From: "Lin, Xueqin" <xueqin.lin@intel.com>
To: "Chen, BoX C" <box.c.chen@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Chen, BoX C" <box.c.chen@intel.com>
Subject: Re: [dts] [PATCH V2] test_plans/cvl_dcf_switch_filter: add drop action test
Date: Mon, 14 Dec 2020 05:28:41 +0000 [thread overview]
Message-ID: <BL0PR11MB3364BAA3EAC015FA087AC6D994C70@BL0PR11MB3364.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20201211022813.13570-1-box.c.chen@intel.com>
Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of ChenBo
> Sent: Friday, December 11, 2020 10:28 AM
> To: dts@dpdk.org
> Cc: Chen, BoX C <box.c.chen@intel.com>
> Subject: [dts] [PATCH V2] test_plans/cvl_dcf_switch_filter: add drop action
> test
>
> Add drop action test according to customer requirements.
>
> Signed-off-by: ChenBo <box.c.chen@intel.com>
> ---
> .../cvl_dcf_switch_filter_test_plan.rst | 436 +++++++++++++++++-
> 1 file changed, 431 insertions(+), 5 deletions(-)
>
> diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst
> b/test_plans/cvl_dcf_switch_filter_test_plan.rst
> index 55ea726..c90f439 100644
> --- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
> +++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
> @@ -3965,12 +3965,12 @@ received and forwarded when there is one vf
> for forwarding, and no packets are d
> ---------------------- Forward statistics for port 1 ----------------------
> RX-packets: 1 RX-dropped: 0 RX-total: 1
> TX-packets: 1 TX-dropped: 0 TX-total: 1
> - ----------------------------------------------------------------------------
> + ----------------------------------------------------------------------------
>
> - +++++++++++++++ Accumulated forward statistics for all
> ports+++++++++++++++
> - RX-packets: 1 RX-dropped: 0 RX-total: 1
> - TX-packets: 1 TX-dropped: 0 TX-total: 1
> -
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++
> + +++++++++++++++ Accumulated forward statistics for all
> ports+++++++++++++++
> + RX-packets: 1 RX-dropped: 0 RX-total: 1
> + TX-packets: 1 TX-dropped: 0 TX-total: 1
> +
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++
>
> check the RX-packets and TX-packets of port 1 are both 1, and the TX-
> dropped in
> "Accumulated forward statistics for all ports" is 0.
> @@ -4556,3 +4556,429 @@ Subcase 1: DCF stop/DCF start
> check the rule is still there.
>
> 5. send matched packets, port 1 can still receive the packets.
> +
> +Test case: Drop action test
> +======================
> +
> +Subcase 1: DCF DROP IPV4 SRC PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.1 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_SRC_ADDR rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.1 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> + sendp([Ether()/IP(src="192.168.0.1")/Raw("x"*80)],iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> + sendp([Ether()/IP(src="192.168.0.2")/Raw("x"*80)],iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 2: DCF DROP IPV4 SRC SPEC MASK PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst
> mask 240.0.0.0 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_SRC_SPEC_PAY rule::
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst
> mask 240.0.0.0 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="239.0.0.0")/TCP()/Raw("x"*8
> 0)],iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="128.0.0.0")/TCP()/Raw("x"*8
> 0)],iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 3: DCF DROP NVGRE PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 192.168.0.1 /
> nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions
> drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_NVGRE_PAY rule::
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.1 /
> nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions
> drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> +
> sendp([Ether()/IP(dst="192.168.0.1")/NVGRE(TNI=2)/Ether()/IP(src="192.168.
> 1.2", dst="192.168.1.3")/Raw("x"*80)],iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> +
> sendp([Ether()/IP(dst="192.168.0.1")/NVGRE(TNI=1)/Ether()/IP(src="192.168.
> 1.2", dst="192.168.1.3")/Raw("x"*80)],iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 4: DCF DROP PPOES PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 /
> vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop /
> end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_PPOES_PAY rule::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8
> 864)/PPPoE(sessionid=3)/PPP(b'\\x00\\x21')/IP()/Raw("x" *
> 80)],iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8
> 864)/PPPoE(sessionid=2)/PPP(b'\\x00\\x21')/IP()/Raw("x" *
> 80)],iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 5: DCF DROP PFCP PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / pfcp s_field is
> 0 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_PFCP rule::
> +
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0
> / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> +
> sendp(Ether(dst="00:11:22:33:44:11")/IP()/UDP(dport=8805)/PFCP(S=0),iface
> ="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> +
> sendp(Ether(dst="00:11:22:33:44:11")/IP()/UDP(dport=8805)/PFCP(S=1),iface
> ="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 6: DCF DROP VLAN PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 /
> vlan tci is 1 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_VLAN rule::
> +
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 1 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1)/IP(src="
> 192.168.0.1",dst="192.168.0.2",tos=4,ttl=2)/TCP()/Raw("X"*80)],iface="enp
> 27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2)/IP(src="
> 192.168.0.1",dst="192.168.0.2",tos=4,ttl=2)/TCP()/Raw("X"*80)],iface="enp
> 27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 7: DCF DROP L2TP PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / l2tpv3oip session_id is 1 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_L2TP_PAY rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / l2tpv3oip session_id is 1 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2',
> proto=115)/L2TP(b'\\x00\\x00\\x00\\x01')/('X'*480)], iface="enp27s0f0",
> count=1)
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.2',
> proto=115)/L2TP(b'\\x00\\x00\\x00\\x02')/('X'*480)], iface="enp27s0f0",
> count=1)
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 8: DCF DROP ESP PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / esp spi is 1 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create MAC_IPV4_ESP_PAY rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 / esp spi is 1 / end actions drop / end
> + testpmd> flow list 0
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=50)/ESP(spi=1)/("X"*80)], iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.2",
> proto=50)/ESP(spi=2)/("X"*80)], iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> +
> +Subcase 8: DCF DROP blend PACKAGES
> +-----------------------------
> +
> +1. validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.1 / end actions drop / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst
> mask 240.0.0.0 / end actions drop / end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 192.168.0.1 /
> nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions
> drop / end
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 /
> vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop /
> end
> + testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / pfcp s_field is
> 0 / end actions drop / end
> + testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 /
> vlan tci is 1 / end actions drop / end
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.4 / l2tpv3oip session_id is 1 / end actions drop / end
> + testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.5 / esp spi is 1 / end actions drop / end
> +
> + get the message::
> +
> + Flow rule validated
> +
> + check the flow list::
> +
> + testpmd> flow list 0
> +
> + check the rule not exists in the list.
