fbk_hash.h CC rte_cuckoo_hash.o SYMLINK-FILE include/rte_rcu_qsbr.h CC rte_rcu_qsbr.o CC rte_fbk_hash.o CC rte_mempool_ops_default.o SYMLINK-FILE include/rte_power.h CC mempool_trace_points.o SYMLINK-FILE include/rte_power_empty_poll.h CC rte_power.o CC power_acpi_cpufreq.o CC power_kvm_vm.o CC guest_channel.o CC rte_power_empty_poll.o CC power_pstate_cpufreq.o AR librte_graph.a INSTALL-LIB librte_graph.a AR librte_rcu.a INSTALL-LIB librte_rcu.a AR librte_mempool.a INSTALL-LIB librte_mempool.a == Build lib/librte_rib == Build lib/librte_mbuf AR librte_power.a INSTALL-LIB librte_power.a SYMLINK-FILE include/rte_mbuf_core.h SYMLINK-FILE include/rte_mbuf.h SYMLINK-FILE include/rte_mbuf_ptype.h SYMLINK-FILE include/rte_mbuf_dyn.h SYMLINK-FILE include/rte_mbuf_pool_ops.h CC rte_mbuf.o CC rte_mbuf_ptype.o CC rte_mbuf_pool_ops.o CC rte_mbuf_dyn.o SYMLINK-FILE include/rte_rib.h SYMLINK-FILE include/rte_rib6.h CC rte_rib.o CC rte_rib6.o AR librte_acl.a INSTALL-LIB librte_acl.a AR librte_hash.a INSTALL-LIB librte_hash.a == Build lib/librte_efd == Build lib/librte_lpm == Build lib/librte_member AR librte_rib.a SYMLINK-FILE include/rte_efd.h SYMLINK-FILE include/rte_member.h CC rte_efd.o CC rte_member.o INSTALL-LIB librte_rib.a CC rte_member_ht.o SYMLINK-FILE include/rte_lpm.h CC rte_member_vbf.o SYMLINK-FILE include/rte_lpm_sse.h SYMLINK-FILE include/rte_lpm6.h CC rte_lpm.o == Build lib/librte_fib CC rte_lpm6.o AR librte_mbuf.a INSTALL-LIB librte_mbuf.a == Build lib/librte_compressdev == Build lib/librte_net == Build lib/librte_bbdev == Build lib/librte_cryptodev == Build lib/librte_reorder SYMLINK-FILE include/rte_fib.h SYMLINK-FILE include/rte_fib6.h CC rte_fib.o CC rte_fib6.o CC dir24_8.o CC trie.o SYMLINK-FILE include/rte_bbdev_op.h SYMLINK-FILE include/rte_ip.h SYMLINK-FILE include/rte_comp.h SYMLINK-FILE include/rte_bbdev.h SYMLINK-FILE include/rte_tcp.h SYMLINK-FILE include/rte_reorder.h SYMLINK-FILE include/rte_compressdev.h SYMLINK-FILE include/rte_bbdev_pmd.h SYMLINK-FILE include/rte_crypto.h SYMLINK-FILE include/rte_udp.h CC rte_reorder.o SYMLINK-FILE include/rte_compressdev_pmd.h SYMLINK-FILE include/rte_esp.h CC rte_bbdev.o SYMLINK-FILE include/rte_crypto_asym.h SYMLINK-FILE include/rte_compressdev_internal.h SYMLINK-FILE include/rte_sctp.h SYMLINK-FILE include/rte_crypto_sym.h CC rte_compressdev.o SYMLINK-FILE include/rte_icmp.h SYMLINK-FILE include/rte_cryptodev.h SYMLINK-FILE include/rte_arp.h SYMLINK-FILE include/rte_cryptodev_pmd.h SYMLINK-FILE include/rte_ether.h SYMLINK-FILE include/rte_cryptodev_trace.h SYMLINK-FILE include/rte_gre.h SYMLINK-FILE include/rte_cryptodev_trace_fp.h SYMLINK-FILE include/rte_net.h CC rte_cryptodev.o SYMLINK-FILE include/rte_net_crc.h SYMLINK-FILE include/rte_mpls.h SYMLINK-FILE include/rte_higig.h SYMLINK-FILE include/rte_gtp.h SYMLINK-FILE include/rte_vxlan.h CC rte_net.o CC rte_cryptodev_pmd.o CC cryptodev_trace_points.o CC rte_net_crc.o CC rte_ether.o CC rte_arp.o AR librte_lpm.a INSTALL-LIB librte_lpm.a CC rte_compressdev_pmd.o AR librte_reorder.a INSTALL-LIB librte_reorder.a CC rte_comp.o AR librte_member.a INSTALL-LIB librte_member.a AR librte_efd.a INSTALL-LIB librte_efd.a AR librte_fib.a INSTALL-LIB librte_fib.a AR librte_bbdev.a INSTALL-LIB librte_bbdev.a AR librte_net.a INSTALL-LIB librte_net.a == Build lib/librte_ethdev == Build lib/librte_cmdline == Build lib/librte_sched AR librte_compressdev.a INSTALL-LIB librte_compressdev.a SYMLINK-FILE include/cmdline.h SYMLINK-FILE include/cmdline_parse.h SYMLINK-FILE include/cmdline_parse_num.h SYMLINK-FILE include/cmdline_parse_ipaddr.h SYMLINK-FILE include/cmdline_parse_etheraddr.h SYMLINK-FILE include/cmdline_parse_string.h SYMLINK-FILE include/cmdline_rdline.h SYMLINK-FILE include/cmdline_vt100.h SYMLINK-FILE include/cmdline_socket.h SYMLINK-FILE include/cmdline_cirbuf.h SYMLINK-FILE include/cmdline_parse_portlist.h CC cmdline.o CC cmdline_cirbuf.o CC cmdline_parse.o CC cmdline_parse_etheraddr.o CC cmdline_parse_ipaddr.o CC cmdline_parse_num.o CC cmdline_parse_string.o CC cmdline_rdline.o SYMLINK-FILE include/rte_ethdev.h SYMLINK-FILE include/rte_ethdev_driver.h CC cmdline_vt100.o CC cmdline_socket.o SYMLINK-FILE include/rte_sched.h SYMLINK-FILE include/rte_sched_common.h SYMLINK-FILE include/rte_ethdev_core.h SYMLINK-FILE include/rte_red.h SYMLINK-FILE include/rte_ethdev_pci.h CC cmdline_parse_portlist.o SYMLINK-FILE include/rte_approx.h SYMLINK-FILE include/rte_ethdev_trace.h CC rte_sched.o SYMLINK-FILE include/rte_ethdev_trace_fp.h SYMLINK-FILE include/rte_ethdev_vdev.h AR librte_cryptodev.a SYMLINK-FILE include/rte_eth_ctrl.h INSTALL-LIB librte_cryptodev.a SYMLINK-FILE include/rte_dev_info.h CC rte_red.o SYMLINK-FILE include/rte_flow.h SYMLINK-FILE include/rte_flow_driver.h SYMLINK-FILE include/rte_tm.h SYMLINK-FILE include/rte_tm_driver.h SYMLINK-FILE include/rte_mtr.h SYMLINK-FILE include/rte_mtr_driver.h CC rte_approx.o CC ethdev_private.o CC rte_ethdev.o CC rte_class_eth.o CC rte_flow.o CC rte_tm.o CC rte_mtr.o CC ethdev_profile.o CC ethdev_trace_points.o AR librte_cmdline.a INSTALL-LIB librte_cmdline.a AR librte_sched.a INSTALL-LIB librte_sched.a AR librte_ethdev.a INSTALL-LIB librte_ethdev.a == Build lib/librte_security == Build lib/librte_rawdev == Build lib/librte_eventdev == Build lib/librte_vhost == Build lib/librte_gro == Build lib/librte_ip_frag == Build lib/librte_metrics == Build lib/librte_kni == Build lib/librte_pdump == Build lib/librte_distributor == Build lib/librte_gso == Build lib/librte_bpf == Build lib/librte_node SYMLINK-FILE include/rte_rawdev.h SYMLINK-FILE include/rte_rawdev_pmd.h SYMLINK-FILE include/rte_metrics.h SYMLINK-FILE include/rte_gro.h SYMLINK-FILE include/rte_eventdev.h SYMLINK-FILE include/rte_kni.h SYMLINK-FILE include/rte_distributor.h SYMLINK-FILE include/rte_security.h SYMLINK-FILE include/bpf_def.h SYMLINK-FILE include/rte_pdump.h SYMLINK-FILE include/rte_node_ip4_api.h SYMLINK-FILE include/rte_gso.h SYMLINK-FILE include/rte_bpf.h CC rte_metrics.o SYMLINK-FILE include/rte_ip_frag.h CC rte_rawdev.o CC rte_gro.o SYMLINK-FILE include/rte_eventdev_pmd.h SYMLINK-FILE include/rte_security_driver.h CC rte_ipv4_fragmentation.o CC rte_distributor_single.o CC rte_kni.o SYMLINK-FILE include/rte_node_eth_api.h CC rte_gso.o CC rte_pdump.o SYMLINK-FILE include/rte_bpf_ethdev.h SYMLINK-FILE include/rte_vhost.h SYMLINK-FILE include/rte_eventdev_pmd_pci.h SYMLINK-FILE include/rte_vdpa.h CC rte_security.o CC null.o CC bpf.o SYMLINK-FILE include/rte_eventdev_pmd_vdev.h CC bpf_exec.o SYMLINK-FILE include/rte_vhost_crypto.h SYMLINK-FILE include/rte_eventdev_trace.h CC fd_man.o SYMLINK-FILE include/rte_eventdev_trace_fp.h SYMLINK-FILE include/rte_event_ring.h SYMLINK-FILE include/rte_event_eth_rx_adapter.h SYMLINK-FILE include/rte_event_timer_adapter.h SYMLINK-FILE include/rte_event_timer_adapter_pmd.h SYMLINK-FILE include/rte_event_crypto_adapter.h SYMLINK-FILE include/rte_event_eth_tx_adapter.h CC rte_eventdev.o CC log.o AR librte_metrics.a INSTALL-LIB librte_metrics.a CC rte_event_ring.o CC iotlb.o CC socket.o CC bpf_load.o CC gso_common.o CC ethdev_rx.o CC gro_tcp4.o AR librte_security.a INSTALL-LIB librte_security.a CC gro_vxlan_tcp4.o CC rte_distributor.o == Build lib/librte_bitratestats AR librte_rawdev.a CC rte_ipv6_fragmentation.o INSTALL-LIB librte_rawdev.a CC rte_ipv4_reassembly.o AR librte_pdump.a SYMLINK-FILE include/rte_bitrate.h INSTALL-LIB librte_pdump.a CC rte_bitrate.o CC bpf_pkt.o == Build lib/librte_latencystats AR librte_kni.a INSTALL-LIB librte_kni.a CC bpf_validate.o CC rte_distributor_match_sse.o CC rte_ipv6_reassembly.o CC rte_ip_frag_common.o SYMLINK-FILE include/rte_latencystats.h CC rte_latencystats.o CC ethdev_tx.o AR librte_gro.a INSTALL-LIB librte_gro.a CC ethdev_ctrl.o CC vhost.o CC eventdev_trace_points.o CC gso_tcp4.o AR librte_bitratestats.a INSTALL-LIB librte_bitratestats.a CC gso_tunnel_tcp4.o CC gso_udp4.o CC rte_event_eth_rx_adapter.o CC rte_event_timer_adapter.o AR librte_distributor.a INSTALL-LIB librte_distributor.a CC rte_event_crypto_adapter.o == Build lib/librte_ipsec CC ip4_lookup.o CC ip_frag_internal.o AR librte_latencystats.a INSTALL-LIB librte_latencystats.a CC ip4_rewrite.o CC vhost_user.o CC virtio_net.o CC rte_event_eth_tx_adapter.o CC bpf_jit_x86.o SYMLINK-FILE include/rte_ipsec.h AR librte_gso.a INSTALL-LIB librte_gso.a SYMLINK-FILE include/rte_ipsec_group.h SYMLINK-FILE include/rte_ipsec_sa.h CC vdpa.o CC vhost_crypto.o SYMLINK-FILE include/rte_ipsec_sad.h CC esp_inb.o AR librte_ip_frag.a INSTALL-LIB librte_ip_frag.a CC esp_outb.o CC sa.o CC ses.o CC ipsec_sad.o AR librte_bpf.a INSTALL-LIB librte_bpf.a CC pkt_drop.o AR librte_node.a INSTALL-LIB librte_node.a AR librte_ipsec.a INSTALL-LIB librte_ipsec.a AR librte_eventdev.a INSTALL-LIB librte_eventdev.a == Build lib/librte_port SYMLINK-FILE include/rte_port.h SYMLINK-FILE include/rte_port_ethdev.h SYMLINK-FILE include/rte_port_ring.h SYMLINK-FILE include/rte_port_ras.h SYMLINK-FILE include/rte_port_sched.h SYMLINK-FILE include/rte_port_frag.h SYMLINK-FILE include/rte_port_fd.h SYMLINK-FILE include/rte_port_source_sink.h SYMLINK-FILE include/rte_port_kni.h SYMLINK-FILE include/rte_port_sym_crypto.h SYMLINK-FILE include/rte_port_eventdev.h CC rte_port_ethdev.o CC rte_port_ring.o CC rte_port_frag.o CC rte_port_ras.o CC rte_port_sched.o CC rte_port_fd.o CC rte_port_kni.o CC rte_port_source_sink.o CC rte_port_sym_crypto.o CC rte_port_eventdev.o AR librte_port.a INSTALL-LIB librte_port.a == Build lib/librte_table AR librte_vhost.a INSTALL-LIB librte_vhost.a SYMLINK-FILE include/rte_table.h SYMLINK-FILE include/rte_table_lpm.h SYMLINK-FILE include/rte_table_lpm_ipv6.h SYMLINK-FILE include/rte_table_acl.h SYMLINK-FILE include/rte_table_hash.h SYMLINK-FILE include/rte_table_hash_cuckoo.h SYMLINK-FILE include/rte_table_hash_func.h SYMLINK-FILE include/rte_table_hash_func_arm64.h SYMLINK-FILE include/rte_lru.h SYMLINK-FILE include/rte_lru_x86.h SYMLINK-FILE include/rte_table_array.h SYMLINK-FILE include/rte_table_stub.h CC rte_table_lpm.o CC rte_table_lpm_ipv6.o CC rte_table_acl.o CC rte_table_hash_cuckoo.o CC rte_table_hash_key8.o CC rte_table_hash_key16.o CC rte_table_hash_key32.o CC rte_table_hash_ext.o CC rte_table_hash_lru.o CC rte_table_array.o CC rte_table_stub.o AR librte_table.a INSTALL-LIB librte_table.a == Build lib/librte_flow_classify == Build lib/librte_pipeline SYMLINK-FILE include/rte_pipeline.h SYMLINK-FILE include/rte_port_in_action.h SYMLINK-FILE include/rte_table_action.h CC rte_pipeline.o CC rte_port_in_action.o CC rte_table_action.o SYMLINK-FILE include/rte_flow_classify.h CC rte_flow_classify.o CC rte_flow_classify_parse.o AR librte_flow_classify.a INSTALL-LIB librte_flow_classify.a AR librte_pipeline.a INSTALL-LIB librte_pipeline.a == Build buildtools == Build kernel == Build buildtools/pmdinfogen == Build kernel/linux HOSTCC pmdinfogen.o == Build kernel/linux/igb_uio HOSTLD dpdk-pmdinfogen INSTALL-HOSTAPP dpdk-pmdinfogen == Build drivers == Build drivers/common == Build drivers/common/cpt == Build drivers/common/octeontx == Build drivers/common/iavf == Build drivers/common/dpaax == Build drivers/common/octeontx2 CC cpt_fpm_tables.o CC cpt_pmd_ops_helper.o CC octeontx_mbox.o CC iavf_adminq.o CC iavf_common.o CC otx2_dev.o CC dpaax_iova_table.o CC dpaa_of.o CC otx2_irq.o CC iavf_impl.o CC otx2_common.o CC otx2_mbox.o CC otx2_sec_idev.o AR librte_common_octeontx.a INSTALL-LIB librte_common_octeontx.a AR librte_common_dpaax.a INSTALL-LIB librte_common_dpaax.a AR librte_common_cpt.a INSTALL-LIB librte_common_cpt.a AR librte_common_octeontx2.a INSTALL-LIB librte_common_octeontx2.a AR librte_common_iavf.a INSTALL-LIB librte_common_iavf.a == Build drivers/bus AR /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/built-in.a CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o == Build drivers/bus/pci == Build drivers/bus/ifpga == Build drivers/bus/vmbus == Build drivers/bus/vdev == Build drivers/bus/dpaa == Build drivers/bus/fslmc SYMLINK-FILE include/rte_bus_vdev.h CC vdev.o CC vdev_params.o CC dpaa_bus.o CC base/fman/fman.o CC base/fman/fman_hw.o SYMLINK-FILE include/rte_bus_ifpga.h CC base/fman/netcfg_layer.o SYMLINK-FILE include/rte_bus_pci.h CC base/qbman/process.o CC ifpga_bus.o CC base/qbman/bman.o CC qbman/qbman_portal.o CC qbman/qbman_debug.o CC linux/pci.o SYMLINK-FILE include/rte_bus_vmbus.h SYMLINK-FILE include/rte_vmbus_reg.h CC linux/vmbus_bus.o CC linux/pci_uio.o CC linux/pci_vfio.o Building modules, stage 2. MODPOST 1 modules CC mc/dpmng.o CC ifpga_common.o CC linux/vmbus_uio.o CC vmbus_common.o AR librte_bus_ifpga.a AR librte_bus_vdev.a INSTALL-LIB librte_bus_ifpga.a INSTALL-LIB librte_bus_vdev.a CC mc/dpbp.o CC mc/dpio.o CC mc/mc_sys.o CC mc/dpcon.o CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o CC mc/dpci.o CC vmbus_channel.o CC mc/dpdmai.o CC base/qbman/bman_driver.o CC portal/dpaa2_hw_dpio.o CC base/qbman/qman.o CC base/qbman/qman_driver.o CC base/qbman/dpaa_alloc.o LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko CC pci_params.o INSTALL-MODULE igb_uio.ko CC base/qbman/dpaa_sys.o CC vmbus_bufring.o CC vmbus_common_uio.o CC portal/dpaa2_hw_dpbp.o CC pci_common.o CC portal/dpaa2_hw_dpci.o CC fslmc_vfio.o CC fslmc_bus.o CC pci_common_uio.o AR librte_bus_vmbus.a INSTALL-LIB librte_bus_vmbus.a PMDINFO portal/dpaa2_hw_dpio.o.pmd.c CC portal/dpaa2_hw_dpio.o.pmd.o LD portal/dpaa2_hw_dpio.o AR librte_bus_pci.a INSTALL-LIB librte_bus_pci.a PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c CC portal/dpaa2_hw_dpbp.o.pmd.o PMDINFO portal/dpaa2_hw_dpci.o.pmd.c CC portal/dpaa2_hw_dpci.o.pmd.o LD portal/dpaa2_hw_dpci.o LD portal/dpaa2_hw_dpbp.o AR librte_bus_fslmc.a INSTALL-LIB librte_bus_fslmc.a AR librte_bus_dpaa.a INSTALL-LIB librte_bus_dpaa.a == Build drivers/mempool == Build drivers/mempool/bucket == Build drivers/mempool/dpaa2 == Build drivers/mempool/dpaa == Build drivers/mempool/ring == Build drivers/mempool/octeontx2 == Build drivers/mempool/stack == Build drivers/mempool/octeontx CC rte_mempool_stack.o SYMLINK-FILE include/rte_dpaa2_mempool.h CC dpaa2_hw_mempool.o CC rte_mempool_bucket.o CC rte_mempool_ring.o CC dpaa_mempool.o CC otx2_mempool_ops.o CC otx2_mempool_irq.o CC otx2_mempool.o CC otx2_mempool_debug.o CC rte_mempool_octeontx.o CC octeontx_fpavf.o PMDINFO octeontx_fpavf.o.pmd.c CC octeontx_fpavf.o.pmd.o LD octeontx_fpavf.o AR librte_mempool_stack.a INSTALL-LIB librte_mempool_stack.a AR librte_mempool_ring.a AR librte_mempool_octeontx.a INSTALL-LIB librte_mempool_ring.a INSTALL-LIB librte_mempool_octeontx.a AR librte_mempool_dpaa2.a INSTALL-LIB librte_mempool_dpaa2.a PMDINFO otx2_mempool.o.pmd.c CC otx2_mempool.o.pmd.o LD otx2_mempool.o AR librte_mempool_dpaa.a INSTALL-LIB librte_mempool_dpaa.a AR librte_mempool_octeontx2.a INSTALL-LIB librte_mempool_octeontx2.a AR librte_mempool_bucket.a INSTALL-LIB librte_mempool_bucket.a == Build drivers/net == Build drivers/baseband == Build drivers/common/qat == Build drivers/crypto == Build drivers/vdpa == Build drivers/compress == Build drivers/baseband/null == Build drivers/baseband/fpga_5gnr_fec == Build drivers/baseband/turbo_sw == Build drivers/baseband/fpga_lte_fec == Build drivers/crypto/scheduler == Build drivers/crypto/octeontx2 == Build drivers/crypto/null == Build drivers/crypto/octeontx == Build drivers/crypto/dpaa2_sec == Build drivers/crypto/dpaa_sec == Build drivers/compress/octeontx == Build drivers/vdpa/ifc == Build drivers/net/af_packet CC qat_comp.o SYMLINK-FILE include/fpga_lte_fec.h CC bbdev_null.o CC fpga_lte_fec.o SYMLINK-FILE include/rte_pmd_fpga_5gnr_fec.h CC bbdev_turbo_software.o SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h CC null_crypto_pmd.o CC otx2_cryptodev.o CC rte_fpga_5gnr_fec.o SYMLINK-FILE include/rte_cryptodev_scheduler.h CC otx_cryptodev.o CC otx_zip_pmd.o CC rte_eth_af_packet.o CC scheduler_pmd.o CC dpaa_sec.o CC ifcvf_vdpa.o CC dpaa2_sec_dpseci.o CC scheduler_pmd_ops.o PMDINFO otx_cryptodev.o.pmd.c CC otx_cryptodev.o.pmd.o LD otx_cryptodev.o PMDINFO otx2_cryptodev.o.pmd.c CC otx2_cryptodev.o.pmd.o CC otx_cryptodev_capabilities.o LD otx2_cryptodev.o CC otx2_cryptodev_capabilities.o CC qat_comp_pmd.o PMDINFO null_crypto_pmd.o.pmd.c CC null_crypto_pmd.o.pmd.o LD null_crypto_pmd.o CC null_crypto_pmd_ops.o PMDINFO ifcvf_vdpa.o.pmd.c CC ifcvf_vdpa.o.pmd.o LD ifcvf_vdpa.o CC rte_cryptodev_scheduler.o CC ifcvf.o CC otx_cryptodev_hw_access.o PMDINFO otx_zip_pmd.o.pmd.c CC otx_zip_pmd.o.pmd.o PMDINFO rte_eth_af_packet.o.pmd.c CC rte_eth_af_packet.o.pmd.o LD otx_zip_pmd.o LD rte_eth_af_packet.o CC otx2_cryptodev_hw_access.o PMDINFO rte_fpga_5gnr_fec.o.pmd.c CC rte_fpga_5gnr_fec.o.pmd.o CC otx_zip.o AR librte_pmd_af_packet.a INSTALL-LIB librte_pmd_af_packet.a LD rte_fpga_5gnr_fec.o == Build drivers/net/ark PMDINFO fpga_lte_fec.o.pmd.c CC fpga_lte_fec.o.pmd.o LD fpga_lte_fec.o AR librte_pmd_bbdev_fpga_5gnr_fec.a INSTALL-LIB librte_pmd_bbdev_fpga_5gnr_fec.a CC otx2_cryptodev_mbox.o AR librte_pmd_bbdev_fpga_lte_fec.a INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a CC otx2_cryptodev_ops.o AR librte_pmd_ifc.a INSTALL-LIB librte_pmd_ifc.a == Build drivers/net/atlantic PMDINFO bbdev_null.o.pmd.c CC bbdev_null.o.pmd.o CC ark_ddm.o LD bbdev_null.o AR librte_pmd_bbdev_null.a CC qat_device.o INSTALL-LIB librte_pmd_bbdev_null.a CC ark_ethdev.o CC atl_rxtx.o AR librte_pmd_null_crypto.a INSTALL-LIB librte_pmd_null_crypto.a CC ark_ethdev_rx.o AR librte_pmd_octeontx_zip.a INSTALL-LIB librte_pmd_octeontx_zip.a CC ark_ethdev_tx.o CC mc/dpseci.o CC otx_cryptodev_mbox.o CC otx_cryptodev_ops.o CC scheduler_roundrobin.o CC ark_mpu.o CC scheduler_pkt_size_distr.o PMDINFO qat_device.o.pmd.c CC qat_device.o.pmd.o LD qat_device.o PMDINFO bbdev_turbo_software.o.pmd.c CC bbdev_turbo_software.o.pmd.o LD bbdev_turbo_software.o CC qat_common.o AR librte_pmd_bbdev_turbo_sw.a INSTALL-LIB librte_pmd_bbdev_turbo_sw.a CC qat_logs.o CC qat_qp.o CC scheduler_failover.o CC ark_pktchkr.o CC scheduler_multicore.o CC atl_ethdev.o PMDINFO ark_ethdev.o.pmd.c CC ark_ethdev.o.pmd.o LD ark_ethdev.o CC atl_hw_regs.o == Build drivers/crypto/caam_jr == Build drivers/crypto/virtio == Build drivers/crypto/nitrox CC caam_jr.o CC caam_jr_capabilities.o CC caam_jr_hw.o AR librte_pmd_qat.a INSTALL-LIB librte_pmd_qat.a CC hw_atl_utils.o CC hw_atl_llh.o CC virtqueue.o CC nitrox_device.o CC ark_pktdir.o CC ark_pktgen.o CC ark_rqp.o PMDINFO atl_ethdev.o.pmd.c CC atl_ethdev.o.pmd.o LD atl_ethdev.o CC hw_atl_utils_fw2x.o CC hw_atl_b0.o CC ark_udm.o PMDINFO nitrox_device.o.pmd.c CC nitrox_device.o.pmd.o LD nitrox_device.o CC virtio_pci.o CC nitrox_hal.o CC nitrox_logs.o CC rte_pmd_atlantic.o CC nitrox_sym.o CC nitrox_sym_capabilities.o CC nitrox_sym_reqmgr.o CC virtio_rxtx.o AR librte_pmd_ark.a INSTALL-LIB librte_pmd_ark.a CC virtio_cryptodev.o == Build drivers/net/avp == Build drivers/net/axgbe == Build drivers/net/bonding AR librte_pmd_atlantic.a SYMLINK-FILE include/rte_avp_common.h INSTALL-LIB librte_pmd_atlantic.a SYMLINK-FILE include/rte_avp_fifo.h CC nitrox_qp.o CC avp_ethdev.o == Build drivers/net/cxgbe CC axgbe_ethdev.o SYMLINK-FILE include/rte_eth_bond.h SYMLINK-FILE include/rte_eth_bond_8023ad.h CC rte_eth_bond_api.o CC axgbe_dev.o CC rte_eth_bond_pmd.o CC cxgbe_ethdev.o AR librte_pmd_nitrox.a INSTALL-LIB librte_pmd_nitrox.a CC rte_eth_bond_args.o PMDINFO virtio_cryptodev.o.pmd.c CC virtio_cryptodev.o.pmd.o LD virtio_cryptodev.o AR librte_pmd_virtio_crypto.a INSTALL-LIB librte_pmd_virtio_crypto.a CC cxgbevf_ethdev.o AR librte_pmd_crypto_scheduler.a INSTALL-LIB librte_pmd_crypto_scheduler.a PMDINFO dpaa2_sec_dpseci.o.pmd.c CC dpaa2_sec_dpseci.o.pmd.o CC cxgbe_main.o LD dpaa2_sec_dpseci.o AR librte_pmd_dpaa2_sec.a INSTALL-LIB librte_pmd_dpaa2_sec.a CC rte_eth_bond_8023ad.o PMDINFO dpaa_sec.o.pmd.c CC dpaa_sec.o.pmd.o PMDINFO axgbe_ethdev.o.pmd.c CC axgbe_ethdev.o.pmd.o LD dpaa_sec.o LD axgbe_ethdev.o AR librte_pmd_dpaa_sec.a INSTALL-LIB librte_pmd_dpaa_sec.a CC rte_eth_bond_alb.o CC rte_eth_bond_flow.o CC cxgbevf_main.o CC sge.o CC axgbe_mdio.o PMDINFO cxgbevf_ethdev.o.pmd.c CC cxgbevf_ethdev.o.pmd.o LD cxgbevf_ethdev.o CC axgbe_phy_impl.o PMDINFO cxgbe_ethdev.o.pmd.c CC cxgbe_ethdev.o.pmd.o LD cxgbe_ethdev.o CC axgbe_i2c.o CC axgbe_rxtx.o CC caam_jr_uio.o PMDINFO avp_ethdev.o.pmd.c CC avp_ethdev.o.pmd.o LD avp_ethdev.o CC cxgbe_filter.o AR librte_pmd_avp.a INSTALL-LIB librte_pmd_avp.a CC cxgbe_flow.o PMDINFO caam_jr.o.pmd.c CC caam_jr.o.pmd.o LD caam_jr.o CC t4_hw.o CC clip_tbl.o CC axgbe_rxtx_vec_sse.o CC mps_tcam.o CC l2t.o AR librte_pmd_caam_jr.a INSTALL-LIB librte_pmd_caam_jr.a CC smt.o == Build drivers/net/dpaa == Build drivers/net/dpaa2 AR librte_pmd_axgbe.a INSTALL-LIB librte_pmd_axgbe.a CC t4vf_hw.o SYMLINK-FILE include/rte_pmd_dpaa.h CC dpaa_ethdev.o CC dpaa_rxtx.o == Build drivers/net/e1000 == Build drivers/net/ena SYMLINK-FILE include/rte_pmd_dpaa2.h CC base/dpaa2_hw_dpni.o CC dpaa2_rxtx.o CC dpaa2_ethdev.o CC dpaa2_flow.o PMDINFO rte_eth_bond_pmd.o.pmd.c CC rte_eth_bond_pmd.o.pmd.o CC ena_ethdev.o CC ena_com.o LD rte_eth_bond_pmd.o CC e1000_80003es2lan.o AR librte_pmd_bond.a INSTALL-LIB librte_pmd_bond.a CC e1000_82540.o == Build drivers/net/enetc PMDINFO dpaa_ethdev.o.pmd.c CC dpaa_ethdev.o.pmd.o CC e1000_82541.o == Build drivers/net/enic LD dpaa_ethdev.o == Build drivers/net/failsafe CC enetc_ethdev.o CC enetc_rxtx.o CC enic_ethdev.o CC e1000_82542.o CC failsafe.o CC e1000_82543.o CC failsafe_args.o PMDINFO dpaa2_ethdev.o.pmd.c CC dpaa2_ethdev.o.pmd.o AR librte_pmd_octeontx2_crypto.a LD dpaa2_ethdev.o INSTALL-LIB librte_pmd_octeontx2_crypto.a == Build drivers/net/fm10k == Build drivers/net/hinic CC failsafe_eal.o AR librte_pmd_cxgbe.a INSTALL-LIB librte_pmd_cxgbe.a == Build drivers/net/hns3 CC failsafe_ops.o CC e1000_82571.o PMDINFO enetc_ethdev.o.pmd.c CC enetc_ethdev.o.pmd.o LD enetc_ethdev.o CC fm10k_ethdev.o CC hinic_pmd_api_cmd.o AR librte_pmd_enetc.a INSTALL-LIB librte_pmd_enetc.a CC failsafe_rxtx.o PMDINFO failsafe.o.pmd.c CC failsafe.o.pmd.o LD failsafe.o CC hns3_ethdev.o CC hns3_ethdev_vf.o CC e1000_82575.o CC hns3_cmd.o PMDINFO enic_ethdev.o.pmd.c CC enic_ethdev.o.pmd.o LD enic_ethdev.o CC enic_main.o PMDINFO ena_ethdev.o.pmd.c CC ena_ethdev.o.pmd.o LD ena_ethdev.o CC hns3_mbx.o CC ena_eth_com.o AR librte_pmd_dpaa.a CC dpaa2_mux.o INSTALL-LIB librte_pmd_dpaa.a CC hns3_rxtx.o CC hinic_pmd_cfg.o AR librte_pmd_ena.a INSTALL-LIB librte_pmd_ena.a CC hinic_pmd_cmdq.o CC hinic_pmd_eqs.o CC hinic_pmd_hwdev.o CC e1000_i210.o PMDINFO hns3_ethdev_vf.o.pmd.c CC hns3_ethdev_vf.o.pmd.o LD hns3_ethdev_vf.o CC e1000_api.o CC hinic_pmd_hwif.o PMDINFO dpaa2_mux.o.pmd.c CC dpaa2_mux.o.pmd.o LD dpaa2_mux.o CC dpaa2_sparser.o CC mc/dpni.o CC mc/dpkg.o CC e1000_ich8lan.o CC hinic_pmd_mgmt.o CC hinic_pmd_niccfg.o CC e1000_logs.o CC mc/dpdmux.o CC failsafe_ether.o CC e1000_mac.o CC e1000_manage.o PMDINFO fm10k_ethdev.o.pmd.c CC fm10k_ethdev.o.pmd.o LD fm10k_ethdev.o CC failsafe_flow.o CC enic_rxtx.o CC fm10k_rxtx.o CC fm10k_pf.o AR librte_pmd_dpaa2.a INSTALL-LIB librte_pmd_dpaa2.a CC fm10k_tlv.o CC fm10k_common.o AR librte_pmd_octeontx_crypto.a INSTALL-LIB librte_pmd_octeontx_crypto.a CC e1000_mbx.o CC fm10k_mbx.o PMDINFO hns3_ethdev.o.pmd.c CC hns3_ethdev.o.pmd.o LD hns3_ethdev.o CC hinic_pmd_nicio.o CC hinic_pmd_wq.o CC hinic_pmd_mbox.o CC hns3_rss.o CC hns3_flow.o CC e1000_nvm.o CC hns3_fdir.o CC hns3_intr.o CC failsafe_intr.o CC hns3_stats.o CC hns3_regs.o CC e1000_osdep.o CC fm10k_vf.o CC fm10k_api.o CC e1000_phy.o CC e1000_vf.o CC igb_ethdev.o CC