* [dts] [PATCH V3 1/2] add ip_pipeline config_file test code
@ 2016-08-29 9:40 xu,gang
2016-08-29 9:40 ` [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan xu,gang
2016-09-02 1:08 ` [dts] [PATCH V3 1/2] add ip_pipeline config_file test code Xu, HuilongX
0 siblings, 2 replies; 4+ messages in thread
From: xu,gang @ 2016-08-29 9:40 UTC (permalink / raw)
To: dts; +Cc: xu,gang
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
tests/TestSuite_ip_pipeline_config_file.py | 254 +++++++++++++++++++++++++++++
1 file changed, 254 insertions(+)
create mode 100644 tests/TestSuite_ip_pipeline_config_file.py
diff --git a/tests/TestSuite_ip_pipeline_config_file.py b/tests/TestSuite_ip_pipeline_config_file.py
new file mode 100644
index 0000000..f2fe1fc
--- /dev/null
+++ b/tests/TestSuite_ip_pipeline_config_file.py
@@ -0,0 +1,254 @@
+#BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test ip_pipeline_configuration file.
+"""
+
+import dts
+import string
+import time
+import re
+import os
+from test_case import TestCase
+from plotting import Plotting
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from packet import Packet, sniff_packets, load_sniff_packets
+
+class Test_ip_pipeline_configuration_file(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 4, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = dts.create_mask(cores)
+
+ self.dut.send_expect("chmod 777 /root/","#",30)
+ con = self.dut.send_expect("sed -n '510,520p' config/common_base","Compile librte_table",30)
+ self.verify("CONFIG_RTE_PORT_PCAP=y" in con, "CONFIG_RTE_PORT_PCAP=n")
+
+ #unpack test configuration
+ cwd = os.getcwd()
+ self.tester.send_expect("cd %s/dep/" % cwd,"# ",50)
+ result = self.tester.send_expect("tar xzvf ip_pipeline.tar.gz","# ",50)
+ self.verify("error" not in result, "ip_pipeline unpack fail ")
+
+ self.packag_ip_pipeline()
+
+ #copy configuration file to dut and unpack
+ self.dut.session.copy_file_to("dep/ip_pipeline.tar.gz")
+ put = self.dut.send_expect("tar -zxvf ~/ip_pipeline.tar.gz -C ~","#",500)
+ #self.verify("error" not in put, "ip_pipeline unpack fail")
+
+ self.path = "./examples/ip_pipeline/build/ip_pipeline"
+
+ # build sample app
+ out = self.dut.build_dpdk_apps("./examples/ip_pipeline")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def replace_pci(self,filename,old,new):
+ """
+ modify the file by new code
+ """
+ try:
+ lines = open(filename,'r').readlines()
+ flen = len(lines)
+ for i in range(flen):
+ if old in lines[i]:
+ lines[i] = lines[i].replace(old,new)
+ open(filename,'w').writelines(lines)
+ except Exception,e:
+ print e
+
+ def packag_ip_pipeline(self):
+ """
+ modify the ip_pipeline cfg file's pci and pack again
+ """
+ po_rootdir = "dep/ip_pipeline/ip_pipeline_link_identification/postive/"
+ for po_parent,po_dirnames,po_filenames in os.walk(po_rootdir):
+ for i in po_filenames:
+ filename = po_parent + i
+ self.replace_pci(filename,"port0","%s" % self.dut.ports_info[0]['pci'])
+ self.replace_pci(filename,"port1","%s" % self.dut.ports_info[1]['pci'])
+ self.replace_pci(filename,"port2","%s" % self.dut.ports_info[2]['pci'])
+ self.replace_pci(filename,"port3","%s" % self.dut.ports_info[3]['pci'])
+ ne_rootdir = "dep/ip_pipeline/ip_pipeline_link_identification/negative/"
+ for ne_parent,ne_dirnames,ne_filenames in os.walk(ne_rootdir):
+ for i in ne_filenames:
+ filename = ne_parent + i
+ self.replace_pci(filename,"port0","%s" % self.dut.ports_info[0]['pci'])
+ self.replace_pci(filename,"port1","%s" % self.dut.ports_info[1]['pci'])
+ self.replace_pci(filename,"port2","%s" % self.dut.ports_info[2]['pci'])
+ self.replace_pci(filename,"port3","%s" % self.dut.ports_info[3]['pci'])
+ self.tester.send_expect("rm -rf ip_pipeline.tar.gz","#",10)
+ result = self.tester.send_expect("tar -czvf ip_pipeline.tar.gz ip_pipeline/","#",50)
+ self.verify("error" not in result, "ip_pipeline compression fail")
+ self.tester.send_expect("cd ../","#",10)
+
+ def scapy_send_package(self,num):
+ """
+ Send a packet to port
+ """
+ txport = self.tester.get_local_port(self.dut_ports[0])
+ mac = self.dut.get_mac_address(self.dut_ports[0])
+ txItf = self.tester.get_interface(txport)
+ self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)], iface="%s",count=%s)' % (mac, txItf,num))
+ self.tester.scapy_execute()
+
+ def test_ip_pipeline_cfg(self):
+ cfg_po_rootdir = "dep/ip_pipeline/ip_pipeline_cfg/postive/"
+ for cfg_po_parent,cfg_po_dirnames,cfg_po_filenames in os.walk(cfg_po_rootdir):
+ for cfg_po_filename in cfg_po_filenames:
