* [dts] [PATCH V1] tests:Add new test_suite flexible rxd.
@ 2019-12-16 1:32 zhu,shuai
2019-12-26 5:48 ` Chen, Zhaoyan
0 siblings, 1 reply; 2+ messages in thread
From: zhu,shuai @ 2019-12-16 1:32 UTC (permalink / raw)
To: dts; +Cc: zhaoyan.chen, zhu,shuai
add new test_suite flexible rxd.
Signed-off-by: zhu,shuai <shuaix.zhu@intel.com>
---
tests/TestSuite_flexible_rxd.py | 302 ++++++++++++++++++++++++++++++++
1 file changed, 302 insertions(+)
create mode 100644 tests/TestSuite_flexible_rxd.py
diff --git a/tests/TestSuite_flexible_rxd.py b/tests/TestSuite_flexible_rxd.py
new file mode 100644
index 0000000..9ebd97e
--- /dev/null
+++ b/tests/TestSuite_flexible_rxd.py
@@ -0,0 +1,302 @@
+# Copyright (c) <2019> Intel Corporation
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# - Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# - Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+#
+# - Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+# OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+import time
+from test_case import TestCase
+from packet import Packet
+from pmd_output import PmdOutput
+
+TYPE = ["0x8100", "0x88A8", "0x9100"]
+
+
+class TestFlexibleRxd(TestCase):
+
+ def set_up_all(self):
+ """
+ run at the start of each test suite.
+ """
+ self.verify(self.nic in ["columbiaville_25g", "columbiaville_100g"],
+ "flexible rxd only supports CVL NIC.")
+ self.nb_core = 2
+ self.pkg_count = 1
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+ self.pci_info = self.dut.ports_info[0]['pci']
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.ports_socket)
+ self.verify(len(self.cores) >= 3, "The machine has too few cores.")
+ self.tx_interface = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
+ self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.src_mac = self.tester.get_mac(self.tester.get_local_port(self.dut_ports[0]))
+ self.pmdout = PmdOutput(self.dut)
+ self.prepare_test_pmd()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def prepare_test_pmd(self):
+ """
+ Modify the dpdk code.
+ """
+ self.dut.send_expect("cp ./app/test-pmd/util.c .", "#", 15)
+ self.dut.send_expect(
+ "sed -i '/#include <rte_flow.h>/a\#include <rte_pmd_ice.h>' app/test-pmd/util.c", "#", 15)
+ self.dut.send_expect(
+ "sed -i '/if (ol_flags & PKT_RX_TIMESTAMP)/i\ rte_net_ice_dump_proto_xtr_metadata(mb);' app/test-pmd/util.c", "#", 15)
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def restory_test_pmd(self):
+ """
+ Resume editing operation.
+ """
+ self.dut.send_expect("\cp ./util.c ./app/test-pmd/", "#", 15)
+ self.dut.send_expect("rm -rf ./util.c", "#", 15)
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def start_testpmd(self, pkg_type):
+ """
+ start testpmd
+ """
+ eal_params = self.dut.create_eal_parameters(cores=self.cores, ports=[self.pci_info],
+ port_options={self.pci_info: 'proto_xtr=%s' % pkg_type})
+ self.pmdout.execute_cmd("./%s/app/testpmd %s -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=%d" % \
+ (self.target, eal_params, self.nb_core))
+ self.pmdout.execute_cmd("set verbose 1", "testpmd> ", 120)
+ self.pmdout.execute_cmd("set fwd io", "testpmd> ", 120)
+ self.pmdout.execute_cmd("set promisc all off", "testpmd> ", 120)
+ self.pmdout.execute_cmd("clear port stats all", "testpmd> ", 120)
+ self.pmdout.execute_cmd("start", "testpmd> ", 120)
+
+ def verify_result(self, fields_list, out, mesg):
+ """
+ Validation results
+ """
+ for field in fields_list:
+ self.verify(field in out, mesg)
+ self.dut.send_expect("quit", "#", 15)
+
+ def combine_and_send_pkts(self, pkg_type, config, ether_type=None):
+ if pkg_type == 'vlan':
+ num = config['vlan_tag']
+ vlan_list = []
+ for i in range(num):
+ vlan_list.append('Dot1Q(prio=%d+1,vlan=%d+23)' % (i, i))
+ self.vlan_str = '/'.join(vlan_list)
+ pkt_str = 'Ether(src="%s", dst="%s", type=%s)/%s/IP()/UDP()/DNS()' % (self.src_mac, self.dst_mac, ether_type, self.vlan_str)
+ pkt = Packet(pkt_str)
+ else:
+ pkt = Packet(pkt_type=pkg_type, pkt_len=128)
+ pkt.config_layers(config)
+ pkt.send_pkt(self.tester, tx_port=self.tx_interface, count=self.pkg_count, timeout=30)
+ out_info = self.dut.get_session_output(timeout=3)
+ return out_info
+
+ def test_check_single_VLAN_fields_in_RXD_8021Q(self):
+ """
+ Check single VLAN fields in RXD (802.1Q)
+ """
+ self.start_testpmd('vlan')
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts('vlan', config, ether_type=TYPE[0])
+ mesg = "The packet does not carry a VLAN tag."
