* [dts] [PATCH V2][pmd_stacked_bonded]: upload test plan and automation script
@ 2019-02-28 6:01 yufengmx
2019-02-28 6:01 ` [dts] [PATCH V2]pmd_stacked_bonded: upload " yufengmx
0 siblings, 1 reply; 5+ messages in thread
From: yufengmx @ 2019-02-28 6:01 UTC (permalink / raw)
To: dts; +Cc: yufengmx
pmd stacked bonded automation script
v2:
- move the same methods as pmd_bonded_8023ad suite in bonding.py.
- refactor packet traffic method.
- remove debug methods.
- remove un-used parameters.
- fix typo issue.
yufengmx (1):
pmd_stacked_bonded: upload automation script
tests/TestSuite_pmd_stacked_bonded.py | 531 ++++++++++++++++++++++++++++++++++
1 file changed, 531 insertions(+)
create mode 100644 tests/TestSuite_pmd_stacked_bonded.py
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
2019-02-28 6:01 [dts] [PATCH V2][pmd_stacked_bonded]: upload test plan and automation script yufengmx
@ 2019-02-28 6:01 ` yufengmx
2019-02-28 6:03 ` Mo, YufengX
2019-02-28 11:02 ` Tu, Lijuan
0 siblings, 2 replies; 5+ messages in thread
From: yufengmx @ 2019-02-28 6:01 UTC (permalink / raw)
To: dts; +Cc: yufengmx
This automation script is for pmd stacked bonded feature.
Allow bonded devices to be stacked to allow two or more bonded devices to be
bonded into one master bonded device
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_pmd_stacked_bonded.py | 531 ++++++++++++++++++++++++++++++++++
1 file changed, 531 insertions(+)
create mode 100644 tests/TestSuite_pmd_stacked_bonded.py
diff --git a/tests/TestSuite_pmd_stacked_bonded.py b/tests/TestSuite_pmd_stacked_bonded.py
new file mode 100644
index 0000000..e1ce01a
--- /dev/null
+++ b/tests/TestSuite_pmd_stacked_bonded.py
@@ -0,0 +1,531 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import time
+import traceback
+
+# import dts/framework libs
+import utils
+from test_case import TestCase
+from exception import VerifyFailure
+
+# import bonding lib
+import bonding
+from bonding import (
+ MODE_ROUND_ROBIN,
+ MODE_ACTIVE_BACKUP,
+ MODE_XOR_BALANCE,
+ MODE_BROADCAST,
+ MODE_LACP,
+ MODE_TLB_BALANCE,
+ MODE_ALB_BALANCE,
+ FRAME_SIZE_64)
+
+class TestBondingStacked(TestCase):
+
+ #
+ # On dut, dpdk bonding
+ #
+ def check_bonded_device_queue_config(self, *devices):
+ '''
+ check if master bonded device/slave device queue configuration
+ is the same.
+ '''
+ # get master bonded device queue configuration
+ master = self.bond_inst.get_port_info(devices[0], 'queue_config')
+ # get slave device queue configuration
+ for port_id in devices[1:]:
+ config = self.bond_inst.get_port_info(port_id, 'queue_config')
+ if cmp(config, master) == 0:
+ continue
+ msg = ("slave bonded port [{0}] is "
+ "different to top bonded port [{1}]").format(
+ port_id, devices[0])
+ raise VerifyFailure('bonded device queue config:: ' + msg)
+
+ def set_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode,
+ ignore=False):
+ '''
+ set stacked bonded mode for a custom bonding mode
+ '''
+ inst = self.bond_inst
+ socket_id = self.dut.get_numa_id(self.bond_slave)
+ # create first bonded device 1, add slaves in it
+ bond_port_1 = inst.create_bonded_device(bond_mode, socket_id)
+ inst.add_slave(bond_port_1, False, '', *slaveGrpOne)
+ # create second bonded device 2, add slaves in it
+ bond_port_2 = inst.create_bonded_device(bond_mode, socket_id)
+ inst.add_slave(bond_port_2, False, '', *slaveGrpTwo)
+ # create master bonded device 3, which is the top bonded device
+ master_bond_port = inst.create_bonded_device(bond_mode, socket_id)
+ # add bond bonded device 1 to bonded device 3
+ # check bonding config status
+ inst.add_slave(master_bond_port, False, '', *[bond_port_1])
+ # add bonded device 2 to bonded device 3
+ # check bonding config status
+ inst.add_slave(master_bond_port, False, '', *[bond_port_2])
+ # check if master bonding/each slaves queue configuration is the same.
+ if not ignore:
+ self.check_bonded_device_queue_config(*[master_bond_port,
+ bond_port_1, bond_port_2])
+
+ return [bond_port_1, bond_port_2, master_bond_port]
+
+ def set_third_stacked_bonded(self, bond_port, bond_mode):
+ '''
+ set third level stacked bonded to check if stacked level can be set
+ more than 2
+ '''
+ inst = self.bond_inst
+ socket_id = self.dut.get_numa_id(self.bond_slave)
+ third_bond_port = inst.create_bonded_device(bond_mode, socket_id)
+ inst.add_slave(third_bond_port, False, '', *[bond_port])
+
+ def duplicate_add_stacked_bonded(self, bond_port_1, bond_port_2,
+ master_bond_port):
+ '''
+ check if adding duplicate stacked bonded device is forbidden
+ '''
+ inst = self.bond_inst
+ # check exception process
+ expected_str = 'Slave device is already a slave of a bonded device'
+ # add bonded device 1 to bonded device 3
+ # check bonding config status
+ inst.add_slave(master_bond_port, False, expected_str, *[bond_port_1])
+ # add bonded device 2 to bonded device 3
+ # check bonding config status
+ inst.add_slave(master_bond_port, False, expected_str, *[bond_port_2])
+
+ def preset_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode):
+ bond_port_1, bond_port_2, master_bond_port = self.set_stacked_bonded(
+ slaveGrpOne,
+ slaveGrpTwo,
+ bond_mode,
+ ignore=True)
+ portList = [slaveGrpOne[0],
+ slaveGrpTwo[0],
+ bond_port_1,
+ bond_port_2,
+ master_bond_port]
+ cmds = [
+ ["port stop all", ''],
+ ["set portlist " + ",".join([str(port) for port in portList]), ''],
+ ["port start all", ' ', 15]]
+ self.bond_inst.d_console(cmds)
+ # blank space command is used to skip LSC event to avoid core dumped issue
+ time.sleep(5)
+ cmds = [ [' ', ''],
+ ["start", '']]
+ self.bond_inst.d_console(cmds)
+ time.sleep(5)
+
+ return bond_port_1, bond_port_2, master_bond_port
+
+ #
+ # packet transmission
+ #
+ def traffic(self, traffic_config, ports):
+ # get ports statistics before sending packets
+ stats_pre = self.bond_inst.get_all_stats(ports)
+ # send packets
+ self.bond_inst.send_packet(traffic_config)
+ # get ports statistics after sending packets
+ stats_post = self.bond_inst.get_all_stats(ports)
+ # calculate ports statistics result
+ for port_id in ports:
+ stats_post[port_id]['RX-packets'] -= stats_pre[port_id]['RX-packets']
+ stats_post[port_id]['TX-packets'] -= stats_pre[port_id]['TX-packets']
+
+ return stats_post
+
+ def config_port_traffic(self, tx_port, rx_port, total_pkt):
+ ''' set traffic configuration '''
+ traffic_config = {
+ 'port topo': [tx_port, rx_port],
+ 'stream': self.bond_inst.set_stream_to_slave_port(rx_port),
+ 'traffic configs': {
+ 'count': total_pkt,
+ },}
+
+ return traffic_config
+
+ def active_slave_rx(self, slave, bond_port, mode):
+ msg = "send packet to active slave port <{0}>".format(slave)
+ self.logger.info(msg)
+ tx_intf = self.tester.get_interface(
+ self.tester.get_local_port(self.dut_ports[slave]))
+ # get traffic config
+ traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
+ # select ports for statistics
+ ports = [slave, bond_port]
+ # run traffic
+ stats = self.traffic(traffic_config, ports)
+ # check slave statistics
+ msg = "port <{0}> Data not received by port <{1}>".format(
+ tx_intf, slave)
+ # here using `>=` to ignore some miscellaneous packets, e.g. lldp
+ self.verify(stats[slave]['RX-packets'] >= self.total_pkt, msg)
+ msg = "tester port {0} <----> dut port {1} is ok".format(
+ tx_intf, slave)
+ self.logger.info(msg)
+ # check bond port statistics
+ # here using `>=` to ignore some miscellaneous packets, e.g. lldp
+ self.verify(stats[slave]['RX-packets'] >= self.total_pkt,
+ "Bond port have error RX packet in XOR")
+
+ def inactive_slave_rx(self, slave, bond_port, mode):
+ msg = "send packet to inactive slave port <{0}>".format(slave)
+ self.logger.info(msg)
+ tx_intf = self.tester.get_interface(
+ self.tester.get_local_port(self.dut_ports[slave]))
+ # get traffic config
+ traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
+ # select ports for statistics
+ ports = [slave, bond_port]
+ # run traffic
+ stats = self.traffic(traffic_config, ports)
+ # check slave statistics
+ msg = ("port <{0}> Data received by port <{1}>, "
+ "but should not.").format(tx_intf, slave)
+ self.verify(stats[slave]['RX-packets'] == 0, msg)
+ msg = "tester port {0} <-| |-> dut port {1} is blocked".format(
+ tx_intf, slave)
+ self.logger.info(msg)
+ # check bond port statistics
+ self.verify(stats[slave]['RX-packets'] == 0,
+ "Bond port have error RX packet in {0}".format(mode))
+
+ def check_traffic_with_one_slave_down(self, mode):
+ """
+ Verify that transmitting packets correctly when set one slave of
+ the bonded device link down.
