* [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route
@ 2019-09-04 13:59 hanyingya
2019-09-20 6:55 ` Chen, Zhaoyan
2019-09-20 6:56 ` Tu, Lijuan
0 siblings, 2 replies; 3+ messages in thread
From: hanyingya @ 2019-09-04 13:59 UTC (permalink / raw)
To: dts; +Cc: hanyingya
As DPDK changed l3fwd default route in commit:37afe381bde4277,
here we take the default route in l3fwd instead of the old one in DTS.
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
tests/TestSuite_l3fwd.py | 104 ++++++++++-----------------------------
1 file changed, 27 insertions(+), 77 deletions(-)
diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
index afac1c8..aaac8d8 100644
--- a/tests/TestSuite_l3fwd.py
+++ b/tests/TestSuite_l3fwd.py
@@ -48,62 +48,18 @@ class TestL3fwd(TestCase):
path = "./examples/l3fwd/build/"
cmdline_2_ports = {
- "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})'",
- "1S/1C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1})'",
- "1S/2C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})'",
- "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
+ "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})'",
+ "1S/1C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1})'",
+ "1S/2C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})'",
+ "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
cmdline_4_ports = {
- "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
- "1S/2C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
- "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
- "1S/8C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
+ "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
+ "1S/2C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
+ "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
+ "1S/8C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
(P0,1,C{1.5.0}), (P1,1,C{1.6.0}), (P2,1,C{1.7.0}), (P3,1,C{1,8,0})'"}
- ipv4_em_table = [
- "{{IPv4(10,100,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
- "{{IPv4(10,101,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
- "{{IPv4(11,100,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
- "{{IPv4(11,101,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
- "{{IPv4(12,100,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
- "{{IPv4(12,101,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
- "{{IPv4(13,100,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
- "{{IPv4(13,101,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
- ]
-
- ipv4_lpm_table = [
- "{IPv4(10,100,0,0), 24, P0}",
- "{IPv4(10,101,0,0), 24, P0}",
- "{IPv4(11,100,0,0), 24, P1}",
- "{IPv4(11,101,0,0), 24, P1}",
- "{IPv4(12,100,0,0), 24, P2}",
- "{IPv4(12,101,0,0), 24, P2}",
- "{IPv4(13,100,0,0), 24, P3}",
- "{IPv4(13,101,0,0), 24, P3}",
- ]
-
- ipv6_em_table = [
- "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
- "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
- "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
- "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
- "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
- "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
- "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
- "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
- ]
-
- ipv6_lpm_table = [
- "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P0}",
- "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P0}",
- "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P1}",
- "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P1}",
- "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P2}",
- "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P2}",
- "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P3}",
- "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05}, 64,P3}",
- ]
-
def set_up_all(self):
"""
