From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: Owen Hilyard <ohilyard@iol.unh.edu>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
"matan@mellanox.com" <matan@mellanox.com>,
"stephen@networkplumber.org" <stephen@networkplumber.org>,
"jerinj@marvell.com" <jerinj@marvell.com>,
"suanmingm@mellanox.com" <suanmingm@mellanox.com>,
"thomas@monjalon.net" <thomas@monjalon.net>,
"lylavoie@iol.unh.edu" <lylavoie@iol.unh.edu>
Subject: Re: [dts] [PATCH] mac_filter: Add multicast filtering test case
Date: Fri, 24 Jul 2020 02:34:53 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC84088@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200720143803.212272-1-ohilyard@iol.unh.edu>
Applied with comment changed.
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Owen Hilyard
> Sent: 2020年7月20日 22:38
> To: dts@dpdk.org
> Cc: Zhang, Qi Z <qi.z.zhang@intel.com>; matan@mellanox.com;
> stephen@networkplumber.org; jerinj@marvell.com;
> suanmingm@mellanox.com; ohilyard@iol.unh.edu; thomas@monjalon.net;
> lylavoie@iol.unh.edu
> Subject: [dts] [PATCH] mac_filter: Add multicast filtering test case
>
> Sorry about sending this twice, I noticed after todays meeting that this was
> caught in the moderator queue and I want to get it out to the mailing list at
> large asap.
>
> add multicast filtering test case
> add multicast test case test plan
>
> Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
> ---
> test_plans/mac_filter_test_plan.rst | 27 ++++++++++++++++++++
> tests/TestSuite_mac_filter.py | 39 ++++++++++++++++++++++++++---
> 2 files changed, 62 insertions(+), 4 deletions(-)
>
> diff --git a/test_plans/mac_filter_test_plan.rst
> b/test_plans/mac_filter_test_plan.rst
> index 1335e9f..e8a4f66 100644
> --- a/test_plans/mac_filter_test_plan.rst
> +++ b/test_plans/mac_filter_test_plan.rst
> @@ -172,3 +172,30 @@ Add one more different address::
> testpmd> mac_addr add 0 <A+n+1>
>
> Verify that the response is "No space left on device" (-ENOSPC)
> +
> +Test Case: Multicast Filter
> +===========================
> +
> +Initialize first port without ``promiscuous mode``::
> +
> + testpmd> set promisc 0 off
> +
> +
> +Add the multicast MAC address to the multicast filter::
> +
> + testpmd> mcast_addr add 0 01:00:5E:00:00:00
> +
> +Send a packet with multicast destination MAC address to port 0::
> +
> + port 0/queue 0: received 1 packets
> + src=52:00:00:00:00:00 - dst=01:00:5E:00:00:00 - type=0x0800 - length=60 -
> nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw
> ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive
> queue=0x0
> + ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD
> + PKT_RX_OUTER_L4_CKSUM_UNKNOWN
> +
> +
> +Remove the multicast MAC address from the multicast filter::
> +
> + testpmd> mcast_addr remove 0 01:00:5E:00:00:00
> +
> +Send a packet with multicast destination MAC address to port 0
> +
> +Verify that the packet was not received (Check for "received" in the output).
> There will be no output if the nic responds properly.
> \ No newline at end of file
> diff --git a/tests/TestSuite_mac_filter.py b/tests/TestSuite_mac_filter.py index
> 9912d23..b762c91 100644
> --- a/tests/TestSuite_mac_filter.py
> +++ b/tests/TestSuite_mac_filter.py
> @@ -82,14 +82,18 @@ class TestMacFilter(TestCase):
> """
> pass
>
> - def whitelist_send_packet(self, portid, destMac="00:11:22:33:44:55"):
> + def whitelist_send_packet(self, portid, destMac="00:11:22:33:44:55",
> count=-1):
> """
> Send 1 packet to portid.
> """
> + # You can't have an optional parameter use a class attribute as it's default
> value
> + if count == -1:
> + count = self.frames_to_send
> +
> itf = self.tester.get_interface(self.tester.get_local_port(portid))
> pkt = Packet(pkt_type='UDP')
> pkt.config_layer('ether', {'src': '52:00:00:00:00:00', 'dst': destMac})
> - pkt.send_pkt(self.tester, tx_port=itf, count=4)
> + pkt.send_pkt(self.tester, tx_port=itf, count=count)
>
> def test_add_remove_mac_address(self):
> """
> @@ -119,7 +123,7 @@ class TestMacFilter(TestCase):
> out = self.dut.get_session_output()
> # check the packet DO NOT increase
> self.verify("received" not in out,
> - "Packet has been received on a new MAC address that has not been
> added yet")
> + "Packet has been received on a new MAC address that
> + has been removed from the port")
>
> # add the different MAC address
> self.dut.send_expect("mac_addr add %d" % portid + " %s" %
> fake_mac_addr, "testpmd>") @@ -128,7 +132,7 @@ class
> TestMacFilter(TestCase):
> out = self.dut.get_session_output()
> cur_rxpkt = utils.regexp(out, "received ([0-9]+) packets")
> # check the packet increase
> - self.verify(int(cur_rxpkt)*self.frames_to_send == self.frames_to_send,
> + self.verify(int(cur_rxpkt) * self.frames_to_send ==
> + self.frames_to_send,
> "Packet has not been received on a new MAC address that has been
> added to the port")
>
> # remove the fake MAC address
> @@ -176,6 +180,33 @@ class TestMacFilter(TestCase):
>
> self.verify("No space left on device" in out, "added 1 address more than
> max MAC addresses")
>
> + def test_multicast_filter(self):
> + """
> + Add mac address and check packet can received
> + Remove mac address and check packet can't received
> + """
> + # initialise first port without promiscuous mode
> + mcast_addr = "01:00:5E:00:00:00"
> + portid = self.dutPorts[0]
> + self.dut.send_expect(f"set promisc {portid:d} off", "testpmd> ")
> + self.dut.send_expect("clear port stats all", "testpmd> ")
> +
> + self.dut.send_expect(f"mcast_addr add {portid:d} {mcast_addr}",
> "testpmd>")
> + self.whitelist_send_packet(portid, mcast_addr, count=1)
> + time.sleep(1)
> + out = self.dut.get_session_output()
> + self.verify("received" in out,
> + "Packet has not been received when it should have
> + on a broadcast address")
> +
> + self.dut.send_expect(f"mcast_addr remove {portid:d} {mcast_addr}",
> "testpmd>")
> + self.whitelist_send_packet(portid, mcast_addr, count=1)
> + time.sleep(1)
> + out = self.dut.get_session_output()
> + self.verify("received" not in out,
> + "Packet has been received when it should have
> + ignored the broadcast")
> +
> + self.dut.send_expect("stop", "testpmd> ")
> +
> def tear_down(self):
> """
> Run after each test case.
> --
> 2.25.1
prev parent reply other threads:[~2020-07-24 2:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 19:42 Owen Hilyard
[not found] ` <20200716124853.2ccfc954@hermes.lan>
2020-07-17 13:37 ` Owen Hilyard
2020-07-20 14:38 ` Owen Hilyard
2020-07-24 2:34 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC84088@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=jerinj@marvell.com \
--cc=lylavoie@iol.unh.edu \
--cc=matan@mellanox.com \
--cc=ohilyard@iol.unh.edu \
--cc=qi.z.zhang@intel.com \
--cc=stephen@networkplumber.org \
--cc=suanmingm@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).