+ fields_list = ["vlan"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_single_VLAN_fields_in_RXD_8021ad(self):
+ """
+ Check single VLAN fields in RXD (802.1ad)
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
+ mesg = "stag result is not expected (stag=1:0:23)"
+ fields_list = ["stag=1:0:23"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021Q_1_VLAN_tag(self):
+ """
+ Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
+ mesg = "stag result is not expected (stag=1:0:23)"
+ fields_list = ["stag=1:0:23"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021Q_2_VLAN_tag(self):
+ """
+ Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 2}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
+ mesg = "There are no related fields in the received VLAN packet"
+ fields_list = ["stag=1:0:23", "ctag=2:0:24"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021ad(self):
+ """
+ Check double VLAN fields in RXD (802.1ad)
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 2}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
+ mesg = "There are no related fields in the received VLAN packet"
+ fields_list = ["stag=1:0:23", "ctag=2:0:24"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv4_fields_in_RXD(self):
+ """
+ Check IPv4 fields in RXD
+ """
+ self.start_testpmd("ipv4")
+ pkg_type = 'UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv4', {'tos': 23, 'ttl': 98})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV4 packet"
+ fields_list = ["ver=4", "hdrlen=5", "tos=23", "ttl=98", "proto=17"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv6_fields_in_RXD(self):
+ """
+ Check IPv6 fields in RXD
+ """
+ self.start_testpmd("ipv6")
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV6 packet"
+ fields_list = ["ver=6", "tc=12", "flow_hi4=0x9", "nexthdr=17", "hoplimit=34"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv6_flow_field_in_RXD(self):
+ """
+ Check IPv6 flow field in RXD
+ """
+ self.start_testpmd("ipv6_flow")
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV6_flow packet"
+ fields_list = ["ver=6", "tc=12", "flow=0x98765"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_TCP_fields_in_IPv4_in_RXD(self):
+ """
+ Check TCP fields in IPv4 in RXD
+ """
+ self.start_testpmd("tcp")
+ pkg_type = 'TCP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('tcp', {'flags': 'AS'})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received TCP packet"
+ fields_list = ["doff=5", "flags=AS"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_TCP_fields_in_IPv6_in_RXD(self):
+ """
+ Check TCP fields in IPv6 in RXD
+ """
+ self.start_testpmd("tcp")
+ pkg_type = 'IPv6_TCP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('tcp', {'flags': 'S'})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received TCP packet"
+ fields_list = ["doff=5", "flags=S"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv4_IPv6_TCP_fields_in_RXD_on_specific_queues(self):
+ """
+ Check IPv4, IPv6, TCP fields in RXD on specific queues
+ """
+ self.start_testpmd("'[(2):ipv4,(3):ipv6,(4):tcp]'")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth dst is %s / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 23 ttl is 98 / end actions queue index 2 / end" % self.dst_mac, "created")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 12 / end actions queue index 3 / end", "created")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth dst is %s / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions queue index 4 / end" % self.dst_mac, "created")
+
+ # send IPv4
+ pkg_type = 'UDP'
+ config = [('ether', {'dst': self.dst_mac}),
+ ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2', 'tos': 23, 'ttl': 98})]
+ out1 = self.combine_and_send_pkts(pkg_type, config)
+ mesg1 = "There are no relevant fields in the received IPv4 packet."
+ fields_list1 = ["Receive queue=0x2", "ver=4", "hdrlen=5", "tos=23", "ttl=98", "proto=17"]
+ for field1 in fields_list1:
+ self.verify(field1 in out1, mesg1)
+
+ # send IPv6
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'src': '2001::3', 'dst': '2001::4', 'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out2 = self.combine_and_send_pkts(pkg_type, config)
+ mesg2 = "There are no relevant fields in the received IPv6 packet."