+ """
+ results = []
+ #-------------------------------
+ # boot up testpmd
+ self.bond_inst.start_testpmd()
+ try:
+ slaves = {'active' : [], 'inactive' : []}
+ #-------------------------------
+ # preset stacked bonded device
+ slaveGrpOne = self.slaveGrpOne
+ slaveGrpTwo = self.slaveGrpTwo
+ bond_port_1, bond_port_2, master_bond_port = \
+ self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
+ #---------------------------------------------------
+ # set one slave of first bonded device link down
+ primary_slave = slaveGrpOne[0]
+ self.bond_inst.set_dut_port_status(primary_slave, "down")
+ slaves['inactive'].append(primary_slave)
+ # get slave status
+ primary_port, active_slaves = \
+ self.bond_inst.get_active_slaves(bond_port_1)
+ slaves['active'].extend(active_slaves)
+ if primary_slave in slaves['active']:
+ msg = "{0} should not be in active slaves list".format(
+ primary_slave)
+ raise Exception(msg)
+ #---------------------------------------------------
+ # set one slave of second bonded device link down
+ primary_slave = slaveGrpTwo[0]
+ self.bond_inst.set_dut_port_status(primary_slave, "down")
+ slaves['inactive'].append(primary_slave)
+ # check active slaves
+ primary_port_2, active_slaves_2 = \
+ self.bond_inst.get_active_slaves(bond_port_2)
+ slaves['active'].extend(active_slaves_2)
+ if primary_slave in slaves['active']:
+ msg = "{0} should not be in active slaves list".format(
+ primary_slave)
+ raise Exception(msg)
+ # traffic testing
+ # active slave traffic testing
+ for slave in slaves['active']:
+ self.active_slave_rx(slave, master_bond_port, mode)
+ # inactive slave traffic testing
+ for slave in slaves['inactive']:
+ self.inactive_slave_rx(slave, master_bond_port, mode)
+ except Exception as e:
+ results.append(e)
+ self.logger.error(traceback.format_exc())
+ finally:
+ self.bond_inst.close_testpmd()
+
+ return results
+
+ def check_traffic(self, mode):
+ """ normal traffic with all slaves are under active status.
+ verify the RX packets are all correct with stacked bonded device.
+ bonded device's statistics should be the sum of slaves statistics.
+ """
+ self.bond_inst.start_testpmd()
+ slaveGrpOne = self.slaveGrpOne
+ slaveGrpTwo = self.slaveGrpTwo
+ bond_port_1, bond_port_2, master_bond_port = \
+ self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
+ results = []
+ # check first bonded device
+ try:
+ self.logger.info('check first bonded device')
+ # active slave traffic testing
+ for slave in slaveGrpOne:
+ self.active_slave_rx(slave, bond_port_1, mode)
+ except Exception as e:
+ results.append(e)
+ # check second bonded device
+ try:
+ self.logger.info('check second bonded device')
+ # active slave traffic testing
+ for slave in slaveGrpOne:
+ self.active_slave_rx(slave, bond_port_2, mode)
+ except Exception as e:
+ results.append(e)
+
+ # check top bonded device
+ try:
+ self.logger.info('check master bonded device')
+ # active slave traffic testing
+ for slave in slaveGrpOne + slaveGrpTwo:
+ self.active_slave_rx(slave, master_bond_port, mode)
+ except Exception as e:
+ results.append(e)
+
+ self.bond_inst.close_testpmd()
+
+ return results
+
+ def backup_check_traffic(self):
+ mode = MODE_ACTIVE_BACKUP
+ msg = "begin checking bonding backup(stacked) mode transmission"
+ self.logger.info(msg)
+ results = self.check_traffic(mode)
+ if results:
+ for item in results:
+ self.logger.error(item)
+ raise VerifyFailure("backup(stacked) mode: rx failed")
+
+ def backup_check_traffic_with_slave_down(self):
+ mode = MODE_ACTIVE_BACKUP
+ self.logger.info("begin checking bonding backup(stacked) "
+ "mode transmission with one slave down")
+ results = self.check_traffic_with_one_slave_down(mode)
+ if results:
+ for item in results:
+ self.logger.error(item)
+ msg = "backup(stacked) mode: rx with one slave down failed"
+ raise VerifyFailure(msg)
+
+ def xor_check_rx(self):
+ mode = MODE_XOR_BALANCE
+ msg = "begin checking bonding xor(stacked) mode transmission"
+ self.logger.info(msg)
+ results = self.check_traffic(mode)
+ if results:
+ for item in results:
+ self.logger.error(item)
+ raise VerifyFailure("xor(stacked) mode: rx failed")
+
+ def xor_check_stacked_rx_one_slave_down(self):
+ mode = MODE_XOR_BALANCE
+ self.logger.info("begin checking bonding xor(stacked) mode "
+ "transmission with one slave down")
+ results = self.check_traffic_with_one_slave_down(mode)
+ if results:
+ for item in results:
+ self.logger.error(item)
+ msg = "xor(stacked) mode: rx with one slave down failed"
+ raise VerifyFailure(msg)
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run before each test suite
+ """
+ self.verify('bsdapp' not in self.target, "Bonding not support freebsd")
+ self.dut_ports = self.dut.get_ports()
+ num_ports = len(self.dut_ports)
+ self.verify(num_ports == 2 or num_ports == 4, "Insufficient ports")
+ # separate ports into two group as first level bond ports' slaves
+ sep_index = len(self.dut_ports)/2
+ self.slaveGrpOne = self.dut_ports[:sep_index]
+ self.slaveGrpTwo = self.dut_ports[sep_index:]
+ self.bond_slave = self.dut_ports[0]
+ # initialize bonding common methods name
+ self.total_pkt = 100
+ config = {
+ 'parent': self,
+ 'pkt_name': 'udp',
+ 'pkt_size': FRAME_SIZE_64,
+ 'src_mac': '52:00:00:00:00:03',
+ 'src_ip': '10.239.129.65',
+ 'src_port': 61,
+ 'dst_ip': '10.239.129.88',
+ 'dst_port': 53,}
+ self.bond_inst = bonding.PmdBonding(**config)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+
+ def test_basic_behav(self):
+ '''
+ allow a bonded device to be added to another bonded device.
+ There's two limitations to create master bonding:
+
+ - Total depth of nesting is limited to two levels,
+ - 802.3ad mode is not supported if one or more slaves is a bond device
+
+ note: There 802.3ad mode can not be supported on this bond device.
+
+ This case is aimed at testing basic behavior of stacked bonded commands.
+
+ '''
+ #------------------------------------------------
+ # check stacked bonded status, except mode 4 (802.3ad)
+ mode_list =[MODE_ROUND_ROBIN,
+ MODE_ACTIVE_BACKUP,
+ MODE_XOR_BALANCE,
+ MODE_BROADCAST,
+ MODE_TLB_BALANCE,
+ MODE_ALB_BALANCE]
+ slaveGrpOne = self.slaveGrpOne
+ slaveGrpTwo = self.slaveGrpTwo
+ check_result = []
+ for bond_mode in mode_list:
+ self.logger.info("begin mode <{0}> checking".format(bond_mode))
+ # boot up testpmd
+ self.bond_inst.start_testpmd()
+ try:
+ self.logger.info("check bonding mode <{0}>".format(bond_mode))
+ # set up stacked bonded status
+ bond_port_1, bond_port_2, master_bond_port = \
+ self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, bond_mode)
+ # check duplicate add slave
+ self.duplicate_add_stacked_bonded(bond_port_1, bond_port_2,
+ master_bond_port)
+ # check stacked limitation
+ self.set_third_stacked_bonded(master_bond_port, bond_mode)
+ # quit testpmd, it is not supported to reset testpmd
+ self.logger.info("mode <{0}> done !".format(bond_mode))
+ check_result.append([bond_mode, None])
+ except Exception as e:
+ check_result.append([bond_mode, e])
+ self.logger.error(e)
+ finally:
+ self.bond_inst.close_testpmd()
+ time.sleep(5)
+ #------------------------------------------------
+ # 802.3ad mode is not supported
+ # if one or more slaves is a bond device
+ # so it should raise a exception
+ msg = ''
+ try:
+ # boot up testpmd
+ self.bond_inst.start_testpmd()
+ # set up stacked bonded status
+ self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, MODE_LACP)
+ # quit testpmd, it is not supported to reset testpmd
+ msg = ("802.3ad mode hasn't been forbidden to "
+ "use stacked bonded setting")
+ check_result.append([MODE_LACP, msg])
+ except Exception as e:
+ check_result.append([MODE_LACP, None])
+ finally:
+ self.bond_inst.close_testpmd()
+
+ exception_flag = False
+ for bond_mode, e in check_result:
+ msg = "mode <{0}>".format(bond_mode)
+ if e:
+ self.logger.info(msg)
+ self.logger.error(e)
+ exception_flag = True
+ else:
+ self.logger.info(msg + ' done !')
+ # if some checking item is failed, raise exception
+ if exception_flag:
+ raise VerifyFailure('some test items failed')
+ else:
+ self.logger.info('all test items have done !')
+
+ def test_mode_backup_rx(self):
+ """
+ Verify receive packets correctly in the active-backup(stacked) mode.
+ """
+ self.backup_check_traffic()
+
+ def test_mode_backup_one_slave_down(self):
+ """
+ Verify that receive packets correctly in the active-backup(stacked) mode
+ when bringing any one slave of the bonding device link down.
+ """
+ slave_down_port_limit = 4
+ if len(self.dut_ports) < slave_down_port_limit:
+ msg = ("ports less than {0}, "
+ "ignore stacked one slave down check").format(
+ slave_down_port_limit)
+ self.logger.warning(msg)
+ return
+ self.backup_check_traffic_with_slave_down()
+
+ def test_mode_xor_rx(self):
+ """
+ Verify that receive packets correctly in the XOR(stacked) mode.
+ """
+ self.xor_check_rx()
+
+ def test_mode_xor_rx_one_slave_down(self):
+ """
+ Verify that receive packets correctly in the XOR(stacked) mode when
+ bringing any one slave of the bonding device link down.
