From: "Chen, Zhaoyan" <zhaoyan.chen@intel.com>
To: "Chen, BoX C" <box.c.chen@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Chen, BoX C" <box.c.chen@intel.com>,
"Chen, Zhaoyan" <zhaoyan.chen@intel.com>
Subject: Re: [dts] [PATCH V2] tests/ABI_stable: add negative test
Date: Sun, 26 Apr 2020 02:45:45 +0000 [thread overview]
Message-ID: <9DEEADBC57E43F4DA73B571777FECECA41F329AE@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20200426021534.20510-1-box.c.chen@intel.com>
Acked-by: Chen, Zhaoyan <zhaoyan.chen@intel.com>
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of ChenBo
> Sent: Sunday, April 26, 2020 10:16 AM
> To: dts@dpdk.org
> Cc: Chen, BoX C <box.c.chen@intel.com>
> Subject: [dts] [PATCH V2] tests/ABI_stable: add negative test
>
> Add ABI stable test case: negative
>
> Signed-off-by: ChenBo <box.c.chen@intel.com>
> ---
> tests/TestSuite_ABI_stable.py | 118
> ++++++++++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
> create mode 100644 tests/TestSuite_ABI_stable.py
>
> diff --git a/tests/TestSuite_ABI_stable.py b/tests/TestSuite_ABI_stable.py
> new file mode 100644 index 0000000..522296a
> --- /dev/null
> +++ b/tests/TestSuite_ABI_stable.py
> @@ -0,0 +1,118 @@
> +# BSD LICENSE
> +#
> +# Copyright (c) <2019-2020>, Intel Corporation # All rights reserved.
> +
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +#
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +#
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS # FOR
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE #
> COPYRIGHT
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, #
> INCIDENTAL,
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES # (INCLUDING, BUT
> NOT
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR # SERVICES; LOSS
> OF USE,
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED
> AND ON ANY
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, # STRICT LIABILITY, OR
> TORT
> +(INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF
> THE USE
> +OF THIS SOFTWARE, EVEN IF ADVISED # OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +#
> +# =====================
> +# DPDK ABI Stable Tests
> +# =====================
> +#
> +# Description
> +# ===========
> +#
> +# This test suite includes both functional and performance test cases
> +to # ensure that DPDK point releases (xx.02, xx.05, xx.08) are not only
> +binary # compatible, but are also functionally and reasonably
> +performance # compatibly with the previous vxx.11 release.
> +
> +
> +"""
> +DPDK Test suite.
> +
> +Test support of ABI .
> +
> +"""
> +import utils
> +import time
> +
> +from test_case import TestCase
> +from pmd_output import PmdOutput
> +from settings import load_global_setting, HOST_SHARED_LIB_SETTING,
> +HOST_SHARED_LIB_PATH
> +
> +
> +class TestABIStable(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.pmdout = PmdOutput(self.dut)
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.port_mask = utils.create_mask([self.dut_ports[0]])
> + use_shared_lib = load_global_setting(HOST_SHARED_LIB_SETTING)
> + self.verify(use_shared_lib != 'ture', "The case only support
> + ABI mode")
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def test_negative(self):
> + net_device = self.dut.ports_info[0]['port']
> + nic_drive = net_device.get_nic_driver()
> + shared_lib_path = load_global_setting(HOST_SHARED_LIB_PATH)
> + self.verify(nic_drive != "ixgbe", "The case only support ixgbe
> + drive")
> +
> + cmd = 'rm -rf {}'.format(shared_lib_path)
> + self.dut.send_expect(cmd, "#")
> + cmd = 'cp -a /root/shared_lib_negative {}'.format(shared_lib_path)
> + self.dut.send_expect(cmd, "#")
> + self.pmdout.start_testpmd("Default", "--portmask={}
> ".format(self.port_mask))
> + time.sleep(1)
> + self.dut.send_expect("set fwd txonly", "testpmd>")
> + self.dut.send_expect("start", "testpmd>")
> + time.sleep(1)
> + try:
> + self.dut.send_expect("quit", "#")
> + except Exception as e:
> + if 'TIMEOUT' in str(e):
> + self.logger.info(str(e))
> + else:
> + self.verify(False, "No timeout")
> + self.dut.kill_all()
> + return
> +
> + self.verify(False, "negative test failed")
> + self.dut.kill_all()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + pass
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.dut.kill_all()
> --
> 2.17.1
next prev parent reply other threads:[~2020-04-26 2:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-26 2:15 ChenBo
2020-04-26 2:45 ` Chen, Zhaoyan [this message]
2020-04-27 7:50 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9DEEADBC57E43F4DA73B571777FECECA41F329AE@SHSMSX104.ccr.corp.intel.com \
--to=zhaoyan.chen@intel.com \
--cc=box.c.chen@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).