+ fields_list2 = ["Receive queue=0x3", "ver=6", "tc=12", "flow_hi4=0x9", "nexthdr=17", "hoplimit=34"]
+ for field2 in fields_list2:
+ self.verify(field2 in out2, mesg2)
+
+ # send TCP
+ pkg_type = 'TCP'
+ config = [('ether', {'dst': self.dst_mac}),
+ ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2'}),
+ ('tcp', {'flags': 'AS', 'src': 25, 'dst': 23})]
+ out3 = self.combine_and_send_pkts(pkg_type, config)
+ mesg3 = "There are no relevant fields in the received TCP packet."
+ fields_list3 = ["Receive queue=0x4", "doff=5", "flags=AS"]
+ for field3 in fields_list3:
+ self.verify(field3 in out3, mesg3)
+ self.dut.send_expect("quit", "#", 15)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.restory_test_pmd()
--
2.17.2
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V1] tests:Add new test_suite flexible rxd.
2019-12-16 1:32 [dts] [PATCH V1] tests:Add new test_suite flexible rxd zhu,shuai
@ 2019-12-26 5:48 ` Chen, Zhaoyan
0 siblings, 0 replies; 2+ messages in thread
From: Chen, Zhaoyan @ 2019-12-26 5:48 UTC (permalink / raw)
To: dts; +Cc: Zhu, ShuaiX, Chen, Zhaoyan
Comments inline
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: Zhu, ShuaiX <shuaix.zhu@intel.com>
> Sent: Monday, December 16, 2019 9:32 AM
> To: dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>; Zhu, ShuaiX <shuaix.zhu@intel.com>
> Subject: [dts][PATCH V1] tests:Add new test_suite flexible rxd.
>
> add new test_suite flexible rxd.
>
> Signed-off-by: zhu,shuai <shuaix.zhu@intel.com>
> ---
> tests/TestSuite_flexible_rxd.py | 302 ++++++++++++++++++++++++++++++++
> 1 file changed, 302 insertions(+)
> create mode 100644 tests/TestSuite_flexible_rxd.py
>
> diff --git a/tests/TestSuite_flexible_rxd.py b/tests/TestSuite_flexible_rxd.py new file
> mode 100644 index 0000000..9ebd97e
> --- /dev/null
> +++ b/tests/TestSuite_flexible_rxd.py
> @@ -0,0 +1,302 @@
> +# Copyright (c) <2019> Intel Corporation # All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# - Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +#
> +# - Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +#
> +# - Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS #
> FOR
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
> COPYRIGHT
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, #
> INCIDENTAL,
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT NOT
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS OF USE,
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON
> ANY
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR TORT
> +(INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE
> USE
> +OF THIS SOFTWARE, EVEN IF ADVISED # OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +import time
> +from test_case import TestCase
> +from packet import Packet
> +from pmd_output import PmdOutput
> +
> +TYPE = ["0x8100", "0x88A8", "0x9100"]
> +
> +
> +class TestFlexibleRxd(TestCase):
> +
> + def set_up_all(self):
> + """
> + run at the start of each test suite.
> + """
> + self.verify(self.nic in ["columbiaville_25g", "columbiaville_100g"],
> + "flexible rxd only supports CVL NIC.")
> + self.nb_core = 2
> + self.pkg_count = 1
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + self.pci_info = self.dut.ports_info[0]['pci']
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.ports_socket)
> + self.verify(len(self.cores) >= 3, "The machine has too few cores.")
> + self.tx_interface =
> self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
> + self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
> + self.src_mac = self.tester.get_mac(self.tester.get_local_port(self.dut_ports[0]))
> + self.pmdout = PmdOutput(self.dut)
> + self.prepare_test_pmd()
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def prepare_test_pmd(self):
> + """
> + Modify the dpdk code.
> + """
> + self.dut.send_expect("cp ./app/test-pmd/util.c .", "#", 15)
> + self.dut.send_expect(
> + "sed -i '/#include <rte_flow.h>/a\#include <rte_pmd_ice.h>' app/test-
> pmd/util.c", "#", 15)
> + self.dut.send_expect(
> + "sed -i '/if (ol_flags & PKT_RX_TIMESTAMP)/i\
> rte_net_ice_dump_proto_xtr_metadata(mb);' app/test-pmd/util.c", "#", 15)
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def restory_test_pmd(self):
> + """
> + Resume editing operation.