+ """
+ slave_down_port_limit = 4
+ if len(self.dut_ports) < slave_down_port_limit:
+ msg = ("ports less than {0}, "
+ "ignore stacked one slave down check").format(
+ slave_down_port_limit)
+ self.logger.warning(msg)
+ return
+ self.xor_check_stacked_rx_one_slave_down()
\ No newline at end of file
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
2019-02-28 6:01 ` [dts] [PATCH V2]pmd_stacked_bonded: upload " yufengmx
@ 2019-02-28 6:03 ` Mo, YufengX
2019-02-28 8:40 ` Chen, Zhaoyan
2019-02-28 11:02 ` Tu, Lijuan
1 sibling, 1 reply; 5+ messages in thread
From: Mo, YufengX @ 2019-02-28 6:03 UTC (permalink / raw)
To: dts; +Cc: Mo, YufengX
Tested-by: Mo, YufengX <yufengx.mo@intel.com>
> -----Original Message-----
> From: Mo, YufengX
> Sent: Thursday, February 28, 2019 2:02 PM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V2]pmd_stacked_bonded: upload automation script
>
>
> This automation script is for pmd stacked bonded feature.
>
> Allow bonded devices to be stacked to allow two or more bonded devices to be
> bonded into one master bonded device
>
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
> tests/TestSuite_pmd_stacked_bonded.py | 531 ++++++++++++++++++++++++++++++++++
> 1 file changed, 531 insertions(+)
> create mode 100644 tests/TestSuite_pmd_stacked_bonded.py
>
> diff --git a/tests/TestSuite_pmd_stacked_bonded.py b/tests/TestSuite_pmd_stacked_bonded.py
> new file mode 100644
> index 0000000..e1ce01a
> --- /dev/null
> +++ b/tests/TestSuite_pmd_stacked_bonded.py
> @@ -0,0 +1,531 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import time
> +import traceback
> +
> +# import dts/framework libs
> +import utils
> +from test_case import TestCase
> +from exception import VerifyFailure
> +
> +# import bonding lib
> +import bonding
> +from bonding import (
> + MODE_ROUND_ROBIN,
> + MODE_ACTIVE_BACKUP,
> + MODE_XOR_BALANCE,
> + MODE_BROADCAST,
> + MODE_LACP,
> + MODE_TLB_BALANCE,
> + MODE_ALB_BALANCE,
> + FRAME_SIZE_64)
> +
> +class TestBondingStacked(TestCase):
> +
> + #
> + # On dut, dpdk bonding
> + #
> + def check_bonded_device_queue_config(self, *devices):
> + '''
> + check if master bonded device/slave device queue configuration
> + is the same.
> + '''
> + # get master bonded device queue configuration
> + master = self.bond_inst.get_port_info(devices[0], 'queue_config')
> + # get slave device queue configuration
> + for port_id in devices[1:]:
> + config = self.bond_inst.get_port_info(port_id, 'queue_config')
> + if cmp(config, master) == 0:
> + continue
> + msg = ("slave bonded port [{0}] is "
> + "different to top bonded port [{1}]").format(
> + port_id, devices[0])
> + raise VerifyFailure('bonded device queue config:: ' + msg)
> +
> + def set_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode,
> + ignore=False):
> + '''
> + set stacked bonded mode for a custom bonding mode
> + '''
> + inst = self.bond_inst
> + socket_id = self.dut.get_numa_id(self.bond_slave)
> + # create first bonded device 1, add slaves in it
> + bond_port_1 = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(bond_port_1, False, '', *slaveGrpOne)
> + # create second bonded device 2, add slaves in it
> + bond_port_2 = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(bond_port_2, False, '', *slaveGrpTwo)
> + # create master bonded device 3, which is the top bonded device
> + master_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> + # add bond bonded device 1 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, '', *[bond_port_1])
> + # add bonded device 2 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, '', *[bond_port_2])
> + # check if master bonding/each slaves queue configuration is the same.
> + if not ignore:
> + self.check_bonded_device_queue_config(*[master_bond_port,
> + bond_port_1, bond_port_2])
> +
> + return [bond_port_1, bond_port_2, master_bond_port]
> +
> + def set_third_stacked_bonded(self, bond_port, bond_mode):
> + '''
> + set third level stacked bonded to check if stacked level can be set
> + more than 2
> + '''
> + inst = self.bond_inst
> + socket_id = self.dut.get_numa_id(self.bond_slave)
> + third_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(third_bond_port, False, '', *[bond_port])
> +
> + def duplicate_add_stacked_bonded(self, bond_port_1, bond_port_2,
> + master_bond_port):
> + '''
> + check if adding duplicate stacked bonded device is forbidden
> + '''
> + inst = self.bond_inst
> + # check exception process
> + expected_str = 'Slave device is already a slave of a bonded device'
> + # add bonded device 1 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, expected_str, *[bond_port_1])
> + # add bonded device 2 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, expected_str, *[bond_port_2])
> +
> + def preset_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode):
> + bond_port_1, bond_port_2, master_bond_port = self.set_stacked_bonded(
> + slaveGrpOne,
> + slaveGrpTwo,
> + bond_mode,
> + ignore=True)
> + portList = [slaveGrpOne[0],
> + slaveGrpTwo[0],
> + bond_port_1,
> + bond_port_2,
> + master_bond_port]
> + cmds = [
> + ["port stop all", ''],
> + ["set portlist " + ",".join([str(port) for port in portList]), ''],
> + ["port start all", ' ', 15]]
> + self.bond_inst.d_console(cmds)
> + # blank space command is used to skip LSC event to avoid core dumped issue
> + time.sleep(5)
> + cmds = [ [' ', ''],
> + ["start", '']]
> + self.bond_inst.d_console(cmds)
> + time.sleep(5)
> +
> + return bond_port_1, bond_port_2, master_bond_port
> +
> + #
> + # packet transmission
> + #
> + def traffic(self, traffic_config, ports):
> + # get ports statistics before sending packets
> + stats_pre = self.bond_inst.get_all_stats(ports)
> + # send packets
> + self.bond_inst.send_packet(traffic_config)
> + # get ports statistics after sending packets
> + stats_post = self.bond_inst.get_all_stats(ports)
> + # calculate ports statistics result
> + for port_id in ports:
> + stats_post[port_id]['RX-packets'] -= stats_pre[port_id]['RX-packets']
> + stats_post[port_id]['TX-packets'] -= stats_pre[port_id]['TX-packets']
> +
> + return stats_post
> +
> + def config_port_traffic(self, tx_port, rx_port, total_pkt):
> + ''' set traffic configuration '''
> + traffic_config = {
> + 'port topo': [tx_port, rx_port],
> + 'stream': self.bond_inst.set_stream_to_slave_port(rx_port),
> + 'traffic configs': {
> + 'count': total_pkt,
> + },}
> +
> + return traffic_config
> +
> + def active_slave_rx(self, slave, bond_port, mode):
> + msg = "send packet to active slave port <{0}>".format(slave)
> + self.logger.info(msg)
> + tx_intf = self.tester.get_interface(
> + self.tester.get_local_port(self.dut_ports[slave]))
> + # get traffic config
> + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> + # select ports for statistics
> + ports = [slave, bond_port]
> + # run traffic
> + stats = self.traffic(traffic_config, ports)
> + # check slave statistics
> + msg = "port <{0}> Data not received by port <{1}>".format(
> + tx_intf, slave)
> + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> + self.verify(stats[slave]['RX-packets'] >= self.total_pkt, msg)
> + msg = "tester port {0} <----> dut port {1} is ok".format(
> + tx_intf, slave)
> + self.logger.info(msg)
> + # check bond port statistics
> + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> + self.verify(stats[slave]['RX-packets'] >= self.total_pkt,
> + "Bond port have error RX packet in XOR")
> +
> + def inactive_slave_rx(self, slave, bond_port, mode):
> + msg = "send packet to inactive slave port <{0}>".format(slave)
> + self.logger.info(msg)
> + tx_intf = self.tester.get_interface(
> + self.tester.get_local_port(self.dut_ports[slave]))
> + # get traffic config
> + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> + # select ports for statistics
> + ports = [slave, bond_port]
> + # run traffic
> + stats = self.traffic(traffic_config, ports)
> + # check slave statistics
> + msg = ("port <{0}> Data received by port <{1}>, "
> + "but should not.").format(tx_intf, slave)
> + self.verify(stats[slave]['RX-packets'] == 0, msg)
> + msg = "tester port {0} <-| |-> dut port {1} is blocked".format(
> + tx_intf, slave)
> + self.logger.info(msg)
> + # check bond port statistics
> + self.verify(stats[slave]['RX-packets'] == 0,
> + "Bond port have error RX packet in {0}".format(mode))
> +
> + def check_traffic_with_one_slave_down(self, mode):
> + """
> + Verify that transmitting packets correctly when set one slave of
> + the bonded device link down.
> + """
> + results = []
> + #-------------------------------
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + try:
> + slaves = {'active' : [], 'inactive' : []}
> + #-------------------------------
> + # preset stacked bonded device
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> + #---------------------------------------------------
> + # set one slave of first bonded device link down
> + primary_slave = slaveGrpOne[0]
> + self.bond_inst.set_dut_port_status(primary_slave, "down")
> + slaves['inactive'].append(primary_slave)
> + # get slave status
> + primary_port, active_slaves = \
> + self.bond_inst.get_active_slaves(bond_port_1)
> + slaves['active'].extend(active_slaves)
> + if primary_slave in slaves['active']:
> + msg = "{0} should not be in active slaves list".format(
> + primary_slave)
> + raise Exception(msg)
> + #---------------------------------------------------
> + # set one slave of second bonded device link down
> + primary_slave = slaveGrpTwo[0]
> + self.bond_inst.set_dut_port_status(primary_slave, "down")
> + slaves['inactive'].append(primary_slave)
> + # check active slaves
> + primary_port_2, active_slaves_2 = \
> + self.bond_inst.get_active_slaves(bond_port_2)
> + slaves['active'].extend(active_slaves_2)
> + if primary_slave in slaves['active']:
> + msg = "{0} should not be in active slaves list".format(
> + primary_slave)
> + raise Exception(msg)
> + # traffic testing
> + # active slave traffic testing
> + for slave in slaves['active']:
> + self.active_slave_rx(slave, master_bond_port, mode)
> + # inactive slave traffic testing
> + for slave in slaves['inactive']:
> + self.inactive_slave_rx(slave, master_bond_port, mode)
> + except Exception as e:
> + results.append(e)
> + self.logger.error(traceback.format_exc())
> + finally:
> + self.bond_inst.close_testpmd()
> +
> + return results
> +
> + def check_traffic(self, mode):
> + """ normal traffic with all slaves are under active status.
