From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Zhang, XiX" <xix.zhang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhang, XiX" <xix.zhang@intel.com>
Subject: Re: [dts] [PATCH V1] tests/TestSuite_ddp_gtp:modify pf case not start vm
Date: Mon, 20 Jul 2020 06:55:20 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC82132@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1593746716-29771-1-git-send-email-xix.zhang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of xizhan4x
> Sent: 2020年7月3日 11:25
> To: dts@dpdk.org
> Cc: Zhang, XiX <xix.zhang@intel.com>
> Subject: [dts] [PATCH V1] tests/TestSuite_ddp_gtp:modify pf case not start vm
>
>
> modify pf case not start vm env
>
>
> Signed-off-by: xizhan4x <xix.zhang@intel.com>
> ---
> tests/TestSuite_ddp_gtp.py | 61 +++++++++++++++++++++++++++++++++--------
> -----
> 1 file changed, 44 insertions(+), 17 deletions(-)
>
> diff --git a/tests/TestSuite_ddp_gtp.py b/tests/TestSuite_ddp_gtp.py index
> e7aa96e..972c401 100644
> --- a/tests/TestSuite_ddp_gtp.py
> +++ b/tests/TestSuite_ddp_gtp.py
> @@ -43,10 +43,39 @@ class TestDdpGtp(TestCase):
> else:
> self.vf_assign_method = 'vfio-pci'
> self.dut.send_expect('modprobe vfio-pci', '#')
> + def insmod_modprobe(self,modename=''):
> + """
> + Insmod modProbe before run test case
> + """
> + if modename == "igb_uio":
> + self.dut.send_expect("modprobe uio", "#", 10)
> + out = self.dut.send_expect("lsmod | grep igb_uio", "#")
> + if "igb_uio" in out:
> + self.dut.send_expect("rmmod -f igb_uio", "#", 10)
> + self.dut.send_expect("insmod ./" + self.target +
> + "/kmod/igb_uio.ko", "#", 10)
> +
> + out = self.dut.send_expect("lsmod | grep igb_uio", "#")
> + assert ("igb_uio" in out), "Failed to insmod igb_uio"
>
> def set_up(self):
> - self.setup_vm_env()
> - self.load_profile()
> + self.dut_testpmd = PmdOutput(self.dut)
> + self.used_dut_port = self.dut_ports[0]
> + tester_port = self.tester.get_local_port(self.used_dut_port)
> + self.tester_intf = self.tester.get_interface(tester_port)
> + if "vf" in self._suite_result.test_case:
> + self.insmod_modprobe("igb_uio")
> + self.bind_nic_driver(self.dut_ports,"igb_uio")
> + self.setup_vm_env()
> + self.load_profile()
> + self.vm0_testpmd.start_testpmd(
> + VM_CORES_MASK, "--port-topology=chained --txq=%s --rxq=%s"
> + % (self.VF_QUEUE, self.VF_QUEUE))
> + self.vm0_testpmd.execute_cmd('set fwd rxonly')
> + self.vm0_testpmd.execute_cmd('set verbose 1')
> + self.vm0_testpmd.execute_cmd('start')
> + else:
> + self.load_profile()
> +
>
> def search_queue_number(self, Q_strip):
> """
> @@ -91,10 +120,6 @@ class TestDdpGtp(TestCase):
> Create testing environment with VF generated from 1PF
> """
> if self.env_done is False:
> - self.bind_nic_driver(self.dut_ports[:1], driver="igb_uio")
> - self.used_dut_port = self.dut_ports[0]
> - tester_port = self.tester.get_local_port(self.used_dut_port)
> - self.tester_intf = self.tester.get_interface(tester_port)
> self.dut.generate_sriov_vfs_by_port(
> self.used_dut_port, 1, driver=driver)
> self.sriov_vfs_port = self.dut.ports_info[ @@ -102,8 +127,6 @@ class
> TestDdpGtp(TestCase):
> for port in self.sriov_vfs_port:
> port.bind_driver(self.vf_driver)
> time.sleep(1)
> - self.dut_testpmd = PmdOutput(self.dut)
> - time.sleep(1)
> vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
> # set up VM0 ENV
> self.vm0 = QEMUKvm(self.dut, 'vm0', 'ddp_gtp') @@ -119,6 +142,7 @@
> class TestDdpGtp(TestCase):
> self.vm0_testpmd = PmdOutput(self.vm0_dut)
> self.env_done = True
>
> +
> def destroy_vm_env(self):
>
> if getattr(self, 'vm0', None):
> @@ -146,9 +170,7 @@ class TestDdpGtp(TestCase):
> "Default", "--pkt-filter-mode=perfect --port-topology=chained \
> --txq=%s --rxq=%s"
> % (self.PF_QUEUE, self.PF_QUEUE))
> - self.vm0_testpmd.start_testpmd(
> - VM_CORES_MASK, "--port-topology=chained --txq=%s --rxq=%s"
> - % (self.VF_QUEUE, self.VF_QUEUE))
> +
> self.dut_testpmd.execute_cmd('port stop all')
> time.sleep(1)
> out = self.dut_testpmd.execute_cmd('ddp get list 0') @@ -161,9 +183,9
> @@ class TestDdpGtp(TestCase):
> self.dut_testpmd.execute_cmd('set fwd rxonly')
> self.dut_testpmd.execute_cmd('set verbose 1')
> self.dut_testpmd.execute_cmd('start')
> - self.vm0_testpmd.execute_cmd('set fwd rxonly')
> - self.vm0_testpmd.execute_cmd('set verbose 1')
> - self.vm0_testpmd.execute_cmd('start')
> + time.sleep(2)
> +
> +
>
> def gtp_packets(
> self, type='fdir', tunnel_pkt='gtpu', inner_L3='ipv4', @@ -409,7 +431,10
> @@ class TestDdpGtp(TestCase):
> type='clfter', port='vf id 0', tunnel_pkt='gtpu', inner_L3='ipv6')
>
> def tear_down(self):
> - self.vm0_testpmd.execute_cmd('stop')
> + if "vf" in self._suite_result.test_case:
> + self.destroy_vm_env()
> + self.vm0_testpmd.execute_cmd('stop')
> + self.vm0_testpmd.quit()
> self.dut_testpmd.execute_cmd('stop')
> out = self.dut_testpmd.execute_cmd('ddp get list 0')
> if "Profile number is: 0" not in out:
> @@ -420,8 +445,10 @@ class TestDdpGtp(TestCase):
> self.verify("Profile number is: 0" in out,
> "Failed to delete ddp profile!!!")
> self.dut_testpmd.execute_cmd('port start all')
> - self.vm0_testpmd.quit()
> self.dut_testpmd.quit()
>
> +
> def tear_down_all(self):
> - self.destroy_vm_env()
> + if self.env_done:
> + self.destroy_vm_env()
> +
> --
> 1.8.3.1
prev parent reply other threads:[~2020-07-20 6:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-03 3:25 xizhan4x
2020-07-03 3:30 ` Xie, WeiX
2020-07-24 2:29 ` Tu, Lijuan
2020-07-20 6:55 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC82132@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=xix.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).