From: "Lin, Xueqin" <xueqin.lin@intel.com>
To: "Sun, GuinanX" <guinanx.sun@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Sun, GuinanX" <guinanx.sun@intel.com>
Subject: Re: [dts] [PATCH v2 2/2] tests/TestSuite_cloud_filter_with_l4_port.py add test cases
Date: Tue, 18 Aug 2020 01:59:26 +0000 [thread overview]
Message-ID: <BL0PR11MB3364282D1C0992CB7E5F8D18945C0@BL0PR11MB3364.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20200817083411.71430-2-guinanx.sun@intel.com>
Some comment as below.
Best regards,
Xueqin
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Guinan Sun
> Sent: Monday, August 17, 2020 4:34 PM
> To: dts@dpdk.org
> Cc: Sun, GuinanX <guinanx.sun@intel.com>
> Subject: [dts] [PATCH v2 2/2] tests/TestSuite_cloud_filter_with_l4_port.py
> add test cases
>
> add test cases for the new cloud filter.
>
> Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
> ---
> tests/TestSuite_cloud_filter_with_l4_port.py | 400 +++++++++++++++++++
> 1 file changed, 400 insertions(+)
> create mode 100644 tests/TestSuite_cloud_filter_with_l4_port.py
>
> diff --git a/tests/TestSuite_cloud_filter_with_l4_port.py
> b/tests/TestSuite_cloud_filter_with_l4_port.py
> new file mode 100644
> index 0000000..37b646e
> --- /dev/null
> +++ b/tests/TestSuite_cloud_filter_with_l4_port.py
> @@ -0,0 +1,400 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2020 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Test the support of generic flow API by Poll Mode Drivers.
> +
> +"""
> +
> +import utils
> +import time
> +import re
> +
> +from test_case import TestCase
> +from pmd_output import PmdOutput
> +from settings import DRIVERS
> +from crb import Crb
> +from dut import Dut
> +import packet
> +from exception import VerifyFailure
> +import scapy.layers.inet
> +from scapy.utils import rdpcap
> +
> +MAX_QUEUE = 16
> +
> +class TestCloudFilterWithL4Port(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + Generic filter Prerequistites
> + """
> + # Based on h/w type, choose how many ports to use
> + self.dut_ports = self.dut.get_ports(self.nic)
> + # Verify that enough ports are available
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
> + self.cores = "1S/8C/1T"
> + self.pf_cores = "1S/8C/1T"
> + self.pmdout = PmdOutput(self.dut)
> +
> + localPort = self.tester.get_local_port(self.dut_ports[0])
> + self.tester_itf = self.tester.get_interface(localPort)
> + self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
> + self.pf_mac = self.dut.get_mac_address(0)
> + self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
> + self.pkt_obj = packet.Packet()
> +
> + self.verify(self.nic in ["fortville_eagle", "fortville_spirit", "carlsville",
> + "fortville_spirit_single", "fortpark_TLV",
> + "fortpark_BASE-T","fortville_25g"], "%s nic not
> + support fdir vlan filter" % self.nic)
Wrong for "not support fdir vlan filter"
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + self.dut.kill_all()
> +
> + self.pmdout.start_testpmd("%s" % self.cores, "--rxq=%d --txq=%d --
> disable-rss" % (MAX_QUEUE, MAX_QUEUE), "-w %s --file-prefix=test1" %
> self.pf_pci)
> + self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
> + self.dut.send_expect("set promisc all off", "testpmd> ", 120)
> + self.dut.send_expect("set verbose 1", "testpmd> ", 120)
> + self.dut.send_expect("start", "testpmd> ", 120)
> + time.sleep(2)
> +
> + def destroy_env(self):
> + """
> + This is to stop testpmd.
