* [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan: add l2tp and esp to dcf switch filter
@ 2020-06-01 23:40 Fu Qi
2020-06-02 5:48 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Fu Qi @ 2020-06-01 23:40 UTC (permalink / raw)
To: dts; +Cc: Fu Qi
Add l2tpv3 and esp patterns to cvl dcf switch filter.
Signed-off-by: Fu Qi <qi.fu@intel.com>
---
.../cvl_dcf_switch_filter_test_plan.rst | 276 +++++++++++++++++-
1 file changed, 274 insertions(+), 2 deletions(-)
diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst b/test_plans/cvl_dcf_switch_filter_test_plan.rst
index e22f090..9d415f7 100644
--- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
@@ -153,8 +153,24 @@ Pattern and input set
+---------------------+-------------------------------+-------------------------------------------+
| VLAN filter | VLAN filter | [VLAN] |
+---------------------+-------------------------------+-------------------------------------------+
+ | | MAC_IPV4_L2TPv3 | [Source IP], [Dest IP], [Session_id] |
+ | L2TPv3 +-------------------------------+-------------------------------------------+
+ | | MAC_IPV6_L2TPv3 | [Source IP], [Dest IP], [Session_id] |
+ +---------------------+-------------------------------+-------------------------------------------+
+ | | MAC_IPV4_ESP | [Source IP], [Dest IP], [SPI] |
+ | +-------------------------------+-------------------------------------------+
+ | | MAC_IPV6_ESP | [Source IP], [Dest IP], [SPI] |
+ | +-------------------------------+-------------------------------------------+
+ | | MAC_IPV4_AH | [Source IP], [Dest IP], [SPI] |
+ | ESP +-------------------------------+-------------------------------------------+
+ | | MAC_IPV6_AH | [Source IP], [Dest IP], [SPI] |
+ | +-------------------------------+-------------------------------------------+
+ | | MAC_IPV4_NAT-T-ESP | [Source IP], [Dest IP], [SPI] |
+ | +-------------------------------+-------------------------------------------+
+ | | MAC_IPV6_NAT-T-ESP | [Source IP], [Dest IP], [SPI] |
+ +---------------------+-------------------------------+-------------------------------------------+
-
+
Supported function type
-----------------------
@@ -1755,6 +1771,262 @@ Test case: VLAN filter
send matched packets, check the packets are not to port 1.
+Test case: MAC_IPV4_L2TPv3
+==========================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / l2tpv3oip session_id is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2', proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2', proto=115)/L2TP('\x00\x00\x00\x02')/('X'*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.1.2', proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst='00:11:22:33:44:12')/IP(dst='192.168.0.2', proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV6_L2TPv3
+==========================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / l2tpv3oip session_id is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x02')/('X'*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6666:7777:9999', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst='00:11:22:33:44:13')/IPv6(src='1111:2222:3333:4444:5555:6666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV4_ESP
+=======================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / esp spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2", proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2", proto=50)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2", proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2", proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV6_ESP
+=======================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / esp spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888", nh=50)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:9999", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV4_AH
+======================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / ah spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2", proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2", proto=51)/AH(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2", proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2", proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV6_AH
+======================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / ah spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888", nh=51)/AH(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:9999", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV4_NAT-T-ESP
+=============================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 / udp / esp spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2")/UDP(dport=4500)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
+Test case: MAC_IPV6_NAT-T-ESP
+=============================
+
+1. create a rule::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / udp / esp spi is 1 / end actions vf id 1 / end
+ testpmd> flow list 0
+
+ check the rule exists in the list.
+
+2. send matched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check port 1 receive the packet.
+ send mismatched packets::
+
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=4500)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:9999")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+ sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=4500)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
+
+ check the packets are not to port 1.
+
+3. verify rules can be destroyed::
+
+ testpmd> flow destroy 0 rule 0
+ testpmd> flow list 0
+
+ check the rule not exists in the list.
+ send matched packets, check the packets are not to port 1.
+
+
Test case: negative cases
=========================
@@ -1831,7 +2103,7 @@ Subcase 4: unsupported pattern in os default, but supported in comms
check the rule not exists in the list.
-5. repeat step 2-5 with also not supported pattern MAC_IPV4_PFCP_NODE, get the same result.
+5. repeat step 2-5 with also not supported pattern MAC_IPV4_PFCP_NODE/MAC_IPV4_L2TPv3/MAC_IPV4_ESP, get the same result.
Subcase 5: unsupported input set
--------------------------------
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan: add l2tp and esp to dcf switch filter
2020-06-01 23:40 [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan: add l2tp and esp to dcf switch filter Fu Qi
@ 2020-06-02 5:48 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-06-02 5:48 UTC (permalink / raw)
To: Fu, Qi, dts; +Cc: Fu, Qi
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Fu Qi
> Sent: Tuesday, June 2, 2020 7:41 AM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>
> Subject: [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan: add l2tp
> and esp to dcf switch filter
>
> Add l2tpv3 and esp patterns to cvl dcf switch filter.
