* [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan
@ 2017-01-16 8:29 yufengx.mo
2017-01-16 8:29 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan yufengx.mo
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: yufengx.mo @ 2017-01-16 8:29 UTC (permalink / raw)
To: dts; +Cc: yufengmx
From: yufengmx <yufengx.mo@intel.com>
*.add nic's firmware/bus-info information query checking, which is corresponding with Qiming Yang's patchset 18597-18600 patchset 18601
yufengmx (2):
userspace_ethtool: update test plan.
userspace_ethtool: update automation testing script.
test_plans/userspace_ethtool_test_plan.rst | 8 +-
tests/TestSuite_userspace_ethtool.py | 141 +++++++++++++++++++++++------
2 files changed, 117 insertions(+), 32 deletions(-)
--
1.9.3
^ permalink raw reply [flat|nested] 8+ messages in thread* [dts] [PATCH V2 1/2] userspace_ethtool: update test plan. 2017-01-16 8:29 [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan yufengx.mo @ 2017-01-16 8:29 ` yufengx.mo 2017-01-16 8:52 ` Mo, YufengX 2017-01-16 8:29 ` [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script yufengx.mo 2017-01-16 8:52 ` [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan Mo, YufengX 2 siblings, 1 reply; 8+ messages in thread From: yufengx.mo @ 2017-01-16 8:29 UTC (permalink / raw) To: dts; +Cc: yufengmx From: yufengmx <yufengx.mo@intel.com> *. add nic's firmware/bus-info information query checking Signed-off-by: yufengmx <yufengx.mo@intel.com> --- test_plans/userspace_ethtool_test_plan.rst | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/test_plans/userspace_ethtool_test_plan.rst b/test_plans/userspace_ethtool_test_plan.rst index 83e7fac..498cc38 100644 --- a/test_plans/userspace_ethtool_test_plan.rst +++ b/test_plans/userspace_ethtool_test_plan.rst @@ -65,8 +65,12 @@ dumped information, which are dumped separately by dpdk's ethtool and linux's ethtool, were exactly the same. EthApp> drvinfo - Port 0 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) - Port 1 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) + Port 0 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) + bus-info: 0000:84:00.0 + firmware-version: 0x61bf0001 + Port 1 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) + bus-info: 0000:84:00.1 + firmware-version: 0x61bf0001 Use "link" command to dump all ports link status. Notice:: On FVL, link detect need a physical link disconnect. -- 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dts] [PATCH V2 1/2] userspace_ethtool: update test plan. 2017-01-16 8:29 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan yufengx.mo @ 2017-01-16 8:52 ` Mo, YufengX 0 siblings, 0 replies; 8+ messages in thread From: Mo, YufengX @ 2017-01-16 8:52 UTC (permalink / raw) To: Liu, Yong; +Cc: dts ignore this mail. > -----Original Message----- > From: Mo, YufengX > Sent: January 16, 2017 4:30 PM > To: dts@dpdk.org > Cc: Mo, YufengX > Subject: [dts][PATCH V2 1/2] userspace_ethtool: update test plan. > > From: yufengmx <yufengx.mo@intel.com> > > > *. add nic's firmware/bus-info information query checking > > Signed-off-by: yufengmx <yufengx.mo@intel.com> > --- > test_plans/userspace_ethtool_test_plan.rst | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/test_plans/userspace_ethtool_test_plan.rst b/test_plans/userspace_ethtool_test_plan.rst > index 83e7fac..498cc38 100644 > --- a/test_plans/userspace_ethtool_test_plan.rst > +++ b/test_plans/userspace_ethtool_test_plan.rst > @@ -65,8 +65,12 @@ dumped information, which are dumped separately by dpdk's ethtool and > linux's ethtool, were exactly the same. > > EthApp> drvinfo > - Port 0 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) > - Port 1 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) > + Port 0 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) > + bus-info: 0000:84:00.0 > + firmware-version: 0x61bf0001 > + Port 1 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) > + bus-info: 0000:84:00.1 > + firmware-version: 0x61bf0001 > > Use "link" command to dump all ports link status. > Notice:: On FVL, link detect need a physical link disconnect. > -- > 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script. 