Re: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test

["Chen, Zhaoyan" <zhaoyan.chen@intel.com>]

Acked-by: Zhaoyan Chen<zhaoyan.chen@intel.com>



Regards,
Zhaoyan Chen

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Wednesday, May 15, 2019 2:10 AM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test
> 
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
>  .../virtio_unit_cryptodev_func_test_plan.rst       | 125 +++++++++++++++++++++
>  1 file changed, 125 insertions(+)
>  create mode 100644 test_plans/virtio_unit_cryptodev_func_test_plan.rst
> 
> diff --git a/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..3615cb2
> --- /dev/null
> +++ b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> @@ -0,0 +1,125 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===========================
> +CryptoDev virtio unit Tests
> +===========================
> +
> +Description
> +===========
> +
> +This document provides the plan for testing Cryptodev virtio API via Cryptodev
> unit tests.
> +Unit tests include supported Hardware and Software PMD(polling mode device)
> and supported algorithms.
> +
> +This test suite will run all cryptodev virtio related unit test cases.
> +Alternatively, you could execute the unit tests manually by app/test DPDK
> application.
> +
> +Unit Test List
> +==============
> +
> +- cryptodev_virtio_autotest
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> +
> +./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install
> +
> +the bin is in /root/qemu-2.12 folder, which is your specified
> +
> +Test Case Setup
> +===============
> +
> +    +--------------+
> +    |  +--------+  |
> +    |  |   VM   |  |
> +    |  +--------+  |
> +    |              |
> +    |     HOST     |
> +    +--------------+
> +
> +In Host:
> +
> +# Build DPDK and vhost_crypto app
> +
> +      enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> +      make install -j T=x86_64-native-linuxapp-gcc
> +      make -C examples/vhost_crypto
> +
> +# Run the dpdk vhost sample
> +
> +      ./examples/vhost_crypto/build/vhost-crypto --file-prefix="vhost_crypto_1"
> +          [EAL options]
> +          [Cryptodev PMD]
> +          -- --cdev-queue-id 0
> +          --socket-file THE PATH OF SOCKET FILE
> +
> +# bind vfio-pci
> +
> +      usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0
> + 0000:60:00.1
> +
> +# Start VM by the qemu
> +
> +      taskset -c 11,12,13,14 /root/qemu-2.12/bin/qemu-system-x86_64  -name vm0
> +          -enable-kvm -pidfile /tmp/.vm0.pid
> +          -cpu host -smp 4
> +          -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> +          -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> +          -device virtio-serial
> +          -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> +          -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> +          -vnc :1
> +          -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-crypto-
> pci,id=crypto0,cryptodev=cryptodev0
> +          -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-crypto-
> pci,id=crypto1,cryptodev=cryptodev1
> +          -drive file=/root/VMs/virtio_crypto_test_710_1.img
> +          -device vfio-pci,host=0000:60:00.0,id=pt_0
> +          -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +
> +# set virtio device
> +
> +      modprobe uio_pci_generic
> +      echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> +      echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> +      echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Build the guest DPDK and app/test
> +
> +# Manually verify the app/test by this command, as example, in your build folder:
> +
> +      ./app/test -c 1 -n 1
> +      RTE>> cryptodev_virtio_autotest
> +
> +Expected all tests could pass in testing.
> --
> 2.7.4