Re: [dts] [PATCH V1]test_plans/cvl_advanced_iavf_rss_test_plan: add l2tp and esp to advanced iavf rss

test suite reviews and discussions
 help / color / mirror / Atom feed

From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Fu, Qi" <qi.fu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Fu, Qi" <qi.fu@intel.com>
Subject: Re: [dts] [PATCH V1]test_plans/cvl_advanced_iavf_rss_test_plan: add	l2tp and esp to advanced iavf rss
Date: Wed, 3 Jun 2020 02:30:06 +0000	[thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC587BE@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200602165256.89377-1-qi.fu@intel.com>

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Fu Qi
> Sent: Wednesday, June 3, 2020 12:53 AM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>
> Subject: [dts] [PATCH V1]test_plans/cvl_advanced_iavf_rss_test_plan: add
> l2tp and esp to advanced iavf rss
> 
> Add l2tpv3 and esp patterns to advanced iavf rss test plan.
> 
> Signed-off-by: Fu Qi <qi.fu@intel.com>
> ---
>  .../cvl_advanced_iavf_rss_test_plan.rst       | 228 +++++++++++++++++-
>  1 file changed, 226 insertions(+), 2 deletions(-)
> 
> diff --git a/test_plans/cvl_advanced_iavf_rss_test_plan.rst
> b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
> index ce68ebb..f326725 100644
> --- a/test_plans/cvl_advanced_iavf_rss_test_plan.rst
> +++ b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
> @@ -198,6 +198,19 @@ Pattern and input set
>      +-------------------------------+---------------------------+----------------------------------
> ----------------------------------------------+
>      |                               | MAC_IPV6_SIMPLE_XOR       | [Dest MAC]ï¼Œ[Source
> IP], [Dest IP]                                              |
>      +-------------------------------+---------------------------+----------------------------------
> ----------------------------------------------+
> +    |                               | MAC_IPV4_L2TPv3           | [Session ID]
> |
> +    +-------------------------------+---------------------------+---------------------------------
> -----------------------------------------------+
> +    |                               | MAC_IPV6_L2TPv3           | [Session ID]
> |
> +    +-------------------------------+---------------------------+---------------------------------
> -----------------------------------------------+
> +    |                               | MAC_IPV4_ESP              | [SPI]
> |
> +    +-------------------------------+---------------------------+---------------------------------
> -----------------------------------------------+
> +    |                               | MAC_IPV6_ESP              | [SPI]
> |
> +    +-------------------------------+---------------------------+---------------------------------
> -----------------------------------------------+
> +    |                               | MAC_IPV4_AH               | [SPI]
> |
> +    +-------------------------------+---------------------------+---------------------------------
> -----------------------------------------------+
> +    |                               | MAC_IPV6_AH               | [SPI]
> |
> +
> + +-------------------------------+---------------------------+---------
> + ----------------------------------------------------------------------
> + -+
> +
> 
>  Default parameters
>  ------------------
> @@ -2121,7 +2134,187 @@ Test case:
> SYMMETRIC_TOEPLITZ_VXLAN_IPV6_ICMP:
> 
>  #. Destory rule on port 0
>           testpmd> flow flush 0
> -
> +
> +Test case: MAC_IPV4_L2TPv3:
> +===========================
> +#. DUT create rule for the RSS type for MAC_IPV4_L2TPv3::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end
> actions rss types l2tpv3 end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_L2TPv3 pkts with different
> session ID::
> +
> +        sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",
> proto=115)/L2TP('\x00\x00\x00\x11')/Raw('x'*480)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV4 L2TPV3OIP => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_L2TPv3 pkts with different
> session ID::
> +
> +        sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",
> proto=115)/L2TP('\x00\x00\x00\x11')/Raw('x'*480)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: MAC_IPV6_L2TPv3:
> +===========================
> +#. DUT create rule for the RSS type for MAC_IPV6_L2TPv3::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv6 / l2tpv3oip / end
> actions rss types l2tpv3 end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_L2TPv3 pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=115)/L2TP('\x00\x00\x00\x1
> 1')/Raw('x'*480)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV6 L2TPV3OIP => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_L2TPv3 pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=115)/L2TP('\x00\x00\x00\x1
> 1')/Raw('x'*480)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: MAC_IPV4_ESP:
> +========================