> + """
> + self.dut.send_expect("\cp ./util.c ./app/test-pmd/", "#", 15)
> + self.dut.send_expect("rm -rf ./util.c", "#", 15)
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def start_testpmd(self, pkg_type):
> + """
> + start testpmd
> + """
> + eal_params = self.dut.create_eal_parameters(cores=self.cores,
> ports=[self.pci_info],
> + port_options={self.pci_info: 'proto_xtr=%s' % pkg_type})
> + self.pmdout.execute_cmd("./%s/app/testpmd %s -- -i --rxq=32 --txq=32 --
> portmask=0x1 --nb-cores=%d" % \
> + (self.target, eal_params, self.nb_core))
[Chen, Zhaoyan] pmdout has already integrated create_eal_parameters. So we don't need generate eal first then call pmdout
> + self.pmdout.execute_cmd("set verbose 1", "testpmd> ", 120)
> + self.pmdout.execute_cmd("set fwd io", "testpmd> ", 120)
> + self.pmdout.execute_cmd("set promisc all off", "testpmd> ", 120)
> + self.pmdout.execute_cmd("clear port stats all", "testpmd> ", 120)
> + self.pmdout.execute_cmd("start", "testpmd> ", 120)
> +
> + def verify_result(self, fields_list, out, mesg):
> + """
> + Validation results
> + """
> + for field in fields_list:
> + self.verify(field in out, mesg)
> + self.dut.send_expect("quit", "#", 15)
> +
> + def combine_and_send_pkts(self, pkg_type, config, ether_type=None):
> + if pkg_type == 'vlan':
> + num = config['vlan_tag']
> + vlan_list = []
> + for i in range(num):
> + vlan_list.append('Dot1Q(prio=%d+1,vlan=%d+23)' % (i, i))
> + self.vlan_str = '/'.join(vlan_list)
> + pkt_str = 'Ether(src="%s", dst="%s", type=%s)/%s/IP()/UDP()/DNS()' %
> (self.src_mac, self.dst_mac, ether_type, self.vlan_str)
> + pkt = Packet(pkt_str)
> + else:
> + pkt = Packet(pkt_type=pkg_type, pkt_len=128)
> + pkt.config_layers(config)
> + pkt.send_pkt(self.tester, tx_port=self.tx_interface, count=self.pkg_count,
> timeout=30)
> + out_info = self.dut.get_session_output(timeout=3)
> + return out_info
> +
[Chen, Zhaoyan] We don't need this combine_and send pkts function, for each test case has specific scapy packet.
I feel that if put packet str in each test case directly, the test case will be more readable.
> + def test_check_single_VLAN_fields_in_RXD_8021Q(self):
> + """
> + Check single VLAN fields in RXD (802.1Q)
> + """
> + self.start_testpmd('vlan')
> + config = {'vlan_tag': 1}
> + out = self.combine_and_send_pkts('vlan', config, ether_type=TYPE[0])
> + mesg = "The packet does not carry a VLAN tag."
> + fields_list = ["vlan"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_single_VLAN_fields_in_RXD_8021ad(self):
> + """
> + Check single VLAN fields in RXD (802.1ad)
> + """
> + self.start_testpmd("vlan")
> + config = {'vlan_tag': 1}
> + out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
> + mesg = "stag result is not expected (stag=1:0:23)"
> + fields_list = ["stag=1:0:23"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_double_VLAN_fields_in_RXD_8021Q_1_VLAN_tag(self):
> + """
> + Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
> + """
> + self.start_testpmd("vlan")
> + config = {'vlan_tag': 1}
> + out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
> + mesg = "stag result is not expected (stag=1:0:23)"
> + fields_list = ["stag=1:0:23"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_double_VLAN_fields_in_RXD_8021Q_2_VLAN_tag(self):
> + """
> + Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
> + """
> + self.start_testpmd("vlan")
> + config = {'vlan_tag': 2}
> + out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
> + mesg = "There are no related fields in the received VLAN packet"
> + fields_list = ["stag=1:0:23", "ctag=2:0:24"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_double_VLAN_fields_in_RXD_8021ad(self):
> + """
> + Check double VLAN fields in RXD (802.1ad)
> + """
> + self.start_testpmd("vlan")
> + config = {'vlan_tag': 2}
> + out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
> + mesg = "There are no related fields in the received VLAN packet"
> + fields_list = ["stag=1:0:23", "ctag=2:0:24"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_IPv4_fields_in_RXD(self):
> + """
> + Check IPv4 fields in RXD
> + """
> + self.start_testpmd("ipv4")
> + pkg_type = 'UDP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('ipv4', {'tos': 23, 'ttl': 98})]
> + out = self.combine_and_send_pkts(pkg_type, config)
> + mesg = "There are no related fields in the received IPV4 packet"
