From: "Yao, BingX Y" <bingx.y.yao@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V1] add suite qos meter
Date: Wed, 8 Jan 2020 08:25:46 +0000 [thread overview]
Message-ID: <95BCD24840F32441BEA74E0F8A31839E062C315F@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1578472076-145296-1-git-send-email-bingx.y.yao@intel.com>
[-- Attachment #1: Type: text/plain, Size: 8013 bytes --]
Tested-by: Yao, BingX Y <bingx.y.yao@intel.com>
-----Original Message-----
From: Yao, BingX Y
Sent: Wednesday, January 8, 2020 4:28 PM
To: dts@dpdk.org
Cc: Yao, BingX Y <bingx.y.yao@intel.com>
Subject: [dts][PATCH V1] add suite qos meter
add suite
Signed-off-by: yaobing <bingx.y.yao@intel.com>
---
tests/TestSuite_qos_meter.py | 159 +++++++++++++++++++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 tests/TestSuite_qos_meter.py
diff --git a/tests/TestSuite_qos_meter.py b/tests/TestSuite_qos_meter.py new file mode 100644 index 0000000..aa38936
--- /dev/null
+++ b/tests/TestSuite_qos_meter.py
@@ -0,0 +1,159 @@
+# BSD LICENSE
+#
+# Copyright(c) <2011-2019> Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Test QOS API in DPDK.
+The DUT must have two 10G Ethernet ports connected to two ports of IXIA.
+"""
+import os
+from test_case import TestCase
+from settings import HEADER_SIZE
+from pktgen import PacketGeneratorHelper
+
+
+class TestQosMeter(TestCase):
+
+ def set_up_all(self):
+ """
+ ip_fragmentation Prerequisites
+ """
+
+ # Based on h/w type, choose how many ports to use
+ ports = self.dut.get_ports()
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.rx_port = self.tester.get_local_port(self.dut_ports[1])
+
+ # Verify that enough ports are available
+ self.verify(len(ports) >= 2, "Insufficient ports for testing")
+ self.output_path = '/tmp'
+ out = self.tester.send_expect('ls -d %s' % self.output_path, '# ')
+ if 'No such file or directory' in out:
+ self.tester.send_expect('mkdir -p %s' % self.output_path, '# ')
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def build_app_and_send_package(self):
+ """
+ Build app and send pkt
+ Return bps and pps
+ """
+
+ self.dut.send_expect('rm -rf ./examples/qos_meter/build',"#")
+ out = self.dut.build_dpdk_apps("./examples/qos_meter")
+ self.verify("Error" not in out, "Compilation error")
+ self.verify("No such" not in out, "Compilation error")
+ self.dut.send_expect('./examples/qos_meter/build/qos_meter --file-prefix=qos_meter -c 1 -n 4 -- -p 0x3 ', "TX = 1")
+ payload_size = 64 - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ pcap = os.sep.join([self.output_path, "tester.pcap"])
+ flow = 'Ether()/IP()/Raw("x"*%s)' % payload_size
+ self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, flow))
+ self.tester.scapy_execute()
+
+ tgenInput = []
+ tgenInput.append([self.tx_port, self.rx_port, pcap])
+ tgenInput.append([self.rx_port, self.tx_port, pcap])
+
+ self.tester.scapy_execute()
+ self.tester.pktgen.clear_streams()
+ streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 1388000, None, self.tester.pktgen)
+ bps, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
+ self.dut.send_expect('^C', '#')
+ return bps,pps
+
+ def test_perf_srTCM_blind_RED(self):
+ """
+ srTCM blind red
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps,pps = self.build_app_and_send_package()
+ difference_value = pps - 13880000
+ self.verify(-1388000 < difference_value <1388000,"throughput
+ validation failure")
+
+ def test_perf_srTCM_blind_GREEN(self):
+ """
+ srTCM blind GREEN
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/3/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps, pps= self.build_app_and_send_package()
+ difference_value = pps - 14880000
+ self.verify(-1488000 < difference_value <1488000,"throughput
+ validation failure")
+
+ def test_perf_srTCM_aware_RED(self):
+ """
+ srTCM aware RED
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_AWARE/2' ./examples/qos_meter/main.c", "#")
+ bps, pps= self.build_app_and_send_package()
+ difference_value = pps - 14880000
+ self.verify(-1488000 < difference_value <1488000,"throughput
+ validation failure")
+
+ def test_perf_trTCM_blind(self):
+ """
+ trTCM blind
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_TRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps, pps = self.build_app_and_send_package()
+ difference_value = pps - 13880000
+ self.verify(-1388000 < difference_value <1388000,"throughput
+ validation failure")
+
+ def test_perf_trTCM_aware(self):
+ """
+ trTCM aware
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_TRTCM_COLOR_AWARE/2' ./examples/qos_meter/main.c", "#")
+ bps, pps = self.build_app_and_send_package()
+ difference_value = pps - 14880000
+ self.verify(-1488000 < difference_value <1488000,"throughput
+ validation failure")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect('^C', '#')
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.send_expect('^C', '#')
--
2.17.2
[-- Attachment #2: TestQosMeter.log --]
[-- Type: application/octet-stream, Size: 68608 bytes --]
prev parent reply other threads:[~2020-01-08 8:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 8:27 yaobing
2020-01-08 8:24 ` Peng, Yuan
2020-01-08 8:25 ` Yao, BingX Y [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=95BCD24840F32441BEA74E0F8A31839E062C315F@SHSMSX101.ccr.corp.intel.com \
--to=bingx.y.yao@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).