> + """
> + self.dut.send_expect("quit", "# ")
> + time.sleep(2)
> +
> + def compare_memory_rules(self, expectedRules):
> + """
> + dump all flow rules that have been created in memory and compare
> that total rules number with the given expected number
> + to see if they are equal, as to get your conclusion after you have
> deleted any flow rule entry.
> + """
> + outstring = self.dut.send_expect("flow list 0", "testpmd> ", 20)
> + result_scanner = r'\d*.*?\d*.*?\d*.*?=>*'
> + scanner = re.compile(result_scanner, re.DOTALL)
> + m = scanner.findall(outstring)
> + print("All flow entries are: ")
> + for i in range(len(m)):
> + print(m[i])
> + print('Expected rules are: %d - actual are: %d' % (expectedRules, len(m)))
> + self.verify(expectedRules == len(m), 'Total rules number
> + mismatched')
> +
> + def verify_rulenum(self, rule_num):
> + """
> + Verify all the rules created.
> + """
> + # check if there are expected flow rules have been created
> + self.compare_memory_rules(rule_num)
> + # check if one rule destroied with success
destroyed
> + self.dut.send_expect("flow destroy 0 rule 0", "testpmd> ")
> + self.compare_memory_rules(rule_num - 1)
> + # check if all flow rules have been removed with success
> + self.dut.send_expect("flow flush 0", "testpmd> ")
> + self.compare_memory_rules(0)
> +
> + def sendpkt(self, pktstr, count=1):
> + import sys
> + py_version = sys.version
> + if py_version.startswith('3.'):
> + self.pkt_obj.pktgen.pkts.clear()
> + else:
> + del self.pkt_obj.pktgen.pkts[:]
> + self.pkt_obj.append_pkt(pktstr)
> + self.pkt_obj.send_pkt(self.tester, tx_port=self.tester_itf,
> + count=count)
> +
> + def sendpkt_check_result(self, src_port, dst_port, queue, match,
> pctype=""):
> + match_info = "/queue %d: " % queue
> + # source port
> + if src_port != "" and dst_port == "":
> + if pctype == "ipv4-udp":
> + self.sendpkt(pktstr='Ether()/IP()/UDP(sport=%s)' % src_port)
> + elif pctype == "ipv4-tcp":
> + self.sendpkt(pktstr='Ether()/IP()/TCP(sport=%s)' % src_port)
> + elif pctype == "ipv4-sctp":
> + self.sendpkt(pktstr='Ether()/IP()/SCTP(sport=%s)' % src_port)
> + elif pctype == "ipv6-udp":
> + self.sendpkt(pktstr='Ether()/IPv6()/UDP(sport=%s)' % src_port)
> + elif pctype == "ipv6-tcp":
> + self.sendpkt(pktstr='Ether()/IPv6()/TCP(sport=%s)' % src_port)
> + elif pctype == "ipv6-sctp":
> + self.sendpkt(pktstr='Ether()/IPv6()/SCTP(sport=%s)' % src_port)
> + elif src_port == "" and dst_port != "":
> + if pctype == "ipv4-udp":
> + self.sendpkt(pktstr='Ether()/IP()/UDP(dport=%s)' % dst_port)
> + elif pctype == "ipv4-tcp":
> + self.sendpkt(pktstr='Ether()/IP()/TCP(dport=%s)' % dst_port)
> + elif pctype == "ipv4-sctp":
> + self.sendpkt(pktstr='Ether()/IP()/SCTP(dport=%s)' % dst_port)
> + elif pctype == "ipv6-udp":
> + self.sendpkt(pktstr='Ether()/IPv6()/UDP(dport=%s)' % dst_port)
> + elif pctype == "ipv6-tcp":
> + self.sendpkt(pktstr='Ether()/IPv6()/TCP(dport=%s)' % dst_port)
> + elif pctype == "ipv6-sctp":
> + self.sendpkt(pktstr='Ether()/IPv6()/SCTP(dport=%s)' % dst_port)
> + elif src_port != "" and dst_port != "":
> + if pctype == "ipv4-udp":
> + self.sendpkt(pktstr='Ether()/IP()/UDP(sport=%s,
> + dport=%s)' % (src_port, dst_port))
> +
> + out_pf = self.dut.get_session_output(timeout=2)
> + print("out_pf is %s" % out_pf)
> +
> + if match == 1:
> + self.verify(match_info in out_pf, "the packet not match the expect
> queue %d." % queue)
> + else:
> + if match_info in out_pf:
> + raise Exception("the packet should not match the queue
> + %d." % queue)
> +
> + def cloudfilter_test(
> + self, ip_type='ipv4', l4_port_type='udp', src_dst='src', port_value=156,
> queue_id=0):
> +
> + # validate