+ cmd = self.path + " -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/%s" % cfg_po_filename
+ self.dut.send_expect(cmd,"[PIPELINE1]",50)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % cfg_po_filename)
+ cfg_ne_rootdir = "dep/ip_pipeline/ip_pipeline_cfg/negative/"
+ for cfg_ne_parent,cfg_ne_dirnames,cfg_ne_filenames in os.walk(cfg_ne_rootdir):
+ for cfg_ne_filename in cfg_ne_filenames:
+ cmd = self.path + " -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/negative/%s" % cfg_ne_filename
+ out = self.dut.send_expect(cmd,"# ",50)
+ self.dut.send_expect("quit","# ",10)
+ self.verify("error" in out, "Test failed on %s" % cfg_ne_filename)
+
+ def test_ip_pipeline_cpu_utilization(self):
+ cmd = self.path + " -p 0xf -f ./examples/ip_pipeline/config/edge_router_downstream.cfg -s ./examples/ip_pipeline/config/edge_router_downstream.sh"
+ self.dut.send_expect(cmd,"#p 1 route ls",50)
+ self.scapy_send_package(1000)
+ self.dut.send_expect("","pipeline> ",5)
+ out = self.dut.send_expect("t 1 headroom","pipeline> ",10)
+ self.dut.send_expect("quit","# ",10)
+ self.verify(out == "100%" , "headroom error")
+
+ def test_ip_pipeline_link_identification(self):
+ link_po_rootdir = "dep/ip_pipeline/ip_pipeline_link_identification/postive/"
+ for link_po_parent,link_po_dirnames,link_po_filenames in os.walk(link_po_rootdir):
+ for link_po_filename in link_po_filenames:
+ if "_f" in link_po_filename:
+ cmd = self.path + " -f ~/ip_pipeline/ip_pipeline_link_identification/postive/%s" % link_po_filename
+ self.dut.send_expect(cmd,"[PIPELINE1]",50)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % link_po_filename)
+ elif "_pf" in link_po_filename:
+ cmd = self.path + " -p f -f ~/ip_pipeline/ip_pipeline_link_identification/postive/%s" % link_po_filename
+ self.dut.send_expect(cmd,"[PIPELINE1]",50)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % link_po_filename)
+ link_ne_rootdir = "dep/ip_pipeline/ip_pipeline_link_identification/negative/"
+ for link_ne_parent,link_ne_dirnames,link_ne_filenames in os.walk(link_ne_rootdir):
+ for link_ne_filename in link_ne_filenames:
+ if "_f" in link_ne_filename:
+ cmd = self.path + " -p 0x3 -f ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" % link_ne_filename
+ out = self.dut.send_expect(cmd,"# ",50)
+ self.dut.send_expect("quit","# ",10)
+ self.verify("error" in out, "Test failed on %s" % link_ne_filename)
+ elif "_1p" in link_ne_filename:
+ cmd = self.path + " -p 1 -f ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" % link_ne_filename
+ out = self.dut.send_expect(cmd,"# ",50)
+ self.dut.send_expect("quit","# ",10)
+ self.verify("error" in out, "Test failed on %s" % link_ne_filename)
+
+ elif "_3p" in link_ne_filename:
+ cmd = self.path + " -p 3 -f ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" % link_ne_filename
+ out = self.dut.send_expect(cmd,"#",50)
+ self.dut.send_expect("quit","# ",10)
+ self.verify("error" in out, "Test failed on %s" % link_ne_filename)
+
+
+ def test_ip_pipeline_parser_cleanup(self):
+ parser_po_rootdir = "dep/ip_pipeline/ip_pipeline_parser_cleanup/postive/"
+ for parser_po_parent,parser_po_dirnames,parser_po_filenames in os.walk(parser_po_rootdir):
+ for parser_po_filename in parser_po_filenames:
+ cmd = self.path + " -p 0x3 -f ~/ip_pipeline/ip_pipeline_parser_cleanup/postive/%s" % parser_po_filename
+ self.dut.send_expect(cmd,"[PIPELINE1]",50)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % parser_po_filename)
+
+ parser_ne_rootdir = "dep/ip_pipeline/ip_pipeline_parser_cleanup/negative/"
+ for parser_ne_parent,parser_ne_dirnames,parser_ne_filenames in os.walk(parser_ne_rootdir):
+ for parser_ne_filename in parser_ne_filenames:
+ cmd = self.path + " -p 0x3 -f ~/ip_pipeline/ip_pipeline_parser_cleanup/negative/%s" % parser_ne_filename
+ out = self.dut.send_expect(cmd,"# ",50)
+ self.verify("error" in out, "Test failed on %s" % parser_ne_filename)
+
+ def test_ip_pipeline_source_sink(self):
+ source_sink_po_rootdir = "dep/ip_pipeline/ip_pipeline_source_sink/postive/"
+ for source_sink_po_parent,source_sink_po_dirnames,source_sink_po_filenames in os.walk(source_sink_po_rootdir):
+ for source_sink_po_filename in source_sink_po_filenames:
+ self.dut.send_expect("cp ~/ip_pipeline/*.pcap ~","#",50)
+ if "_com" in source_sink_po_filename:
+ cmd = self.path + " -f ~/ip_pipeline/ip_pipeline_source_sink/postive/%s" % source_sink_po_filename
+ self.dut.send_expect(cmd,"PORT: Dumped",50)
+ time.sleep(10)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % source_sink_po_filename)
+ else:
+ cmd = self.path + " -f ~/ip_pipeline/ip_pipeline_source_sink/postive/%s" % source_sink_po_filename
+ self.dut.send_expect(cmd,"[PIPELINE1]",50)
+ out = self.dut.send_expect("quit","# ",10)
+ self.verify("Bye!" in out, "Test failed on %s" % source_sink_po_filename)
+ self.dut.send_expect("rm -rf ~/*.pcap","#",50)
+
+
+ source_sink_ne_rootdir = "dep/ip_pipeline/ip_pipeline_source_sink/negative/"
+ for source_sink_ne_parent,source_sink_ne_dirnames,source_sink_ne_filenames in os.walk(source_sink_ne_rootdir):
+ for source_sink_ne_filename in source_sink_ne_filenames:
+ self.dut.send_expect("cp ~/ip_pipeline/*.pcap ~","#",50)
+ cmd = self.path + " -f ~/ip_pipeline/ip_pipeline_source_sink/negative/%s" % source_sink_ne_filename
+ out = self.dut.send_expect(cmd,"# ",50)
+ self.verify("error" in out, "Test failed on %s" % source_sink_ne_filename)
+ self.dut.send_expect("rm -rf ~/*.pcap","#",50)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan
2016-08-29 9:40 [dts] [PATCH V3 1/2] add ip_pipeline config_file test code xu,gang
@ 2016-08-29 9:40 ` xu,gang
2016-10-10 8:52 ` Xu, Qian Q
2016-09-02 1:08 ` [dts] [PATCH V3 1/2] add ip_pipeline config_file test code Xu, HuilongX
1 sibling, 1 reply; 4+ messages in thread
From: xu,gang @ 2016-08-29 9:40 UTC (permalink / raw)
To: dts; +Cc: xu,gang
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
test_plans/ip_pipeline_config_file_test_plan.rst | 2971 ++++++++++++++++++++++
1 file changed, 2971 insertions(+)
create mode 100644 test_plans/ip_pipeline_config_file_test_plan.rst
diff --git a/test_plans/ip_pipeline_config_file_test_plan.rst b/test_plans/ip_pipeline_config_file_test_plan.rst
new file mode 100644
index 0000000..038fff3
--- /dev/null
+++ b/test_plans/ip_pipeline_config_file_test_plan.rst
@@ -0,0 +1,2971 @@
+.. BSD LICENSE
+ Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+Test Case: test_ip_pipeline_cfg
+===============================
+
+cfg file default-FIREWALL.cfg
+-----------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FIREWALL
+n_rules = 1
+pkt_type = ipv4
+
+Run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-FLOW_ACTIONS.cfg
+---------------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-FLOW_CLASSIFICATION.cfg
+------------------------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-PASS-THROUGH.cfg
+---------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = PASS-THROUGH
+dma_size = 16
+dma_dst_offset = 64
+dma_src_offset = 150
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 80
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-ROUTING.cfg
+----------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules-1.cfg
+------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules-4294967295.cfg
+----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 4294967295
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-pkt_type-qinq_ipv4.cfg
+----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = qinq_ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-pkt_type-vlan_ipv4.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = vlan_ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-color_offset-0.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 0
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-color_offset-4294967295.cfg
+------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 4294967295
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-0.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 0
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-4294967295.cfg
+--------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 4294967295
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_flows-2.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 2
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_flows-4096.cfg
+--------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-4.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-0.cfg
+---------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-4294967295.cfg
+-------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 4294967295
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-0.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 0
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-4294967295.cfg
+--------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 4294967295
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_size-16.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_size-8.cfg
+------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 8