> +
> +2. create rule::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.1 / end actions drop / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst
> mask 240.0.0.0 / end actions drop / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.1 /
> nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions
> drop / end
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
> + testpmd> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0
> / end actions drop / end
> + testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan
> tci is 1 / end actions drop / end
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.4 / l2tpv3oip session_id is 1 / end actions drop / end
> + testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is
> 192.168.0.5 / esp spi is 1 / end actions drop / end
> +
> + check the rule exists in the list.
> +
> +3. send matched packets::
> +
> + sendp([Ether()/IP(src="192.168.0.1")/Raw("x"*80)],iface="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="239.0.0.0")/TCP()/Raw("x"*8
> 0)],iface="enp27s0f0")
> +
> sendp([Ether()/IP(dst="192.168.0.3")/NVGRE(TNI=2)/Ether()/IP(src="192.168.
> 1.2", dst="192.168.1.3")/Raw("x"*80)],iface="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8
> 864)/PPPoE(sessionid=3)/PPP(b'\\x00\\x21')/IP()/Raw("x" *
> 80)],iface="enp27s0f0")
> +
> sendp(Ether(dst="00:11:22:33:44:11")/IP()/UDP(dport=8805)/PFCP(S=0),iface
> ="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1)/IP(src="
> 192.168.0.1",dst="192.168.0.2",tos=4,ttl=2)/TCP()/Raw("X"*80)],iface="enp
> 27s0f0")
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.4',
> proto=115)/L2TP(b'\\x00\\x00\\x00\\x01')/('X'*480)], iface="enp27s0f0",
> count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.5",
> proto=50)/ESP(spi=1)/("X"*80)], iface="enp27s0f0")
> +
> + check port can't receive the packet.
> +
> +4. send mismatched packets::
> +
> + sendp([Ether()/IP(src="192.168.0.6")/Raw("x"*80)],iface="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="128.0.0.0")/TCP()/Raw("x"*8
> 0)],iface="enp27s0f0")
> +
> sendp([Ether()/IP(dst="192.168.0.8")/NVGRE(TNI=1)/Ether()/IP(src="192.168.
> 1.2", dst="192.168.1.3")/Raw("x"*80)],iface="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8
> 864)/PPPoE(sessionid=2)/PPP(b'\\x00\\x21')/IP()/Raw("x" *
> 80)],iface="enp27s0f0")
> +
> sendp(Ether(dst="00:11:22:33:44:11")/IP()/UDP(dport=8805)/PFCP(S=1),iface
> ="enp27s0f0")
> +
> sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2)/IP(src="
> 192.168.0.9",dst="192.168.0.2",tos=4,ttl=2)/TCP()/Raw("X"*80)],iface="enp
> 27s0f0")
> + sendp([Ether(dst='00:11:22:33:44:12')/IP(src='192.168.0.10',
> proto=115)/L2TP(b'\\x00\\x00\\x00\\x02')/('X'*480)], iface="enp27s0f0",
> count=1)
> + sendp([Ether(dst="00:11:22:33:44:13")/IP(src="192.168.0.11",
> proto=50)/ESP(spi=2)/("X"*80)], iface="enp27s0f0")
> +
> + check port can receive the packet.
> +
> +5. verify rules can be destroyed::
> +
> + testpmd> flow flush 0
> + testpmd> flow list 0
> +
> + check the rules not exist in the list.
> + send matched packets, check port can receive the packet.
> --
> 2.17.1
next prev parent reply other threads:[~2020-12-14 5:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 2:28 ChenBo
2020-12-14 5:28 ` Lin, Xueqin [this message]
2020-12-15 7:10 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BL0PR11MB3364BAA3EAC015FA087AC6D994C70@BL0PR11MB3364.namprd11.prod.outlook.com \
--to=xueqin.lin@intel.com \
--cc=box.c.chen@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).