> + self.dut.send_expect(
> + "flow validate 0 ingress pattern eth / %s / %s %s is %d / end actions
> pf / queue index %d / end"
> + % (ip_type, l4_port_type, src_dst, port_value, queue_id),
> + "validated")
> +
> + # create
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / %s / %s %s is %d / end actions
> pf / queue index %d / end"
> + % (ip_type, l4_port_type, src_dst, port_value, queue_id),
> + "created")
> +
> + # list
> + self.compare_memory_rules(1)
> +
> + if src_dst is 'src':
> + self.sendpkt_check_result("%d"%port_value, "", queue_id, 1, "%s-
> %s"%(ip_type,l4_port_type))
> + self.sendpkt_check_result("%d"%(port_value-1), "", queue_id, 0,
> "%s-%s"%(ip_type,l4_port_type))
> + else:
> + self.sendpkt_check_result("", "%d"%port_value, queue_id, 1, "%s-
> %s"%(ip_type,l4_port_type))
> + self.sendpkt_check_result("", "%d"%(port_value-1),
> + queue_id, 0, "%s-%s"%(ip_type,l4_port_type))
> +
> + # flush
> + self.dut.send_expect("flow flush 0", "testpmd> ")
> +
> + if src_dst is 'src':
> + self.sendpkt_check_result("%d"%(port_value-1), "", queue_id, 0,
> "%s-%s"%(ip_type,l4_port_type))
> + else:
> + self.sendpkt_check_result("", "%d"%(port_value-1),
> + queue_id, 0, "%s-%s"%(ip_type,l4_port_type))
> +
> + self.compare_memory_rules(0)
> +
> + def test_ipv4_udp_sport_only(self):
> + """
> + only supported by i40e
> + """
Should not have the sentence, above have check the NIC type, same as below.
> + # ipv4-udp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='udp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv4_udp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv4-udp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='udp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_ipv4_tcp_sport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv4-tcp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='tcp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv4_tcp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + #ipv4-tcp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='tcp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_ipv4_sctp_sport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv4-sctp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='sctp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv4_sctp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + #ipv4-sctp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv4', l4_port_type='sctp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_udp_sport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv6-udp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='udp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_udp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv6-udp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='udp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_tcp_sport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv6-tcp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='tcp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_tcp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + #ipv6-tcp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='tcp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_sctp_sport_only(self):
> + """
> + only supported by i40e
> + """
> + # ipv6-sctp
> + # only src port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='sctp', src_dst='src',
> + port_value=156, queue_id=1)
> +
> + def test_ipv6_sctp_dport_only(self):
> + """
> + only supported by i40e
> + """
> + #ipv6-sctp
> + # only dst port
> + self.cloudfilter_test(
> + ip_type='ipv6', l4_port_type='sctp', src_dst='dst',
> + port_value=156, queue_id=1)
> +
> + def test_multi_rule(self):