> + verify the RX packets are all correct with stacked bonded device.
> + bonded device's statistics should be the sum of slaves statistics.
> + """
> + self.bond_inst.start_testpmd()
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> + results = []
> + # check first bonded device
> + try:
> + self.logger.info('check first bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne:
> + self.active_slave_rx(slave, bond_port_1, mode)
> + except Exception as e:
> + results.append(e)
> + # check second bonded device
> + try:
> + self.logger.info('check second bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne:
> + self.active_slave_rx(slave, bond_port_2, mode)
> + except Exception as e:
> + results.append(e)
> +
> + # check top bonded device
> + try:
> + self.logger.info('check master bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne + slaveGrpTwo:
> + self.active_slave_rx(slave, master_bond_port, mode)
> + except Exception as e:
> + results.append(e)
> +
> + self.bond_inst.close_testpmd()
> +
> + return results
> +
> + def backup_check_traffic(self):
> + mode = MODE_ACTIVE_BACKUP
> + msg = "begin checking bonding backup(stacked) mode transmission"
> + self.logger.info(msg)
> + results = self.check_traffic(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + raise VerifyFailure("backup(stacked) mode: rx failed")
> +
> + def backup_check_traffic_with_slave_down(self):
> + mode = MODE_ACTIVE_BACKUP
> + self.logger.info("begin checking bonding backup(stacked) "
> + "mode transmission with one slave down")
> + results = self.check_traffic_with_one_slave_down(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + msg = "backup(stacked) mode: rx with one slave down failed"
> + raise VerifyFailure(msg)
> +
> + def xor_check_rx(self):
> + mode = MODE_XOR_BALANCE
> + msg = "begin checking bonding xor(stacked) mode transmission"
> + self.logger.info(msg)
> + results = self.check_traffic(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + raise VerifyFailure("xor(stacked) mode: rx failed")
> +
> + def xor_check_stacked_rx_one_slave_down(self):
> + mode = MODE_XOR_BALANCE
> + self.logger.info("begin checking bonding xor(stacked) mode "
> + "transmission with one slave down")
> + results = self.check_traffic_with_one_slave_down(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + msg = "xor(stacked) mode: rx with one slave down failed"
> + raise VerifyFailure(msg)
> + #
> + # Test cases.
> + #
> + def set_up_all(self):
> + """
> + Run before each test suite
> + """
> + self.verify('bsdapp' not in self.target, "Bonding not support freebsd")
> + self.dut_ports = self.dut.get_ports()
> + num_ports = len(self.dut_ports)
> + self.verify(num_ports == 2 or num_ports == 4, "Insufficient ports")
> + # separate ports into two group as first level bond ports' slaves
> + sep_index = len(self.dut_ports)/2
> + self.slaveGrpOne = self.dut_ports[:sep_index]
> + self.slaveGrpTwo = self.dut_ports[sep_index:]
> + self.bond_slave = self.dut_ports[0]
> + # initialize bonding common methods name
> + self.total_pkt = 100
> + config = {
> + 'parent': self,
> + 'pkt_name': 'udp',
> + 'pkt_size': FRAME_SIZE_64,
> + 'src_mac': '52:00:00:00:00:03',
> + 'src_ip': '10.239.129.65',
> + 'src_port': 61,
> + 'dst_ip': '10.239.129.88',
> + 'dst_port': 53,}
> + self.bond_inst = bonding.PmdBonding(**config)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> +
> + def test_basic_behav(self):
> + '''
> + allow a bonded device to be added to another bonded device.
> + There's two limitations to create master bonding:
> +
> + - Total depth of nesting is limited to two levels,
> + - 802.3ad mode is not supported if one or more slaves is a bond device
> +
> + note: There 802.3ad mode can not be supported on this bond device.
> +
> + This case is aimed at testing basic behavior of stacked bonded commands.
> +
> + '''
> + #------------------------------------------------
> + # check stacked bonded status, except mode 4 (802.3ad)
> + mode_list =[MODE_ROUND_ROBIN,
> + MODE_ACTIVE_BACKUP,
> + MODE_XOR_BALANCE,
> + MODE_BROADCAST,
> + MODE_TLB_BALANCE,
> + MODE_ALB_BALANCE]
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + check_result = []
> + for bond_mode in mode_list:
> + self.logger.info("begin mode <{0}> checking".format(bond_mode))
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + try:
> + self.logger.info("check bonding mode <{0}>".format(bond_mode))
> + # set up stacked bonded status
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, bond_mode)
> + # check duplicate add slave
> + self.duplicate_add_stacked_bonded(bond_port_1, bond_port_2,
> + master_bond_port)
> + # check stacked limitation
> + self.set_third_stacked_bonded(master_bond_port, bond_mode)
> + # quit testpmd, it is not supported to reset testpmd
> + self.logger.info("mode <{0}> done !".format(bond_mode))
> + check_result.append([bond_mode, None])
> + except Exception as e:
> + check_result.append([bond_mode, e])
> + self.logger.error(e)
> + finally:
> + self.bond_inst.close_testpmd()
> + time.sleep(5)
> + #------------------------------------------------
> + # 802.3ad mode is not supported
> + # if one or more slaves is a bond device
> + # so it should raise a exception
> + msg = ''
> + try:
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + # set up stacked bonded status
> + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, MODE_LACP)
> + # quit testpmd, it is not supported to reset testpmd
> + msg = ("802.3ad mode hasn't been forbidden to "
> + "use stacked bonded setting")
> + check_result.append([MODE_LACP, msg])
> + except Exception as e:
> + check_result.append([MODE_LACP, None])
> + finally:
> + self.bond_inst.close_testpmd()
> +
> + exception_flag = False
> + for bond_mode, e in check_result:
> + msg = "mode <{0}>".format(bond_mode)
> + if e:
> + self.logger.info(msg)
> + self.logger.error(e)
> + exception_flag = True
> + else:
> + self.logger.info(msg + ' done !')
> + # if some checking item is failed, raise exception
> + if exception_flag:
> + raise VerifyFailure('some test items failed')
> + else:
> + self.logger.info('all test items have done !')
> +
> + def test_mode_backup_rx(self):
> + """
> + Verify receive packets correctly in the active-backup(stacked) mode.
> + """
> + self.backup_check_traffic()
> +
> + def test_mode_backup_one_slave_down(self):
> + """
> + Verify that receive packets correctly in the active-backup(stacked) mode
> + when bringing any one slave of the bonding device link down.
> + """
> + slave_down_port_limit = 4
> + if len(self.dut_ports) < slave_down_port_limit:
> + msg = ("ports less than {0}, "
> + "ignore stacked one slave down check").format(
> + slave_down_port_limit)
> + self.logger.warning(msg)
> + return
> + self.backup_check_traffic_with_slave_down()
> +
> + def test_mode_xor_rx(self):
> + """
> + Verify that receive packets correctly in the XOR(stacked) mode.
> + """
> + self.xor_check_rx()
> +
> + def test_mode_xor_rx_one_slave_down(self):
> + """
> + Verify that receive packets correctly in the XOR(stacked) mode when
> + bringing any one slave of the bonding device link down.
> + """
> + slave_down_port_limit = 4
> + if len(self.dut_ports) < slave_down_port_limit:
> + msg = ("ports less than {0}, "
> + "ignore stacked one slave down check").format(
> + slave_down_port_limit)
> + self.logger.warning(msg)
> + return
> + self.xor_check_stacked_rx_one_slave_down()
> \ No newline at end of file
> --
> 1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
2019-02-28 6:03 ` Mo, YufengX
@ 2019-02-28 8:40 ` Chen, Zhaoyan
0 siblings, 0 replies; 5+ messages in thread
From: Chen, Zhaoyan @ 2019-02-28 8:40 UTC (permalink / raw)
To: Mo, YufengX, dts; +Cc: Mo, YufengX, Chen, Zhaoyan
Acked-by: Chen, Zhaoyan <zhaoyan.chen@intel.com>
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Mo, YufengX
> Sent: Thursday, February 28, 2019 2:03 PM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: Re: [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
>
>
>
> Tested-by: Mo, YufengX <yufengx.mo@intel.com>
>
> > -----Original Message-----
> > From: Mo, YufengX
> > Sent: Thursday, February 28, 2019 2:02 PM
> > To: dts@dpdk.org
> > Cc: Mo, YufengX <yufengx.mo@intel.com>
> > Subject: [dts][PATCH V2]pmd_stacked_bonded: upload automation script
> >
> >
> > This automation script is for pmd stacked bonded feature.
> >
> > Allow bonded devices to be stacked to allow two or more bonded devices
> > to be bonded into one master bonded device
> >
> > Signed-off-by: yufengmx <yufengx.mo@intel.com>
> > ---
> > tests/TestSuite_pmd_stacked_bonded.py | 531
> > ++++++++++++++++++++++++++++++++++
> > 1 file changed, 531 insertions(+)
> > create mode 100644 tests/TestSuite_pmd_stacked_bonded.py
> >
> > diff --git a/tests/TestSuite_pmd_stacked_bonded.py
> > b/tests/TestSuite_pmd_stacked_bonded.py
> > new file mode 100644
> > index 0000000..e1ce01a
> > --- /dev/null
> > +++ b/tests/TestSuite_pmd_stacked_bonded.py
> > @@ -0,0 +1,531 @@
> > +# BSD LICENSE
> > +#
> > +# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
> > +# All rights reserved.