igb_rxtx.o CC hinic_pmd_flow.o CC hinic_pmd_ethdev.o CC enic_clsf.o CC fm10k_rxtx_vec.o CC hinic_pmd_rx.o CC igb_pf.o AR librte_pmd_failsafe.a INSTALL-LIB librte_pmd_failsafe.a CC hns3_dcb.o == Build drivers/net/i40e == Build drivers/net/iavf == Build drivers/net/ice CC igb_flow.o CC iavf_ethdev.o SYMLINK-FILE include/rte_pmd_i40e.h CC i40e_adminq.o SYMLINK-FILE include/rte_pmd_ice.h CC ice_controlq.o CC ice_common.o CC enic_res.o CC ice_sched.o CC ice_switch.o CC ice_nvm.o CC enic_flow.o PMDINFO hinic_pmd_ethdev.o.pmd.c CC hinic_pmd_ethdev.o.pmd.o CC hns3_mp.o LD hinic_pmd_ethdev.o CC hinic_pmd_tx.o AR librte_pmd_fm10k.a INSTALL-LIB librte_pmd_fm10k.a CC enic_fm_flow.o CC i40e_common.o CC i40e_diag.o PMDINFO iavf_ethdev.o.pmd.c CC iavf_ethdev.o.pmd.o LD iavf_ethdev.o CC iavf_vchnl.o CC iavf_rxtx.o CC iavf_generic_flow.o AR librte_pmd_hns3.a INSTALL-LIB librte_pmd_hns3.a CC iavf_fdir.o CC iavf_hash.o CC em_ethdev.o PMDINFO igb_ethdev.o.pmd.c CC igb_ethdev.o.pmd.o CC em_rxtx.o LD igb_ethdev.o CC i40e_hmc.o CC i40e_lan_hmc.o CC i40e_nvm.o CC base/vnic_cq.o CC base/vnic_wq.o CC base/vnic_dev.o AR librte_pmd_hinic.a INSTALL-LIB librte_pmd_hinic.a CC base/vnic_intr.o CC base/vnic_rq.o CC enic_rxtx_vec_avx2.o CC iavf_rxtx_vec_sse.o CC iavf_rxtx_vec_avx2.o PMDINFO em_ethdev.o.pmd.c CC em_ethdev.o.pmd.o LD em_ethdev.o CC ice_flex_pipe.o CC ice_flow.o CC ice_dcb.o CC ice_fdir.o CC ice_acl.o CC ice_acl_ctrl.o CC i40e_dcb.o AR librte_pmd_e1000.a INSTALL-LIB librte_pmd_e1000.a CC i40e_ethdev.o CC i40e_rxtx.o CC ice_ethdev.o AR librte_pmd_enic.a INSTALL-LIB librte_pmd_enic.a CC ice_rxtx.o CC i40e_rxtx_vec_sse.o CC i40e_ethdev_vf.o CC i40e_pf.o CC i40e_fdir.o == Build drivers/net/igc == Build drivers/net/ionic == Build drivers/net/ixgbe CC igc_api.o CC ionic_mac_api.o AR librte_pmd_iavf.a INSTALL-LIB librte_pmd_iavf.a CC ionic_rx_filter.o == Build drivers/net/liquidio SYMLINK-FILE include/rte_pmd_ixgbe.h CC ixgbe_common.o CC lio_ethdev.o CC lio_rxtx.o CC lio_23xx_vf.o CC igc_base.o CC igc_i225.o CC i40e_flow.o CC ionic_rxtx.o PMDINFO i40e_ethdev_vf.o.pmd.c CC i40e_ethdev_vf.o.pmd.o LD i40e_ethdev_vf.o CC igc_mac.o CC rte_pmd_i40e.o CC i40e_tm.o CC i40e_vf_representor.o CC igc_manage.o PMDINFO ice_ethdev.o.pmd.c CC ice_ethdev.o.pmd.o CC i40e_rxtx_vec_avx2.o LD ice_ethdev.o CC lio_mbox.o PMDINFO lio_ethdev.o.pmd.c CC lio_ethdev.o.pmd.o LD lio_ethdev.o CC ionic_dev.o CC ice_rxtx_vec_sse.o CC ixgbe_82598.o CC igc_nvm.o CC igc_osdep.o CC ice_switch_filter.o CC ice_fdir_filter.o CC ixgbe_82599.o CC ixgbe_x540.o CC igc_phy.o CC igc_logs.o CC ixgbe_x550.o AR librte_pmd_lio.a INSTALL-LIB librte_pmd_lio.a CC ixgbe_phy.o CC ixgbe_api.o CC ixgbe_vf.o CC ionic_ethdev.o CC ixgbe_hv_vf.o CC ionic_lif.o CC ionic_main.o == Build drivers/net/memif == Build drivers/net/netvsc CC ixgbe_dcb.o CC igc_ethdev.o CC rte_eth_memif.o CC hn_ethdev.o CC hn_rxtx.o CC hn_rndis.o CC ice_hash.o PMDINFO ionic_ethdev.o.pmd.c CC ionic_ethdev.o.pmd.o LD ionic_ethdev.o CC hn_nvs.o CC ice_rxtx_vec_avx2.o CC hn_vf.o CC ice_generic_flow.o CC ixgbe_dcb_82599.o CC ice_dcf.o AR librte_pmd_ionic.a INSTALL-LIB librte_pmd_ionic.a CC ixgbe_dcb_82598.o PMDINFO hn_ethdev.o.pmd.c CC hn_ethdev.o.pmd.o LD hn_ethdev.o CC ixgbe_mbx.o == Build drivers/net/nfp == Build drivers/net/bnxt CC ixgbe_rxtx.o CC ixgbe_ethdev.o PMDINFO igc_ethdev.o.pmd.c CC igc_ethdev.o.pmd.o CC igc_txrx.o LD igc_ethdev.o CC igc_filter.o CC ixgbe_fdir.o CC nfp_cppcore.o SYMLINK-FILE include/rte_pmd_bnxt.h CC bnxt_cpr.o CC nfp_cpp_pcie_ops.o CC nfp_mutex.o CC nfp_resource.o CC bnxt_ethdev.o AR librte_pmd_netvsc.a INSTALL-LIB librte_pmd_netvsc.a CC bnxt_filter.o CC bnxt_flow.o PMDINFO rte_eth_memif.o.pmd.c PMDINFO i40e_ethdev.o.pmd.c CC rte_eth_memif.o.pmd.o CC i40e_ethdev.o.pmd.o LD rte_eth_memif.o LD i40e_ethdev.o CC memif_socket.o AR librte_pmd_i40e.a INSTALL-LIB librte_pmd_i40e.a CC bnxt_hwrm.o CC bnxt_ring.o CC ice_dcf_ethdev.o == Build drivers/net/null == Build drivers/net/octeontx CC ixgbe_pf.o CC rte_eth_null.o CC nfp_crc.o CC octeontx_rxtx.o CC nfp_mip.o CC octeontx_pkovf.o PMDINFO octeontx_pkovf.o.pmd.c CC octeontx_pkovf.o.pmd.o LD octeontx_pkovf.o CC bnxt_rxq.o AR librte_pmd_memif.a INSTALL-LIB librte_pmd_memif.a CC bnxt_rxr.o PMDINFO ice_dcf_ethdev.o.pmd.c CC ice_dcf_ethdev.o.pmd.o LD ice_dcf_ethdev.o CC ice_dcf_parent.o CC octeontx_pkivf.o PMDINFO octeontx_pkivf.o.pmd.c CC octeontx_pkivf.o.pmd.o LD octeontx_pkivf.o CC nfp_nffw.o CC nfp_hwinfo.o CC igc_flow.o CC nfp_rtsym.o CC nfp_nsp.o PMDINFO rte_eth_null.o.pmd.c CC rte_eth_null.o.pmd.o AR librte_pmd_ice.a LD rte_eth_null.o INSTALL-LIB librte_pmd_ice.a CC bnxt_stats.o AR librte_pmd_null.a INSTALL-LIB librte_pmd_null.a CC bnxt_txq.o CC bnxt_txr.o CC bnxt_vnic.o CC bnxt_irq.o CC octeontx_bgx.o CC octeontx_ethdev.o CC bnxt_util.o CC octeontx_ethdev_ops.o AR librte_pmd_igc.a INSTALL-LIB librte_pmd_igc.a CC ixgbe_flow.o CC nfp_nsp_cmds.o PMDINFO bnxt_ethdev.o.pmd.c CC bnxt_ethdev.o.pmd.o LD bnxt_ethdev.o CC nfp_nsp_eth.o CC nfp_net.o CC ixgbe_rxtx_vec_sse.o CC ixgbe_ipsec.o CC rte_pmd_ixgbe.o CC ixgbe_tm.o CC ixgbe_vf_representor.o PMDINFO octeontx_ethdev.o.pmd.c CC octeontx_ethdev.o.pmd.o LD octeontx_ethdev.o AR librte_pmd_octeontx.a INSTALL-LIB librte_pmd_octeontx.a CC rte_pmd_bnxt.o PMDINFO ixgbe_ethdev.o.pmd.c CC ixgbe_ethdev.o.pmd.o LD ixgbe_ethdev.o CC bnxt_rxtx_vec_sse.o CC tf_core/tf_core.o CC tf_core/bitalloc.o == Build drivers/net/octeontx2 == Build drivers/net/qede == Build drivers/net/ring CC otx2_rx.o CC otx2_tx.o SYMLINK-FILE include/rte_eth_ring.h CC rte_eth_ring.o CC otx2_tm.o CC ecore_dev.o CC ecore_hw.o CC ecore_cxt.o CC ecore_l2.o CC tf_core/tf_msg.o CC otx2_rss.o CC ecore_sp_commands.o AR librte_pmd_ixgbe.a INSTALL-LIB librte_pmd_ixgbe.a CC ecore_init_fw_funcs.o CC ecore_spq.o CC tf_core/rand.o CC tf_core/stack.o CC otx2_mac.o CC tf_core/tf_em.o PMDINFO nfp_net.o.pmd.c CC nfp_net.o.pmd.o LD nfp_net.o CC tf_core/tf_rm.o AR librte_pmd_nfp.a INSTALL-LIB librte_pmd_nfp.a CC tf_core/tf_tbl.o CC tf_core/tfp.o PMDINFO rte_eth_ring.o.pmd.c CC rte_eth_ring.o.pmd.o CC tf_ulp/bnxt_ulp.o LD rte_eth_ring.o AR librte_pmd_ring.a INSTALL-LIB librte_pmd_ring.a CC tf_ulp/ulp_mark_mgr.o CC tf_ulp/ulp_flow_db.o CC tf_ulp/ulp_template_db.o CC otx2_ptp.o CC tf_ulp/ulp_utils.o CC ecore_init_ops.o CC ecore_mcp.o CC ecore_int.o CC tf_ulp/ulp_mapper.o CC ecore_dcbx.o CC bcm_osal.o CC ecore_sriov.o CC otx2_flow.o CC tf_ulp/ulp_matcher.o CC tf_ulp/ulp_rte_parser.o CC ecore_vf.o CC tf_ulp/bnxt_ulp_flow.o CC qede_ethdev.o CC qede_main.o CC qede_rxtx.o CC tf_ulp/ulp_port_db.o CC qede_filter.o == Build drivers/net/sfc == Build drivers/net/tap == Build drivers/net/thunderx == Build drivers/net/vdev_netvsc CC sfc_ethdev.o CC nicvf_rxtx.o CC sfc_kvargs.o AR librte_pmd_bnxt.a INSTALL-LIB librte_pmd_bnxt.a CC sfc.o CC vdev_netvsc.o CC rte_eth_tap.o CC sfc_mcdi.o CC tap_flow.o == Build drivers/net/virtio == Build drivers/net/vmxnet3 PMDINFO qede_ethdev.o.pmd.c CC qede_ethdev.o.pmd.o LD qede_ethdev.o CC sfc_intr.o CC otx2_link.o CC virtqueue.o CC vmxnet3_rxtx.o PMDINFO vdev_netvsc.o.pmd.c CC vdev_netvsc.o.pmd.o CC vmxnet3_ethdev.o LD vdev_netvsc.o AR librte_pmd_vdev_netvsc.a INSTALL-LIB librte_pmd_vdev_netvsc.a CC sfc_ev.o PMDINFO sfc_ethdev.o.pmd.c CC sfc_ethdev.o.pmd.o LD sfc_ethdev.o CC sfc_port.o == Build drivers/net/kni CC nicvf_hw.o CC rte_eth_kni.o CC nicvf_mbox.o CC nicvf_ethdev.o CC tap_netlink.o CC otx2_vlan.o CC virtio_pci.o AR librte_pmd_qede.a INSTALL-LIB librte_pmd_qede.a CC virtio_rxtx.o CC virtio_ethdev.o CC virtio_rxtx_simple.o CC sfc_rx.o CC virtio_rxtx_simple_sse.o PMDINFO vmxnet3_ethdev.o.pmd.c CC vmxnet3_ethdev.o.pmd.o LD vmxnet3_ethdev.o CC virtio_user/vhost_user.o PMDINFO rte_eth_kni.o.pmd.c CC rte_eth_kni.o.pmd.o LD rte_eth_kni.o AR librte_pmd_kni.a INSTALL-LIB librte_pmd_kni.a CC nicvf_bsvf.o == Build drivers/net/softnic == Build drivers/net/vhost PMDINFO rte_eth_tap.o.pmd.c CC rte_eth_tap.o.pmd.o LD rte_eth_tap.o PMDINFO nicvf_ethdev.o.pmd.c CC nicvf_ethdev.o.pmd.o LD nicvf_ethdev.o CC virtio_user/vhost_kernel.o CC tap_tcmsgs.o CC nicvf_svf.o CC tap_bpf_api.o CC sfc_tx.o AR librte_pmd_vmxnet3_uio.a AR librte_pmd_thunderx_nicvf.a INSTALL-LIB librte_pmd_vmxnet3_uio.a INSTALL-LIB librte_pmd_thunderx_nicvf.a CC sfc_tso.o CC sfc_filter.o SYMLINK-FILE include/rte_eth_vhost.h SYMLINK-FILE include/rte_eth_softnic.h CC rte_eth_vhost.o CC rte_eth_softnic.o CC rte_eth_softnic_mempool.o CC otx2_stats.o CC otx2_mcast.o CC otx2_lookup.o CC tap_intr.o CC otx2_ethdev.o CC otx2_flow_ctrl.o CC otx2_flow_parse.o PMDINFO rte_eth_softnic.o.pmd.c CC rte_eth_softnic.o.pmd.o LD rte_eth_softnic.o CC rte_eth_softnic_swq.o CC sfc_flow.o PMDINFO virtio_ethdev.o.pmd.c CC virtio_ethdev.o.pmd.o LD virtio_ethdev.o CC sfc_dp.o AR librte_pmd_tap.a INSTALL-LIB librte_pmd_tap.a CC virtio_user/vhost_kernel_tap.o CC rte_eth_softnic_link.o CC rte_eth_softnic_tm.o CC rte_eth_softnic_tap.o CC sfc_ef10_rx.o CC sfc_ef10_essb_rx.o CC sfc_ef10_tx.o PMDINFO rte_eth_vhost.o.pmd.c CC rte_eth_vhost.o.pmd.o LD rte_eth_vhost.o AR librte_pmd_vhost.a INSTALL-LIB librte_pmd_vhost.a CC efx_bootcfg.o CC efx_crc32.o CC efx_ev.o CC efx_evb.o CC efx_filter.o CC rte_eth_softnic_action.o CC rte_eth_softnic_pipeline.o CC virtio_user/virtio_user_dev.o PMDINFO otx2_ethdev.o.pmd.c CC otx2_ethdev.o.pmd.o LD otx2_ethdev.o CC virtio_user_ethdev.o CC efx_hash.o CC rte_eth_softnic_thread.o CC rte_eth_softnic_cli.o CC rte_eth_softnic_flow.o CC rte_eth_softnic_meter.o CC efx_intr.o CC rte_eth_softnic_cryptodev.o CC efx_lic.o PMDINFO virtio_user_ethdev.o.pmd.c CC virtio_user_ethdev.o.pmd.o LD virtio_user_ethdev.o CC efx_mac.o CC efx_mcdi.o CC efx_mon.o CC efx_nic.o CC otx2_flow_utils.o AR librte_pmd_virtio.a INSTALL-LIB librte_pmd_virtio.a CC otx2_ethdev_irq.o CC parser.o CC conn.o CC efx_nvram.o CC efx_phy.o CC efx_port.o CC efx_proxy.o CC otx2_ethdev_ops.o CC otx2_ethdev_sec.o CC otx2_ethdev_debug.o CC otx2_ethdev_devargs.o CC efx_rx.o CC efx_sram.o CC efx_tunnel.o CC efx_tx.o CC efx_vpd.o CC mcdi_mon.o CC siena_mac.o CC siena_mcdi.o CC siena_nic.o CC siena_nvram.o CC siena_phy.o CC siena_sram.o CC siena_vpd.o CC ef10_ev.o CC ef10_evb.o CC ef10_filter.o CC ef10_intr.o CC ef10_image.o CC ef10_mac.o CC ef10_mcdi.o AR librte_pmd_octeontx2.a CC ef10_nic.o INSTALL-LIB librte_pmd_octeontx2.a CC ef10_nvram.o CC ef10_phy.o CC ef10_proxy.o CC ef10_rx.o CC ef10_tx.o CC ef10_vpd.o AR librte_pmd_softnic.a INSTALL-LIB librte_pmd_softnic.a CC hunt_nic.o CC medford_nic.o CC medford2_nic.o AR librte_pmd_sfc_efx.a INSTALL-LIB librte_pmd_sfc_efx.a == Build drivers/event == Build drivers/event/sw == Build drivers/event/dsw == Build drivers/event/skeleton == Build drivers/event/octeontx == Build drivers/event/dpaa == Build drivers/event/octeontx2 == Build drivers/event/dpaa2 == Build drivers/event/opdl CC dpaa2_hw_dpcon.o CC dpaa2_eventdev.o CC dpaa2_eventdev_selftest.o CC dsw_evdev.o CC dsw_event.o CC dsw_xstats.o CC dpaa_eventdev.o CC skeleton_eventdev.o CC opdl_ring.o CC opdl_evdev.o CC otx2_worker_dual.o CC opdl_evdev_init.o CC sw_evdev.o CC ssovf_worker.o PMDINFO skeleton_eventdev.o.pmd.c CC skeleton_eventdev.o.pmd.o LD skeleton_eventdev.o AR librte_pmd_skeleton_event.a INSTALL-LIB librte_pmd_skeleton_event.a CC sw_evdev_worker.o CC sw_evdev_scheduler.o PMDINFO opdl_evdev.o.pmd.c CC opdl_evdev.o.pmd.o LD opdl_evdev.o CC sw_evdev_xstats.o PMDINFO dpaa2_hw_dpcon.o.pmd.c CC dpaa2_hw_dpcon.o.pmd.o LD dpaa2_hw_dpcon.o PMDINFO sw_evdev.o.pmd.c CC sw_evdev.o.pmd.o CC sw_evdev_selftest.o CC opdl_evdev_xstats.o PMDINFO dsw_evdev.o.pmd.c CC dsw_evdev.o.pmd.o LD sw_evdev.o LD dsw_evdev.o CC opdl_test.o CC ssovf_evdev.o PMDINFO dpaa2_eventdev.o.pmd.c CC dpaa2_eventdev.o.pmd.o LD dpaa2_eventdev.o CC ssovf_evdev_selftest.o AR librte_pmd_dpaa2_event.a INSTALL-LIB