> +#. DUT create rule for the RSS type for MAC_IPV4_ESP::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv4 / esp / end actions rss
> types esp end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_ESP pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=50)/ESP(spi=11)/Raw('x'*48
> 0)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV4 ESP => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_ESP pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=50)/ESP(spi=11)/Raw('x'*48
> 0)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: MAC_IPV6_ESP:
> +========================
> +#. DUT create rule for the RSS type for MAC_IPV6_ESP::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv6 / esp / end actions rss
> types esp end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_ESP pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=50)/ESP(spi=11)/Raw('x'*480
> )], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV6 ESP => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_ESP pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=50)/ESP(spi=11)/Raw('x'*480
> )], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: MAC_IPV4_AH:
> +=======================
> +#. DUT create rule for the RSS type for MAC_IPV4_AH::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv4 / ah / end actions rss
> types esp end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_AH pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=51)/AH(spi=11)/Raw('x'*480
> )], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV4 AH => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_AH pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=51)/AH(spi=11)/Raw('x'*480
> )], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: MAC_IPV6_AH:
> +=======================
> +#. DUT create rule for the RSS type for MAC_IPV6_AH::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv6 / ah / end actions rss
> types esp end key_len 0 queues end / end
> +        testpmd>start
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_AH pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=51)/AH(spi=11)/Raw('x'*480)
> ], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in differently 16 queues evenly with differently RSS hash value::
> +
> +        testpmd> stop
> +
> +#. check the flow can be listed and destory rule on port 0::
> +
> +        testpmd> flow list 0
> +        ID      Group   Prio    Attr    Rule
> +        0       0       0       i--     ETH IPV6 AH => RSS
> +        testpmd> flow flush 0
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_AH pkts with different
> session ID::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=51)/AH(spi=11)/Raw('x'*480)
> ], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
>  Test case: SIMPLE_XOR:
>  ======================
>  #. create rule for the rss type simple_xor::
> @@ -3651,6 +3844,36 @@ Test case: Use OS default package for the
> MAC_IPV4_GTPU_FRAG and IPV4 L3 src onl
>          iavf_flow_create(): Failed to create flow
>          port_flow_complain(): Caught PMD error type 2 (flow rule (handle)):
> Failed to create parser engine.: Invalid argument
> 
> +Test case: Use OS default package for the MAC_IPV4_L2TPv3:
> +==========================================================
> +#. Load OS package
> +
> +#. Create rule for the rss type MAC_IPV4_L2TPv3::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip /
> + end actions rss types l2tpv3 end key_len 0 queues end / end
> +
> +#. Tester use scapy to send the 100 MAC_IPV4_L2TPv3 pkts with different
> session ID::
> +
> +        sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.3",
> proto=115)/L2TP('\x00\x00\x00\x11')/Raw('x'*480)], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
> +Test case: Use OS default package for the MAC_IPV6_ESP:
> +==========================================================
> +#. Load OS package
> +
> +#. Create rule for the rss type MAC_IPV6_ESP::
> +
> +        testpmd>flow create 0 ingress pattern eth / ipv6 / esp / end
> + actions rss types l2tpv3 end key_len 0 queues end / end
> +
> +#. Tester use scapy to send the 100 MAC_IPV6_ESP pkts with different spi::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=50)/ESP(spi=11)/Raw('x'*480
> )], iface="enp134s0f0")
> +        ...
> +
> +#. Verify 100 pkts has been sent, and check the 100 pkts has been recieved
> by DUT in the same queue.
> +
>  Test case: Check rssh hash in mutil VFS
> =======================================
>  1. Generate 2 VFs on PF0 and set mac address for each VF::
> @@ -3887,5 +4110,6 @@ both of the rules can't be created successfully.
> 
> 
> 
> +
> 
> -
> \ No newline at end of file
> +
> --
> 2.17.1

     prev parent reply	other threads:[~2020-06-03  2:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-02 16:52 Fu Qi
2020-06-03  2:30 ` Tu, Lijuan [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC587BE@SHSMSX101.ccr.corp.intel.com \
    --to=lijuan.tu@intel.com \
    --cc=dts@dpdk.org \
    --cc=qi.fu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).