* [dts] [PATCH V1] tests/vf_offload : enable hw vlan @ 2018-02-02 2:47 zhao,meijuan 2018-02-02 3:00 ` Liu, Yong 0 siblings, 1 reply; 4+ messages in thread From: zhao,meijuan @ 2018-02-02 2:47 UTC (permalink / raw) To: dts; +Cc: zhao,meijuan need enable hw vlan when setup testpmd, you can refer to dpdk commit 8b9bd0ef Signed-off-by: zhao,meijuan <meijuanx.zhao@intel.com> --- tests/TestSuite_vf_offload.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tests/TestSuite_vf_offload.py b/tests/TestSuite_vf_offload.py index c1983ca..dbae6f9 100644 --- a/tests/TestSuite_vf_offload.py +++ b/tests/TestSuite_vf_offload.py @@ -208,7 +208,7 @@ class TestVfOffload(TestCase): verify forwarded packets have correct checksum """ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % - (self.portMask) + "--disable-hw-vlan --enable-rx-cksum " + "" + + (self.portMask) + "--enable-hw-vlan --enable-rx-cksum " + "" + "--port-topology=loop") self.vm0_testpmd.execute_cmd('set fwd csum') @@ -258,7 +258,7 @@ class TestVfOffload(TestCase): """ self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % - (self.portMask) + "--disable-hw-vlan --enable-rx-cksum " + + (self.portMask) + "--enable-hw-vlan --enable-rx-cksum " + "--port-topology=loop") self.vm0_testpmd.execute_cmd('set fwd csum') -- 1.9.3 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/vf_offload : enable hw vlan 2018-02-02 2:47 [dts] [PATCH V1] tests/vf_offload : enable hw vlan zhao,meijuan @ 2018-02-02 3:00 ` Liu, Yong 2018-02-02 3:09 ` Zhao, MeijuanX 0 siblings, 1 reply; 4+ messages in thread From: Liu, Yong @ 2018-02-02 3:00 UTC (permalink / raw) To: Zhao, MeijuanX, dts; +Cc: Zhao, MeijuanX Meijuan, Why change the default setting for RX VLAN offloading? Previous setting is disable and why you enabled it? Thanks, Marvin > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhao,meijuan > Sent: Friday, February 02, 2018 10:47 AM > To: dts@dpdk.org > Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com> > Subject: [dts] [PATCH V1] tests/vf_offload : enable hw vlan > > need enable hw vlan when setup testpmd, > you can refer to dpdk commit 8b9bd0ef > > Signed-off-by: zhao,meijuan <meijuanx.zhao@intel.com> > --- > tests/TestSuite_vf_offload.py | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/tests/TestSuite_vf_offload.py b/tests/TestSuite_vf_offload.py > index c1983ca..dbae6f9 100644 > --- a/tests/TestSuite_vf_offload.py > +++ b/tests/TestSuite_vf_offload.py > @@ -208,7 +208,7 @@ class TestVfOffload(TestCase): > verify forwarded packets have correct checksum > """ > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > - (self.portMask) + "--disable-hw- > vlan --enable-rx-cksum " + "" + > + (self.portMask) + "--enable-hw-vlan > --enable-rx-cksum " + "" + > "--port-topology=loop") > self.vm0_testpmd.execute_cmd('set fwd csum') > > @@ -258,7 +258,7 @@ class TestVfOffload(TestCase): > """ > > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > - (self.portMask) + "--disable-hw- > vlan --enable-rx-cksum " + > + (self.portMask) + "--enable-hw-vlan > --enable-rx-cksum " + > "--port-topology=loop") > self.vm0_testpmd.execute_cmd('set fwd csum') > > -- > 1.9.3 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/vf_offload : enable hw vlan 2018-02-02 3:00 ` Liu, Yong @ 2018-02-02 3:09 ` Zhao, MeijuanX 2018-02-02 3:41 ` Liu, Yong 0 siblings, 1 reply; 4+ messages in thread From: Zhao, MeijuanX @ 2018-02-02 3:09 UTC (permalink / raw) To: Liu, Yong, dts on the basis of yao lei's email yesterday : 1. In previous, testpmd will enable DEV_RX_OFFLOAD_VLAN_FILTER and DEV_RX_OFFLOAD_VLAN_STRIP by default. Now, they are default off. We need declare them in the testpmd parameter by adding: --enable-hw-vlan-filter --enable-hw-vlan-strip 2. Following four testpmd parameter are dropped now because the vlan rx offload are default off. --disable-hw-vlan --disable-hw-vlan-filter --disable-hw-vlan-strip --disable-hw-vlan-extend Instead, four new parameter are added. --enable-hw-vlan --enable-hw-vlan-filter --enable-hw-vlan-strip --enable-hw-vlan-extend -----Original Message----- From: Liu, Yong Sent: Friday, February 2, 2018 11:01 AM To: Zhao, MeijuanX <meijuanx.zhao@intel.com>; dts@dpdk.org Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com> Subject: RE: [dts] [PATCH V1] tests/vf_offload : enable hw vlan Meijuan, Why change the default setting for RX VLAN offloading? Previous setting is disable and why you enabled it? Thanks, Marvin > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhao,meijuan > Sent: Friday, February 02, 2018 10:47 AM > To: dts@dpdk.org > Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com> > Subject: [dts] [PATCH V1] tests/vf_offload : enable hw vlan > > need enable hw vlan