librte_pmd_dpaa2_event.a CC ssovf_probe.o CC timvf_worker.o CC timvf_evdev.o PMDINFO dpaa_eventdev.o.pmd.c CC dpaa_eventdev.o.pmd.o LD dpaa_eventdev.o AR librte_pmd_dpaa_event.a INSTALL-LIB librte_pmd_dpaa_event.a CC timvf_probe.o CC otx2_worker.o PMDINFO ssovf_probe.o.pmd.c CC ssovf_probe.o.pmd.o PMDINFO ssovf_evdev.o.pmd.c CC ssovf_evdev.o.pmd.o LD ssovf_probe.o LD ssovf_evdev.o CC otx2_tim_worker.o CC otx2_evdev.o CC otx2_evdev_adptr.o PMDINFO timvf_probe.o.pmd.c CC timvf_probe.o.pmd.o LD timvf_probe.o CC otx2_tim_evdev.o CC otx2_evdev_selftest.o CC otx2_evdev_irq.o AR librte_pmd_octeontx_ssovf.a INSTALL-LIB librte_pmd_octeontx_ssovf.a AR librte_pmd_dsw_event.a INSTALL-LIB librte_pmd_dsw_event.a AR librte_pmd_opdl_event.a INSTALL-LIB librte_pmd_opdl_event.a AR librte_pmd_sw_event.a INSTALL-LIB librte_pmd_sw_event.a PMDINFO otx2_evdev.o.pmd.c CC otx2_evdev.o.pmd.o LD otx2_evdev.o AR librte_pmd_octeontx2_event.a INSTALL-LIB librte_pmd_octeontx2_event.a == Build drivers/raw == Build drivers/raw/dpaa2_cmdif == Build drivers/raw/skeleton == Build drivers/raw/dpaa2_qdma == Build drivers/raw/ioat == Build drivers/raw/ntb == Build drivers/raw/octeontx2_dma == Build drivers/raw/octeontx2_ep SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h CC dpaa2_cmdif.o SYMLINK-FILE include/rte_pmd_ntb.h CC dpaa2_qdma.o CC ntb.o CC ntb_hw_intel.o CC otx2_dpi_rawdev.o CC otx2_dpi_msg.o CC otx2_dpi_test.o CC otx2_ep_rawdev.o CC otx2_ep_enqdeq.o CC otx2_ep_test.o CC otx2_ep_vf.o CC skeleton_rawdev.o CC skeleton_rawdev_test.o SYMLINK-FILE include/rte_ioat_rawdev.h SYMLINK-FILE include/rte_ioat_spec.h CC ioat_rawdev.o PMDINFO dpaa2_cmdif.o.pmd.c CC dpaa2_cmdif.o.pmd.o CC ioat_rawdev_test.o LD dpaa2_cmdif.o AR librte_rawdev_dpaa2_cmdif.a INSTALL-LIB librte_rawdev_dpaa2_cmdif.a PMDINFO otx2_ep_rawdev.o.pmd.c CC otx2_ep_rawdev.o.pmd.o PMDINFO ioat_rawdev.o.pmd.c CC ioat_rawdev.o.pmd.o LD otx2_ep_rawdev.o LD ioat_rawdev.o PMDINFO skeleton_rawdev.o.pmd.c CC skeleton_rawdev.o.pmd.o LD skeleton_rawdev.o AR librte_rawdev_skeleton.a INSTALL-LIB librte_rawdev_skeleton.a PMDINFO otx2_dpi_rawdev.o.pmd.c CC otx2_dpi_rawdev.o.pmd.o AR librte_rawdev_octeontx2_ep.a LD otx2_dpi_rawdev.o INSTALL-LIB librte_rawdev_octeontx2_ep.a AR librte_rawdev_octeontx2_dma.a INSTALL-LIB librte_rawdev_octeontx2_dma.a AR librte_rawdev_ioat.a INSTALL-LIB librte_rawdev_ioat.a PMDINFO dpaa2_qdma.o.pmd.c CC dpaa2_qdma.o.pmd.o LD dpaa2_qdma.o AR librte_rawdev_dpaa2_qdma.a INSTALL-LIB librte_rawdev_dpaa2_qdma.a PMDINFO ntb.o.pmd.c CC ntb.o.pmd.o LD ntb.o AR librte_rawdev_ntb.a INSTALL-LIB librte_rawdev_ntb.a == Build app == Build app/test-pmd == Build app/test == Build app/pdump == Build app/proc-info == Build app/test-fib == Build app/test-sad == Build app/test-acl == Build app/test-cmdline == Build app/test-pipeline == Build app/test-bbdev == Build app/test-compress-perf == Build app/test-eventdev == Build app/test-crypto-perf CC main.o CC main.o CC main.o CC main.o CC main.o CC main.o CC main.o CC config.o CC cmdline_test.o CC main.o CC main.o CC testpmd.o CC evt_main.o CC commands.o LD cmdline_test CC commands.o CC test_bbdev.o LD testsad LD testacl CC test_bbdev_perf.o CC init.o LD dpdk-procinfo CC test.o CC evt_options.o CC comp_perf_options_parse.o CC cperf_ops.o LD dpdk-pdump CC resource.o CC test_resource.o CC test_prefetch.o CC test_byteorder.o INSTALL-APP cmdline_test CC runtime.o INSTALL-MAP cmdline_test.map CC pipeline_stub.o CC test_per_lcore.o CC test_atomic.o CC evt_test.o INSTALL-APP testsad INSTALL-MAP testsad.map CC parser.o LD testfib CC test_order_common.o CC test_barrier.o CC cperf_options_parsing.o CC comp_perf_test_verify.o INSTALL-APP dpdk-procinfo INSTALL-APP testacl INSTALL-MAP dpdk-procinfo.map INSTALL-MAP testacl.map CC pipeline_hash.o CC comp_perf_test_throughput.o CC comp_perf_test_cyclecount.o CC comp_perf_test_common.o CC pipeline_lpm.o INSTALL-APP dpdk-pdump INSTALL-MAP dpdk-pdump.map CC pipeline_lpm_ipv6.o CC test_malloc.o CC test_order_queue.o CC test_cycles.o CC test_order_atq.o CC test_perf_common.o INSTALL-APP testfib INSTALL-MAP testfib.map CC pipeline_acl.o CC test_mcslock.o CC test_spinlock.o CC cperf_test_vectors.o CC cperf_test_throughput.o CC test_ticketlock.o CC cperf_test_latency.o CC cperf_test_pmd_cyclecount.o CC test_memory.o CC cperf_test_verify.o CC test_memzone.o CC test_bitmap.o CC test_reciprocal_division.o LD testpipeline LD dpdk-test-compress-perf CC test_reciprocal_division_perf.o CC cperf_test_vector_parsing.o CC cperf_test_common.o CC test_perf_queue.o CC parameters.o CC test_perf_atq.o CC test_fbarray.o CC test_pipeline_common.o CC test_external_mem.o CC test_rand_perf.o CC test_ring.o CC test_ring_mpmc_stress.o CC cmdline.o CC cmdline_flow.o LD dpdk-test-crypto-perf CC cmdline_mtr.o CC test_bbdev_vector.o INSTALL-APP dpdk-test-compress-perf INSTALL-MAP dpdk-test-compress-perf.map CC test_ring_hts_stress.o INSTALL-APP testpipeline INSTALL-MAP testpipeline.map CC test_ring_perf.o CC test_ring_peek_stress.o CC test_ring_rts_stress.o CC test_pipeline_queue.o CC test_ring_stress.o CC test_pmd_perf.o CC test_pipeline_atq.o CC cmdline_tm.o INSTALL-APP dpdk-test-crypto-perf INSTALL-MAP dpdk-test-crypto-perf.map CC config.o CC iofwd.o CC macfwd.o CC macswap.o CC flowgen.o CC rxonly.o LD dpdk-test-eventdev CC txonly.o CC csumonly.o CC test_table.o CC test_table_pipeline.o CC test_table_tables.o CC test_table_ports.o CC test_table_combined.o CC icmpecho.o CC noisy_vnf.o INSTALL-APP dpdk-test-eventdev INSTALL-MAP dpdk-test-eventdev.map CC bpf_cmd.o CC test_table_acl.o CC util.o CC softnicfwd.o CC test_flow_classify.o CC test_rwlock.o CC test_stack.o LD testbbdev CC test_stack_perf.o CC test_timer.o CC test_timer_perf.o CC test_timer_racecond.o CC test_timer_secondary.o CC test_mempool.o CC test_mempool_perf.o CC test_mbuf.o CC test_logs.o CC test_memcpy.o CC test_memcpy_perf.o CC test_member.o CC test_member_perf.o CC test_efd.o INSTALL-APP testbbdev INSTALL-MAP testbbdev.map CC test_efd_perf.o CC test_hash.o CC test_thash.o CC test_hash_perf.o CC test_hash_functions.o CC test_hash_multiwriter.o CC test_hash_readwrite.o LD testpmd CC test_hash_readwrite_lf_perf.o CC test_rib.o CC test_rib6.o CC test_fib.o CC test_fib6.o CC test_fib_perf.o CC test_fib6_perf.o CC test_lpm.o CC test_lpm_perf.o CC test_lpm6.o CC test_lpm6_perf.o CC test_debug.o CC test_errno.o CC test_tailq.o INSTALL-APP testpmd INSTALL-MAP testpmd.map CC test_string_fns.o CC test_cpuflags.o CC test_mp_secondary.o CC test_eal_flags.o CC test_eal_fs.o CC test_alarm.o CC test_interrupts.o CC test_version.o CC test_func_reentrancy.o CC test_trace.o CC test_trace_register.o CC test_trace_perf.o CC test_service_cores.o CC sample_packet_forward.o CC test_bitratestats.o CC test_latencystats.o CC test_pdump.o CC test_cmdline.o CC test_cmdline_num.o CC test_cmdline_etheraddr.o CC test_cmdline_portlist.o CC test_cmdline_ipaddr.o CC test_cmdline_cirbuf.o CC test_cmdline_string.o CC test_cmdline_lib.o CC test_crc.o CC test_red.o CC test_sched.o CC test_meter.o CC test_kni.o CC test_power.o CC test_power_cpufreq.o CC test_power_kvm_vm.o CC test_common.o CC test_distributor.o CC test_distributor_perf.o CC test_reorder.o CC virtual_pmd.o CC packet_burst_generator.o CC test_acl.o CC test_link_bonding.o CC test_link_bonding_mode4.o CC test_link_bonding_rssconf.o CC test_pmd_ring.o CC test_pmd_ring_perf.o CC test_cryptodev_blockcipher.o CC test_cryptodev.o CC test_cryptodev_asym.o CC test_cryptodev_security_pdcp.o CC test_metrics.o CC test_eventdev.o CC test_event_ring.o CC test_event_eth_rx_adapter.o CC test_event_eth_tx_adapter.o CC test_event_timer_adapter.o CC test_event_crypto_adapter.o CC test_graph.o CC test_graph_perf.o CC test_rawdev.o CC test_kvargs.o CC test_bpf.o CC test_rcu_qsbr.o CC test_rcu_qsbr_perf.o CC test_security.o CC test_ipsec.o CC test_ipsec_perf.o CC test_ipsec_sad.o MKRES test_resource_c.res.o LD test INSTALL-APP test INSTALL-MAP test.map Build complete [x86_64-native-linuxapp-gcc] Installation cannot run with T defined and DESTDIR undefined 12/05/2020 13:44:17 dut.10.240.183.202: make -j 14 app/test_sub O=x86_64-native-linuxapp-gcc 12/05/2020 13:44:19 dut.10.240.183.202: app/test_sub == Build app/test LD test INSTALL-APP test INSTALL-MAP test.map 12/05/2020 13:44:19 dut.10.240.183.202: mv -f ./x86_64-native-linuxapp-gcc/app/test ./app/test/test 12/05/2020 13:44:19 dut.10.240.183.202: 12/05/2020 13:44:19 TestUnitTestsPmdPerf: Test Case test_pmd_burst Begin 12/05/2020 13:44:19 dut.10.240.183.202: 12/05/2020 13:44:20 tester: 12/05/2020 13:44:20 dut.10.240.183.202: ./app/test/test -l 1,2,3,4 -n 4 -w 0000:03:00.0 -w 0000:03:00.1 --file-prefix=dpdk_27008_20200512133142 12/05/2020 13:44:22 dut.10.240.183.202: EAL: Detected 16 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_27008_20200512133142/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.0 (socket 0) EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.1 (socket 0) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 13:44:22 dut.10.240.183.202: set_rxtx_sc poll_before_xmit 12/05/2020 13:44:22 dut.10.240.183.202: set_rxtx_sc poll_before_xmit stream control switch to poll_before_xmit 12/05/2020 13:44:22 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:44:35 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 CONFIG RXD=2048 TXD=2048 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 start to receive total expect 4096 1037 packets lost, IDLE 10000 times Result: 483 cycles per packet Test OK 12/05/2020 13:44:35 TestUnitTestsPmdPerf: Mode poll_before_xmit latency is 483 12/05/2020 13:44:35 dut.10.240.183.202: set_rxtx_sc poll_after_xmit 12/05/2020 13:44:35 dut.10.240.183.202: set_rxtx_sc poll_after_xmit stream control switch to poll_after_xmit 12/05/2020 13:44:35 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:44:48 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=2048 TXD=2048 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 start to receive total expect 4096 0 packets lost, IDLE 0 times Result: 36 cycles per packet Test OK 12/05/2020 13:44:48 TestUnitTestsPmdPerf: Mode poll_after_xmit latency is 36 12/05/2020 13:44:48 dut.10.240.183.202: quit 12/05/2020 13:44:48 dut.10.240.183.202: quit 12/05/2020 13:44:48 TestUnitTestsPmdPerf: Test Case test_pmd_burst Result PASSED: 12/05/2020 13:44:48 dut.10.240.183.202: kill_all: called by dut and prefix list has value. 