2017-01-16 8:29 [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan yufengx.mo 2017-01-16 8:29 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan yufengx.mo @ 2017-01-16 8:29 ` yufengx.mo 2017-01-16 8:52 ` Mo, YufengX 2017-01-16 8:52 ` [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan Mo, YufengX 2 siblings, 1 reply; 8+ messages in thread From: yufengx.mo @ 2017-01-16 8:29 UTC (permalink / raw) To: dts; +Cc: yufengmx From: yufengmx <yufengx.mo@intel.com> *. add nic's firmware/bus-info information query checking, which is corresponding with Qiming Yang's patchset 18597-18600(accepted) patchset 18601(accepted) Signed-off-by: yufengmx <yufengx.mo@intel.com> --- tests/TestSuite_userspace_ethtool.py | 141 +++++++++++++++++++++++++++-------- 1 file changed, 111 insertions(+), 30 deletions(-) diff --git a/tests/TestSuite_userspace_ethtool.py b/tests/TestSuite_userspace_ethtool.py index ced7e96..937a9e5 100644 --- a/tests/TestSuite_userspace_ethtool.py +++ b/tests/TestSuite_userspace_ethtool.py @@ -128,22 +128,6 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): else: return 1518 - def resize_linux_eeprom_file(self, dpdk_eeprom_file, linux_eeprom_file): - basePath = os.sep + "root" + self.dut.base_dir[1:] + os.sep - with open( basePath + os.sep + dpdk_eeprom_file, 'rb') as fpDpdk: - dpdk_bytes = fpDpdk.read() - dpdk_length = len(dpdk_bytes) - - with open( basePath + linux_eeprom_file, 'rb') as fplinux: - linux_bytes = fplinux.read() - linux_length = len(linux_bytes) - - self.verify(dpdk_length <= linux_length, - "linux ethtool haven't dump out enough data as dpdk ethtool") - - with open( basePath + linux_eeprom_file, 'wb') as fplinux: - fplinux.write(linux_bytes[:dpdk_length]) - def strip_md5(self, filename): md5_info = self.dut.send_expect("md5sum %s" % filename, "# ") md5_pattern = r"(\w+) (\w+)" @@ -153,25 +137,123 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): else: return "" + def dpdk_get_nic_info(self, dpdk_driver_msg): + # get nic driver information using dpdk's ethtool + info_lines = dpdk_driver_msg.strip().splitlines() + driver_pattern = r"Port (\d+) driver: (.*) \(ver: (.*)\)" + pattern = "(.*): (.*)" + firmwarePat = "0x([0-9a-f]+)" + check_content = ['firmware-version', 'driver'] + nic_infos = {} + port = None + cnt = 0 + while cnt < len(info_lines): + if not info_lines[cnt]: + pass + else: + m = re.match(driver_pattern, info_lines[cnt]) + if m: + port = m.group(1) + nic_infos[port] = {} + nic_infos[port]['driver'] = m.group(2).split('_').pop() + dpdk_version = m.group(3) + else: + if port: + out = re.findall(pattern, info_lines[cnt], re.M)[0] + if len(out) == 2: + if out[0] == 'firmware-version': + nic_infos[port][out[0]] = "0x" + re.findall(firmwarePat, out[1], re.M)[0] + else: + nic_infos[port][out[0]] = out[1] + cnt += 1 + # check driver content + status = [] + for port_no in nic_infos: + nic_info = nic_infos[port_no] + for item in check_content: + if item not in nic_info.keys(): + status.append("port {0} get {1} failed".format(port_no, item)) + break + # if there is error in status, clear nic_infos + if status: + msg = os.linesep.join(status) + nic_infos = None + else: + msg = '' + + return nic_infos, msg + + def linux_get_nic_info(self, port_name): + # get nic driver information using linux's ethtool + pattern = "(.*): (.