> + fields_list = ["ver=4", "hdrlen=5", "tos=23", "ttl=98", "proto=17"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_IPv6_fields_in_RXD(self):
> + """
> + Check IPv6 fields in RXD
> + """
> + self.start_testpmd("ipv6")
> + pkg_type = 'IPv6_UDP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
> + out = self.combine_and_send_pkts(pkg_type, config)
> + mesg = "There are no related fields in the received IPV6 packet"
> + fields_list = ["ver=6", "tc=12", "flow_hi4=0x9", "nexthdr=17", "hoplimit=34"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_IPv6_flow_field_in_RXD(self):
> + """
> + Check IPv6 flow field in RXD
> + """
> + self.start_testpmd("ipv6_flow")
> + pkg_type = 'IPv6_UDP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
> + out = self.combine_and_send_pkts(pkg_type, config)
> + mesg = "There are no related fields in the received IPV6_flow packet"
> + fields_list = ["ver=6", "tc=12", "flow=0x98765"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_TCP_fields_in_IPv4_in_RXD(self):
> + """
> + Check TCP fields in IPv4 in RXD
> + """
> + self.start_testpmd("tcp")
> + pkg_type = 'TCP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('tcp', {'flags': 'AS'})]
> + out = self.combine_and_send_pkts(pkg_type, config)
> + mesg = "There are no related fields in the received TCP packet"
> + fields_list = ["doff=5", "flags=AS"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_TCP_fields_in_IPv6_in_RXD(self):
> + """
> + Check TCP fields in IPv6 in RXD
> + """
> + self.start_testpmd("tcp")
> + pkg_type = 'IPv6_TCP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('tcp', {'flags': 'S'})]
> + out = self.combine_and_send_pkts(pkg_type, config)
> + mesg = "There are no related fields in the received TCP packet"
> + fields_list = ["doff=5", "flags=S"]
> + self.verify_result(fields_list, out, mesg)
> +
> + def test_check_IPv4_IPv6_TCP_fields_in_RXD_on_specific_queues(self):
> + """
> + Check IPv4, IPv6, TCP fields in RXD on specific queues
> + """
> + self.start_testpmd("'[(2):ipv4,(3):ipv6,(4):tcp]'")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth dst is %s / ipv4 src is 192.168.0.1 dst is
> 192.168.0.2 tos is 23 ttl is 98 / end actions queue index 2 / end" % self.dst_mac,
> "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 12 /
> end actions queue index 3 / end", "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth dst is %s / ipv4 src is
> + 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions
> + queue index 4 / end" % self.dst_mac, "created")
> +
> + # send IPv4
> + pkg_type = 'UDP'
> + config = [('ether', {'dst': self.dst_mac}),
> + ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2', 'tos': 23, 'ttl': 98})]
> + out1 = self.combine_and_send_pkts(pkg_type, config)
> + mesg1 = "There are no relevant fields in the received IPv4 packet."
> + fields_list1 = ["Receive queue=0x2", "ver=4", "hdrlen=5", "tos=23", "ttl=98",
> "proto=17"]
> + for field1 in fields_list1:
> + self.verify(field1 in out1, mesg1)
> +
> + # send IPv6
> + pkg_type = 'IPv6_UDP'
> + config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
> + ('ipv6', {'src': '2001::3', 'dst': '2001::4', 'tc': 12, 'hlim': 34, 'fl': 0x98765})]
> + out2 = self.combine_and_send_pkts(pkg_type, config)
> + mesg2 = "There are no relevant fields in the received IPv6 packet."
> + fields_list2 = ["Receive queue=0x3", "ver=6", "tc=12", "flow_hi4=0x9",
> "nexthdr=17", "hoplimit=34"]
> + for field2 in fields_list2:
> + self.verify(field2 in out2, mesg2)
> +
> + # send TCP
> + pkg_type = 'TCP'
> + config = [('ether', {'dst': self.dst_mac}),
> + ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2'}),
> + ('tcp', {'flags': 'AS', 'src': 25, 'dst': 23})]
> + out3 = self.combine_and_send_pkts(pkg_type, config)
> + mesg3 = "There are no relevant fields in the received TCP packet."
> + fields_list3 = ["Receive queue=0x4", "doff=5", "flags=AS"]
> + for field3 in fields_list3:
> + self.verify(field3 in out3, mesg3)
> + self.dut.send_expect("quit", "#", 15)
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.restory_test_pmd()
> --
> 2.17.2
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-26 5:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-16 1:32 [dts] [PATCH V1] tests:Add new test_suite flexible rxd zhu,shuai
2019-12-26 5:48 ` Chen, Zhaoyan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).