From: "Chen, LingliX" <linglix.chen@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V1] tests/TestSuite_shutdown_api/check_rxtx_desc_status_add_foxville_and_powerville_queue_num
Date: Tue, 28 Jul 2020 03:29:54 +0000 [thread overview]
Message-ID: <DF0AE4FB1473EC4698A1C81C0B35CF85E9530C@CDSMSX102.ccr.corp.intel.com> (raw)
In-Reply-To: <20200728030055.13502-1-linglix.chen@intel.com>
[-- Attachment #1: Type: text/plain, Size: 1435 bytes --]
Tested-by: Chen, LingliX <linglix.chen@intel.com>
Regards,
Chen, LingliX
-----Original Message-----
From: Chen, LingliX
Sent: Tuesday, July 28, 2020 11:01 AM
To: dts@dpdk.org
Cc: Chen, LingliX <linglix.chen@intel.com>
Subject: [dts][PATCH V1] tests/TestSuite_shutdown_api/check_rxtx_desc_status_add_foxville_and_powerville_queue_num
The maximum number of queues for foxville is 4,for powerville is 8
Signed-off-by: Chen Linglix <linglix.chen@intel.com>
---
tests/TestSuite_shutdown_api.py | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tests/TestSuite_shutdown_api.py b/tests/TestSuite_shutdown_api.py index 0eead85..edd1dcf 100644
--- a/tests/TestSuite_shutdown_api.py
+++ b/tests/TestSuite_shutdown_api.py
@@ -797,8 +797,10 @@ class TestShutdownApi(TestCase):
When tx_descriptor_status is used, status can be “FULL”, “DONE” or “UNAVAILABLE.”
"""
queue_num=16
- if self.nic in ["springville"]:
+ if self.nic in ["springville","foxville"]:
queue_num=4
+ if self.nic in ["powerville"]:
+ queue_num=8
self.pmdout.start_testpmd("Default",
"--portmask=%s --port-topology=loop --txq=%s --rxq=%s --txd=4096 --rxd=4096"
% (utils.create_mask(self.ports),queue_num,queue_num), socket=self.ports_socket)
--
1.8.3.1
[-- Attachment #2: TestShutdownApi-foxville.log --]
[-- Type: application/octet-stream, Size: 5578 bytes --]
28/07/2020 11:08:57 dts:
TEST SUITE : TestShutdownApi
28/07/2020 11:08:57 dts: NIC : foxville
28/07/2020 11:08:57 dut.10.240.183.171:
28/07/2020 11:08:57 tester:
28/07/2020 11:08:57 tester: ifconfig eno4 mtu 5000
28/07/2020 11:08:57 tester:
28/07/2020 11:08:57 TestShutdownApi: Test Case test_check_rxtx_desc_status Begin
28/07/2020 11:08:57 dut.10.240.183.171:
28/07/2020 11:08:57 tester:
28/07/2020 11:08:57 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:81:00.0 -w 0000:86:00.0 --file-prefix=dpdk_18387_20200728110840 -- -i --portmask=0x1 --port-topology=loop --txq=4 --rxq=4 --txd=4096 --rxd=4096
28/07/2020 11:08:59 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_18387_20200728110840/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1)
EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 2 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 00:A0:C9:00:00:00
Configuring Port 1 (socket 1)
Port 1: 00:A0:C9:00:00:00
Checking link statuses...
Done
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 1 desc 2032 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 1 desc 2032 status
Desc status = AVAILABLE
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 210 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 210 status
Desc status = DONE
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 0 desc 324 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 0 desc 324 status
Desc status = AVAILABLE
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 0 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 0 status
Desc status = DONE
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 3 desc 208 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 rxq 3 desc 208 status
Desc status = AVAILABLE
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 379 status
28/07/2020 11:09:09 dut.10.240.183.171: show port 0 txq 1 desc 379 status
Desc status = DONE
28/07/2020 11:09:09 TestShutdownApi: Test Case test_check_rxtx_desc_status Result PASSED:
28/07/2020 11:09:09 dut.10.240.183.171: kill_all: called by dut and prefix list has value.
28/07/2020 11:09:11 dut.10.240.183.171: Killed
[PEXPECT]#
28/07/2020 11:09:12 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:81:00.0 -w 0000:86:00.0 --file-prefix=dpdk_18387_20200728110840 -- -i --portmask=0x1 --port-topology=loop
28/07/2020 11:09:13 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_18387_20200728110840/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1)
EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 2 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 00:A0:C9:00:00:00
Configuring Port 1 (socket 1)
Port 1: 00:A0:C9:00:00:00
Checking link statuses...