*)" + firmwarePat = "0x([0-9a-f]+)" + infos = self.dut.send_expect("ethtool -i %s"%port_name, "# ").splitlines() + sys_nic_info = {} + for info in infos: + if not info: + continue + result = re.findall(pattern, info, re.M) + if not result: + continue + out = result[0] + if len(out) == 2: + if out[0] == 'firmware-version': + sys_nic_info[out[0]] = "0x" + re.findall(firmwarePat, out[1], re.M)[0] + else: + sys_nic_info[out[0]] = out[1] + return sys_nic_info + + def check_driver_info(self, port_name, sys_nic_info, dpdk_drv_info): + # compare dpdk query nic information with linux query nic information + for item, value in dpdk_drv_info.items(): + if item not in sys_nic_info.keys(): + msg = "linux ethtool failed to dump driver info" + status = False + break + if value != sys_nic_info[item]: + msg = "Userspace ethtool failed to dump driver info" + status = False + break + else: + msg = "{0}: dpdk ethtool dump nic information done".format(port_name) + status = True + + return status, msg + def test_dump_driver_info(self): """ Test ethtool can dump basic information """ self.dut.send_expect(self.cmd, "EthApp>", 60) - out = self.dut.send_expect("drvinfo", "EthApp>") - driver_pattern = r"Port (\d+) driver: rte_(.*)_pmd \(ver: RTE (.*)\)" - driver_infos = out.split("\r\n") - self.verify(len(driver_infos) > 1, "Userspace tool failed to dump driver infor") - - # check dump driver info function - for driver_info in driver_infos: - m = re.match(driver_pattern, driver_info) - if m: - port = m.group(1) - driver = m.group(2) - version = m.group(3) - print utils.GREEN("Detect port %s with %s driver\n" % (port, driver)) + dpdk_driver_msg = self.dut.send_expect("drvinfo", "EthApp>") + self.dut.send_expect("quit", "# ") + dpdk_nic_infos, msg = self.dpdk_get_nic_info(dpdk_driver_msg) + self.verify(dpdk_nic_infos, msg) + + portsinfo = {} + for index in range(len(self.ports)): + portsinfo[index] = {} + portinfo = portsinfo[index] + port = self.ports[index] + netdev = self.dut.ports_info[port]['port'] + # strip orignal driver + portinfo['ori_driver'] = netdev.get_nic_driver() + portinfo['net_dev'] = netdev + # bind to default driver + netdev.bind_driver() + # get linux interface + intf_name = netdev.get_interface_name() + sys_nic_info = self.linux_get_nic_info(intf_name) + status, msg = self.check_driver_info(intf_name, sys_nic_info, dpdk_nic_infos[str(index)]) + self.logger.info(msg) + self.verify(status, msg) + for index in range(len(self.ports)): + # bind to original driver + portinfo = portsinfo[index] + portinfo['net_dev'].bind_driver(portinfo['ori_driver']) + + self.dut.send_expect(self.cmd, "EthApp>", 60) # ethtool doesn't support port disconnect by tools of linux # only detect physical link disconnect status if self.nic.startswith("fortville") == False: @@ -294,7 +376,6 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): for index in range(len(self.ports)): md5 = self.strip_md5(portsinfo[index]['eeprom_file']) - self.resize_linux_eeprom_file( portsinfo[index]['eeprom_file'], portsinfo[index]['ethtool_eeprom']) md5_ref = self.strip_md5(portsinfo[index]['ethtool_eeprom']) print utils.GREEN("Reference eeprom md5 %s" % md5) print utils.GREEN("Reference eeprom md5_ref %s" % md5_ref) -- 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script. 2017-01-16 8:29 ` [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script yufengx.mo @ 2017-01-16 8:52 ` Mo, YufengX 0 siblings, 0 replies; 8+ messages in thread From: Mo, YufengX @ 2017-01-16 8:52 UTC (permalink / raw) To: Liu, Yong; +Cc: dts ignore this mail. > -----Original Message----- > From: Mo, YufengX > Sent: January 16, 2017 4:30 PM > To: dts@dpdk.org > Cc: Mo, YufengX > Subject: [dts][PATCH V2 2/2] userspace_ethtool: update automation testing script. > > From: yufengmx <yufengx.mo@intel.com> > > > *. add nic's firmware/bus-info information query checking, which is corresponding with > Qiming Yang's > patchset 18597-18600(accepted) > patchset 18601(accepted) > > Signed-off-by: yufengmx <yufengx.mo@intel.com> > --- > tests/TestSuite_userspace_ethtool.py | 141 +++++++++++++++++++++++++++-------- > 1 file changed, 111 insertions(+), 30 deletions(-) > > diff --git a/tests/TestSuite_userspace_ethtool.py b/tests/TestSuite_userspace_ethtool.py > index ced7e96..937a9e5 100644 > --- a/tests/TestSuite_userspace_ethtool.py > +++ b/tests/TestSuite_userspace_ethtool.py > @@ -128,22 +128,6 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): > else: > return 1518 > > - def resize_linux_eeprom_file(self, dpdk_eeprom_file, linux_eeprom_file): > - basePath = os.sep + "root" + self.dut.base_dir[1:] + os.sep > - with open( basePath + os.sep + dpdk_eeprom_file, 'rb') as fpDpdk: > - dpdk_bytes = fpDpdk.read() > - dpdk_length = len(dpdk_bytes) > - > - with open( basePath + linux_eeprom_file, 'rb') as fplinux: > - linux_bytes = fplinux.read() > - linux_length = len(linux_bytes) > - > - self.verify(dpdk_length <= linux_length, > - "linux ethtool haven't dump out enough data as dpdk ethtool") > - > - with open( basePath + linux_eeprom_file, 'wb') as fplinux: > - fplinux.write(linux_bytes[:dpdk_length]) > - > def strip_md5(self, filename): > md5_info = self.dut.send_expect("md5sum %s" % filename, "# ") > md5_pattern = r"(\w+) (\w+)" > @@ -153,25 +137,123 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): > else: > return "" > > + def dpdk_get_nic_info(self, dpdk_driver_msg): > + # get nic driver information using dpdk's ethtool > + info_lines = dpdk_driver_msg.strip().splitlines() > + driver_pattern = r"Port (\d+) driver: (.*) \(ver: (.*)\)" > + pattern = "(.*): (.*)" > + firmwarePat = "0x([0-9a-f]+)" > + check_content = ['firmware-version', 'driver'] > + nic_infos = {} > + port = None > + cnt = 0 > + while cnt < len(info_lines): > + if not info_lines[cnt]: > + pass > + else: > + m = re.match(driver_pattern, info_lines[cnt]) > + if m: > + port = m.group(1) > + nic_infos[port] = {} > + nic_infos[port]['driver'] = m.group(2).split('_').pop() > + dpdk_version = m.group(3) > + else: > + if port: > + out = re.findall(pattern, info_lines[cnt], re.M)[0] > + if len(out) == 2: > + if out[0] == 'firmware-version': > + nic_infos[port][out[0]] = "0x" + re.findall(firmwarePat, out[1], re.M)[0] > + else: > + nic_infos[port][out[0]] = out[1] > + cnt += 1 > + # check driver content > + status = [] > + for port_no in nic_infos: > + nic_info = nic_infos[port_no] > + for item in check_content: > + if item not in nic_info.keys(): > + status.append("port {0} get {1} failed".format(port_no, item)) > + break > + # if there is error in status, clear nic_infos > + if status: > + msg = os.linesep.join(status) > + nic_infos = None > + else: > + msg = '' > + > + return nic_infos, msg > + > + def linux_get_nic_info(self, port_name): > + # get nic driver information using linux's ethtool > + pattern = "(.*): (.*)" > + firmwarePat = "0x([0-9a-f]+)" > + infos = self.dut.send_expect("ethtool -i %s"%port_name, "# ").splitlines() > + sys_nic_info = {} > + for info in infos: > + if not info: > + continue > + result = re.findall(pattern, info, re.M) > + if not result: > + continue > + out = result[0] > + if len(out) == 2: > + if out[0] == 'firmware-version': > + sys_nic_info[out[0]] = "0x" + re.findall(firmwarePat, out[1], re.M)[0] > + else: > + sys_nic_info[out[0]] = out[1] > + return sys_nic_info > + > + def check_driver_info(self, port_name, sys_nic_info, dpdk_drv_info): > + # compare dpdk query nic information with linux query nic information > + for item, value in dpdk_drv_info.items(): > + if item not in sys_nic_info.keys(): > + msg = "linux ethtool failed to dump driver info" > + status = False > + break > + if value != sys_nic_info[item]: > + msg = "Userspace ethtool failed to dump driver info" > + status = False > + break > + else: > + msg = "{0}: dpdk ethtool dump nic information done".format(port_name) > + status = True > + > + return status, msg > + > def test_dump_driver_info(self): > """ > Test ethtool can dump basic information > """ > self.dut.send_expect(self.cmd, "EthApp>", 60) > - out = self.dut.send_expect("drvinfo", "EthApp>") > - driver_pattern = r"Port (\d+) driver: rte_(.*)_pmd \(ver: RTE (.