Run at the start of each test suite.
@@ -136,8 +92,6 @@ class TestL3fwd(TestCase):
+ "define RTE_TEST_RX_DESC_DEFAULT 2048/' ./examples/l3fwd/main.c", "#", 20)
self.dut.send_expect("sed -i -e 's/define RTE_TEST_TX_DESC_DEFAULT.*$/"
+ "define RTE_TEST_TX_DESC_DEFAULT 2048/' ./examples/l3fwd/main.c", "#", 20)
- self.method_table = {"ipv4_l3fwd_lpm": TestL3fwd.ipv4_lpm_table, "ipv4_l3fwd_em": TestL3fwd.ipv4_em_table,
- "ipv6_l3fwd_lpm": TestL3fwd.ipv6_lpm_table, "ipv6_l3fwd_em": TestL3fwd.ipv6_em_table}
self.pat = re.compile("P([0123])")
self.test_results = {'header': [], 'data': []}
@@ -174,13 +128,6 @@ class TestL3fwd(TestCase):
Prepare long prefix match table, replace P(x) port pattern
"""
l3fwd_method = l3_proto + "_l3fwd_" + mode
- l3fwdStr = "static struct %s_route %s_route_array[] = {\\\n" % (l3fwd_method, l3fwd_method)
- for idx in range(len(self.method_table[l3fwd_method])):
- self.method_table[l3fwd_method][idx] = self.pat.sub(self.portRepl, self.method_table[l3fwd_method][idx])
- l3fwdStr = l3fwdStr + '' * 4 + self.method_table[l3fwd_method][idx] + ",\\\n"
- l3fwdStr = l3fwdStr + "};"
- self.dut.send_expect(r"sed -i '/%s_route_array\[\].*{/,/^\}\;/c\\%s' examples/l3fwd/l3fwd_%s.c"
- % (l3fwd_method, l3fwdStr, mode), "# ")
self.dut.send_expect("make clean -C examples/l3fwd", "# ")
if "lpm" in l3fwd_method:
out = self.dut.build_dpdk_apps("./examples/l3fwd", "USER_FLAGS=-DAPP_LOOKUP_METHOD=1")
@@ -256,10 +203,7 @@ class TestL3fwd(TestCase):
if l3_proto == 'ipv4':
payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] - HEADER_SIZE['udp']
else:
- # l3_proto == 'ipv6'
payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6'] - HEADER_SIZE['udp']
- if frame_size == 64:
- payload_size = frame_size + 2 - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6'] - HEADER_SIZE['udp']
pcaps = {}
for _port in valports:
@@ -313,12 +257,20 @@ class TestL3fwd(TestCase):
# perpare commandline and core mask
rtCmdLines, core_mask = self.perpare_commandline(len(valports))
- for cores in rtCmdLines.keys():
- # Start L3fwd appliction
- command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto + "_l3fwd_" + mode, core_mask[cores],
- self.dut.get_memory_channels(), utils.create_mask(valports))
- self.dut.send_expect(command_line, "L3FWD:", 120)
- for frame_size in self.frame_sizes:
+ for frame_size in self.frame_sizes:
+ if l3_proto == "ipv6" and frame_size == 64:
+ frame_size += 2
+ for cores in rtCmdLines.keys():
+ # Start L3fwd appliction
+ command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto + "_l3fwd_" + mode, core_mask[cores],
+ self.dut.get_memory_channels(), utils.create_mask(valports))
+ if self.nic == "niantic":
+ command_line += " --parse-ptype"
+ if frame_size > 1518:
+ command_line += " --enable-jumbo --max-pkt-len %d" % frame_size
+ self.dut.send_expect(command_line, "L3FWD:", 120)
+ self.logger.info("Executing l3fwd using %s mode, %d ports, %s and %d frame size"
+ % (mode, len(valports), cores, frame_size))
# crete traffic flow
pcaps = self.create_pcap_file(frame_size, l3_proto)
# send the traffic and Measure test
@@ -337,14 +289,12 @@ class TestL3fwd(TestCase):
pps /= 1000000.0
linerate = self.wirespeed(self.nic, frame_size, len(valports))
percentage = pps * 100 / linerate
- if mode == "ipv6" and frame_size == 64:
- frame_size += 2
data_row = [frame_size, mode, cores, str(pps), str(percentage)]
self.result_table_add(data_row)
self.test_results['data'].append(data_row)
- # Stop L3fwd
- self.dut.send_expect("^C", "#")
- time.sleep(1)
+ # Stop L3fwd
+ self.dut.send_expect("^C", "#")
+ time.sleep(1)
# Print result
self.result_table_print()
@@ -360,6 +310,8 @@ class TestL3fwd(TestCase):
rtCmdLines, core_mask = self.perpare_commandline(len(valports))
for frame_size in self.frame_sizes:
+ if mode == "ipv6" and frame_size == 64:
+ frame_size += 2
for cores in rtCmdLines.keys():