Done
28/07/2020 11:09:23 dut.10.240.183.171: set link-up port 0
28/07/2020 11:09:24 dut.10.240.183.171: set link-up port 0
28/07/2020 11:09:24 dut.10.240.183.171: port start all
28/07/2020 11:09:24 dut.10.240.183.171: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
28/07/2020 11:09:24 dut.10.240.183.171: quit
28/07/2020 11:09:25 dut.10.240.183.171: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Bye...
28/07/2020 11:09:25 dts:
TEST SUITE ENDED: TestShutdownApi
[-- Attachment #3: TestShutdownApi-powerville.log --]
[-- Type: application/octet-stream, Size: 6521 bytes --]
28/07/2020 11:11:08 dts:
TEST SUITE : TestShutdownApi
28/07/2020 11:11:08 dts: NIC : powerville
28/07/2020 11:11:08 dut.10.240.183.171:
28/07/2020 11:11:08 tester:
28/07/2020 11:11:08 tester: ifconfig ens2f0 mtu 5000
28/07/2020 11:11:08 tester:
28/07/2020 11:11:08 TestShutdownApi: Test Case test_check_rxtx_desc_status Begin
28/07/2020 11:11:08 dut.10.240.183.171:
28/07/2020 11:11:08 tester:
28/07/2020 11:11:08 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:83:00.0 -w 0000:83:00.1 -w 0000:83:00.2 -w 0000:83:00.3 --file-prefix=dpdk_18751_20200728111044 -- -i --portmask=0x1 --port-topology=loop --txq=8 --rxq=8 --txd=4096 --rxd=4096
28/07/2020 11:11:11 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_18751_20200728111044/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.0 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.1 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.2 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.3 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 4 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: B4:96:91:49:98:CC
Configuring Port 1 (socket 1)
Port 1: B4:96:91:49:98:CD
Configuring Port 2 (socket 1)
Port 2: B4:96:91:49:98:CE
Configuring Port 3 (socket 1)
Port 3: B4:96:91:49:98:CF
Checking link statuses...
Done
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 6 desc 3671 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 6 desc 3671 status
Desc status = AVAILABLE
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 5 desc 504 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 5 desc 504 status
Desc status = DONE
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 1 desc 406 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 1 desc 406 status
Desc status = AVAILABLE
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 6 desc 507 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 6 desc 507 status
Desc status = DONE
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 4 desc 3270 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 rxq 4 desc 3270 status
Desc status = AVAILABLE
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 7 desc 158 status
28/07/2020 11:11:21 dut.10.240.183.171: show port 0 txq 7 desc 158 status
Desc status = DONE
28/07/2020 11:11:21 TestShutdownApi: Test Case test_check_rxtx_desc_status Result PASSED:
28/07/2020 11:11:21 dut.10.240.183.171: kill_all: called by dut and prefix list has value.
28/07/2020 11:11:23 dut.10.240.183.171: Killed
[PEXPECT]#
28/07/2020 11:11:24 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:83:00.0 -w 0000:83:00.1 -w 0000:83:00.2 -w 0000:83:00.3 --file-prefix=dpdk_18751_20200728111044 -- -i --portmask=0x1 --port-topology=loop
28/07/2020 11:11:26 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_18751_20200728111044/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.0 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.1 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.2 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.3 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 4 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: B4:96:91:49:98:CC
Configuring Port 1 (socket 1)
Port 1: B4:96:91:49:98:CD
Configuring Port 2 (socket 1)
Port 2: B4:96:91:49:98:CE
Configuring Port 3 (socket 1)
Port 3: B4:96:91:49:98:CF
Checking link statuses...
Done
28/07/2020 11:11:36 dut.10.240.183.171: set link-up port 0
28/07/2020 11:11:36 dut.10.240.183.171: set link-up port 0
Port 0: link state change event
28/07/2020 11:11:36 dut.10.240.183.171: port start all
28/07/2020 11:11:36 dut.10.240.183.171: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Port 2 is now not stopped
Port 3 is now not stopped
Please stop the ports first
Done
28/07/2020 11:11:36 dut.10.240.183.171: quit
28/07/2020 11:11:39 dut.10.240.183.171: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Stopping port 3...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Shutting down port 3...
Closing ports...
Done
Bye...
28/07/2020 11:11:39 dts:
TEST SUITE ENDED: TestShutdownApi
next prev parent reply other threads:[~2020-07-28 3:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-28 3:00 Chen Linglix
2020-07-28 3:29 ` Chen, LingliX [this message]
2020-08-12 6:21 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF0AE4FB1473EC4698A1C81C0B35CF85E9530C@CDSMSX102.ccr.corp.intel.com \
--to=linglix.chen@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).