> > +#
> > +# Redistribution and use in source and binary forms, with or without
> > +# modification, are permitted provided that the following conditions
> > +# are met:
> > +#
> > +# * Redistributions of source code must retain the above copyright
> > +# notice, this list of conditions and the following disclaimer.
> > +# * Redistributions in binary form must reproduce the above copyright
> > +# notice, this list of conditions and the following disclaimer in
> > +# the documentation and/or other materials provided with the
> > +# distribution.
> > +# * Neither the name of Intel Corporation nor the names of its
> > +# contributors may be used to endorse or promote products derived
> > +# from this software without specific prior written permission.
> > +#
> > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT #
> > +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > +COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> > +INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > +(INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> > +SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > +HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> > +STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE)
> > +ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +import time
> > +import traceback
> > +
> > +# import dts/framework libs
> > +import utils
> > +from test_case import TestCase
> > +from exception import VerifyFailure
> > +
> > +# import bonding lib
> > +import bonding
> > +from bonding import (
> > + MODE_ROUND_ROBIN,
> > + MODE_ACTIVE_BACKUP,
> > + MODE_XOR_BALANCE,
> > + MODE_BROADCAST,
> > + MODE_LACP,
> > + MODE_TLB_BALANCE,
> > + MODE_ALB_BALANCE,
> > + FRAME_SIZE_64)
> > +
> > +class TestBondingStacked(TestCase):
> > +
> > + #
> > + # On dut, dpdk bonding
> > + #
> > + def check_bonded_device_queue_config(self, *devices):
> > + '''
> > + check if master bonded device/slave device queue configuration
> > + is the same.
> > + '''
> > + # get master bonded device queue configuration
> > + master = self.bond_inst.get_port_info(devices[0], 'queue_config')
> > + # get slave device queue configuration
> > + for port_id in devices[1:]:
> > + config = self.bond_inst.get_port_info(port_id, 'queue_config')
> > + if cmp(config, master) == 0:
> > + continue
> > + msg = ("slave bonded port [{0}] is "
> > + "different to top bonded port [{1}]").format(
> > + port_id, devices[0])
> > + raise VerifyFailure('bonded device queue config:: ' +
> > + msg)
> > +
> > + def set_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode,
> > + ignore=False):
> > + '''
> > + set stacked bonded mode for a custom bonding mode
> > + '''
> > + inst = self.bond_inst
> > + socket_id = self.dut.get_numa_id(self.bond_slave)
> > + # create first bonded device 1, add slaves in it
> > + bond_port_1 = inst.create_bonded_device(bond_mode, socket_id)
> > + inst.add_slave(bond_port_1, False, '', *slaveGrpOne)
> > + # create second bonded device 2, add slaves in it
> > + bond_port_2 = inst.create_bonded_device(bond_mode, socket_id)
> > + inst.add_slave(bond_port_2, False, '', *slaveGrpTwo)
> > + # create master bonded device 3, which is the top bonded device
> > + master_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> > + # add bond bonded device 1 to bonded device 3
> > + # check bonding config status
> > + inst.add_slave(master_bond_port, False, '', *[bond_port_1])
> > + # add bonded device 2 to bonded device 3
> > + # check bonding config status
> > + inst.add_slave(master_bond_port, False, '', *[bond_port_2])
> > + # check if master bonding/each slaves queue configuration is the same.
> > + if not ignore:
> > + self.check_bonded_device_queue_config(*[master_bond_port,
> > + bond_port_1,
> > + bond_port_2])
> > +
> > + return [bond_port_1, bond_port_2, master_bond_port]
> > +
> > + def set_third_stacked_bonded(self, bond_port, bond_mode):
> > + '''
> > + set third level stacked bonded to check if stacked level can be set
> > + more than 2
> > + '''
> > + inst = self.bond_inst
> > + socket_id = self.dut.get_numa_id(self.bond_slave)
> > + third_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> > + inst.add_slave(third_bond_port, False, '', *[bond_port])
> > +
> > + def duplicate_add_stacked_bonded(self, bond_port_1, bond_port_2,
> > + master_bond_port):
> > + '''
> > + check if adding duplicate stacked bonded device is forbidden
> > + '''
> > + inst = self.bond_inst
> > + # check exception process
> > + expected_str = 'Slave device is already a slave of a bonded device'
> > + # add bonded device 1 to bonded device 3
> > + # check bonding config status
> > + inst.add_slave(master_bond_port, False, expected_str, *[bond_port_1])
> > + # add bonded device 2 to bonded device 3
> > + # check bonding config status
> > + inst.add_slave(master_bond_port, False, expected_str,
> > + *[bond_port_2])
> > +
> > + def preset_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode):
> > + bond_port_1, bond_port_2, master_bond_port = self.set_stacked_bonded(
> > + slaveGrpOne,
> > + slaveGrpTwo,
> > + bond_mode,
> > + ignore=True)
> > + portList = [slaveGrpOne[0],
> > + slaveGrpTwo[0],
> > + bond_port_1,
> > + bond_port_2,
> > + master_bond_port]
> > + cmds = [
> > + ["port stop all", ''],
> > + ["set portlist " + ",".join([str(port) for port in portList]), ''],
> > + ["port start all", ' ', 15]]
> > + self.bond_inst.d_console(cmds)
> > + # blank space command is used to skip LSC event to avoid core dumped
> issue
> > + time.sleep(5)
> > + cmds = [ [' ', ''],
> > + ["start", '']]
> > + self.bond_inst.d_console(cmds)
> > + time.sleep(5)
> > +
> > + return bond_port_1, bond_port_2, master_bond_port
> > +
> > + #
> > + # packet transmission
> > + #
> > + def traffic(self, traffic_config, ports):
> > + # get ports statistics before sending packets
> > + stats_pre = self.bond_inst.get_all_stats(ports)
> > + # send packets
> > + self.bond_inst.send_packet(traffic_config)
> > + # get ports statistics after sending packets
> > + stats_post = self.bond_inst.get_all_stats(ports)
> > + # calculate ports statistics result
> > + for port_id in ports:
> > + stats_post[port_id]['RX-packets'] -= stats_pre[port_id]['RX-packets']
> > + stats_post[port_id]['TX-packets'] -=
> > + stats_pre[port_id]['TX-packets']
> > +
> > + return stats_post
> > +
> > + def config_port_traffic(self, tx_port, rx_port, total_pkt):
> > + ''' set traffic configuration '''
> > + traffic_config = {
> > + 'port topo': [tx_port, rx_port],
> > + 'stream': self.bond_inst.set_stream_to_slave_port(rx_port),
> > + 'traffic configs': {
> > + 'count': total_pkt,
> > + },}
> > +
> > + return traffic_config
> > +
> > + def active_slave_rx(self, slave, bond_port, mode):
> > + msg = "send packet to active slave port <{0}>".format(slave)
> > + self.logger.info(msg)
> > + tx_intf = self.tester.get_interface(
> > + self.tester.get_local_port(self.dut_ports[slave]))
> > + # get traffic config
> > + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> > + # select ports for statistics
> > + ports = [slave, bond_port]
> > + # run traffic
> > + stats = self.traffic(traffic_config, ports)
> > + # check slave statistics
> > + msg = "port <{0}> Data not received by port <{1}>".format(
> > + tx_intf, slave)
> > + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> > + self.verify(stats[slave]['RX-packets'] >= self.total_pkt, msg)
> > + msg = "tester port {0} <----> dut port {1} is ok".format(
> > + tx_intf, slave)
> > + self.logger.info(msg)
> > + # check bond port statistics
> > + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> > + self.verify(stats[slave]['RX-packets'] >= self.total_pkt,
> > + "Bond port have error RX packet in XOR")
> > +
> > + def inactive_slave_rx(self, slave, bond_port, mode):
> > + msg = "send packet to inactive slave port <{0}>".format(slave)
> > + self.logger.info(msg)
> > + tx_intf = self.tester.get_interface(
> > + self.tester.get_local_port(self.dut_ports[slave]))
> > + # get traffic config
> > + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> > + # select ports for statistics
> > + ports = [slave, bond_port]
> > + # run traffic
> > + stats = self.traffic(traffic_config, ports)
> > + # check slave statistics
> > + msg = ("port <{0}> Data received by port <{1}>, "
> > + "but should not.").format(tx_intf, slave)
> > + self.verify(stats[slave]['RX-packets'] == 0, msg)
> > + msg = "tester port {0} <-| |-> dut port {1} is blocked".format(
> > + tx_intf, slave)
> > + self.logger.info(msg)
> > + # check bond port statistics
> > + self.verify(stats[slave]['RX-packets'] == 0,
> > + "Bond port have error RX packet in
> > + {0}".format(mode))
> > +
> > + def check_traffic_with_one_slave_down(self, mode):
> > + """
> > + Verify that transmitting packets correctly when set one slave of
> > + the bonded device link down.