# in order to save time, only some of the cases will be run.
if cores in ["1S/2C/1T", "1S/4C/1T"]:
@@ -390,8 +342,6 @@ class TestL3fwd(TestCase):
# statistical result
linerate = self.wirespeed(self.nic, frame_size, len(valports))
zero_loss_throughput = (linerate * zero_loss_rate) / 100
- if mode == "ipv6" and frame_size == 64:
- frame_size += 2
data_row = [frame_size, mode, cores, str(zero_loss_throughput), str(zero_loss_rate)]
self.result_table_add(data_row)
self.test_results['data'].append(data_row)
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route
2019-09-04 13:59 [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route hanyingya
@ 2019-09-20 6:55 ` Chen, Zhaoyan
2019-09-20 6:56 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Chen, Zhaoyan @ 2019-09-20 6:55 UTC (permalink / raw)
To: Han, YingyaX, dts; +Cc: Han, YingyaX, Chen, Zhaoyan
Acked-by: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of hanyingya
> Sent: Wednesday, September 4, 2019 9:59 PM
> To: dts@dpdk.org
> Cc: Han, YingyaX <yingyax.han@intel.com>
> Subject: [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and
> remove the old route
>
> As DPDK changed l3fwd default route in commit:37afe381bde4277, here we take the
> default route in l3fwd instead of the old one in DTS.
>
> Signed-off-by: hanyingya <yingyax.han@intel.com>
> ---
> tests/TestSuite_l3fwd.py | 104 ++++++++++-----------------------------
> 1 file changed, 27 insertions(+), 77 deletions(-)
>
> diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py index
> afac1c8..aaac8d8 100644
> --- a/tests/TestSuite_l3fwd.py
> +++ b/tests/TestSuite_l3fwd.py
> @@ -48,62 +48,18 @@ class TestL3fwd(TestCase):
>
> path = "./examples/l3fwd/build/"
> cmdline_2_ports = {
> - "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0})'",
> - "1S/1C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1})'",
> - "1S/2C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0})'",
> - "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
> + "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0})'",
> + "1S/1C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1})'",
> + "1S/2C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0})'",
> + "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> + (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
>
> cmdline_4_ports = {
> - "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
> - "1S/2C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
> - "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
> - "1S/8C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
> + "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0}),
> (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
> + "1S/2C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1}),
> (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
> + "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),
> (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
> + "1S/8C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> + (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
> (P0,1,C{1.5.0}), (P1,1,C{1.6.0}), (P2,1,C{1.7.0}), (P3,1,C{1,8,0})'"}
>
> - ipv4_em_table = [
> - "{{IPv4(10,100,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
> - "{{IPv4(10,101,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
> - "{{IPv4(11,100,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
> - "{{IPv4(11,101,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
> - "{{IPv4(12,100,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
> - "{{IPv4(12,101,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
> - "{{IPv4(13,100,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
> - "{{IPv4(13,101,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
> - ]
> -
> - ipv4_lpm_table = [
> - "{IPv4(10,100,0,0), 24, P0}",
> - "{IPv4(10,101,0,0), 24, P0}",
> - "{IPv4(11,100,0,0), 24, P1}",
> - "{IPv4(11,101,0,0), 24, P1}",
> - "{IPv4(12,100,0,0), 24, P2}",
> - "{IPv4(12,101,0,0), 24, P2}",
> - "{IPv4(13,100,0,0), 24, P3}",
> - "{IPv4(13,101,0,0), 24, P3}",
> - ]
> -
> - ipv6_em_table = [
> - "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
> - "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
> - "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
> - "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
> - "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
> - "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
> - "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
> - "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1e,
> 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
> - ]
> -
> - ipv6_lpm_table = [
> - "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P0}",
> - "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P0}",
> - "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P1}",
> - "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P1}",
> - "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P2}",
> - "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P2}",
> - "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P3}",
> - "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff, 0xfe,
> 0x91, 0x38, 0x05}, 64,P3}",
> - ]
> -
> def set_up_all(self):
> """
> Run at the start of each test suite.