12/05/2020 13:44:48 TestUnitTestsPmdPerf: Test Case test_pmd_continues Begin 12/05/2020 13:44:48 dut.10.240.183.202: 12/05/2020 13:44:48 tester: 12/05/2020 13:44:48 dut.10.240.183.202: ./app/test/test -l 1,2,3,4 -n 4 -w 0000:03:00.0 -w 0000:03:00.1 --file-prefix=dpdk_27008_20200512133142 12/05/2020 13:44:51 dut.10.240.183.202: EAL: Detected 16 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_27008_20200512133142/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.0 (socket 0) EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.1 (socket 0) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_sc continuous 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_sc continuous stream control switch to continuous 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_mode vector 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_mode vector mode switch to vector 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_anchor rxtx 12/05/2020 13:44:51 dut.10.240.183.202: set_rxtx_anchor rxtx type switch to rxtx 12/05/2020 13:44:51 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:00 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 108 (expected 2048) mbuf left in port 0 free 652 (expected 2048) mbuf left in port 1 5952380 packet, 1310 drop, 86368951 idle Result: 397 cycles per packet Test OK 12/05/2020 13:45:00 dut.10.240.183.202: set_rxtx_anchor rxonly 12/05/2020 13:45:00 dut.10.240.183.202: set_rxtx_anchor rxonly type switch to rxonly 12/05/2020 13:45:00 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:10 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 104 (expected 2048) mbuf left in port 0 free 652 (expected 2048) mbuf left in port 1 5952380 packet, 1330 drop, 60256014 idle Result: 80 cycles per packet Test OK 12/05/2020 13:45:10 dut.10.240.183.202: set_rxtx_anchor txonly 12/05/2020 13:45:10 dut.10.240.183.202: set_rxtx_anchor txonly type switch to txonly 12/05/2020 13:45:10 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:19 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received do tx measure free 100 (expected 2048) mbuf left in port 0 free 636 (expected 2048) mbuf left in port 1 5952380 packet, 1242 drop, 87254597 idle Result: 28 cycles per packet Test OK 12/05/2020 13:45:19 dut.10.240.183.202: quit 12/05/2020 13:45:19 dut.10.240.183.202: quit 12/05/2020 13:45:19 dut.10.240.183.202: ./app/test/test_scalar -l 1,2,3,4 -n 4 -w 0000:03:00.0 -w 0000:03:00.1 --file-prefix=dpdk_27008_20200512133142 12/05/2020 13:45:22 dut.10.240.183.202: EAL: Detected 16 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_27008_20200512133142/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.0 (socket 0) EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.1 (socket 0) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_sc continuous 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_sc continuous stream control switch to continuous 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_mode scalar 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_mode scalar mode switch to scalar 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_anchor rxtx 12/05/2020 13:45:22 dut.10.240.183.202: set_rxtx_anchor rxtx type switch to rxtx 12/05/2020 13:45:22 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:31 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 104 (expected 2048) mbuf left in port 0 free 224 (expected 2048) mbuf left in port 1 5952380 packet, 946 drop, 197947425 idle Result: 707 cycles per packet Test OK 12/05/2020 13:45:31 dut.10.240.183.202: set_rxtx_anchor rxonly 12/05/2020 13:45:31 dut.10.240.183.202: set_rxtx_anchor rxonly type switch to rxonly 12/05/2020 13:45:31 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:41 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port 0 Link Down Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 312 (expected 2048) mbuf left in port 0 free 708 (expected 2048) mbuf left in port 1 5952380 packet, 813 drop, 31801981 idle Result: 80 cycles per packet Test OK 12/05/2020 13:45:41 dut.10.240.183.202: set_rxtx_anchor txonly 12/05/2020 13:45:41 dut.10.240.183.202: set_rxtx_anchor txonly type switch to txonly 12/05/2020 13:45:41 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:45:50 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received do tx measure free 100 (expected 2048) mbuf left in port 0 free 260 (expected 2048) mbuf left in port 1 5952380 packet, 1194 drop, 192502257 idle Result: 30 cycles per packet Test OK 12/05/2020 13:45:50 dut.10.240.183.202: quit 12/05/2020 13:45:51 dut.10.240.183.202: quit 12/05/2020 13:45:51 dut.10.240.183.202: ./app/test/test -l 1,2,3,4 -n 4 -w 0000:03:00.0 -w 0000:03:00.1 --file-prefix=dpdk_27008_20200512133142 12/05/2020 13:45:53 dut.10.240.183.202: EAL: Detected 16 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_27008_20200512133142/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.0 (socket 0) EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.1 (socket 0) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_sc continuous 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_sc continuous stream control switch to continuous 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_mode full 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_mode full mode switch to full 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_anchor rxtx 12/05/2020 13:45:53 dut.10.240.183.202: set_rxtx_anchor rxtx type switch to rxtx 12/05/2020 13:45:53 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:02 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port 0 Link Down Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 512 (expected 2048) mbuf left in port 0 free 392 (expected 2048) mbuf left in port 1 5952380 packet, 937 drop, 51564084 idle Result: 396 cycles per packet Test OK 12/05/2020 13:46:02 dut.10.240.183.202: set_rxtx_anchor rxonly 12/05/2020 13:46:02 dut.10.240.183.202: set_rxtx_anchor rxonly type switch to rxonly 12/05/2020 13:46:02 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:12 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port 0 Link Down Port 1 Link Down IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 516 (expected 2048) mbuf left in port 0 free 1104 (expected 2048) mbuf left in port 1 5952380 packet, 837 drop, 21920690 idle Result: 90 cycles per packet Test OK 12/05/2020 13:46:12 dut.10.240.183.202: set_rxtx_anchor txonly 12/05/2020 13:46:12 dut.10.240.183.202: set_rxtx_anchor txonly type switch to txonly 12/05/2020 13:46:12 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:21 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received do tx measure free 172 (expected 2048) mbuf left in port 0 free 368 (expected 2048) mbuf left in port 1 5952380 packet, 1174 drop, 121406166 idle Result: 31 cycles per packet Test OK 12/05/2020 13:46:21 dut.10.240.183.202: quit 12/05/2020 13:46:21 dut.10.240.183.202: quit 12/05/2020 13:46:21 dut.10.240.183.202: ./app/test/test -l 1,2,3,4 -n 4 -w 0000:03:00.0 -w 0000:03:00.1 --file-prefix=dpdk_27008_20200512133142 12/05/2020 13:46:24 dut.10.240.183.202: EAL: Detected 16 lcore(s) EAL: Detected 1 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_27008_20200512133142/mp_socket EAL: Selected IOVA mode 'PA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: Probing VFIO support... EAL: VFIO support initialized EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.0 (socket 0) EAL: Probe PCI driver: net_ixgbe (8086:15ad) device: 0000:03:00.1 (socket 0) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_sc continuous 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_sc continuous stream control switch to continuous 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_mode hybrid 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_mode hybrid mode switch to hybrid 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_anchor rxtx 12/05/2020 13:46:24 dut.10.240.183.202: set_rxtx_anchor rxtx type switch to rxtx 12/05/2020 13:46:24 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:33 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 104 (expected 2048) mbuf left in port 0 free 228 (expected 2048) mbuf left in port 1 5952380 packet, 950 drop, 198387872 idle Result: 706 cycles per packet Test OK 12/05/2020 13:46:33 dut.10.240.183.202: set_rxtx_anchor rxonly 12/05/2020 13:46:33 dut.10.240.183.202: set_rxtx_anchor rxonly type switch to rxonly 12/05/2020 13:46:33 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:42 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received free 96 (expected 2048) mbuf left in port 0 free 224 (expected 2048) mbuf left in port 1 5952380 packet, 1258 drop, 134237789 idle Result: 79 cycles per packet Test OK 12/05/2020 13:46:42 dut.10.240.183.202: set_rxtx_anchor txonly 12/05/2020 13:46:42 dut.10.240.183.202: set_rxtx_anchor txonly type switch to txonly 12/05/2020 13:46:42 dut.10.240.183.202: pmd_perf_autotest 12/05/2020 13:46:52 dut.10.240.183.202: pmd_perf_autotest Start PMD RXTX cycles cost test. CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 2 socket 0 Port 0 Address:0C:C4:7A:C8:7E:1E Port 1 Address:0C:C4:7A:C8:7E:1F Checking link statuses... Port0 Link Up. Speed 1000 Mbps - full-duplex Port1 Link Up. Speed 1000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 4096 packets @socket 0 inject 2048 packet to port 0 inject 2048 packet to port 1 Total packets inject to prime ports = 4096 Each port will do 1488095 packets per second Test will stop after at least 5952380 packets received do tx measure free 104 (expected 2048) mbuf left in port 0 free 228 (expected 2048) mbuf left in port 1 5952380 packet, 1162 drop, 197469773 idle Result: 30 cycles per packet Test OK 12/05/2020 13:46:52 dut.10.240.183.202: quit 12/05/2020 13:46:52 dut.10.240.183.202: quit 12/05/2020 13:46:52 TestUnitTestsPmdPerf: +--------+------+--------+--------+ | Mode | rxtx | rxonly | txonly | +========+======+========+========+ | vector | 397 | 80 | 28 | +--------+------+--------+--------+ | scalar | 707 | 80 | 30 | +--------+------+--------+--------+ | full | 396 | 90 | 31 | +--------+------+--------+--------+ | hybrid | 706 | 79 | 30 | +--------+------+--------+--------+ 12/05/2020 13:46:52 TestUnitTestsPmdPerf: Test Case test_pmd_continues Result PASSED: 12/05/2020 13:46:52 dut.10.240.183.202: kill_all: called by dut and prefix list has value. 12/05/2020 13:46:52 dts: TEST SUITE ENDED: TestUnitTestsPmdPerf ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test 2020-05-12 5:58 [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao Qimai 2020-05-12 5:58 ` [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update Xiao Qimai @ 2020-05-12 6:11 ` Xiao, QimaiX 2020-06-02 5:47 ` Tu, Lijuan 2 siblings, 0 replies; 5+ messages in thread From: Xiao, QimaiX @ 2020-05-12 6:11 UTC (permalink / raw) To: dts [-- Attachment #1.1: Type: text/plain, Size: 5313 bytes --] Tested-by:Xiao Qimai <qimaix.xiao@intel.com> ________________________________ From: Xiao, QimaiX <qimaix.xiao@intel.com> Sent: Tuesday, May 12, 2020 1:58 PM To: dts@dpdk.org <dts@dpdk.org> Cc: Xiao, QimaiX <qimaix.xiao@intel.com> Subject: [dts][PATCH V1]unit_tests_loopback: update compile cmd of app/test *. update compile cmd of app/test according to dpdk's update Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com> --- tests/TestSuite_unit_tests_loopback.py | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/tests/TestSuite_unit_tests_loopback.py b/tests/TestSuite_unit_tests_loopback.py index 68b1f30..c1d37b2 100644 --- a/tests/TestSuite_unit_tests_loopback.py +++ b/tests/TestSuite_unit_tests_loopback.py @@ -70,6 +70,8 @@ class TestUnitTestsLoopback(TestCase): self.verify(self.arch in ["x86_64", "arm64"], "pmd perf request running in x86_64 or arm64") self.max_traffic_burst = self.get_max_traffic_burst() self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST %s/#define MAX_TRAFFIC_BURST 32/' app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30) + self.tmp_path = '/tmp/test_pmd_perf.c' + self.dut.send_expect("cp app/test/test_pmd_perf.c %s" % self.tmp_path, "# ") def set_up(self): """ @@ -90,14 +92,14 @@ class TestUnitTestsLoopback(TestCase): Run pmd stream control mode burst test case. """ self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' app/test/test_pmd_perf.c", "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") - self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") + self.tester.send_expect("tcpdump -i %s ether[12:2] != '0x88cc' -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") eal_params = self.dut.create_eal_parameters(cores=self.cores) - self.dut.send_expect("./app/test/test %s" % (eal_params), "R.*T.*E.*>.*>", 60) + self.dut.send_expect("./%s/app/test %s" % (self.target, eal_params), "R.*T.*E.*>.*>", 60) out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120) print(out) self.dut.send_expect("quit", "# ") @@ -113,14 +115,14 @@ class TestUnitTestsLoopback(TestCase): """ self.dut.send_expect("sed -i -e 's/lpbk_mode = 1/lpbk_mode = 0/' app/test/test_pmd_perf.c", "# ", 30) self.dut.send_expect("sed -i -e '/check_all_ports_link_status(nb_ports, RTE_PORT_ALL);/a\ sleep(6);' app/test/test_pmd_perf.c", "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") eal_params = self.dut.create_eal_parameters(cores=self.cores) - self.dut.send_expect("./app/test/test %s" % (eal_params), "R.