> + """
> + only supported by i40e
> + """
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / udp src is 11 / end actions
> pf / queue index 1 / end",
> + "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / tcp src is 22 / end actions
> pf / queue index 2 / end",
> + "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / sctp src is 33 / end actions
> pf / queue index 3 / end",
> + "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / udp dst is 44 / end actions
> pf / queue index 4 / end",
> + "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / tcp dst is 55 / end actions
> pf / queue index 5 / end",
> + "created")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / sctp dst is 66 / end actions
> pf / queue index 6 / end",
> + "created")
> +
> + self.sendpkt_check_result("11", "", 1, 1, "ipv4-udp")
> + self.sendpkt_check_result("22", "", 2, 1, "ipv4-tcp")
> + self.sendpkt_check_result("33", "", 3, 1, "ipv4-sctp")
> + self.sendpkt_check_result("", "44", 4, 1, "ipv4-udp")
> + self.sendpkt_check_result("", "55", 5, 1, "ipv4-tcp")
> + self.sendpkt_check_result("", "66", 6, 1, "ipv4-sctp")
> +
> + # destroy
> + self.dut.send_expect("flow destroy 0 rule 0", "testpmd> ")
> +
> + self.sendpkt_check_result("11", "", 1, 0, "ipv4-udp")
> +
> + self.compare_memory_rules(5)
> +
> + # flush
> + self.dut.send_expect("flow flush 0", "testpmd> ")
> +
> + self.sendpkt_check_result("22", "", 2, 0, "ipv4-tcp")
> +
> + self.compare_memory_rules(0)
> +
> + def test_negative(self):
> + """
> + only supported by i40e
> + """
> + # unsupported rules
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / udp src is 156 dst is 156 /
> end actions pf / queue index 1 / end",
> + "error")
> +
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / udp src is 156 / end actions
> pf / queue index 1 / end",
> + "create")
> +
> + # conflicted rules
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv4 / udp src is 156 / end actions
> pf / queue index 2 / end",
> + "error")
> + self.dut.send_expect(
> + "flow create 0 ingress pattern eth / ipv6 / udp src is 156 / end actions
> pf / queue index 2 / end",
> + "error")
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.destroy_env()
> + self.dut.kill_all()
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.dut.kill_all()
> --
> 2.17.1
next prev parent reply other threads:[~2020-08-18 1:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-17 5:54 [dts] [PATCH v1 1/2] test_plans: add cloud_filter_with_l4_port_test_plan.rst Guinan Sun
2020-08-17 5:54 ` [dts] [PATCH v1 2/2] tests/TestSuite_cloud_filter_with_l4_port.py add test cases Guinan Sun
2020-08-17 6:11 ` [dts] [PATCH v1 1/2] test_plans: add cloud_filter_with_l4_port_test_plan.rst Lin, Xueqin
2020-08-17 8:34 ` [dts] [PATCH v2 " Guinan Sun
2020-08-17 8:34 ` [dts] [PATCH v2 2/2] tests/TestSuite_cloud_filter_with_l4_port.py add test cases Guinan Sun
2020-08-18 1:59 ` Lin, Xueqin [this message]
2020-08-18 2:08 ` [dts] [PATCH v2 1/2] test_plans: add cloud_filter_with_l4_port_test_plan.rst Lin, Xueqin
2020-08-18 3:07 ` [dts] [PATCH v3 " Guinan Sun
2020-08-18 3:07 ` [dts] [PATCH v3 2/2] tests/TestSuite_cloud_filter_with_l4_port.py add test cases Guinan Sun
2020-08-18 5:11 ` Lin, Xueqin
2020-08-18 8:38 ` Chen, LingliX
2020-08-21 3:31 ` Tu, Lijuan
2020-08-18 5:07 ` [dts] [PATCH v3 1/2] test_plans: add cloud_filter_with_l4_port_test_plan.rst Lin, Xueqin
2020-08-21 3:28 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BL0PR11MB3364282D1C0992CB7E5F8D18945C0@BL0PR11MB3364.namprd11.prod.outlook.com \
--to=xueqin.lin@intel.com \
--cc=dts@dpdk.org \
--cc=guinanx.sun@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).