> @@ -136,8 +92,6 @@ class TestL3fwd(TestCase):
> + "define RTE_TEST_RX_DESC_DEFAULT
> 2048/' ./examples/l3fwd/main.c", "#", 20)
> self.dut.send_expect("sed -i -e 's/define RTE_TEST_TX_DESC_DEFAULT.*$/"
> + "define RTE_TEST_TX_DESC_DEFAULT
> 2048/' ./examples/l3fwd/main.c", "#", 20)
> - self.method_table = {"ipv4_l3fwd_lpm": TestL3fwd.ipv4_lpm_table,
> "ipv4_l3fwd_em": TestL3fwd.ipv4_em_table,
> - "ipv6_l3fwd_lpm": TestL3fwd.ipv6_lpm_table, "ipv6_l3fwd_em":
> TestL3fwd.ipv6_em_table}
>
> self.pat = re.compile("P([0123])")
> self.test_results = {'header': [], 'data': []} @@ -174,13 +128,6 @@ class
> TestL3fwd(TestCase):
> Prepare long prefix match table, replace P(x) port pattern
> """
> l3fwd_method = l3_proto + "_l3fwd_" + mode
> - l3fwdStr = "static struct %s_route %s_route_array[] = {\\\n" % (l3fwd_method,
> l3fwd_method)
> - for idx in range(len(self.method_table[l3fwd_method])):
> - self.method_table[l3fwd_method][idx] = self.pat.sub(self.portRepl,
> self.method_table[l3fwd_method][idx])
> - l3fwdStr = l3fwdStr + '' * 4 + self.method_table[l3fwd_method][idx] + ",\\\n"
> - l3fwdStr = l3fwdStr + "};"
> - self.dut.send_expect(r"sed -i '/%s_route_array\[\].*{/,/^\}\;/c\\%s'
> examples/l3fwd/l3fwd_%s.c"
> - % (l3fwd_method, l3fwdStr, mode), "# ")
> self.dut.send_expect("make clean -C examples/l3fwd", "# ")
> if "lpm" in l3fwd_method:
> out = self.dut.build_dpdk_apps("./examples/l3fwd", "USER_FLAGS=-
> DAPP_LOOKUP_METHOD=1")
> @@ -256,10 +203,7 @@ class TestL3fwd(TestCase):
> if l3_proto == 'ipv4':
> payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] -
> HEADER_SIZE['udp']
> else:
> - # l3_proto == 'ipv6'
> payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6'] -
> HEADER_SIZE['udp']
> - if frame_size == 64:
> - payload_size = frame_size + 2 - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6'] -
> HEADER_SIZE['udp']
>
> pcaps = {}
> for _port in valports:
> @@ -313,12 +257,20 @@ class TestL3fwd(TestCase):
> # perpare commandline and core mask
> rtCmdLines, core_mask = self.perpare_commandline(len(valports))
>
> - for cores in rtCmdLines.keys():
> - # Start L3fwd appliction
> - command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto + "_l3fwd_"
> + mode, core_mask[cores],
> - self.dut.get_memory_channels(),
> utils.create_mask(valports))
> - self.dut.send_expect(command_line, "L3FWD:", 120)
> - for frame_size in self.frame_sizes:
> + for frame_size in self.frame_sizes:
> + if l3_proto == "ipv6" and frame_size == 64:
> + frame_size += 2
> + for cores in rtCmdLines.keys():
> + # Start L3fwd appliction
> + command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto +
> "_l3fwd_" + mode, core_mask[cores],
> + self.dut.get_memory_channels(),
> utils.create_mask(valports))
> + if self.nic == "niantic":
> + command_line += " --parse-ptype"
> + if frame_size > 1518:
> + command_line += " --enable-jumbo --max-pkt-len %d" % frame_size
> + self.dut.send_expect(command_line, "L3FWD:", 120)
> + self.logger.info("Executing l3fwd using %s mode, %d ports, %s and %d
> frame size"
> + % (mode, len(valports), cores,
> + frame_size))
> # crete traffic flow
> pcaps = self.create_pcap_file(frame_size, l3_proto)
> # send the traffic and Measure test @@ -337,14 +289,12 @@ class
> TestL3fwd(TestCase):
> pps /= 1000000.0
> linerate = self.wirespeed(self.nic, frame_size, len(valports))
> percentage = pps * 100 / linerate
> - if mode == "ipv6" and frame_size == 64:
> - frame_size += 2
> data_row = [frame_size, mode, cores, str(pps), str(percentage)]
> self.result_table_add(data_row)
> self.test_results['data'].append(data_row)
> - # Stop L3fwd
> - self.dut.send_expect("^C", "#")
> - time.sleep(1)
> + # Stop L3fwd
> + self.dut.send_expect("^C", "#")
> + time.sleep(1)
> # Print result
> self.result_table_print()
>
> @@ -360,6 +310,8 @@ class TestL3fwd(TestCase):
> rtCmdLines, core_mask = self.perpare_commandline(len(valports))
>
> for frame_size in self.frame_sizes:
> + if mode == "ipv6" and frame_size == 64:
> + frame_size += 2
> for cores in rtCmdLines.keys():
> # in order to save time, only some of the cases will be run.
