test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans/flexible_rxd:add MPLS test cases
@ 2021-02-24  7:20 Hailin Xu
  2021-02-25  9:01 ` Lin, Xueqin
  0 siblings, 1 reply; 2+ messages in thread
From: Hailin Xu @ 2021-02-24  7:20 UTC (permalink / raw)
  To: dts; +Cc: xueqin.lin, Hailin Xu

add MPLS test cases.

Signed-off-by: Hailin Xu <hailinx.xu@intel.com>
---
 test_plans/flexible_rxd_test_plan.rst | 363 +++++++++++++++++++++++++-
 1 file changed, 360 insertions(+), 3 deletions(-)

diff --git a/test_plans/flexible_rxd_test_plan.rst b/test_plans/flexible_rxd_test_plan.rst
index 1520d5f6..47b8fbff 100644
--- a/test_plans/flexible_rxd_test_plan.rst
+++ b/test_plans/flexible_rxd_test_plan.rst
@@ -46,9 +46,9 @@ Prerequisites
 =============
 
 Copy correct ``ice.pkg`` into ``/usr/lib/firmware/intel/ice/ddp/``, \
-For the test cases, comms package is expected.
+For the test cases, os/comms/wireless package is expected, except that "test case 12" only support os package.
 
-Prepare test toplogoy, in the test case, it requires
+Prepare test toplogy, in the test case, it requires
 
 - 1 Intel E810 interface
 - 1 network interface for sending test packet,
@@ -57,6 +57,22 @@ Prepare test toplogoy, in the test case, it requires
 
 Patch testpmd for dumping flexible fields from RXD::
 
+  diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
+  index 7e9c7bdd6..b75b90a9c 100644
+  --- a/app/test-pmd/meson.build
+  +++ b/app/test-pmd/meson.build
+  @@ -49,6 +49,9 @@ endif
+  if dpdk_conf.has('RTE_NET_I40E')
+        deps += 'net_i40e'
+   endif
+  +if dpdk_conf.has('RTE_NET_ICE')
+  +       deps += ['net_ice', 'net_iavf']
+  +endif
+   if dpdk_conf.has('RTE_NET_IXGBE')
+          deps += 'net_ixgbe'
+   endif
+
+
   diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
   index a1164b7..b90344d 100644
   --- a/app/test-pmd/util.c
@@ -116,7 +132,7 @@ Send a packet with VLAN tag from test network interface::
 Please notice
 
 - Change ethernet source address with your test network interface's address
-- Make sure the ethernet destination addres is NOT your real E810 interface's address
+- Make sure the ethernet destination address is NOT your real E810 interface's address
 
 Check the output in testpmd, **ctag=1:0:23** is expected, which is consistent with VLAN tag set in test packet::
 
@@ -345,6 +361,7 @@ Expected output in testpmd::
 
 Test Case 12: Check effect of replacing pkg from RXID #22 to RXID #16
 =====================================================================
+the case only support os pkg
 
 Put the ice.pkg with RXID #16(ice-1.3.7.0.pkg and more) to /lib/firmware/updates/intel/ice/ddp/ice.pkg, then reload ice driver::
 
@@ -372,3 +389,343 @@ Replace correct ice.pkg to /lib/firmware/updates/intel/ice/ddp/ice.pkg,then relo
 
   rmmod ice
   modprobe ice.ko
+
+Test Case 13: Check testpmd use different parameters start
+==========================================================
+Test steps are same to ``Test Case 01``, use different "proto_xtr" parameters the launch command of testpmd, check RXDID value.
+
+use error parameter Launch testpmd::
+
+  ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=vxlan -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+
+testpmd can't started, check "iavf_lookup_flex_desc_type(): wrong flex_desc type, it should be: vlan|ipv4|ipv6|ipv6_flow|tcp|ovs|ip_offset" in testpmd output.
+
+don't use parameter launch testpmd::
+
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+
+testpmd started, check "iavf_configure_queues(): request RXDID[16] in Queue[0]" in testpmd output
+
+MPLS TEST
+===================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+all MPLS cases use same parameter Launch testpmd::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ip_offset -- -i  --portmask=0x1 --nb-cores=2
+
+check RXDID value correct::
+
+    expected: RXDID[25]
+
+scapy prepare:
+===================
+about scapy:
+from scapy.contrib.mpls import MPLS
+
+Test Case 14: Check ip offset of ip
+===================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=18
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=18
+
+Test Case 15: check ip offset with vlan
+=======================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test Case 16: check offset with 2 vlan tag
+==========================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test Case 17: check ip offset with multi MPLS
+=============================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=18
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=18
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test Case 18: check ip offset with multi MPLS with vlan tag
+===========================================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=38
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=22
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=38
+
+Test Case 19: check ip offset with multi MPLS with 2 vlan tag
+=============================================================
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=38
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IP()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=42
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=26
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=30
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=34
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=38
+
+Test packet::
+
+    p = Ether(dst="00:11:22:33:44:55",type=0x88A8)/Dot1Q(type=0x8100)/Dot1Q(type=0x8847)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=0)/MPLS(s=1)/IPv6()
+
+Expected output in testpmd::
+
+    Protocol Offset:ip_offset=42
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-25  9:02 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-24  7:20 [dts] [PATCH v1] test_plans/flexible_rxd:add MPLS test cases Hailin Xu
2021-02-25  9:01 ` Lin, Xueqin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).