From: "Tang, HaifengX" <haifengx.tang@intel.com>
To: "Liu, Yong" <yong.liu@intel.com>,
"Van Haaren, Harry" <harry.van.haaren@intel.com>,
"dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [DTS][PATCH] fix tx crc issue
Date: Thu, 26 Nov 2015 10:29:45 +0000 [thread overview]
Message-ID: <DF029FFF923C334FAA58CEEB2979DCA60298A78E@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <86228AFD5BCD8E4EBFD2B90117B5E81E10F6F296@SHSMSX103.ccr.corp.intel.com>
Yeah, I will check the nic again. thanks
-----Original Message-----
From: Liu, Yong
Sent: Thursday, November 26, 2015 9:26 AM
To: Van Haaren, Harry; Tang, HaifengX; dts@dpdk.org
Subject: RE: [dts] [DTS][PATCH] fix tx crc issue
Thanks for clear the message, Harry. Haifeng, please take care packet length of kawela_4. If it's different from other NICs, please submit one work request for it.
> -----Original Message-----
> From: Van Haaren, Harry
> Sent: Wednesday, November 25, 2015 7:12 PM
> To: Liu, Yong; Tang, HaifengX; dts@dpdk.org
> Subject: RE: [dts] [DTS][PATCH] fix tx crc issue
>
> Hi All,
>
> Recently I've removed all CRC bytes from the byte counter statistics.
>
> This means when --crc-strip is enabled, or disabled, the byte counters
> should remain the same.
>
> These changes apply to igb, ixgbe, i40e, while fmk10k already strips
> CRC bytes from its counters.
>
> These patches were merged into dpdk.org master recently, commits
> 156c5a8 e1000/igb
> c03fcee ixgbe
> 0834d15 i40e
>
>
> Note that VLAN stripping will still affect byte stats, same as before.
>
>
> If there are any questions regarding testing the byte statistics, feel
> free to ask.
>
> -Harry
>
>
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Liu, Yong
> > Sent: Wednesday, November 25, 2015 9:25 AM
> > To: Tang, HaifengX <haifengx.tang@intel.com>; dts@dpdk.org
> > Subject: Re: [dts] [DTS][PATCH] fix tx crc issue
> >
> > Some comments below, thanks.
> >
> > > -----Original Message-----
> > > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of haifeng
> > > Sent: Wednesday, November 25, 2015 3:56 PM
> > > To: dts@dpdk.org
> > > Subject: [dts] [DTS][PATCH] fix tx crc issue
> > >
> > > Signed-off-by: haifeng <haifengx.tang@intel.com>
> > > ---
> > > tests/TestSuite_shutdown_api.py | 27 ++++++++-------------------
> > > 1 file changed, 8 insertions(+), 19 deletions(-)
> > >
> > > diff --git a/tests/TestSuite_shutdown_api.py
> > > b/tests/TestSuite_shutdown_api.py index 23888f4..411e4bf 100644
> > > --- a/tests/TestSuite_shutdown_api.py
> > > +++ b/tests/TestSuite_shutdown_api.py
> > > @@ -82,7 +82,7 @@ class TestShutdownApi(TestCase):
> > > stats = output.get_pmd_stats(portid)
> > > return stats
> > >
> > > - def check_forwarding(self, ports=None, pktSize=68, received=True,
> > > vlan=False, promisc=False, crcStrip=False):
> > > + def check_forwarding(self, ports=None, pktSize=68,
> > > + received=True,
> > > vlan=False, promisc=False, crcStrip=True):
> >
> > The parameter "crcStrip" here is mean enable crc strip feature on port.
> > Please do not change the default for most case not enable crc strip.
> >
> > If packet length not include crc all the time, this parameter will
> > be
> useless.
> > Please remove it from function parameters.
> >
> > > if ports is None:
> > > ports = self.ports
> > > if len(ports) == 1:
> > > @@ -146,25 +146,14 @@ class TestShutdownApi(TestCase):
> > > # RRC will always strip rx/tx vlan
> > > rx_bytes_exp -= 4
> > > tx_bytes_exp -= 4
> > > - elif self.nic in ["fortville_eagle", "fortville_spirit",
> > > - "fortville_spirit_single", "bartonhills"]:
> > > - # some NIC will always strip tx crc
> > > - tx_bytes_exp -= 4
> > > - if vlan is True:
> > > - # vlan strip default is on
> > > - tx_bytes_exp -= 4
> > > - elif self.nic in ["springville", "powerville"]:
> > > - if vlan is True:
> > > - # vlan strip default is on
> > > - tx_bytes_exp -= 4
> > > else:
> > > - # some NIC will always include tx crc
> > > - if crcStrip is True:
> > > - rx_bytes_exp -= 4
> > > - if vlan is True:
> > > - # vlan strip default is on
> > > - tx_bytes_exp -= 4
> > > -
> >
> > Here maybe one bug for all packet length should be the same between NICs.
> >
> > > + if self.nic not in ['kawela_4']:
> > > + tx_bytes_exp -= 4
> > > + if crcStrip is True:
> > > + rx_bytes_exp -= 4
> > > + if vlan is True:
> > > + tx_bytes_exp -= 4
> > > +
> > > if received:
> > > self.verify(p0tx_pkts == p1rx_pkts, "Wrong TX pkts
> p0_tx=%d,
> > > p1_rx=%d" % (p0tx_pkts, p1rx_pkts))
> > > self.verify(p1rx_bytes == rx_bytes_exp, "Wrong Rx
> > > bytes p1_rx=%d, expect=%d" % (p1rx_bytes, rx_bytes_exp))
> > > --
> > > 1.9.3
next prev parent reply other threads:[~2015-11-26 10:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 7:55 haifeng
2015-11-25 9:18 ` Liu, Yong
2015-11-25 9:24 ` Liu, Yong
2015-11-25 11:11 ` Van Haaren, Harry
2015-11-26 1:26 ` Liu, Yong
2015-11-26 10:29 ` Tang, HaifengX [this message]
2015-11-25 10:36 ` Xu, HuilongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF029FFF923C334FAA58CEEB2979DCA60298A78E@SHSMSX103.ccr.corp.intel.com \
--to=haifengx.tang@intel.com \
--cc=dts@dpdk.org \
--cc=harry.van.haaren@intel.com \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).