From: "Ma, LihongX" <lihongx.ma@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V2] tests: add testsuite pvp vhost user built in net driver
Date: Tue, 2 Jul 2019 07:23:28 +0000 [thread overview]
Message-ID: <BE1E572D0441E34284F1F8B7AC28F1970BADA132@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <E0CBA5A1980F1F408E1F28F9991B5B1D50EAE744@SHSMSX104.ccr.corp.intel.com>
Tested-by:lihong<lihongx.ma@intel.com>
-----Original Message-----
From: Wang, Yinan
Sent: Thursday, June 27, 2019 4:24 PM
To: Ma, LihongX <lihongx.ma@intel.com>; dts@dpdk.org
Subject: RE: [dts][PATCH V2] tests: add testsuite pvp vhost user built in net driver
Acked-by: Wang, Yinan <yinan.wang@intel.com>
> -----Original Message-----
> From: Ma, LihongX
> Sent: 2019年6月27日 7:36
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts][PATCH V2] tests: add testsuite pvp vhost user built in
> net driver
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> ...TestSuite_pvp_vhost_user_built_in_net_driver.py | 224
> +++++++++++++++++++++
> 1 file changed, 224 insertions(+)
> create mode 100644
> tests/TestSuite_pvp_vhost_user_built_in_net_driver.py
>
> diff --git a/tests/TestSuite_pvp_vhost_user_built_in_net_driver.py
> b/tests/TestSuite_pvp_vhost_user_built_in_net_driver.py
> new file mode 100644
> index 0000000..1f560ae
> --- /dev/null
> +++ b/tests/TestSuite_pvp_vhost_user_built_in_net_driver.py
> @@ -0,0 +1,224 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +"""
> +
> +import utils
> +import time
> +import re
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pktgen import PacketGeneratorHelper
> +
> +
> +class TestPVPVhostUserBuiltInNetDriver(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
> + self.core_config = "1S/4C/1T"
> + self.dut_ports = self.dut.get_ports()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores_num = len([n for n in self.dut.cores if int(n['socket']) ==
> + self.ports_socket])
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + self.verify(self.cores_num >= 4,
> + "There has not enought cores to test this suite %s" %
> + self.suite_name)
> +
> + self.core_list = self.dut.get_core_list(
> + self.core_config, socket=self.ports_socket)
> + self.core_list_virtio_user = self.core_list[0:2]
> + self.core_list_vhost_user = self.core_list[2:4]
> + self.core_mask_virtio_user =
> utils.create_mask(self.core_list_virtio_user)
> + self.core_mask_vhost_user =
> utils.create_mask(self.core_list_vhost_user)
> + self.mem_channels = self.dut.get_memory_channels()
> + self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip']
> + self.prepare_vhost_switch()
> +
> + self.logger.info("You can config packet_size in file %s.cfg,"
> + %
> self.suite_name + \
> + " in region 'suite' like packet_sizes=[64, 128, 256]")
> + if 'packet_sizes' in self.get_suite_cfg():
> + self.frame_sizes = self.get_suite_cfg()['packet_sizes']
> + # create an instance to set stream field setting
> + self.pktgen_helper = PacketGeneratorHelper()
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + self.dut.send_expect("rm -rf ./vhost-net*", "# ")
> + self.dut.send_expect("rm -rf ./vhost.out", "# ")
> + self.dut.send_expect("killall -s INT vhost", "# ")
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.vhost_switch = self.dut.new_session(suite="vhost-switch")
> + self.virtio_user = self.dut.new_session(suite="virtio-user")
> + # Prepare the result table
> + self.virtio_mac = "00:11:22:33:44:10"
> + self.vlan_id = 1000
> + self.table_header = ['Frame']
> + self.table_header.append("Mode")
> + self.table_header.append("Mpps")
> + self.table_header.append("Queue Num")
> + self.table_header.append("% linerate")
> + self.result_table_create(self.table_header)
> +
> + def prepare_vhost_switch(self):
> + cmd_info = self.dut.send_expect("grep 'define MAX_QUEUES' %s" %
> + "./examples/vhost/main.c", "# ")
> + out = re.search("#define MAX_QUEUES\s*(\d*)", cmd_info)
> + if out is not None:
> + self.default_queue = out.group(1)
> + else:
> + self.default_queue = 128
> + sed_cmd = "sed -i -e 's/#define MAX_QUEUES.*$/#define
> MAX_QUEUES %d/' " + \
> + "./examples/vhost/main.c"
> + if self.nic in ['niantic']:
> + max_queues = 128
> + else:
> + max_queues = 512
> + self.dut.send_expect(sed_cmd % max_queues, "#", 10)
> + out = self.dut.build_dpdk_apps('./examples/vhost')
