Signed-off-by: David Liu <dliu@iol.unh.edu>
---
 test_plans/MTU_test_plan.rst | 35 ++++++++++++++++++++++++
 tests/TestSuite_MTU.py       | 53 ++++++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+)
 create mode 100644 test_plans/MTU_test_plan.rst
 create mode 100644 tests/TestSuite_MTU.py

diff --git a/test_plans/MTU_test_plan.rst b/test_plans/MTU_test_plan.rst
new file mode 100644
index 0000000..c343748
--- /dev/null
+++ b/test_plans/MTU_test_plan.rst
@@ -0,0 +1,35 @@
+=============================================
+MTU Check
+=============================================
+
+This check will use testpmmd to check if MTU is set to 1500/2400/4800/9000
+as required and appear in the set status.
+
+Prerequisites
+=============
+
+Compile DPDK and testpmd. Be able to have the testpmd run.
+
+Test Case: set MTU size
+==========================================
+
+Run testpmd in interactive mode ::
+
+  $ ./dpdk-testpmd -- -i
+
+This can be run with other arguments as well, depending on your setup.
+
+(port_id) - the id for the port you are working on.
+The port has to be stopped before setting MTU size.
+Run this command in testpmd ::
+
+  testpmd> port stop (port_id)
+
+(mtu_size) - the size for MTU you want to set.
+Run this command in testpmd ::
+  testpmd> port config mtu (mtu_size)
+
+(port_id) - the id for the port you are working on.
+Verify the output from matches with the correct size::
+  testpmd> show port info (port_id)
+
diff --git a/tests/TestSuite_MTU.py b/tests/TestSuite_MTU.py
new file mode 100644
index 0000000..e84e23c
--- /dev/null
+++ b/tests/TestSuite_MTU.py
@@ -0,0 +1,53 @@
+"""
+DPDK Test suite.
+Testing MTU with different szie in testpmd
+"""
+
+import utils
+import time
+from test_case import TestCase
+from pmd_output import PmdOutput
+
+class TestMTU(TestCase):
+
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        """
+        self.dut.build_install_dpdk(self.target)
+        self.pmdout = PmdOutput(self.dut)
+        self.pmdout.start_testpmd()
+        self.dut_ports = self.dut.get_ports()
+
+    def set_up(self):
+        """ 
+        Run before each test case.       
+        Nothing to do.
+        """ 
+        pass
+
+    def set_MTU_size(self):
+        """
+        Run port config mtu $port $size to set size and check if they have the right value
+        """
+        MTU_sizes = [1500, 2400, 4800, 9000]
+        for size in MTU_sizes:
+            for port in self.dut_ports:
+                self.dut.send_command('port stop {}'.format(port))
+                self.dut.send_command('port config mtu {} {}'.format(port, size))
+                port_info = self.dut.send_command('show port {} {}'.format('info', port))
+                self.verify(str(size) in port_info, 'MTU size set {}'.format(size))
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        Nothing to do.
+        """ 
+        pass
+
+    def tear_down_all(self):
+        """
+        Quit out of testpmd
+        """
+        self.dut.send_expect("quit", "# ", 30)   
+       
--
2.17.1