> if cores in ["1S/2C/1T", "1S/4C/1T"]:
> @@ -390,8 +342,6 @@ class TestL3fwd(TestCase):
> # statistical result
> linerate = self.wirespeed(self.nic, frame_size, len(valports))
> zero_loss_throughput = (linerate * zero_loss_rate) / 100
> - if mode == "ipv6" and frame_size == 64:
> - frame_size += 2
> data_row = [frame_size, mode, cores, str(zero_loss_throughput),
> str(zero_loss_rate)]
> self.result_table_add(data_row)
> self.test_results['data'].append(data_row)
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route
2019-09-04 13:59 [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route hanyingya
2019-09-20 6:55 ` Chen, Zhaoyan
@ 2019-09-20 6:56 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2019-09-20 6:56 UTC (permalink / raw)
To: Han, YingyaX, dts; +Cc: Han, YingyaX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of hanyingya
> Sent: Wednesday, September 4, 2019 9:59 PM
> To: dts@dpdk.org
> Cc: Han, YingyaX <yingyax.han@intel.com>
> Subject: [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error
> and remove the old route
>
> As DPDK changed l3fwd default route in commit:37afe381bde4277, here we
> take the default route in l3fwd instead of the old one in DTS.
>
> Signed-off-by: hanyingya <yingyax.han@intel.com>
> ---
> tests/TestSuite_l3fwd.py | 104 ++++++++++-----------------------------
> 1 file changed, 27 insertions(+), 77 deletions(-)
>
> diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py index
> afac1c8..aaac8d8 100644
> --- a/tests/TestSuite_l3fwd.py
> +++ b/tests/TestSuite_l3fwd.py
> @@ -48,62 +48,18 @@ class TestL3fwd(TestCase):
>
> path = "./examples/l3fwd/build/"
> cmdline_2_ports = {
> - "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0})'",
> - "1S/1C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1})'",
> - "1S/2C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0})'",
> - "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
> + "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0})'",
> + "1S/1C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1})'",
> + "1S/2C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0})'",
> + "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> + (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
>
> cmdline_4_ports = {
> - "1S/1C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
> - "1S/2C/2T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
> - "1S/4C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
> - "1S/8C/1T": "%s -c %s -n %d -- -p %s -P --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
> + "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
> + "1S/2C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
> + "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
> + "1S/8C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}),
> + (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
> (P0,1,C{1.5.0}), (P1,1,C{1.6.0}), (P2,1,C{1.7.0}), (P3,1,C{1,8,0})'"}
>
> - ipv4_em_table = [
> - "{{IPv4(10,100,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
> - "{{IPv4(10,101,0,1), IPv4(1,2,3,4), 1, 10, IPPROTO_UDP}, P0}",
> - "{{IPv4(11,100,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
> - "{{IPv4(11,101,0,1), IPv4(1,2,3,4), 1, 11, IPPROTO_UDP}, P1}",
> - "{{IPv4(12,100,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
> - "{{IPv4(12,101,0,1), IPv4(1,2,3,4), 1, 12, IPPROTO_UDP}, P2}",