*T.*E.*>.*>", 60) + self.dut.send_expect("./%s/app/test %s" % (self.target, eal_params), "R.*T.*E.*>.*>", 60) self.dut.send_command("pmd_perf_autotest", 30) # There is no packet loopback, so the test is hung. # It needs to kill the process manually. @@ -133,16 +135,16 @@ class TestUnitTestsLoopback(TestCase): """ Run after each test case. """ + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % self.tmp_path, "# ") self.dut.kill_all() def tear_down_all(self): """ Run after each test suite. """ - self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' app/test/test_pmd_perf.c", "# ", 30) - self.dut.send_expect("sed -i -e '/sleep(6)/d' app/test/test_pmd_perf.c", "# ", 30) + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % self.tmp_path, "# ") self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST 32/#define MAX_TRAFFIC_BURST %s/' app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30) - out = self.dut.build_dpdk_apps('app/test') - self.verify("Error" not in out, "Compilation error") + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % (self.dut.number_of_cores, self.target), "#") + self.verify("Error" not in out, "compilation l3fwd-power error") self.verify("No such" not in out, "Compilation error") self.dut.kill_all() -- 1.8.3.1 [-- Attachment #1.2: Type: text/html, Size: 10321 bytes --] [-- Attachment #2: TestUnitTestsLoopback.log --] [-- Type: application/octet-stream, Size: 37138 bytes --] 12/05/2020 11:40:05 dts: TEST SUITE : TestUnitTestsLoopback 12/05/2020 11:40:05 dts: NIC : fortville_spirit 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 tester: 12/05/2020 11:40:06 dut.10.240.183.61: cat app/test/test_pmd_perf.c 12/05/2020 11:40:06 dut.10.240.183.61: /* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2010-2014 Intel Corporation */ #include <stdio.h> #include <inttypes.h> #include <signal.h> #include <unistd.h> #include <rte_cycles.h> #include <rte_ethdev.h> #include <rte_byteorder.h> #include <rte_atomic.h> #include <rte_malloc.h> #include "packet_burst_generator.h" #include "test.h" #define NB_ETHPORTS_USED (1) #define NB_SOCKETS (2) #define MEMPOOL_CACHE_SIZE 250 #define MAX_PKT_BURST (32) #define RTE_TEST_RX_DESC_DEFAULT (1024) #define RTE_TEST_TX_DESC_DEFAULT (1024) #define RTE_PORT_ALL (~(uint16_t)0x0) /* how long test would take at full line rate */ #define RTE_TEST_DURATION (2) /* * RX and TX Prefetch, Host, and Write-back threshold values should be * carefully set for optimal performance. Consult the network * controller's datasheet and supporting DPDK documentation for guidance * on how these parameters should be set. */ #define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */ #define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */ #define RX_WTHRESH 0 /**< Default values of RX write-back threshold reg. */ /* * These default values are optimized for use with the Intel(R) 82599 10 GbE * Controller and the DPDK ixgbe PMD. Consider using other values for other * network controllers and/or network drivers. */ #define TX_PTHRESH 32 /**< Default values of TX prefetch threshold reg. */ #define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */ #define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */ #define MAX_TRAFFIC_BURST 2048 #define NB_MBUF RTE_MAX( \ (unsigned)(nb_ports*nb_rx_queue*nb_rxd + \ nb_ports*nb_lcores*MAX_PKT_BURST + \ nb_ports*nb_tx_queue*nb_txd + \ nb_lcores*MEMPOOL_CACHE_SIZE + \ nb_ports*MAX_TRAFFIC_BURST), \ (unsigned)8192) static struct rte_mempool *mbufpool[NB_SOCKETS]; /* ethernet addresses of ports */ static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS]; static struct rte_eth_conf port_conf = { .rxmode = { .mq_mode = ETH_MQ_RX_NONE, .max_rx_pkt_len = RTE_ETHER_MAX_LEN, .split_hdr_size = 0, }, .txmode = { .mq_mode = ETH_MQ_TX_NONE, }, .lpbk_mode = 1, /* enable loopback */ }; static struct rte_eth_rxconf rx_conf = { .rx_thresh = { .pthresh = RX_PTHRESH, .hthresh = RX_HTHRESH, .wthresh = RX_WTHRESH, }, .rx_free_thresh = 32, }; static struct rte_eth_txconf tx_conf = { .tx_thresh = { .pthresh = TX_PTHRESH, .hthresh = TX_HTHRESH, .wthresh = TX_WTHRESH, }, .tx_free_thresh = 32, /* Use PMD default values */ .tx_rs_thresh = 32, /* Use PMD default values */ }; enum { LCORE_INVALID = 0, LCORE_AVAIL, LCORE_USED, }; struct lcore_conf { uint8_t status; uint8_t socketid; uint16_t nb_ports; uint16_t portlist[RTE_MAX_ETHPORTS]; } __rte_cache_aligned; struct lcore_conf lcore_conf[RTE_MAX_LCORE]; static uint64_t link_mbps; enum { SC_CONTINUOUS = 0, SC_BURST_POLL_FIRST, SC_BURST_XMIT_FIRST, }; static uint32_t sc_flag; /* Check the link status of all ports in up to 3s, and print them finally */ static void check_all_ports_link_status(uint16_t port_num, uint32_t port_mask) { #define CHECK_INTERVAL 100 /* 100ms */ #define MAX_CHECK_TIME 30 /* 3s (30 * 100ms) in total */ uint16_t portid; uint8_t count, all_ports_up, print_flag = 0; struct rte_eth_link link; int ret; printf("Checking link statuses...\n"); fflush(stdout); for (count = 0; count <= MAX_CHECK_TIME; count++) { all_ports_up = 1; for (portid = 0; portid < port_num; portid++) { if ((port_mask & (1 << portid)) == 0) continue; memset(&link, 0, sizeof(link)); ret = rte_eth_link_get_nowait(portid, &link); if (ret < 0) { all_ports_up = 0; if (print_flag == 1) printf("Port %u link get failed: %s\n", portid, rte_strerror(-ret)); continue; } /* print link status if flag set */ if (print_flag == 1) { if (link.link_status) { printf( "Port%d Link Up. Speed %u Mbps - %s\n", portid, link.link_speed, (link.link_duplex == ETH_LINK_FULL_DUPLEX) ? ("full-duplex") : ("half-duplex")); if (link_mbps == 0) link_mbps = link.link_speed; } else printf("Port %d Link Down\n", portid); continue; } /* clear all_ports_up flag if any link down */ if (link.link_status == ETH_LINK_DOWN) { all_ports_up = 0; break; } } /* after finally printing all link status, get out */ if (print_flag == 1) break; if (all_ports_up == 0) { fflush(stdout); rte_delay_ms(CHECK_INTERVAL); } /* set the print_flag if all ports up or timeout */ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) print_flag = 1; } } static void print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr) { char buf[RTE_ETHER_ADDR_FMT_SIZE]; rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr); printf("%s%s", name, buf); } static int init_traffic(struct rte_mempool *mp, struct rte_mbuf **pkts_burst, uint32_t burst_size) { struct rte_ether_hdr pkt_eth_hdr; struct rte_ipv4_hdr pkt_ipv4_hdr; struct rte_udp_hdr pkt_udp_hdr; uint32_t pktlen; static uint8_t src_mac[] = { 0x00, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF }; static uint8_t dst_mac[] = { 0x00, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA }; initialize_eth_header(&pkt_eth_hdr, (struct rte_ether_addr *)src_mac, (struct rte_ether_addr *)dst_mac, RTE_ETHER_TYPE_IPV4, 0, 0); pktlen = initialize_ipv4_header(&pkt_ipv4_hdr, IPV4_ADDR(10, 0, 0, 1), IPV4_ADDR(10, 0, 0, 2), 26); printf("IPv4 pktlen %u\n", pktlen); pktlen = initialize_udp_header(&pkt_udp_hdr, 0, 0, 18); printf("UDP pktlen %u\n", pktlen); return generate_packet_burst(mp, pkts_burst, &pkt_eth_hdr, 0, &pkt_ipv4_hdr, 1, &pkt_udp_hdr, burst_size, PACKET_BURST_GEN_PKT_LEN, 1); } static int init_lcores(void) { unsigned lcore_id; for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { lcore_conf[lcore_id].socketid = rte_lcore_to_socket_id(lcore_id); if (rte_lcore_is_enabled(lcore_id) == 0) { lcore_conf[lcore_id].status = LCORE_INVALID; continue; } else lcore_conf[lcore_id].status = LCORE_AVAIL; } return 0; } static int init_mbufpool(unsigned nb_mbuf) { int socketid; unsigned lcore_id; char s[64]; for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; socketid = rte_lcore_to_socket_id(lcore_id); if (socketid >= NB_SOCKETS) { rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is out of range %d\n", socketid, lcore_id, NB_SOCKETS); } if (mbufpool[socketid] == NULL) { snprintf(s, sizeof(s), "mbuf_pool_%d", socketid); mbufpool[socketid] = rte_pktmbuf_pool_create(s, nb_mbuf, MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, socketid); if (mbufpool[socketid] == NULL) rte_exit(EXIT_FAILURE, "Cannot init mbuf pool on socket %d\n", socketid); else printf("Allocated mbuf pool on socket %d\n", socketid); } } return 0; } static uint16_t alloc_lcore(uint16_t socketid) { unsigned lcore_id; for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (LCORE_AVAIL != lcore_conf[lcore_id].status || lcore_conf[lcore_id].socketid != socketid || lcore_id == rte_get_master_lcore()) continue; lcore_conf[lcore_id].status = LCORE_USED; lcore_conf[lcore_id].nb_ports = 0; return lcore_id; } return (uint16_t)-1; } static volatile uint64_t stop; static uint64_t count; static uint64_t drop; static uint64_t idle; static void reset_count(void) { count = 0; drop = 0; idle = 0; } static void stats_display(uint16_t port_id) { struct rte_eth_stats stats; rte_eth_stats_get(port_id, &stats); printf(" RX-packets: %-10"PRIu64" RX-missed: %-10"PRIu64" RX-bytes: " "%-"PRIu64"\n", stats.ipackets, stats.imissed, stats.ibytes); printf(" RX-errors: %-10"PRIu64" RX-nombuf: %-10"PRIu64"\n", stats.ierrors, stats.rx_nombuf); printf(" TX-packets: %-10"PRIu64" TX-errors: %-10"PRIu64" TX-bytes: " "%-"PRIu64"\n", stats.opackets, stats.oerrors, stats.obytes); } static void signal_handler(int signum) { /* USR1 signal, stop testing */ if (signum == SIGUSR1) { printf("Force Stop!\n"); stop = 1; } /* USR2 signal, print stats */ if (signum == SIGUSR2) stats_display(0); } struct rte_mbuf **tx_burst; uint64_t (*do_measure)(struct lcore_conf *conf, struct rte_mbuf *pkts_burst[], uint64_t total_pkts); static uint64_t measure_rxtx(struct lcore_conf *conf, struct rte_mbuf *pkts_burst[], uint64_t total_pkts) { unsigned i, portid, nb_rx, nb_tx; uint64_t prev_tsc, cur_tsc; prev_tsc = rte_rdtsc(); while (likely(!stop)) { for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst, MAX_PKT_BURST); if (unlikely(nb_rx == 0)) { idle++; continue; } count += nb_rx; nb_tx = rte_eth_tx_burst(portid, 0, pkts_burst, nb_rx); if (unlikely(nb_tx < nb_rx)) { drop += (nb_rx - nb_tx); do { rte_pktmbuf_free(pkts_burst[nb_tx]); } while (++nb_tx < nb_rx); } } if (unlikely(count >= total_pkts)) break; } cur_tsc = rte_rdtsc(); return cur_tsc - prev_tsc; } static uint64_t measure_rxonly(struct lcore_conf *conf, struct rte_mbuf *pkts_burst[], uint64_t total_pkts) { unsigned i, portid, nb_rx, nb_tx; uint64_t diff_tsc, cur_tsc; diff_tsc = 0; while (likely(!stop)) { for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; cur_tsc = rte_rdtsc(); nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst, MAX_PKT_BURST); if (unlikely(nb_rx == 0)) { idle++; continue; } diff_tsc += rte_rdtsc() - cur_tsc; count += nb_rx; nb_tx = rte_eth_tx_burst(portid, 0, pkts_burst, nb_rx); if (unlikely(nb_tx < nb_rx)) { drop += (nb_rx - nb_tx); do { rte_pktmbuf_free(pkts_burst[nb_tx]); } while (++nb_tx < nb_rx); } } if (unlikely(count >= total_pkts)) break; } return diff_tsc; } static uint64_t measure_txonly(struct lcore_conf *conf, struct rte_mbuf *pkts_burst[], uint64_t total_pkts) { unsigned i, portid, nb_rx, nb_tx; uint64_t diff_tsc, cur_tsc; printf("do tx measure\n"); diff_tsc = 0; while (likely(!stop)) { for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst, MAX_PKT_BURST); if (unlikely(nb_rx == 0)) { idle++; continue; } count += nb_rx; cur_tsc = rte_rdtsc(); nb_tx = rte_eth_tx_burst(portid, 0, pkts_burst, nb_rx); if (unlikely(nb_tx < nb_rx)) { drop += (nb_rx - nb_tx); do { rte_pktmbuf_free(pkts_burst[nb_tx]); } while (++nb_tx < nb_rx); } diff_tsc += rte_rdtsc() - cur_tsc; } if (unlikely(count >= total_pkts)) break; } return diff_tsc; } /* main processing loop */ static int main_loop(__rte_unused void *args) { #define PACKET_SIZE 64 #define FRAME_GAP 12 #define MAC_PREAMBLE 8 struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; unsigned lcore_id; unsigned i, portid, nb_rx = 0, nb_tx = 0; struct lcore_conf *conf; int pkt_per_port; uint64_t diff_tsc; uint64_t packets_per_second, total_packets; lcore_id = rte_lcore_id(); conf = &lcore_conf[lcore_id]; if (conf->status != LCORE_USED) return 0; pkt_per_port = MAX_TRAFFIC_BURST; int idx = 0; for (i = 0; i < conf->nb_ports; i++) { int num = pkt_per_port; portid = conf->portlist[i]; printf("inject %d packet to port %d\n", num, portid); while (num) { nb_tx = RTE_MIN(MAX_PKT_BURST, num); nb_tx = rte_eth_tx_burst(portid, 0, &tx_burst[idx], nb_tx); num -= nb_tx; idx += nb_tx; } } printf("Total packets inject to prime ports = %u\n", idx); packets_per_second = (link_mbps * 1000 * 1000) / ((PACKET_SIZE + FRAME_GAP + MAC_PREAMBLE) * CHAR_BIT); printf("Each port will do %"PRIu64" packets per second\n", packets_per_second); total_packets = RTE_TEST_DURATION * conf->nb_ports * packets_per_second; printf("Test will stop after at least %"PRIu64" packets received\n", + total_packets); diff_tsc = do_measure(conf, pkts_burst, total_packets); for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; int nb_free = 0; uint64_t timeout = 10000; do { /* dry out */ nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst, MAX_PKT_BURST); nb_tx = 0; while (nb_tx < nb_rx) rte_pktmbuf_free(pkts_burst[nb_tx++]); nb_free += nb_rx; if (unlikely(nb_rx == 0)) timeout--; } while (nb_free != pkt_per_port && timeout != 0); printf("free %d (expected %d) mbuf left in port %u\n", nb_free, pkt_per_port, portid); } if (count == 0) return -1; printf("%"PRIu64" packet, %"PRIu64" drop, %"PRIu64" idle\n", count, drop, idle); printf("Result: %"PRIu64" cycles per packet\n", diff_tsc / count); return 0; } static rte_atomic64_t start; static inline int poll_burst(void *args) { #define MAX_IDLE (10000) unsigned lcore_id; struct rte_mbuf **pkts_burst; uint64_t diff_tsc, cur_tsc; uint16_t next[RTE_MAX_ETHPORTS]; struct lcore_conf *conf; uint32_t pkt_per_port = *((uint32_t *)args); unsigned i, portid, nb_rx = 0; uint64_t total; uint64_t timeout = MAX_IDLE; int num[RTE_MAX_ETHPORTS]; lcore_id = rte_lcore_id(); conf = &lcore_conf[lcore_id]; if (conf->status != LCORE_USED) return 0; total = pkt_per_port * conf->nb_ports; printf("start to receive total expect %"PRIu64"\n", total); pkts_burst = (struct rte_mbuf **) rte_calloc_socket("poll_burst", total, sizeof(void *), RTE_CACHE_LINE_SIZE, conf->socketid); if (!pkts_burst) return -1; for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; next[portid] = i * pkt_per_port; num[portid] = pkt_per_port; } while (!rte_atomic64_read(&start)) ; cur_tsc = rte_rdtsc(); while (total) { for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; nb_rx = rte_eth_rx_burst(portid, 0, &pkts_burst[next[portid]], RTE_MIN(MAX_PKT_BURST, num[portid])); if (unlikely(nb_rx == 0)) { timeout--; if (unlikely(timeout == 0)) goto timeout; continue; } next[portid] += nb_rx; num[portid] -= nb_rx; total -= nb_rx; } } timeout: diff_tsc = rte_rdtsc() - cur_tsc; printf("%"PRIu64" packets lost, IDLE %"PRIu64" times\n", total, MAX_IDLE - timeout); /* clean up */ total = pkt_per_port * conf->nb_ports - total; for (i = 0; i < total; i++) rte_pktmbuf_free(pkts_burst[i]); rte_free(pkts_burst); if (total > 0) return diff_tsc / total; else return -1; } static int exec_burst(uint32_t flags, int lcore) { unsigned i, portid, nb_tx = 0; struct lcore_conf *conf; uint32_t pkt_per_port; int num, idx = 0; int diff_tsc; conf = &lcore_conf[lcore]; pkt_per_port = MAX_TRAFFIC_BURST; num = pkt_per_port * conf->nb_ports; rte_atomic64_init(&start); /* start polling thread, but not actually poll yet */ rte_eal_remote_launch(poll_burst, (void *)&pkt_per_port, lcore); /* Only when polling first */ if (flags == SC_BURST_POLL_FIRST) rte_atomic64_set(&start, 1); /* start xmit */ while (num) { nb_tx = RTE_MIN(MAX_PKT_BURST, num); for (i = 0; i < conf->nb_ports; i++) { portid = conf->portlist[i]; nb_tx = rte_eth_tx_burst(portid, 0, &tx_burst[idx], nb_tx); idx += nb_tx; num -= nb_tx; } } sleep(5); /* only when polling second */ if (flags == SC_BURST_XMIT_FIRST) rte_atomic64_set(&start, 1); /* wait for polling finished */ diff_tsc = rte_eal_wait_lcore(lcore); if (diff_tsc < 0) { printf("exec_burst: Failed to measure cycles per packet\n"); return -1; } printf("Result: %d cycles per packet\n", diff_tsc); return 0; } static int test_pmd_perf(void) { uint16_t nb_ports, num, nb_lcores, slave_id = (uint16_t)-1; uint16_t nb_rxd = MAX_TRAFFIC_BURST; uint16_t nb_txd = MAX_TRAFFIC_BURST; uint16_t portid; uint16_t nb_rx_queue = 1, nb_tx_queue = 1; int socketid = -1; int ret; printf("Start PMD RXTX cycles cost test.\n"); signal(SIGUSR1, signal_handler); signal(SIGUSR2, signal_handler); nb_ports = rte_eth_dev_count_avail(); if (nb_ports < NB_ETHPORTS_USED) { printf("At least %u port(s) used for perf. test\n", NB_ETHPORTS_USED); return -1; } nb_lcores = rte_lcore_count(); memset(lcore_conf, 0, sizeof(lcore_conf)); init_lcores(); init_mbufpool(NB_MBUF); if (sc_flag == SC_CONTINUOUS) { nb_rxd = RTE_TEST_RX_DESC_DEFAULT; nb_txd = RTE_TEST_TX_DESC_DEFAULT; } printf("CONFIG RXD=%d TXD=%d\n", nb_rxd, nb_txd); reset_count(); num = 0; RTE_ETH_FOREACH_DEV(portid) { if (socketid == -1) { socketid = rte_eth_dev_socket_id(portid); slave_id = alloc_lcore(socketid); if (slave_id == (uint16_t)-1) { printf("No avail lcore to run test\n"); return -1; } printf("Performance test runs on lcore %u socket %u\n", slave_id, socketid); } if (socketid != rte_eth_dev_socket_id(portid)) { printf("Skip port %d\n", portid); continue; } /* port configure */ ret = rte_eth_dev_configure(portid, nb_rx_queue, nb_tx_queue, &port_conf); if (ret < 0) rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n", ret, portid); ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]); if (ret < 0) rte_exit(EXIT_FAILURE, "Cannot get mac address: err=%d, port=%d\n", ret, portid); printf("Port %u ", portid); print_ethaddr("Address:", &ports_eth_addr[portid]); printf("\n"); /* tx queue setup */ ret = rte_eth_tx_queue_setup(portid, 0, nb_txd, socketid, &tx_conf); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, " "port=%d\n", ret, portid); /* rx queue steup */ ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd, socketid, &rx_conf, mbufpool[socketid]); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d," "port=%d\n", ret, portid); /* Start device */ stop = 0; ret = rte_eth_dev_start(portid); if (ret < 0) rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n", ret, portid); /* always eanble promiscuous */ ret = rte_eth_promiscuous_enable(portid); if (ret != 0) rte_exit(EXIT_FAILURE, "rte_eth_promiscuous_enable: err=%s, port=%d\n", rte_strerror(-ret), portid); lcore_conf[slave_id].portlist[num++] = portid; lcore_conf[slave_id].nb_ports++; } check_all_ports_link_status(nb_ports, RTE_PORT_ALL); if (tx_burst == NULL) { tx_burst = (struct rte_mbuf **) rte_calloc_socket("tx_buff", MAX_TRAFFIC_BURST * nb_ports, sizeof(void *), RTE_CACHE_LINE_SIZE, socketid); if (!tx_burst) return -1; } init_traffic(mbufpool[socketid], tx_burst, MAX_TRAFFIC_BURST * nb_ports); printf("Generate %d packets @socket %d\n", MAX_TRAFFIC_BURST * nb_ports, socketid); if (sc_flag == SC_CONTINUOUS) { /* do both rxtx by default */ if (NULL == do_measure) do_measure = measure_rxtx; rte_eal_remote_launch(main_loop, NULL, slave_id); if (rte_eal_wait_lcore(slave_id) < 0) return -1; } else if (sc_flag == SC_BURST_POLL_FIRST || sc_flag == SC_BURST_XMIT_FIRST) if (exec_burst(sc_flag, slave_id) < 0) return -1; /* port tear down */ RTE_ETH_FOREACH_DEV(portid) { if (socketid != rte_eth_dev_socket_id(portid)) continue; rte_eth_dev_stop(portid); } return 0; } int test_set_rxtx_conf(cmdline_fixed_string_t mode) { printf("mode switch to %s\n", mode); if (!strcmp(mode, "vector")) { /* vector rx, tx */ tx_conf.tx_rs_thresh = 32; tx_conf.tx_free_thresh = 32; return 0; } else if (!strcmp(mode, "scalar")) { /* bulk alloc rx, full-featured tx */ tx_conf.tx_rs_thresh = 32; tx_conf.tx_free_thresh = 32; port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_CHECKSUM; return 0; } else if (!strcmp(mode, "hybrid")) { /* bulk alloc rx, vector tx * when vec macro not define, * using the same rx/tx as scalar */ tx_conf.tx_rs_thresh = 32; tx_conf.tx_free_thresh = 32; port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_CHECKSUM; return 0; } else if (!strcmp(mode, "full")) { /* full feature rx,tx pair */ tx_conf.tx_rs_thresh = 32; tx_conf.tx_free_thresh = 32; port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_SCATTER; return 0; } return -1; } int test_set_rxtx_anchor(cmdline_fixed_string_t type) { printf("type switch to %s\n", type); if (!strcmp(type, "rxtx")) { do_measure = measure_rxtx; return 0; } else if (!strcmp(type, "rxonly")) { do_measure = measure_rxonly; return 0; } else if (!strcmp(type, "txonly")) { do_measure = measure_txonly; return 0; } return -1; } int test_set_rxtx_sc(cmdline_fixed_string_t type) { printf("stream control switch to %s\n", type); if (!strcmp(type, "continuous")) { sc_flag = SC_CONTINUOUS; return 0; } else if (!strcmp(type, "poll_before_xmit")) { sc_flag = SC_BURST_POLL_FIRST; return 0; } else if (!strcmp(type, "poll_after_xmit")) { sc_flag = SC_BURST_XMIT_FIRST; return 0; } return -1; } REGISTER_TEST_COMMAND(pmd_perf_autotest, test_pmd_perf); 12/05/2020 11:40:06 dut.10.240.183.61: sed -i -e 's/#define MAX_TRAFFIC_BURST 2048/#define MAX_TRAFFIC_BURST 32/' app/test/test_pmd_perf.c 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 dut.10.240.183.61: cp app/test/test_pmd_perf.c /tmp/test_pmd_perf.c 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 TestUnitTestsLoopback: Test Case test_link_mode Begin 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 tester: 12/05/2020 11:40:06 dut.10.240.183.61: sed -i -e 's/lpbk_mode = 1/lpbk_mode = 0/' app/test/test_pmd_perf.c 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 dut.10.240.183.61: sed -i -e '/check_all_ports_link_status(nb_ports, RTE_PORT_ALL);/a\ sleep(6);' app/test/test_pmd_perf.c 12/05/2020 11:40:06 dut.10.240.183.61: 12/05/2020 11:40:06 dut.10.240.183.61: make -j 70 app/test_sub O=x86_64-native-linuxapp-gcc 12/05/2020 11:40:08 dut.10.240.183.61: app/test_sub == Build app/test CC test_pmd_perf.o LD test INSTALL-APP test INSTALL-MAP test.map 12/05/2020 11:40:08 tester: rm -rf ./getPackageByTcpdump.cap 12/05/2020 11:40:08 tester: 12/05/2020 11:40:08 tester: tcpdump -i enp177s0f0 -w ./getPackageByTcpdump.cap 2> /dev/null& 12/05/2020 11:40:08 tester: [1] 210673 12/05/2020 11:40:08 dut.10.240.183.61: ./x86_64-native-linuxapp-gcc/app/test -l 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71 -n 4 --file-prefix=dpdk_210396_20200512113949 12/05/2020 11:40:10 dut.10.240.183.61: EAL: Detected 72 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_210396_20200512113949/mp_socket EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:af:00.0 (socket 1) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 11:40:10 dut.10.240.183.61: pmd_perf_autotest 12/05/2020 11:40:40 dut.10.240.183.61: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 Allocated mbuf pool on socket 1 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 18 socket 1 Port 0 Address:00:00:00:00:01:00 Checking link statuses... Port0 Link Up. Speed 40000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 32 packets @socket 1 inject 32 packet to port 0 Total packets inject to prime ports = 32 Each port will do 59523809 packets per second Test will stop after at least 119047618 packets received 12/05/2020 11:40:40 dut.10.240.183.61: kill_all: called by dut and prefix list has value. 