Re: [dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test case

["Zhang, Yuwei1" <yuwei1.zhang@intel.com>]

Asked-by: Yuwei Zhang<yuwei1.zhang@intel.com>


> 在 2019年8月14日，下午5:23，Zhang, YanX A <yanx.a.zhang@intel.com> 写道：
> 
> 1. add a test case.
> 2. Fix some problems.
> 
> Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
> ---
> test_plans/vf_interrupt_pmd_test_plan.rst | 57 +++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 3 deletions(-)
> 
> diff --git a/test_plans/vf_interrupt_pmd_test_plan.rst b/test_plans/vf_interrupt_pmd_test_plan.rst
> index 6464ebc..8f91b14 100644
> --- a/test_plans/vf_interrupt_pmd_test_plan.rst
> +++ b/test_plans/vf_interrupt_pmd_test_plan.rst
> @@ -71,11 +71,11 @@ in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
> Test Case1: Check Interrupt for PF with vfio driver on ixgbe and i40e
> =====================================================================
> 
> -1. Bind NIC PF to igb_uio drvier::
> +1. Bind NIC PF to vfio-pci drvier::
> 
>     modprobe vfio-pci;
> 
> -    usertools/dpdk-devbind.py --bind=igb-uio 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> 
> 2. start l3fwd-power with PF::
> 
> @@ -99,7 +99,7 @@ Test Case2: Check Interrupt for PF with igb_uio driver on ixgbe and i40e
>     modprobe uio;
>     insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko;
> 
> -    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=igb_uio 0000:04:00.0
> 
> 2. start l3fwd-power with PF::
> 
> @@ -140,3 +140,54 @@ Test Case3: Check Interrupt for VF with vfio driver on ixgbe and i40e
> 4. Check if threads on core 2 have returned to sleep mode::
> 
>     L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> +
> +Test Case4: VF interrupt pmd in VM with vfio-pci
> +================================================
> +
> +1. Generate NIC VF, then bind it to vfio drvier::
> +
> +    echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/sriov_numvfs
> +
> +    modprobe vfio-pci
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:10.0(vf_pci)
> +
> +2. passthrough VF 0 to VM0 and start VM0::
> +
> +    taskset -c 4,5,6,7 qemu-system-x86_64 \
> +    -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
> +    -device e1000,netdev=nttsip1  -netdev user,id=nttsip1,hostfwd=tcp:10.240.176.207:6000-:22 \
> +    -device vfio-pci,host=0000:04:02.0,id=pt_0 -cpu host -smp 4 -m 10240 \
> +    -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
> +    -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :11 \
> +    -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
> +
> +3. Modify the DPDK-l3fwd-power source code and recompile the l3fwd-power::
> +
> +    sed -i -e '/DEV_RX_OFFLOAD_CHECKSUM,/d' ./examples/l3fwd-power/main.c
> +
> +    export RTE_TARGET=x86_64-native-linuxapp-gcc
> +    export RTE_SDK=`/root/DPDK`
> +    make -C examples/l3fwd-power
> +
> +4. Bind VF 0 to the vfio-pci driver::
> +
> +    modprobe -r vfio_iommu_type1
> +    modprobe -r vfio
> +    modprobe vfio enable_unsafe_noiommu_mode=1
> +    modprobe vfio-pci
> +
> +    usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0
> +
> +5. start l3fwd-power in VM::
> +
> +    examples/l3fwd-power/build/l3fwd-power -l 1-3 -n 4 -- -P -p 0x01  --config '(0,0,2)'
> +
> +6. Send packet with packet generator to the VM, check that thread core2 waked up::
> +
> +    sendp([Ether(dst='vf_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX')], iface="tester_intf")
> +
> +    L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 0
> +
> +7. Check if threads on core 2 have returned to sleep mode::
> +
> +    L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> \ No newline at end of file
> -- 
> 2.17.2
>