From: "Tang, HaifengX" <haifengx.tang@intel.com>
To: "Fu, JingguoX" <jingguox.fu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [DTS][PATCH V2 1/2] scatter: add scatter test suite
Date: Fri, 29 May 2015 02:42:09 +0000 [thread overview]
Message-ID: <DF029FFF923C334FAA58CEEB2979DCA601552B91@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1432802208-27520-1-git-send-email-jingguox.fu@intel.com>
>
>
>-----Original Message-----
>From: Fu, JingguoX
>Sent: Thursday, May 28, 2015 4:37 PM
>To: dts@dpdk.org
>Cc: Xu, HuilongX; Tang, HaifengX; Fu, JingguoX
>Subject: [DTS][PATCH V2 1/2] scatter: add scatter test suite
>
>Signed-off-by: Jingguo Fu <jingguox.fu@intel.com>
>---
> tests/TestSuite_scatter.py | 132 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 132 insertions(+)
> create mode 100644 tests/TestSuite_scatter.py
>
>diff --git a/tests/TestSuite_scatter.py b/tests/TestSuite_scatter.py new file mode 100644 index 0000000..2ce5965
>--- /dev/null
>+++ b/tests/TestSuite_scatter.py
>@@ -0,0 +1,132 @@
>+# BSD LICENSE
>+#
>+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
>+# All rights reserved.
>+#
>+# Redistribution and use in source and binary forms, with or without #
>+modification, are permitted provided that the following conditions #
>+are met:
>+#
>+# * Redistributions of source code must retain the above copyright
>+# notice, this list of conditions and the following disclaimer.
>+# * Redistributions in binary form must reproduce the above copyright
>+# notice, this list of conditions and the following disclaimer in
>+# the documentation and/or other materials provided with the
>+# distribution.
>+# * Neither the name of Intel Corporation nor the names of its
>+# contributors may be used to endorse or promote products derived
>+# from this software without specific prior written permission.
>+#
>+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
>+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
>+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
>+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
>+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
>+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
>+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
>+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
>+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
>+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
>+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>+
>+"""
>+DPDK Test suite.
>+Test Scattered Packets.
>+"""
>+import dts
>+from test_case import TestCase
>+from pmd_output import PmdOutput
>+
>+EHTERNET_HEADER = 18
>+IP_HEADER = 20
>+DEFAULT_MBUF_SIZE = 2048
>+JUMBO_FRAME_MTU = 9000
>+STANDARD_MTU = 1500
>+#
>+#
>+# Test class.
>+#
>+class TestScatter(TestCase):
>+ #
>+ #
>+ #
>+ # Test cases.
>+ #
>+ def set_up_all(self):
>+ """
>+ Run at the start of each test suite.
>+ Scatter Prerequistites
>+ """
>+ dutPorts = self.dut.get_ports(self.nic)
>+ # Verify that enough ports are available
>+ self.verify(len(dutPorts) >= 2, "Insufficient ports")
>+ self.pmdout = PmdOutput(self.dut)
>+
>+ def scatter_pktgen_send_packet(self, sPortid, rPortid, pktsize, num=1):
>+ """
>+ Functional test for scatter packets.
>+ """
>+ sport = self.tester.get_local_port(sPortid)
>+ sintf = self.tester.get_interface(sport)
>+ smac = self.dut.get_mac_address(sPortid)
>+ rport = self.tester.get_local_port(rPortid)
>+ rintf = self.tester.get_interface(rport)
>+ self.tester.send_expect("ifconfig %s mtu %s" % (sintf, JUMBO_FRAME_MTU), "#")
>+ self.tester.send_expect("ifconfig %s mtu %s" % (rintf,
>+ JUMBO_FRAME_MTU), "#")
>+
>+ self.tester.scapy_background()
>+ self.tester.scapy_append(
>+ 'p = sniff(filter="ip",iface="%s", count=%d)' % (rintf, num))
>+ self.tester.scapy_append('RESULT = str(p)')
>+
>+ pktlen = pktsize - EHTERNET_HEADER
>+ padding = pktlen - IP_HEADER
>+
>+ self.tester.scapy_foreground()
>+ self.tester.scapy_append(
>+ 'sendp([Ether(dst="%s")/IP(len=%s)/Raw(load="\x50"*%s)], iface="%s")' % (smac, pktlen, padding, sintf))
>+ self.tester.scapy_execute()
>+ res = self.tester.scapy_get_result()
>+ self.tester.send_expect("ifconfig %s mtu %s" % (sintf, STANDARD_MTU), "#")
>+ self.tester.send_expect("ifconfig %s mtu %s" % (rintf, STANDARD_MTU), "#")
>+ return res
>+
>+ def set_up(self):
>+ """
>+ Run before each test case.
>+ """
>+ pass
>+
>+ def test_scatter_mbuf(self):
>+ """
>+ Scatter 2048 mbuf
>+ """
>+ dutPorts = self.dut.get_ports(self.nic)
>+ portMask = dts.create_mask(dutPorts[:2])
>+
>+ # set the mbuf size to 1024
>+ out = self.pmdout.start_testpmd(
>+ "Default", "--mbcache=200 --mbuf-size=%s --portmask=%s --max-pkt-len=%s" % (DEFAULT_MBUF_SIZE,portMask, JUMBO_FRAME_MTU))
>+ self.verify("Error" not in out, "launch error 1")
>+ self.dut.send_expect("set fwd mac", "testpmd> ", 120)
>+ self.dut.send_expect("start", "testpmd> ")
>+
>+ for offset in [-1, 0, 1, 4, 5]:
>+ ret = self.scatter_pktgen_send_packet(
>+ dutPorts[0], dutPorts[1], DEFAULT_MBUF_SIZE + offset)
>+ self.verify("load='P" in ret, "packet receive error")
>+
>+ self.dut.send_expect("stop", "testpmd> ")
>+ self.dut.send_expect("quit", "# ", 30)
>+
>+ def tear_down(self):
>+ """
>+ Run after each test case.
>+ """
>+ pass
>+
>+ def tear_down_all(self):
>+ """
>+ Run after each test suite.
>+ """
>+ pass
>--
>2.1.0
Acked-by: Haifeng Tang <haifengx.tang@intel.com>
prev parent reply other threads:[~2015-05-29 2:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 8:36 Jingguo Fu
2015-05-28 8:36 ` [dts] [DTS][PATCH V2 2/2] scatter: add scatter test plan Jingguo Fu
2015-05-28 8:42 ` [dts] [DTS][PATCH V2 1/2] scatter: add scatter test suite Xu, HuilongX
2015-05-29 2:42 ` Tang, HaifengX [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF029FFF923C334FAA58CEEB2979DCA601552B91@SHSMSX103.ccr.corp.intel.com \
--to=haifengx.tang@intel.com \
--cc=dts@dpdk.org \
--cc=jingguox.fu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).