> - "{{IPv4(13,100,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
> - "{{IPv4(13,101,0,1), IPv4(1,2,3,4), 1, 13, IPPROTO_UDP}, P3}",
> - ]
> -
> - ipv4_lpm_table = [
> - "{IPv4(10,100,0,0), 24, P0}",
> - "{IPv4(10,101,0,0), 24, P0}",
> - "{IPv4(11,100,0,0), 24, P1}",
> - "{IPv4(11,101,0,0), 24, P1}",
> - "{IPv4(12,100,0,0), 24, P2}",
> - "{IPv4(12,101,0,0), 24, P2}",
> - "{IPv4(13,100,0,0), 24, P3}",
> - "{IPv4(13,101,0,0), 24, P3}",
> - ]
> -
> - ipv6_em_table = [
> - "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
> - "{{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 10, IPPROTO_UDP}, P0}",
> - "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
> - "{{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 11, IPPROTO_UDP}, P1}",
> - "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
> - "{{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 12, IPPROTO_UDP}, P2}",
> - "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
> - "{{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
> 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a}, 1, 13, IPPROTO_UDP}, P3}",
> - ]
> -
> - ipv6_lpm_table = [
> - "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P0}",
> - "{{0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P0}",
> - "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P1}",
> - "{{0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P1}",
> - "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P2}",
> - "{{0x2b, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P2}",
> - "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P3}",
> - "{{0x2c, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1b, 0x21, 0xff,
> 0xfe, 0x91, 0x38, 0x05}, 64,P3}",
> - ]
> -
> def set_up_all(self):
> """
> Run at the start of each test suite.
> @@ -136,8 +92,6 @@ class TestL3fwd(TestCase):
> + "define RTE_TEST_RX_DESC_DEFAULT
> 2048/' ./examples/l3fwd/main.c", "#", 20)
> self.dut.send_expect("sed -i -e 's/define
> RTE_TEST_TX_DESC_DEFAULT.*$/"
> + "define RTE_TEST_TX_DESC_DEFAULT
> 2048/' ./examples/l3fwd/main.c", "#", 20)
> - self.method_table = {"ipv4_l3fwd_lpm": TestL3fwd.ipv4_lpm_table,
> "ipv4_l3fwd_em": TestL3fwd.ipv4_em_table,
> - "ipv6_l3fwd_lpm": TestL3fwd.ipv6_lpm_table,
> "ipv6_l3fwd_em": TestL3fwd.ipv6_em_table}
>
> self.pat = re.compile("P([0123])")
> self.test_results = {'header': [], 'data': []} @@ -174,13 +128,6 @@ class
> TestL3fwd(TestCase):
> Prepare long prefix match table, replace P(x) port pattern
> """
> l3fwd_method = l3_proto + "_l3fwd_" + mode
> - l3fwdStr = "static struct %s_route %s_route_array[] = {\\\n" %
> (l3fwd_method, l3fwd_method)
> - for idx in range(len(self.method_table[l3fwd_method])):
> - self.method_table[l3fwd_method][idx] = self.pat.sub(self.portRepl,
> self.method_table[l3fwd_method][idx])
> - l3fwdStr = l3fwdStr + '' * 4 + self.method_table[l3fwd_method][idx] +
> ",\\\n"
> - l3fwdStr = l3fwdStr + "};"
> - self.dut.send_expect(r"sed -i '/%s_route_array\[\].*{/,/^\}\;/c\\%s'
> examples/l3fwd/l3fwd_%s.c"
> - % (l3fwd_method, l3fwdStr, mode), "# ")
> self.dut.send_expect("make clean -C examples/l3fwd", "# ")
> if "lpm" in l3fwd_method:
> out = self.dut.build_dpdk_apps("./examples/l3fwd", "USER_FLAGS=-
> DAPP_LOOKUP_METHOD=1")
> @@ -256,10 +203,7 @@ class TestL3fwd(TestCase):
> if l3_proto == 'ipv4':
> payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] -
> HEADER_SIZE['udp']
> else:
> - # l3_proto == 'ipv6'
> payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6']
> - HEADER_SIZE['udp']
> - if frame_size == 64:
> - payload_size = frame_size + 2 - HEADER_SIZE['eth'] -
> HEADER_SIZE['ipv6'] - HEADER_SIZE['udp']
>
> pcaps = {}
> for _port in valports:
> @@ -313,12 +257,20 @@ class TestL3fwd(TestCase):
> # perpare commandline and core mask
> rtCmdLines, core_mask = self.perpare_commandline(len(valports))
>
> - for cores in rtCmdLines.keys():
> - # Start L3fwd appliction
> - command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto +
> "_l3fwd_" + mode, core_mask[cores],
> - self.dut.get_memory_channels(),
> utils.create_mask(valports))
> - self.dut.send_expect(command_line, "L3FWD:", 120)
> - for frame_size in self.frame_sizes:
> + for frame_size in self.frame_sizes:
> + if l3_proto == "ipv6" and frame_size == 64:
> + frame_size += 2
> + for cores in rtCmdLines.keys():
> + # Start L3fwd appliction
> + command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto
> + "_l3fwd_" + mode, core_mask[cores],
> + self.dut.get_memory_channels(),
> utils.create_mask(valports))
> + if self.nic == "niantic":
> + command_line += " --parse-ptype"
> + if frame_size > 1518:
> + command_line += " --enable-jumbo --max-pkt-len %d" %
> frame_size
> + self.dut.send_expect(command_line, "L3FWD:", 120)
> + self.logger.info("Executing l3fwd using %s mode, %d ports, %s
> and %d frame size"
> + % (mode, len(valports), cores,
> + frame_size))
> # crete traffic flow
> pcaps = self.create_pcap_file(frame_size, l3_proto)
> # send the traffic and Measure test @@ -337,14 +289,12 @@ class
> TestL3fwd(TestCase):
> pps /= 1000000.0
> linerate = self.wirespeed(self.nic, frame_size, len(valports))
> percentage = pps * 100 / linerate
> - if mode == "ipv6" and frame_size == 64:
> - frame_size += 2
> data_row = [frame_size, mode, cores, str(pps), str(percentage)]
> self.result_table_add(data_row)
> self.test_results['data'].append(data_row)
> - # Stop L3fwd
> - self.dut.send_expect("^C", "#")
> - time.sleep(1)
> + # Stop L3fwd
> + self.dut.send_expect("^C", "#")
> + time.sleep(1)
> # Print result
> self.result_table_print()
>
> @@ -360,6 +310,8 @@ class TestL3fwd(TestCase):
> rtCmdLines, core_mask = self.perpare_commandline(len(valports))
>
> for frame_size in self.frame_sizes:
> + if mode == "ipv6" and frame_size == 64:
> + frame_size += 2
> for cores in rtCmdLines.keys():
> # in order to save time, only some of the cases will be run.
> if cores in ["1S/2C/1T", "1S/4C/1T"]:
> @@ -390,8 +342,6 @@ class TestL3fwd(TestCase):
> # statistical result
> linerate = self.wirespeed(self.nic, frame_size, len(valports))
> zero_loss_throughput = (linerate * zero_loss_rate) / 100
> - if mode == "ipv6" and frame_size == 64:
> - frame_size += 2
> data_row = [frame_size, mode, cores, str(zero_loss_throughput),
> str(zero_loss_rate)]
> self.result_table_add(data_row)
> self.test_results['data'].append(data_row)
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-20 6:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-04 13:59 [dts] [PATCH V1]tests/l3fwd: fix Ipv6 66Bit linerate calculation error and remove the old route hanyingya
2019-09-20 6:55 ` Chen, Zhaoyan
2019-09-20 6:56 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).