when setup testpmd, you can refer to dpdk commit > 8b9bd0ef > > Signed-off-by: zhao,meijuan <meijuanx.zhao@intel.com> > --- > tests/TestSuite_vf_offload.py | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/tests/TestSuite_vf_offload.py > b/tests/TestSuite_vf_offload.py index c1983ca..dbae6f9 100644 > --- a/tests/TestSuite_vf_offload.py > +++ b/tests/TestSuite_vf_offload.py > @@ -208,7 +208,7 @@ class TestVfOffload(TestCase): > verify forwarded packets have correct checksum > """ > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > - (self.portMask) + "--disable-hw- > vlan --enable-rx-cksum " + "" + > + (self.portMask) + > + "--enable-hw-vlan > --enable-rx-cksum " + "" + > "--port-topology=loop") > self.vm0_testpmd.execute_cmd('set fwd csum') > > @@ -258,7 +258,7 @@ class TestVfOffload(TestCase): > """ > > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > - (self.portMask) + "--disable-hw- > vlan --enable-rx-cksum " + > + (self.portMask) + > + "--enable-hw-vlan > --enable-rx-cksum " + > "--port-topology=loop") > self.vm0_testpmd.execute_cmd('set fwd csum') > > -- > 1.9.3 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/vf_offload : enable hw vlan 2018-02-02 3:09 ` Zhao, MeijuanX @ 2018-02-02 3:41 ` Liu, Yong 0 siblings, 0 replies; 4+ messages in thread From: Liu, Yong @ 2018-02-02 3:41 UTC (permalink / raw) To: Zhao, MeijuanX, dts Meijuan, I understood that testpmd default Rx offload setting has been changed. My question is that previous Rx vlan offloading is disable for the case, and now why you changed it to enabled by parameter "enable-hw-vlan" ? Thanks, Marvin > -----Original Message----- > From: Zhao, MeijuanX > Sent: Friday, February 02, 2018 11:10 AM > To: Liu, Yong <yong.liu@intel.com>; dts@dpdk.org > Subject: RE: [dts] [PATCH V1] tests/vf_offload : enable hw vlan > > on the basis of yao lei's email yesterday : > > 1. > In previous, testpmd will enable DEV_RX_OFFLOAD_VLAN_FILTER and > DEV_RX_OFFLOAD_VLAN_STRIP by default. > Now, they are default off. We need declare them in the testpmd parameter > by adding: > --enable-hw-vlan-filter > --enable-hw-vlan-strip > > 2. Following four testpmd parameter are dropped now because the vlan rx > offload are default off. > --disable-hw-vlan > --disable-hw-vlan-filter > --disable-hw-vlan-strip > --disable-hw-vlan-extend > > Instead, four new parameter are added. > --enable-hw-vlan > --enable-hw-vlan-filter > --enable-hw-vlan-strip > --enable-hw-vlan-extend > > -----Original Message----- > From: Liu, Yong > Sent: Friday, February 2, 2018 11:01 AM > To: Zhao, MeijuanX <meijuanx.zhao@intel.com>; dts@dpdk.org > Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com> > Subject: RE: [dts] [PATCH V1] tests/vf_offload : enable hw vlan > > Meijuan, > Why change the default setting for RX VLAN offloading? Previous setting is > disable and why you enabled it? > > Thanks, > Marvin > > > -----Original Message----- > > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhao,meijuan > > Sent: Friday, February 02, 2018 10:47 AM > > To: dts@dpdk.org > > Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com> > > Subject: [dts] [PATCH V1] tests/vf_offload : enable hw vlan > > > > need enable hw vlan when setup testpmd, you can refer to dpdk commit > > 8b9bd0ef > > > > Signed-off-by: zhao,meijuan <meijuanx.zhao@intel.com> > > --- > > tests/TestSuite_vf_offload.py | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/tests/TestSuite_vf_offload.py > > b/tests/TestSuite_vf_offload.py index c1983ca..dbae6f9 100644 > > --- a/tests/TestSuite_vf_offload.py > > +++ b/tests/TestSuite_vf_offload.py > > @@ -208,7 +208,7 @@ class TestVfOffload(TestCase): > > verify forwarded packets have correct checksum > > """ > > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > > - (self.portMask) + "--disable-hw- > > vlan --enable-rx-cksum " + "" + > > + (self.portMask) + > > + "--enable-hw-vlan > > --enable-rx-cksum " + "" + > > "--port-topology=loop") > > self.vm0_testpmd.execute_cmd('set fwd csum') > > > > @@ -258,7 +258,7 @@ class TestVfOffload(TestCase): > > """ > > > > self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " % > > - (self.portMask) + "--disable-hw- > > vlan --enable-rx-cksum " + > > + (self.portMask) + > > + "--enable-hw-vlan > > --enable-rx-cksum " + > > "--port-topology=loop") > > self.vm0_testpmd.execute_cmd('set fwd csum') > > > > -- > > 1.9.3 ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-02-02 3:41 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-02-02 2:47 [dts] [PATCH V1] tests/vf_offload : enable hw vlan zhao,meijuan 2018-02-02 3:00 ` Liu, Yong 2018-02-02 3:09 ` Zhao, MeijuanX 2018-02-02 3:41 ` Liu, Yong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).