> > + """
> > + results = []
> > + #-------------------------------
> > + # boot up testpmd
> > + self.bond_inst.start_testpmd()
> > + try:
> > + slaves = {'active' : [], 'inactive' : []}
> > + #-------------------------------
> > + # preset stacked bonded device
> > + slaveGrpOne = self.slaveGrpOne
> > + slaveGrpTwo = self.slaveGrpTwo
> > + bond_port_1, bond_port_2, master_bond_port = \
> > + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> > + #---------------------------------------------------
> > + # set one slave of first bonded device link down
> > + primary_slave = slaveGrpOne[0]
> > + self.bond_inst.set_dut_port_status(primary_slave, "down")
> > + slaves['inactive'].append(primary_slave)
> > + # get slave status
> > + primary_port, active_slaves = \
> > + self.bond_inst.get_active_slaves(bond_port_1)
> > + slaves['active'].extend(active_slaves)
> > + if primary_slave in slaves['active']:
> > + msg = "{0} should not be in active slaves list".format(
> > + primary_slave)
> > + raise Exception(msg)
> > + #---------------------------------------------------
> > + # set one slave of second bonded device link down
> > + primary_slave = slaveGrpTwo[0]
> > + self.bond_inst.set_dut_port_status(primary_slave, "down")
> > + slaves['inactive'].append(primary_slave)
> > + # check active slaves
> > + primary_port_2, active_slaves_2 = \
> > + self.bond_inst.get_active_slaves(bond_port_2)
> > + slaves['active'].extend(active_slaves_2)
> > + if primary_slave in slaves['active']:
> > + msg = "{0} should not be in active slaves list".format(
> > + primary_slave)
> > + raise Exception(msg)
> > + # traffic testing
> > + # active slave traffic testing
> > + for slave in slaves['active']:
> > + self.active_slave_rx(slave, master_bond_port, mode)
> > + # inactive slave traffic testing
> > + for slave in slaves['inactive']:
> > + self.inactive_slave_rx(slave, master_bond_port, mode)
> > + except Exception as e:
> > + results.append(e)
> > + self.logger.error(traceback.format_exc())
> > + finally:
> > + self.bond_inst.close_testpmd()
> > +
> > + return results
> > +
> > + def check_traffic(self, mode):
> > + """ normal traffic with all slaves are under active status.
> > + verify the RX packets are all correct with stacked bonded device.
> > + bonded device's statistics should be the sum of slaves statistics.
> > + """
> > + self.bond_inst.start_testpmd()
> > + slaveGrpOne = self.slaveGrpOne
> > + slaveGrpTwo = self.slaveGrpTwo
> > + bond_port_1, bond_port_2, master_bond_port = \
> > + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> > + results = []
> > + # check first bonded device
> > + try:
> > + self.logger.info('check first bonded device')
> > + # active slave traffic testing
> > + for slave in slaveGrpOne:
> > + self.active_slave_rx(slave, bond_port_1, mode)
> > + except Exception as e:
> > + results.append(e)
> > + # check second bonded device
> > + try:
> > + self.logger.info('check second bonded device')
> > + # active slave traffic testing
> > + for slave in slaveGrpOne:
> > + self.active_slave_rx(slave, bond_port_2, mode)
> > + except Exception as e:
> > + results.append(e)
> > +
> > + # check top bonded device
> > + try:
> > + self.logger.info('check master bonded device')
> > + # active slave traffic testing
> > + for slave in slaveGrpOne + slaveGrpTwo:
> > + self.active_slave_rx(slave, master_bond_port, mode)
> > + except Exception as e:
> > + results.append(e)
> > +
> > + self.bond_inst.close_testpmd()
> > +
> > + return results
> > +
> > + def backup_check_traffic(self):
> > + mode = MODE_ACTIVE_BACKUP
> > + msg = "begin checking bonding backup(stacked) mode transmission"
> > + self.logger.info(msg)
> > + results = self.check_traffic(mode)
> > + if results:
> > + for item in results:
> > + self.logger.error(item)
> > + raise VerifyFailure("backup(stacked) mode: rx failed")
> > +
> > + def backup_check_traffic_with_slave_down(self):
> > + mode = MODE_ACTIVE_BACKUP
> > + self.logger.info("begin checking bonding backup(stacked) "
> > + "mode transmission with one slave down")
> > + results = self.check_traffic_with_one_slave_down(mode)
> > + if results:
> > + for item in results:
> > + self.logger.error(item)
> > + msg = "backup(stacked) mode: rx with one slave down failed"
> > + raise VerifyFailure(msg)
> > +
> > + def xor_check_rx(self):
> > + mode = MODE_XOR_BALANCE
> > + msg = "begin checking bonding xor(stacked) mode transmission"
> > + self.logger.info(msg)
> > + results = self.check_traffic(mode)
> > + if results:
> > + for item in results:
> > + self.logger.error(item)
> > + raise VerifyFailure("xor(stacked) mode: rx failed")
> > +
> > + def xor_check_stacked_rx_one_slave_down(self):
> > + mode = MODE_XOR_BALANCE
> > + self.logger.info("begin checking bonding xor(stacked) mode "
> > + "transmission with one slave down")
> > + results = self.check_traffic_with_one_slave_down(mode)
> > + if results:
> > + for item in results:
> > + self.logger.error(item)
> > + msg = "xor(stacked) mode: rx with one slave down failed"
> > + raise VerifyFailure(msg)
> > + #
> > + # Test cases.
> > + #
> > + def set_up_all(self):
> > + """
> > + Run before each test suite
> > + """
> > + self.verify('bsdapp' not in self.target, "Bonding not support freebsd")
> > + self.dut_ports = self.dut.get_ports()
> > + num_ports = len(self.dut_ports)
> > + self.verify(num_ports == 2 or num_ports == 4, "Insufficient ports")
> > + # separate ports into two group as first level bond ports' slaves
> > + sep_index = len(self.dut_ports)/2
> > + self.slaveGrpOne = self.dut_ports[:sep_index]
> > + self.slaveGrpTwo = self.dut_ports[sep_index:]
> > + self.bond_slave = self.dut_ports[0]
> > + # initialize bonding common methods name
> > + self.total_pkt = 100
> > + config = {
> > + 'parent': self,
> > + 'pkt_name': 'udp',
> > + 'pkt_size': FRAME_SIZE_64,
> > + 'src_mac': '52:00:00:00:00:03',
> > + 'src_ip': '10.239.129.65',
> > + 'src_port': 61,
> > + 'dst_ip': '10.239.129.88',
> > + 'dst_port': 53,}
> > + self.bond_inst = bonding.PmdBonding(**config)
> > +
> > + def tear_down_all(self):
> > + """
> > + Run after each test suite.
> > + """
> > + pass
> > +
> > + def set_up(self):
> > + """
> > + Run before each test case.
> > + """
> > + pass
> > +
> > + def tear_down(self):
> > + """
> > + Run after each test case.
> > + """
> > +
> > + def test_basic_behav(self):
> > + '''
> > + allow a bonded device to be added to another bonded device.
> > + There's two limitations to create master bonding:
> > +
> > + - Total depth of nesting is limited to two levels,
> > + - 802.3ad mode is not supported if one or more slaves is a
> > + bond device
> > +
> > + note: There 802.3ad mode can not be supported on this bond device.
> > +
> > + This case is aimed at testing basic behavior of stacked bonded commands.
> > +
> > + '''
> > + #------------------------------------------------
> > + # check stacked bonded status, except mode 4 (802.3ad)
> > + mode_list =[MODE_ROUND_ROBIN,
> > + MODE_ACTIVE_BACKUP,
> > + MODE_XOR_BALANCE,
> > + MODE_BROADCAST,
> > + MODE_TLB_BALANCE,
> > + MODE_ALB_BALANCE]
> > + slaveGrpOne = self.slaveGrpOne
> > + slaveGrpTwo = self.slaveGrpTwo
> > + check_result = []
> > + for bond_mode in mode_list:
> > + self.logger.info("begin mode <{0}> checking".format(bond_mode))
> > + # boot up testpmd
> > + self.bond_inst.start_testpmd()
> > + try:
> > + self.logger.info("check bonding mode <{0}>".format(bond_mode))
> > + # set up stacked bonded status
> > + bond_port_1, bond_port_2, master_bond_port = \
> > + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, bond_mode)
> > + # check duplicate add slave
> > + self.duplicate_add_stacked_bonded(bond_port_1, bond_port_2,
> > + master_bond_port)
> > + # check stacked limitation
> > + self.set_third_stacked_bonded(master_bond_port, bond_mode)
> > + # quit testpmd, it is not supported to reset testpmd
> > + self.logger.info("mode <{0}> done !".format(bond_mode))
> > + check_result.append([bond_mode, None])
> > + except Exception as e:
> > + check_result.append([bond_mode, e])
> > + self.logger.error(e)
> > + finally:
> > + self.bond_inst.close_testpmd()
> > + time.sleep(5)
> > + #------------------------------------------------
> > + # 802.3ad mode is not supported
> > + # if one or more slaves is a bond device
> > + # so it should raise a exception
> > + msg = ''
> > + try:
> > + # boot up testpmd
> > + self.bond_inst.start_testpmd()
> > + # set up stacked bonded status
> > + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, MODE_LACP)
> > + # quit testpmd, it is not supported to reset testpmd
> > + msg = ("802.3ad mode hasn't been forbidden to "
> > + "use stacked bonded setting")
> > + check_result.append([MODE_LACP, msg])
> > + except Exception as e:
> > + check_result.append([MODE_LACP, None])
> > + finally:
> > + self.bond_inst.close_testpmd()
> > +
> > + exception_flag = False
> > + for bond_mode, e in check_result:
> > + msg = "mode <{0}>".format(bond_mode)
> > + if e:
> > + self.logger.info(msg)
> > + self.logger.error(e)
> > + exception_flag = True
> > + else:
> > + self.logger.info(msg + ' done !')
> > + # if some checking item is failed, raise exception
> > + if exception_flag:
> > + raise VerifyFailure('some test items failed')
> > + else:
> > + self.logger.info('all test items have done !')
> > +
> > + def test_mode_backup_rx(self):
> > + """
> > + Verify receive packets correctly in the active-backup(stacked) mode.
> > + """
> > + self.backup_check_traffic()
> > +
> > + def test_mode_backup_one_slave_down(self):
> > + """
> > + Verify that receive packets correctly in the active-backup(stacked) mode
> > + when bringing any one slave of the bonding device link down.
> > + """
> > + slave_down_port_limit = 4
> > + if len(self.dut_ports) < slave_down_port_limit:
> > + msg = ("ports less than {0}, "
> > + "ignore stacked one slave down check").format(
> > + slave_down_port_limit)
> > + self.logger.warning(msg)
> > + return
> > + self.backup_check_traffic_with_slave_down()
> > +
> > + def test_mode_xor_rx(self):
> > + """
> > + Verify that receive packets correctly in the XOR(stacked) mode.
