* [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
@ 2021-07-30 13:51 Lingli Chen
2021-08-02 9:52 ` Lin, Xueqin
0 siblings, 1 reply; 4+ messages in thread
From: Lingli Chen @ 2021-07-30 13:51 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
add new Test case: i40e create same rule after destroy/ i40e create
diffrent rule after destroy.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/generic_flow_api_test_plan.rst | 48 +++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index 71f16187..6e477f43 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -1996,3 +1996,51 @@ Test case: Dual vlan(QinQ)
3). send packet as step 2 with changed ivlan id, got hash value and queue value that output from the testpmd on DUT, the value should be
different with the values in step 2 & step 1) & step 2).
+
+Test case: Fortville create same rule after destroy
+===================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. verify rules can be create after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+
+3. send packets match rule::
+
+ pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
+
+4. send packets not match rule::
+
+ pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+Test case: Fortville create diffrent rule after destroy
+=======================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. verify rules can be create after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp dst is 32 / end actions queue index 2 / end
+
+3. send packets match rule::
+
+ pkt1 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+4. send packets not match rule::
+
+ pkt2 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
--
2.32.0
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
2021-07-30 13:51 [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases Lingli Chen
@ 2021-08-02 9:52 ` Lin, Xueqin
0 siblings, 0 replies; 4+ messages in thread
From: Lin, Xueqin @ 2021-08-02 9:52 UTC (permalink / raw)
To: Chen, LingliX, dts; +Cc: Chen, LingliX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Lingli Chen
> Sent: Friday, July 30, 2021 9:52 PM
> To: dts@dpdk.org
> Cc: Chen, LingliX <linglix.chen@intel.com>
> Subject: [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
>
> add new Test case: i40e create same rule after destroy/ i40e create diffrent
> rule after destroy.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> ---
> test_plans/generic_flow_api_test_plan.rst | 48 +++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/test_plans/generic_flow_api_test_plan.rst
> b/test_plans/generic_flow_api_test_plan.rst
> index 71f16187..6e477f43 100644
> --- a/test_plans/generic_flow_api_test_plan.rst
> +++ b/test_plans/generic_flow_api_test_plan.rst
> @@ -1996,3 +1996,51 @@ Test case: Dual vlan(QinQ)
>
> 3). send packet as step 2 with changed ivlan id, got hash value and queue
> value that output from the testpmd on DUT, the value should be
> different with the values in step 2 & step 1) & step 2).
> +
> +Test case: Fortville create same rule after destroy
> +===================================================
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -
> i --disable-rss --rxq=16 --txq=16
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. verify rules can be create after destroy::
> +
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end
> actions queue index 2 / end
> + testpmd>flow destroy 0 rule 0
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is
> + 32 / end actions queue index 2 / end
> +
> +3. send packets match rule::
> +
> + pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
> +
> +4. send packets not match rule::
> +
> + pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
> +
> +Test case: Fortville create diffrent rule after destroy
> +=======================================================
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -
> i --disable-rss --rxq=16 --txq=16
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. verify rules can be create after destroy::
> +
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end
> actions queue index 2 / end
> + testpmd>flow destroy 0 rule 0
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp dst is
> + 32 / end actions queue index 2 / end
> +
> +3. send packets match rule::
> +
> + pkt1 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
> +
> +4. send packets not match rule::
> +
> + pkt2 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
> --
> 2.32.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
@ 2021-07-30 14:10 Lingli Chen
2021-08-10 6:23 ` Tu, Lijuan
0 siblings, 1 reply; 4+ messages in thread
From: Lingli Chen @ 2021-07-30 14:10 UTC (permalink / raw)
To: dts; +Cc: Lingli Chen
add new Test case: i40e create same rule after destroy/ i40e create different rule after destroy.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/generic_flow_api_test_plan.rst | 48 +++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index 71f16187..2c87da44 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -1996,3 +1996,51 @@ Test case: Dual vlan(QinQ)
3). send packet as step 2 with changed ivlan id, got hash value and queue value that output from the testpmd on DUT, the value should be
different with the values in step 2 & step 1) & step 2).
+
+Test case: Fortville create same rule after destroy
+===================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. verify rules can be create after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+
+3. send packets match rule::
+
+ pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
+
+4. send packets not match rule::
+
+ pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+Test case: Fortville create different rule after destroy
+=======================================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. verify rules can be create after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp dst is 32 / end actions queue index 2 / end
+
+3. send packets match rule::
+
+ pkt1 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+4. send packets not match rule::
+
+ pkt2 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
--
2.32.0
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
2021-07-30 14:10 Lingli Chen
@ 2021-08-10 6:23 ` Tu, Lijuan
0 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2021-08-10 6:23 UTC (permalink / raw)
To: Chen, LingliX, dts; +Cc: Chen, LingliX
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Lingli Chen
> Sent: 2021年7月30日 22:10
> To: dts@dpdk.org
> Cc: Chen, LingliX <linglix.chen@intel.com>
> Subject: [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases
>
> add new Test case: i40e create same rule after destroy/ i40e create different
> rule after destroy.
>
> Signed-off-by: Lingli Chen <linglix.chen@intel.com>
> ---
> test_plans/generic_flow_api_test_plan.rst | 48 +++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/test_plans/generic_flow_api_test_plan.rst
> b/test_plans/generic_flow_api_test_plan.rst
> index 71f16187..2c87da44 100644
> --- a/test_plans/generic_flow_api_test_plan.rst
> +++ b/test_plans/generic_flow_api_test_plan.rst
> @@ -1996,3 +1996,51 @@ Test case: Dual vlan(QinQ)
>
> 3). send packet as step 2 with changed ivlan id, got hash value and queue
> value that output from the testpmd on DUT, the value should be
> different with the values in step 2 & step 1) & step 2).
> +
> +Test case: Fortville create same rule after destroy
> +===================================================
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i
> --disable-rss --rxq=16 --txq=16
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. verify rules can be create after destroy::
> +
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end
> actions queue index 2 / end
> + testpmd>flow destroy 0 rule 0
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is
> + 32 / end actions queue index 2 / end
How to verify it?
> +
> +3. send packets match rule::
> +
> + pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
> +
> +4. send packets not match rule::
> +
> + pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
> +
What's the purpose of 3 and 4? I don't see any verification.
Same comments for next test case.
> +Test case: Fortville create different rule after destroy
> +=======================================================
> +
> +1. Launch the app ``testpmd`` with the following arguments::
> +
> + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i
> --disable-rss --rxq=16 --txq=16
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. verify rules can be create after destroy::
> +
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end
> actions queue index 2 / end
> + testpmd>flow destroy 0 rule 0
> + testpmd>flow create 0 ingress pattern eth / ipv4 / udp dst is
> + 32 / end actions queue index 2 / end
> +
> +3. send packets match rule::
> +
> + pkt1 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
> +
> +4. send packets not match rule::
> +
> + pkt2 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
> --
> 2.32.0
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-10 6:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-30 13:51 [dts] [PATCH V1] test_plans/generic_flow_api: add two test cases Lingli Chen
2021-08-02 9:52 ` Lin, Xueqin
2021-07-30 14:10 Lingli Chen
2021-08-10 6:23 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).