> + self.verify('make: Leaving directory' in out, "Compilation failed")
> + self.verify("Error" not in out, "compilation l3fwd-power error")
> + self.verify("No such" not in out, "Compilation error")
> +
> + def send_and_verify(self):
> + """
> + Send packet with packet generator and verify
> + """
> + for frame_size in self.frame_sizes:
> + payload_size = frame_size - self.headers_size
> + tgen_input = []
> + rx_port = self.tester.get_local_port(self.dut_ports[0])
> + tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.tester.scapy_append(
> + 'wrpcap("vhost.pcap",
> [Ether(dst="%s")/Dot1Q(vlan=%s)/IP()/("X"*%d)])' %
> + (self.virtio_mac, self.vlan_id, payload_size))
> + tgen_input.append((tx_port, rx_port, "vhost.pcap"))
> +
> + self.tester.scapy_execute()
> + self.tester.pktgen.clear_streams()
> + streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100,
> + None, self.tester.pktgen)
> + _, pps =
> self.tester.pktgen.measure_throughput(stream_ids=streams)
> + Mpps = pps / 1000000.0
> + self.verify(Mpps > 0, "%s can not receive packets of
> + frame
> size %d" % (self.running_case, frame_size))
> + throughput = Mpps * 100 / \
> + float(self.wirespeed(self.nic, frame_size, 1))
> +
> + results_row = [frame_size]
> + results_row.append("builtin-net-driver")
> + results_row.append(Mpps)
> + results_row.append("1")
> + results_row.append(throughput)
> + self.result_table_add(results_row)
> +
> + def launch_vhost_switch(self):
> + """
> + start vhost-switch on vhost
> + """
> + self.dut.send_expect("rm -rf ./vhost.out", "#")
> + command_line_client =
> + "./examples/vhost/build/app/vhost-switch " +
> \
> + "-c %s -n %d --socket-mem 2048,2048 -- " + \
> + "-p 0x1 --mergeable 0 --vm2vm 1 " + \
> + "--builtin-net-driver
> --socket-file ./vhost-net" + \
> + "> ./vhost.out &"
> + command_line_client = command_line_client %
> (self.core_mask_vhost_user,
> + self.mem_channels)
> + self.vhost_switch.send_expect(command_line_client, "# ", 120)
> + time.sleep(15)
> + try:
> + self.logger.info("Launch vhost sample:")
> + self.dut.session.copy_file_from(self.dut.base_dir + "/vhost.out")
> + fp = open('./vhost.out', 'r')
> + out = fp.read()
> + fp.close()
> + if "Error" in out:
> + raise Exception("Launch vhost sample failed")
> + else:
> + self.logger.info("Launch vhost sample finished")
> + except Exception as e:
> + self.verify(0, "ERROR: Failed to launch vhost sample: %s" %
> + str(e))
> +
> + def start_virtio_testpmd(self):
> + """
> + start testpmd on virtio
> + """
> + command_line_user = "./%s/app/testpmd -n %d -c %s " + \
> + "--no-pci --socket-mem 2048,2048
> --file-prefix=virtio-user " + \
> +
> "--vdev=net_virtio_user0,mac=%s,path=./vhost-net,queues=1 " + \
> + "-- -i --rxq=1 --txq=1"
> + command_line_user = command_line_user % (self.target,
> + self.mem_channels, self.core_mask_virtio_user, self.virtio_mac)
> + self.virtio_user.send_expect(command_line_user, "testpmd> ", 120)
> + self.virtio_user.send_expect("set fwd mac", "testpmd> ", 120)
> + self.virtio_user.send_expect("start tx_first", "testpmd> ",
> + 120)
> +
> + def close_all_apps(self):
> + """
> + close testpmd and vhost-switch
> + """
> + self.virtio_user.send_expect("quit", "# ", 60)
> + self.vhost_switch.send_expect("killall -s INT vhost", "# ", 60)
> + self.dut.close_session(self.vhost_switch)
> + self.dut.close_session(self.virtio_user)
> +
> + def test_perf_pvp_with_built_in_net_driver(self):
> + """
> + PVP test with vhost built-in net driver
> + """
> + self.launch_vhost_switch()
> + self.start_virtio_testpmd()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.dut.send_expect("killall -s INT vhost", "# ")
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + sed_cmd = "sed -i -e 's/#define MAX_QUEUES.*$/#define
> MAX_QUEUES %d/' " + \
> + "./examples/vhost/main.c"
> + self.dut.send_expect(sed_cmd % int(self.default_queue), "#", 10)
> + self.dut.build_dpdk_apps('./examples/vhost')
> --
> 2.7.4
next prev parent reply other threads:[~2019-07-02 7:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 23:35 lihong
2019-06-27 8:24 ` Wang, Yinan
2019-07-02 7:23 ` Ma, LihongX [this message]
2019-07-10 6:31 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BE1E572D0441E34284F1F8B7AC28F1970BADA132@SHSMSX101.ccr.corp.intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).