> > + """
> > + self.xor_check_rx()
> > +
> > + def test_mode_xor_rx_one_slave_down(self):
> > + """
> > + Verify that receive packets correctly in the XOR(stacked) mode when
> > + bringing any one slave of the bonding device link down.
> > + """
> > + slave_down_port_limit = 4
> > + if len(self.dut_ports) < slave_down_port_limit:
> > + msg = ("ports less than {0}, "
> > + "ignore stacked one slave down check").format(
> > + slave_down_port_limit)
> > + self.logger.warning(msg)
> > + return
> > + self.xor_check_stacked_rx_one_slave_down()
> > \ No newline at end of file
> > --
> > 1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
2019-02-28 6:01 ` [dts] [PATCH V2]pmd_stacked_bonded: upload " yufengmx
2019-02-28 6:03 ` Mo, YufengX
@ 2019-02-28 11:02 ` Tu, Lijuan
1 sibling, 0 replies; 5+ messages in thread
From: Tu, Lijuan @ 2019-02-28 11:02 UTC (permalink / raw)
To: Mo, YufengX, dts; +Cc: Mo, YufengX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: Thursday, February 28, 2019 2:02 PM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V2]pmd_stacked_bonded: upload automation script
>
>
> This automation script is for pmd stacked bonded feature.
>
> Allow bonded devices to be stacked to allow two or more bonded devices to be
> bonded into one master bonded device
>
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
> tests/TestSuite_pmd_stacked_bonded.py | 531
> ++++++++++++++++++++++++++++++++++
> 1 file changed, 531 insertions(+)
> create mode 100644 tests/TestSuite_pmd_stacked_bonded.py
>
> diff --git a/tests/TestSuite_pmd_stacked_bonded.py
> b/tests/TestSuite_pmd_stacked_bonded.py
> new file mode 100644
> index 0000000..e1ce01a
> --- /dev/null
> +++ b/tests/TestSuite_pmd_stacked_bonded.py
> @@ -0,0 +1,531 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import time
> +import traceback
> +
> +# import dts/framework libs
> +import utils
> +from test_case import TestCase
> +from exception import VerifyFailure
> +
> +# import bonding lib
> +import bonding
> +from bonding import (
> + MODE_ROUND_ROBIN,
> + MODE_ACTIVE_BACKUP,
> + MODE_XOR_BALANCE,
> + MODE_BROADCAST,
> + MODE_LACP,
> + MODE_TLB_BALANCE,
> + MODE_ALB_BALANCE,
> + FRAME_SIZE_64)
> +
> +class TestBondingStacked(TestCase):
> +
> + #
> + # On dut, dpdk bonding
> + #
> + def check_bonded_device_queue_config(self, *devices):
> + '''
> + check if master bonded device/slave device queue configuration
> + is the same.
> + '''
> + # get master bonded device queue configuration
> + master = self.bond_inst.get_port_info(devices[0], 'queue_config')
> + # get slave device queue configuration
> + for port_id in devices[1:]:
> + config = self.bond_inst.get_port_info(port_id, 'queue_config')
> + if cmp(config, master) == 0:
> + continue
> + msg = ("slave bonded port [{0}] is "
> + "different to top bonded port [{1}]").format(
> + port_id, devices[0])
> + raise VerifyFailure('bonded device queue config:: ' + msg)
> +
> + def set_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode,
> + ignore=False):
> + '''
> + set stacked bonded mode for a custom bonding mode
> + '''
> + inst = self.bond_inst
> + socket_id = self.dut.get_numa_id(self.bond_slave)
> + # create first bonded device 1, add slaves in it
> + bond_port_1 = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(bond_port_1, False, '', *slaveGrpOne)
> + # create second bonded device 2, add slaves in it
> + bond_port_2 = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(bond_port_2, False, '', *slaveGrpTwo)
> + # create master bonded device 3, which is the top bonded device
> + master_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> + # add bond bonded device 1 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, '', *[bond_port_1])
> + # add bonded device 2 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, '', *[bond_port_2])
> + # check if master bonding/each slaves queue configuration is the same.
> + if not ignore:
> + self.check_bonded_device_queue_config(*[master_bond_port,
> + bond_port_1,
> + bond_port_2])
> +
> + return [bond_port_1, bond_port_2, master_bond_port]
> +
> + def set_third_stacked_bonded(self, bond_port, bond_mode):
> + '''
> + set third level stacked bonded to check if stacked level can be set
> + more than 2
> + '''
> + inst = self.bond_inst
> + socket_id = self.dut.get_numa_id(self.bond_slave)
> + third_bond_port = inst.create_bonded_device(bond_mode, socket_id)
> + inst.add_slave(third_bond_port, False, '', *[bond_port])
> +
> + def duplicate_add_stacked_bonded(self, bond_port_1, bond_port_2,
> + master_bond_port):
> + '''
> + check if adding duplicate stacked bonded device is forbidden
> + '''
> + inst = self.bond_inst
> + # check exception process
> + expected_str = 'Slave device is already a slave of a bonded device'
> + # add bonded device 1 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, expected_str, *[bond_port_1])
> + # add bonded device 2 to bonded device 3
> + # check bonding config status
> + inst.add_slave(master_bond_port, False, expected_str,
> + *[bond_port_2])
> +
> + def preset_stacked_bonded(self, slaveGrpOne, slaveGrpTwo, bond_mode):
> + bond_port_1, bond_port_2, master_bond_port =
> self.set_stacked_bonded(
> + slaveGrpOne,
> + slaveGrpTwo,
> + bond_mode,
> + ignore=True)
> + portList = [slaveGrpOne[0],
> + slaveGrpTwo[0],
> + bond_port_1,
> + bond_port_2,
> + master_bond_port]
> + cmds = [
> + ["port stop all", ''],
> + ["set portlist " + ",".join([str(port) for port in portList]), ''],
> + ["port start all", ' ', 15]]
> + self.bond_inst.d_console(cmds)
> + # blank space command is used to skip LSC event to avoid core dumped
> issue
> + time.sleep(5)
> + cmds = [ [' ', ''],
> + ["start", '']]
> + self.bond_inst.d_console(cmds)
> + time.sleep(5)
> +
> + return bond_port_1, bond_port_2, master_bond_port
> +
> + #
> + # packet transmission
> + #
> + def traffic(self, traffic_config, ports):
> + # get ports statistics before sending packets
> + stats_pre = self.bond_inst.get_all_stats(ports)
> + # send packets
> + self.bond_inst.send_packet(traffic_config)
> + # get ports statistics after sending packets
> + stats_post = self.bond_inst.get_all_stats(ports)
> + # calculate ports statistics result
> + for port_id in ports:
> + stats_post[port_id]['RX-packets'] -= stats_pre[port_id]['RX-packets']
> + stats_post[port_id]['TX-packets'] -=
> + stats_pre[port_id]['TX-packets']
> +
> + return stats_post
> +
> + def config_port_traffic(self, tx_port, rx_port, total_pkt):
> + ''' set traffic configuration '''
> + traffic_config = {
> + 'port topo': [tx_port, rx_port],
> + 'stream': self.bond_inst.set_stream_to_slave_port(rx_port),
> + 'traffic configs': {
> + 'count': total_pkt,
> + },}
> +
> + return traffic_config
> +
> + def active_slave_rx(self, slave, bond_port, mode):
> + msg = "send packet to active slave port <{0}>".format(slave)
> + self.logger.info(msg)
> + tx_intf = self.tester.get_interface(
> + self.tester.get_local_port(self.dut_ports[slave]))
> + # get traffic config
> + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> + # select ports for statistics
> + ports = [slave, bond_port]
> + # run traffic
> + stats = self.traffic(traffic_config, ports)
> + # check slave statistics
> + msg = "port <{0}> Data not received by port <{1}>".format(
> + tx_intf, slave)
> + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> + self.verify(stats[slave]['RX-packets'] >= self.total_pkt, msg)
> + msg = "tester port {0} <----> dut port {1} is ok".format(
> + tx_intf, slave)
> + self.logger.info(msg)
> + # check bond port statistics
> + # here using `>=` to ignore some miscellaneous packets, e.g. lldp
> + self.verify(stats[slave]['RX-packets'] >= self.total_pkt,
> + "Bond port have error RX packet in XOR")
> +
> + def inactive_slave_rx(self, slave, bond_port, mode):
> + msg = "send packet to inactive slave port <{0}>".format(slave)
> + self.logger.info(msg)
> + tx_intf = self.tester.get_interface(
> + self.tester.get_local_port(self.dut_ports[slave]))
> + # get traffic config
> + traffic_config = self.config_port_traffic(tx_intf, slave,self.total_pkt)
> + # select ports for statistics
> + ports = [slave, bond_port]
> + # run traffic
> + stats = self.traffic(traffic_config, ports)
> + # check slave statistics
> + msg = ("port <{0}> Data received by port <{1}>, "
> + "but should not.").format(tx_intf, slave)
> + self.verify(stats[slave]['RX-packets'] == 0, msg)
> + msg = "tester port {0} <-| |-> dut port {1} is blocked".format(
> + tx_intf, slave)
> + self.logger.info(msg)
> + # check bond port statistics
> + self.verify(stats[slave]['RX-packets'] == 0,
> + "Bond port have error RX packet in
> + {0}".format(mode))
> +
> + def check_traffic_with_one_slave_down(self, mode):
> + """
> + Verify that transmitting packets correctly when set one slave of
> + the bonded device link down.