12/05/2020 11:40:42 dut.10.240.183.61: Killed [PEXPECT]# 12/05/2020 11:40:42 tester: killall tcpdump 12/05/2020 11:40:42 tester: 12/05/2020 11:40:42 tester: tcpdump -nn -e -v -r ./getPackageByTcpdump.cap 12/05/2020 11:40:42 tester: reading from file ./getPackageByTcpdump.cap, link-type EN10MB (Ethernet) 11:40:16.572505 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572519 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572522 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572526 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572529 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572532 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572535 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572538 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572542 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572545 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572548 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572551 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572555 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572558 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572561 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572564 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572567 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572570 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572573 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572577 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572580 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572583 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572588 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572591 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572594 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572597 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572600 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572604 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572607 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572611 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572614 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 11:40:16.572617 00:ff:aa:ff:aa:ff > 00:aa:ff:aa:ff:aa, ethertype IPv4 (0x0800), length 60: (tos 0x0, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 46) 10.0.0.1.0 > 10.0.0.2.0: UDP, length 18 [1]+ Done tcpdump -i enp177s0f0 -w ./getPackageByTcpdump.cap 2> /dev/null 12/05/2020 11:40:42 TestUnitTestsLoopback: Test Case test_link_mode Result PASSED: 12/05/2020 11:40:42 dut.10.240.183.61: cp /tmp/test_pmd_perf.c app/test/test_pmd_perf.c 12/05/2020 11:40:43 dut.10.240.183.61: 12/05/2020 11:40:43 dut.10.240.183.61: kill_all: called by dut and has no prefix list. 12/05/2020 11:40:43 TestUnitTestsLoopback: Test Case test_loopback_mode Begin 12/05/2020 11:40:43 dut.10.240.183.61: 12/05/2020 11:40:43 tester: 12/05/2020 11:40:43 dut.10.240.183.61: sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' app/test/test_pmd_perf.c 12/05/2020 11:40:43 dut.10.240.183.61: 12/05/2020 11:40:43 dut.10.240.183.61: make -j 70 app/test_sub O=x86_64-native-linuxapp-gcc 12/05/2020 11:40:45 dut.10.240.183.61: app/test_sub == Build app/test CC test_pmd_perf.o LD test INSTALL-APP test INSTALL-MAP test.map 12/05/2020 11:40:45 tester: rm -rf ./getPackageByTcpdump.cap 12/05/2020 11:40:46 tester: 12/05/2020 11:40:46 tester: tcpdump -i enp177s0f0 ether[12:2] != '0x88cc' -w ./getPackageByTcpdump.cap 2> /dev/null& 12/05/2020 11:40:46 tester: [1] 210723 12/05/2020 11:40:46 dut.10.240.183.61: ./x86_64-native-linuxapp-gcc/app/test -l 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71 -n 4 --file-prefix=dpdk_210396_20200512113949 12/05/2020 11:40:47 dut.10.240.183.61: EAL: Detected 72 lcore(s) EAL: Detected 2 NUMA nodes EAL: Multi-process socket /var/run/dpdk/dpdk_210396_20200512113949/mp_socket EAL: Selected IOVA mode 'VA' EAL: Probing VFIO support... EAL: VFIO support initialized EAL: using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_i40e (8086:1583) device: 0000:af:00.0 (socket 1) No telemetry legacy support - No legacy callbacks, legacy socket not created APP: HPET is not enabled, using TSC as default timer 12/05/2020 11:40:47 dut.10.240.183.61: pmd_perf_autotest 12/05/2020 11:41:02 dut.10.240.183.61: pmd_perf_autotest Start PMD RXTX cycles cost test. Allocated mbuf pool on socket 0 Allocated mbuf pool on socket 1 CONFIG RXD=1024 TXD=1024 Performance test runs on lcore 18 socket 1 Port 0 Address:00:00:00:00:01:00 Checking link statuses... Port0 Link Up. Speed 40000 Mbps - full-duplex IPv4 pktlen 46 UDP pktlen 26 Generate 32 packets @socket 1 inject 32 packet to port 0 Total packets inject to prime ports = 32 Each port will do 59523809 packets per second Test will stop after at least 119047618 packets received free 32 (expected 32) mbuf left in port 0 119047620 packet, 0 drop, 562437813 idle Result: 281 cycles per packet Test OK 12/05/2020 11:41:02 dut.10.240.183.61: quit 12/05/2020 11:41:02 dut.10.240.183.61: quit 12/05/2020 11:41:02 tester: killall tcpdump 12/05/2020 11:41:02 tester: 12/05/2020 11:41:02 tester: tcpdump -nn -e -v -r ./getPackageByTcpdump.cap 12/05/2020 11:41:02 tester: reading from file ./getPackageByTcpdump.cap, link-type EN10MB (Ethernet) [1]+ Done tcpdump -i enp177s0f0 ether[12:2] != '0x88cc' -w ./getPackageByTcpdump.cap 2> /dev/null 12/05/2020 11:41:02 TestUnitTestsLoopback: Test Case test_loopback_mode Result PASSED: 12/05/2020 11:41:02 dut.10.240.183.61: cp /tmp/test_pmd_perf.c app/test/test_pmd_perf.c 12/05/2020 11:41:02 dut.10.240.183.61: 12/05/2020 11:41:02 dut.10.240.183.61: kill_all: called by dut and prefix list has value. 12/05/2020 11:41:02 dts: TEST SUITE ENDED: TestUnitTestsLoopback ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test 2020-05-12 5:58 [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao Qimai 2020-05-12 5:58 ` [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update Xiao Qimai 2020-05-12 6:11 ` [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao, QimaiX @ 2020-06-02 5:47 ` Tu, Lijuan 2 siblings, 0 replies; 5+ messages in thread From: Tu, Lijuan @ 2020-06-02 5:47 UTC (permalink / raw) To: Xiao, QimaiX, dts; +Cc: Xiao, QimaiX Applied, thanks > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xiao Qimai > Sent: Tuesday, May 12, 2020 1:58 PM > To: dts@dpdk.org > Cc: Xiao, QimaiX <qimaix.xiao@intel.com> > Subject: [dts] [PATCH V1]unit_tests_loopback: update compile cmd of > app/test > > *. update compile cmd of app/test according to dpdk's update > > Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com> > --- > tests/TestSuite_unit_tests_loopback.py | 24 +++++++++++++----------- > 1 file changed, 13 insertions(+), 11 deletions(-) > > diff --git a/tests/TestSuite_unit_tests_loopback.py > b/tests/TestSuite_unit_tests_loopback.py > index 68b1f30..c1d37b2 100644 > --- a/tests/TestSuite_unit_tests_loopback.py > +++ b/tests/TestSuite_unit_tests_loopback.py > @@ -70,6 +70,8 @@ class TestUnitTestsLoopback(TestCase): > self.verify(self.arch in ["x86_64", "arm64"], "pmd perf request running > in x86_64 or arm64") > self.max_traffic_burst = self.get_max_traffic_burst() > self.dut.send_expect("sed -i -e 's/#define > MAX_TRAFFIC_BURST %s/#define MAX_TRAFFIC_BURST 32/' > app/test/test_pmd_perf.c" % self.max_traffic_burst, "# ", 30) > + self.tmp_path = '/tmp/test_pmd_perf.c' > + self.dut.send_expect("cp app/test/test_pmd_perf.c %s" % > + self.tmp_path, "# ") > > def set_up(self): > """ > @@ -90,14 +92,14 @@ class TestUnitTestsLoopback(TestCase): > Run pmd stream control mode burst test case. > """ > self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' > app/test/test_pmd_perf.c", "# ", 30) > - out = self.dut.build_dpdk_apps('app/test') > - self.verify("Error" not in out, "Compilation error") > + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % > (self.dut.number_of_cores, self.target), "#") > + self.verify("Error" not in out, "compilation l3fwd-power > + error") > self.verify("No such" not in out, "Compilation error") > > self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") > - self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap > 2> /dev/null& " % self.tester_itf, "#") > + self.tester.send_expect("tcpdump -i %s ether[12:2] != '0x88cc' > + -w ./getPackageByTcpdump.cap 2> /dev/null& " % self.tester_itf, "#") > eal_params = self.dut.create_eal_parameters(cores=self.cores) > - self.dut.send_expect("./app/test/test %s" % (eal_params), > "R.*T.*E.*>.*>", 60) > + self.dut.send_expect("./%s/app/test %s" % (self.target, > + eal_params), "R.*T.*E.*>.*>", 60) > out = self.dut.send_expect("pmd_perf_autotest", "RTE>>", 120) > print(out) > self.dut.send_expect("quit", "# ") @@ -113,14 +115,14 @@ class > TestUnitTestsLoopback(TestCase): > """ > self.dut.send_expect("sed -i -e 's/lpbk_mode = 1/lpbk_mode = 0/' > app/test/test_pmd_perf.c", "# ", 30) > self.dut.send_expect("sed -i -e '/check_all_ports_link_status(nb_ports, > RTE_PORT_ALL);/a\ sleep(6);' app/test/test_pmd_perf.c", "# ", 30) > - out = self.dut.build_dpdk_apps('app/test') > - self.verify("Error" not in out, "Compilation error") > + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % > (self.dut.number_of_cores, self.target), "#") > + self.verify("Error" not in out, "compilation l3fwd-power > + error") > self.verify("No such" not in out, "Compilation error") > > self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#") > self.tester.send_expect("tcpdump -i %s -w ./getPackageByTcpdump.cap > 2> /dev/null& " % self.tester_itf, "#") > eal_params = self.dut.create_eal_parameters(cores=self.cores) > - self.dut.send_expect("./app/test/test %s" % (eal_params), > "R.*T.*E.*>.*>", 60) > + self.dut.send_expect("./%s/app/test %s" % (self.target, > + eal_params), "R.*T.*E.*>.*>", 60) > self.dut.send_command("pmd_perf_autotest", 30) > # There is no packet loopback, so the test is hung. > # It needs to kill the process manually. > @@ -133,16 +135,16 @@ class TestUnitTestsLoopback(TestCase): > """ > Run after each test case. > """ > + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % > + self.tmp_path, "# ") > self.dut.kill_all() > > def tear_down_all(self): > """ > Run after each test suite. > """ > - self.dut.send_expect("sed -i -e 's/lpbk_mode = 0/lpbk_mode = 1/' > app/test/test_pmd_perf.c", "# ", 30) > - self.dut.send_expect("sed -i -e '/sleep(6)/d' app/test/test_pmd_perf.c", > "# ", 30) > + self.dut.send_expect("cp %s app/test/test_pmd_perf.c" % > + self.tmp_path, "# ") > self.dut.send_expect("sed -i -e 's/#define MAX_TRAFFIC_BURST > 32/#define MAX_TRAFFIC_BURST %s/' app/test/test_pmd_perf.c" % > self.max_traffic_burst, "# ", 30) > - out = self.dut.build_dpdk_apps('app/test') > - self.verify("Error" not in out, "Compilation error") > + out = self.dut.send_expect("make -j %s app/test_sub O=%s" % > (self.dut.number_of_cores, self.target), "#") > + self.verify("Error" not in out, "compilation l3fwd-power > + error") > self.verify("No such" not in out, "Compilation error") > self.dut.kill_all() > -- > 1.8.3.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-06-02 5:49 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-12 5:58 [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao Qimai 2020-05-12 5:58 ` [dts] [PATCH V1 1/2]unit_tests_pmd_perf: change compile cmd of app/test according to dpdk's update Xiao Qimai 2020-05-12 6:09 ` Xiao, QimaiX 2020-05-12 6:11 ` [dts] [PATCH V1]unit_tests_loopback: update compile cmd of app/test Xiao, QimaiX 2020-06-02 5:47 ` Tu, Lijuan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).