*)\)" > - driver_infos = out.split("\r\n") > - self.verify(len(driver_infos) > 1, "Userspace tool failed to dump driver infor") > - > - # check dump driver info function > - for driver_info in driver_infos: > - m = re.match(driver_pattern, driver_info) > - if m: > - port = m.group(1) > - driver = m.group(2) > - version = m.group(3) > - print utils.GREEN("Detect port %s with %s driver\n" % (port, driver)) > + dpdk_driver_msg = self.dut.send_expect("drvinfo", "EthApp>") > + self.dut.send_expect("quit", "# ") > + dpdk_nic_infos, msg = self.dpdk_get_nic_info(dpdk_driver_msg) > + self.verify(dpdk_nic_infos, msg) > + > + portsinfo = {} > + for index in range(len(self.ports)): > + portsinfo[index] = {} > + portinfo = portsinfo[index] > + port = self.ports[index] > + netdev = self.dut.ports_info[port]['port'] > + # strip orignal driver > + portinfo['ori_driver'] = netdev.get_nic_driver() > + portinfo['net_dev'] = netdev > + # bind to default driver > + netdev.bind_driver() > + # get linux interface > + intf_name = netdev.get_interface_name() > + sys_nic_info = self.linux_get_nic_info(intf_name) > + status, msg = self.check_driver_info(intf_name, sys_nic_info, dpdk_nic_infos[str(index)]) > + self.logger.info(msg) > + self.verify(status, msg) > > + for index in range(len(self.ports)): > + # bind to original driver > + portinfo = portsinfo[index] > + portinfo['net_dev'].bind_driver(portinfo['ori_driver']) > + > + self.dut.send_expect(self.cmd, "EthApp>", 60) > # ethtool doesn't support port disconnect by tools of linux > # only detect physical link disconnect status > if self.nic.startswith("fortville") == False: > @@ -294,7 +376,6 @@ class TestUserspaceEthtool(TestCase, IxiaPacketGenerator): > > for index in range(len(self.ports)): > md5 = self.strip_md5(portsinfo[index]['eeprom_file']) > - self.resize_linux_eeprom_file( portsinfo[index]['eeprom_file'], portsinfo[index]['ethtool_eeprom']) > md5_ref = self.strip_md5(portsinfo[index]['ethtool_eeprom']) > print utils.GREEN("Reference eeprom md5 %s" % md5) > print utils.GREEN("Reference eeprom md5_ref %s" % md5_ref) > -- > 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan 2017-01-16 8:29 [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan yufengx.mo 2017-01-16 8:29 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan yufengx.mo 2017-01-16 8:29 ` [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script yufengx.mo @ 2017-01-16 8:52 ` Mo, YufengX 2 siblings, 0 replies; 8+ messages in thread From: Mo, YufengX @ 2017-01-16 8:52 UTC (permalink / raw) To: Liu, Yong; +Cc: dts ignore this mail. > -----Original Message----- > From: Mo, YufengX > Sent: January 16, 2017 4:30 PM > To: dts@dpdk.org > Cc: Mo, YufengX > Subject: [dts][PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan > > From: yufengmx <yufengx.mo@intel.com> > > *.add nic's firmware/bus-info information query checking, which is corresponding with Qiming Yang's patchset 18597-18600 patchset > 18601 > > yufengmx (2): > userspace_ethtool: update test plan. > userspace_ethtool: update automation testing script. > > test_plans/userspace_ethtool_test_plan.rst | 8 +- > tests/TestSuite_userspace_ethtool.py | 141 +++++++++++++++++++++++------ > 2 files changed, 117 insertions(+), 32 deletions(-) > > -- > 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan @ 2017-01-16 8:13 Yufen Mo 2017-01-16 8:13 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan Yufen Mo 0 siblings, 1 reply; 8+ messages in thread From: Yufen Mo @ 2017-01-16 8:13 UTC (permalink / raw) To: dts; +Cc: yufengmx From: yufengmx <yufengx.mo@intel.com> *.add nic's firmware/bus-info information query checking, which is corresponding with Qiming Yang's patchset 18597-18600 patchset 18601 yufengmx (2): userspace_ethtool: update test plan. userspace_ethtool: update automation testing script. test_plans/userspace_ethtool_test_plan.rst | 8 +- tests/TestSuite_userspace_ethtool.py | 141 +++++++++++++++++++++++------ 2 files changed, 117 insertions(+), 32 