> + """
> + results = []
> + #-------------------------------
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + try:
> + slaves = {'active' : [], 'inactive' : []}
> + #-------------------------------
> + # preset stacked bonded device
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> + #---------------------------------------------------
> + # set one slave of first bonded device link down
> + primary_slave = slaveGrpOne[0]
> + self.bond_inst.set_dut_port_status(primary_slave, "down")
> + slaves['inactive'].append(primary_slave)
> + # get slave status
> + primary_port, active_slaves = \
> + self.bond_inst.get_active_slaves(bond_port_1)
> + slaves['active'].extend(active_slaves)
> + if primary_slave in slaves['active']:
> + msg = "{0} should not be in active slaves list".format(
> + primary_slave)
> + raise Exception(msg)
> + #---------------------------------------------------
> + # set one slave of second bonded device link down
> + primary_slave = slaveGrpTwo[0]
> + self.bond_inst.set_dut_port_status(primary_slave, "down")
> + slaves['inactive'].append(primary_slave)
> + # check active slaves
> + primary_port_2, active_slaves_2 = \
> + self.bond_inst.get_active_slaves(bond_port_2)
> + slaves['active'].extend(active_slaves_2)
> + if primary_slave in slaves['active']:
> + msg = "{0} should not be in active slaves list".format(
> + primary_slave)
> + raise Exception(msg)
> + # traffic testing
> + # active slave traffic testing
> + for slave in slaves['active']:
> + self.active_slave_rx(slave, master_bond_port, mode)
> + # inactive slave traffic testing
> + for slave in slaves['inactive']:
> + self.inactive_slave_rx(slave, master_bond_port, mode)
> + except Exception as e:
> + results.append(e)
> + self.logger.error(traceback.format_exc())
> + finally:
> + self.bond_inst.close_testpmd()
> +
> + return results
> +
> + def check_traffic(self, mode):
> + """ normal traffic with all slaves are under active status.
> + verify the RX packets are all correct with stacked bonded device.
> + bonded device's statistics should be the sum of slaves statistics.
> + """
> + self.bond_inst.start_testpmd()
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.preset_stacked_bonded(slaveGrpOne, slaveGrpTwo, mode)
> + results = []
> + # check first bonded device
> + try:
> + self.logger.info('check first bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne:
> + self.active_slave_rx(slave, bond_port_1, mode)
> + except Exception as e:
> + results.append(e)
> + # check second bonded device
> + try:
> + self.logger.info('check second bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne:
> + self.active_slave_rx(slave, bond_port_2, mode)
> + except Exception as e:
> + results.append(e)
> +
> + # check top bonded device
> + try:
> + self.logger.info('check master bonded device')
> + # active slave traffic testing
> + for slave in slaveGrpOne + slaveGrpTwo:
> + self.active_slave_rx(slave, master_bond_port, mode)
> + except Exception as e:
> + results.append(e)
> +
> + self.bond_inst.close_testpmd()
> +
> + return results
> +
> + def backup_check_traffic(self):
> + mode = MODE_ACTIVE_BACKUP
> + msg = "begin checking bonding backup(stacked) mode transmission"
> + self.logger.info(msg)
> + results = self.check_traffic(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + raise VerifyFailure("backup(stacked) mode: rx failed")
> +
> + def backup_check_traffic_with_slave_down(self):
> + mode = MODE_ACTIVE_BACKUP
> + self.logger.info("begin checking bonding backup(stacked) "
> + "mode transmission with one slave down")
> + results = self.check_traffic_with_one_slave_down(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + msg = "backup(stacked) mode: rx with one slave down failed"
> + raise VerifyFailure(msg)
> +
> + def xor_check_rx(self):
> + mode = MODE_XOR_BALANCE
> + msg = "begin checking bonding xor(stacked) mode transmission"
> + self.logger.info(msg)
> + results = self.check_traffic(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + raise VerifyFailure("xor(stacked) mode: rx failed")
> +
> + def xor_check_stacked_rx_one_slave_down(self):
> + mode = MODE_XOR_BALANCE
> + self.logger.info("begin checking bonding xor(stacked) mode "
> + "transmission with one slave down")
> + results = self.check_traffic_with_one_slave_down(mode)
> + if results:
> + for item in results:
> + self.logger.error(item)
> + msg = "xor(stacked) mode: rx with one slave down failed"
> + raise VerifyFailure(msg)
> + #
> + # Test cases.
> + #
> + def set_up_all(self):
> + """
> + Run before each test suite
> + """
> + self.verify('bsdapp' not in self.target, "Bonding not support freebsd")
> + self.dut_ports = self.dut.get_ports()
> + num_ports = len(self.dut_ports)
> + self.verify(num_ports == 2 or num_ports == 4, "Insufficient ports")
> + # separate ports into two group as first level bond ports' slaves
> + sep_index = len(self.dut_ports)/2
> + self.slaveGrpOne = self.dut_ports[:sep_index]
> + self.slaveGrpTwo = self.dut_ports[sep_index:]
> + self.bond_slave = self.dut_ports[0]
> + # initialize bonding common methods name
> + self.total_pkt = 100
> + config = {
> + 'parent': self,
> + 'pkt_name': 'udp',
> + 'pkt_size': FRAME_SIZE_64,
> + 'src_mac': '52:00:00:00:00:03',
> + 'src_ip': '10.239.129.65',
> + 'src_port': 61,
> + 'dst_ip': '10.239.129.88',
> + 'dst_port': 53,}
> + self.bond_inst = bonding.PmdBonding(**config)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> +
> + def test_basic_behav(self):
> + '''
> + allow a bonded device to be added to another bonded device.
> + There's two limitations to create master bonding:
> +
> + - Total depth of nesting is limited to two levels,
> + - 802.3ad mode is not supported if one or more slaves is a
> + bond device
> +
> + note: There 802.3ad mode can not be supported on this bond device.
> +
> + This case is aimed at testing basic behavior of stacked bonded commands.
> +
> + '''
> + #------------------------------------------------
> + # check stacked bonded status, except mode 4 (802.3ad)
> + mode_list =[MODE_ROUND_ROBIN,
> + MODE_ACTIVE_BACKUP,
> + MODE_XOR_BALANCE,
> + MODE_BROADCAST,
> + MODE_TLB_BALANCE,
> + MODE_ALB_BALANCE]
> + slaveGrpOne = self.slaveGrpOne
> + slaveGrpTwo = self.slaveGrpTwo
> + check_result = []
> + for bond_mode in mode_list:
> + self.logger.info("begin mode <{0}> checking".format(bond_mode))
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + try:
> + self.logger.info("check bonding mode <{0}>".format(bond_mode))
> + # set up stacked bonded status
> + bond_port_1, bond_port_2, master_bond_port = \
> + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, bond_mode)
> + # check duplicate add slave
> + self.duplicate_add_stacked_bonded(bond_port_1, bond_port_2,
> + master_bond_port)
> + # check stacked limitation
> + self.set_third_stacked_bonded(master_bond_port, bond_mode)
> + # quit testpmd, it is not supported to reset testpmd
> + self.logger.info("mode <{0}> done !".format(bond_mode))
> + check_result.append([bond_mode, None])
> + except Exception as e:
> + check_result.append([bond_mode, e])
> + self.logger.error(e)
> + finally:
> + self.bond_inst.close_testpmd()
> + time.sleep(5)
> + #------------------------------------------------
> + # 802.3ad mode is not supported
> + # if one or more slaves is a bond device
> + # so it should raise a exception
> + msg = ''
> + try:
> + # boot up testpmd
> + self.bond_inst.start_testpmd()
> + # set up stacked bonded status
> + self.set_stacked_bonded(slaveGrpOne, slaveGrpTwo, MODE_LACP)
> + # quit testpmd, it is not supported to reset testpmd
> + msg = ("802.3ad mode hasn't been forbidden to "
> + "use stacked bonded setting")
> + check_result.append([MODE_LACP, msg])
> + except Exception as e:
> + check_result.append([MODE_LACP, None])
> + finally:
> + self.bond_inst.close_testpmd()
> +
> + exception_flag = False
> + for bond_mode, e in check_result:
> + msg = "mode <{0}>".format(bond_mode)
> + if e:
> + self.logger.info(msg)
> + self.logger.error(e)
> + exception_flag = True
> + else:
> + self.logger.info(msg + ' done !')
> + # if some checking item is failed, raise exception
> + if exception_flag:
> + raise VerifyFailure('some test items failed')
> + else:
> + self.logger.info('all test items have done !')
> +
> + def test_mode_backup_rx(self):
> + """
> + Verify receive packets correctly in the active-backup(stacked) mode.
> + """
> + self.backup_check_traffic()
> +
> + def test_mode_backup_one_slave_down(self):
> + """
> + Verify that receive packets correctly in the active-backup(stacked) mode
> + when bringing any one slave of the bonding device link down.
> + """
> + slave_down_port_limit = 4
> + if len(self.dut_ports) < slave_down_port_limit:
> + msg = ("ports less than {0}, "
> + "ignore stacked one slave down check").format(
> + slave_down_port_limit)
> + self.logger.warning(msg)
> + return
> + self.backup_check_traffic_with_slave_down()
> +
> + def test_mode_xor_rx(self):
> + """
> + Verify that receive packets correctly in the XOR(stacked) mode.
> + """
> + self.xor_check_rx()
> +
> + def test_mode_xor_rx_one_slave_down(self):
> + """
> + Verify that receive packets correctly in the XOR(stacked) mode when
> + bringing any one slave of the bonding device link down.
> + """
> + slave_down_port_limit = 4
> + if len(self.dut_ports) < slave_down_port_limit:
> + msg = ("ports less than {0}, "
> + "ignore stacked one slave down check").format(
> + slave_down_port_limit)
> + self.logger.warning(msg)
> + return
> + self.xor_check_stacked_rx_one_slave_down()
> \ No newline at end of file
> --
> 1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-02-28 11:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-28 6:01 [dts] [PATCH V2][pmd_stacked_bonded]: upload test plan and automation script yufengmx
2019-02-28 6:01 ` [dts] [PATCH V2]pmd_stacked_bonded: upload " yufengmx
2019-02-28 6:03 ` Mo, YufengX
2019-02-28 8:40 ` Chen, Zhaoyan
2019-02-28 11:02 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).