>
> Signed-off-by: Fu Qi <qi.fu@intel.com>
> ---
> .../cvl_dcf_switch_filter_test_plan.rst | 276 +++++++++++++++++-
> 1 file changed, 274 insertions(+), 2 deletions(-)
>
> diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst
> b/test_plans/cvl_dcf_switch_filter_test_plan.rst
> index e22f090..9d415f7 100644
> --- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
> +++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
> @@ -153,8 +153,24 @@ Pattern and input set
> +---------------------+-------------------------------+-----------------------------------------
> --+
> | VLAN filter | VLAN filter | [VLAN] |
> +---------------------+-------------------------------+-----------------------------------------
> --+
> + | | MAC_IPV4_L2TPv3 | [Source IP], [Dest IP],
> [Session_id] |
> + | L2TPv3 +-------------------------------+------------------------------------------
> -+
> + | | MAC_IPV6_L2TPv3 | [Source IP], [Dest IP],
> [Session_id] |
> + +---------------------+-------------------------------+-----------------------------------------
> --+
> + | | MAC_IPV4_ESP | [Source IP], [Dest IP], [SPI]
> |
> + | +-------------------------------+-------------------------------------------+
> + | | MAC_IPV6_ESP | [Source IP], [Dest IP], [SPI]
> |
> + | +-------------------------------+-------------------------------------------+
> + | | MAC_IPV4_AH | [Source IP], [Dest IP], [SPI]
> |
> + | ESP +-------------------------------+-------------------------------------------+
> + | | MAC_IPV6_AH | [Source IP], [Dest IP], [SPI]
> |
> + | +-------------------------------+-------------------------------------------+
> + | | MAC_IPV4_NAT-T-ESP | [Source IP], [Dest IP], [SPI]
> |
> + | +-------------------------------+-------------------------------------------+
> + | | MAC_IPV6_NAT-T-ESP | [Source IP], [Dest IP], [SPI]
> |
> + +---------------------+-------------------------------+-----------------------------------------
> --+
>
> -
> +
> Supported function type
> -----------------------
>
> @@ -1755,6 +1771,262 @@ Test case: VLAN filter
> send matched packets, check the packets are not to port 1.
>
>
> +Test case: MAC_IPV4_L2TPv3
> +==========================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / l2tpv3oip session_id is 1 / end actions vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2',
> proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2',
> proto=115)/L2TP('\x00\x00\x00\x02')/('X'*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.1.2',
> proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(dst='192.168.0.2',
> proto=115)/L2TP('\x00\x00\x00\x01')/('X'*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV6_L2TPv3
> +==========================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is
> 1111:2222:3333:4444:5555:6666:7777:8888 / l2tpv3oip session_id is 1 / end
> actions vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> +
> sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6
> 666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)],
> iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> +
> sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6
> 666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x02')/('X'*480)],
> iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst='00:11:22:33:44:13')/IPv6(dst='1111:2222:3333:4444:5555:6
> 666:7777:9999', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)],
> iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst='00:11:22:33:44:13')/IPv6(src='1111:2222:3333:4444:5555:6
> 666:7777:8888', nh=115)/L2TP('\x00\x00\x00\x01')/('X'*480)],
> iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV4_ESP
> +=======================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / esp spi is 1 / end actions vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=50)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2",
> proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2",
> proto=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV6_ESP
> +=======================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is
> 1111:2222:3333:4444:5555:6666:7777:8888 / esp spi is 1 / end actions vf id 1
> / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=50)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:9999", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=50)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV4_AH
> +======================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / ah spi is 1 / end actions vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=51)/AH(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2",
> proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2",
> proto=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV6_AH
> +======================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is
> 1111:2222:3333:4444:5555:6666:7777:8888 / ah spi is 1 / end actions vf id 1 /
> end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=51)/AH(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:9999", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:
> 6666:7777:8888", nh=51)/AH(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV4_NAT-T-ESP
> +=============================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / udp / esp spi is 1 / end actions vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2")/UDP(dport=450
> 0)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2")/UDP(dport=450
> 0)/ESP(spi=2)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.1.2")/UDP(dport=450
> 0)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IP(dst="192.168.0.2")/UDP(dport=450
> 0)/ESP(spi=1)/("X"*480)], iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> +Test case: MAC_IPV6_NAT-T-ESP
> +=============================
> +
> +1. create a rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv6 dst is
> 1111:2222:3333:4444:5555:6666:7777:8888 / udp / esp spi is 1 / end actions
> vf id 1 / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +2. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888")/UDP(dport=4500)/ESP(spi=1)/("X"*480)],
> iface="enp27s0f0", count=1)
> +
> + check port 1 receive the packet.
> + send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:8888")/UDP(dport=4500)/ESP(spi=2)/("X"*480)],
> iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(dst="1111:2222:3333:4444:5555:
> 6666:7777:9999")/UDP(dport=4500)/ESP(spi=1)/("X"*480)],
> iface="enp27s0f0", count=1)
> +
> sendp([Ether(dst="00:11:22:33:44:13")/IPv6(src="1111:2222:3333:4444:5555:
> 6666:7777:8888")/UDP(dport=4500)/ESP(spi=1)/("X"*480)],
> iface="enp27s0f0", count=1)
> +
> + check the packets are not to port 1.
> +
> +3. verify rules can be destroyed::
> +
> + testpmd> flow destroy 0 rule 0
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> + send matched packets, check the packets are not to port 1.
> +
> +
> Test case: negative cases
> =========================
>
> @@ -1831,7 +2103,7 @@ Subcase 4: unsupported pattern in os default, but
> supported in comms
>
> check the rule not exists in the list.
>
> -5. repeat step 2-5 with also not supported pattern MAC_IPV4_PFCP_NODE,
> get the same result.
> +5. repeat step 2-5 with also not supported pattern
> MAC_IPV4_PFCP_NODE/MAC_IPV4_L2TPv3/MAC_IPV4_ESP, get the same
> result.
>
> Subcase 5: unsupported input set
> --------------------------------
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-02 5:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-01 23:40 [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan: add l2tp and esp to dcf switch filter Fu Qi
2020-06-02 5:48 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).