deletions(-) -- 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [dts] [PATCH V2 1/2] userspace_ethtool: update test plan. 2017-01-16 8:13 Yufen Mo @ 2017-01-16 8:13 ` Yufen Mo 2017-01-16 8:21 ` Mo, YufengX 0 siblings, 1 reply; 8+ messages in thread From: Yufen Mo @ 2017-01-16 8:13 UTC (permalink / raw) To: dts; +Cc: yufengmx From: yufengmx <yufengx.mo@intel.com> *. add nic's firmware/bus-info information query checking Signed-off-by: yufengmx <yufengx.mo@intel.com> --- test_plans/userspace_ethtool_test_plan.rst | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/test_plans/userspace_ethtool_test_plan.rst b/test_plans/userspace_ethtool_test_plan.rst index 83e7fac..498cc38 100644 --- a/test_plans/userspace_ethtool_test_plan.rst +++ b/test_plans/userspace_ethtool_test_plan.rst @@ -65,8 +65,12 @@ dumped information, which are dumped separately by dpdk's ethtool and linux's ethtool, were exactly the same. EthApp> drvinfo - Port 0 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) - Port 1 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) + Port 0 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) + bus-info: 0000:84:00.0 + firmware-version: 0x61bf0001 + Port 1 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) + bus-info: 0000:84:00.1 + firmware-version: 0x61bf0001 Use "link" command to dump all ports link status. Notice:: On FVL, link detect need a physical link disconnect. -- 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dts] [PATCH V2 1/2] userspace_ethtool: update test plan. 2017-01-16 8:13 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan Yufen Mo @ 2017-01-16 8:21 ` Mo, YufengX 0 siblings, 0 replies; 8+ messages in thread From: Mo, YufengX @ 2017-01-16 8:21 UTC (permalink / raw) To: Liu, Yong; +Cc: dts ignore this mail. Use to test mail account > -----Original Message----- > From: Mo, YufengX > Sent: January 16, 2017 4:13 PM > To: dts@dpdk.org > Cc: Mo, YufengX > Subject: [dts][PATCH V2 1/2] userspace_ethtool: update test plan. > > From: yufengmx <yufengx.mo@intel.com> > > > *. add nic's firmware/bus-info information query checking > > Signed-off-by: yufengmx <yufengx.mo@intel.com> > --- > test_plans/userspace_ethtool_test_plan.rst | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/test_plans/userspace_ethtool_test_plan.rst b/test_plans/userspace_ethtool_test_plan.rst > index 83e7fac..498cc38 100644 > --- a/test_plans/userspace_ethtool_test_plan.rst > +++ b/test_plans/userspace_ethtool_test_plan.rst > @@ -65,8 +65,12 @@ dumped information, which are dumped separately by dpdk's ethtool and > linux's ethtool, were exactly the same. > > EthApp> drvinfo > - Port 0 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) > - Port 1 driver: rte_ixgbe_pmd (ver: RTE 2.1.0) > + Port 0 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) > + bus-info: 0000:84:00.0 > + firmware-version: 0x61bf0001 > + Port 1 driver: net_ixgbe (ver: DPDK 17.02.0-rc0) > + bus-info: 0000:84:00.1 > + firmware-version: 0x61bf0001 > > Use "link" command to dump all ports link status. > Notice:: On FVL, link detect need a physical link disconnect. > -- > 1.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-01-16 8:53 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-01-16 8:29 [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan yufengx.mo 2017-01-16 8:29 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan yufengx.mo 2017-01-16 8:52 ` Mo, YufengX 2017-01-16 8:29 ` [dts] [PATCH V2 2/2] userspace_ethtool: update automation testing script yufengx.mo 2017-01-16 8:52 ` Mo, YufengX 2017-01-16 8:52 ` [dts] [PATCH V2 0/2] userspace_ethtool: update automation testing script/test plan Mo, YufengX -- strict thread matches above, loose matches on Subject: below -- 2017-01-16 8:13 Yufen Mo 2017-01-16 8:13 ` [dts] [PATCH V2 1/2] userspace_ethtool: update test plan Yufen Mo 2017-01-16 8:21 ` Mo, YufengX
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).