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg filetest-FLOW_CLASSIFICATION-n_flows-2147483648.cfg
+-------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 2147483648
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-2.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 2
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-ip_hdr_offset-0.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-ip_hdr_offset-4294967295.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 4294967295
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-n_routes-1.cfg
+-------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 1
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-n_routes-4294967295.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4294967295
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules--1.cfg
+-------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = -1
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FIREWALL-n_rules-4294967296.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 4294967296
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FIREWALL-pkt_type-abcde.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = abcde
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-color_offset--1.cfg
+----------------------------------------------[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = -1
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-color_offset-4294967296.cfg
+--------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 4294967296
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-flow_id_offset--1.cfg
+------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = -1
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-4294967296.cfg
+---------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 4294967296
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-ip_hdr_offset--1.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = -1
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-ip_hdr_offset-4294967296.cfg
+----------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 4294967296
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows-0.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 0
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows--1.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = -1
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows-4294967296.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4294967296
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-0.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-5.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 5
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset--1.cfg
+-------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = -1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-4294967296.cfg
+-----------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 4294967296
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_offset--1.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = -1
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-4294967296.cfg
+---------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 4294967296
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_size-7.cfg
+---------------------------------------------------
+PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 7
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-0.cfg
+-------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 0
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows--1.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = -1
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-4294967296.cfg
+------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4294967296
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-ip_hdr_offset--1.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = -1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-ip_hdr_offset-4294967296.cfg
+------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 4294967296
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-n_routes--1.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = -1
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-n_routes-4294967296.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4294967296
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+
+
+Test Case: test_ip_pipeline_cpu_utilization
+===========================================
+running ip_pipeline_cpu_utilization with the command::
+ ./examples/ip_pipeline/build/ip_pipeline -p 0xf -f ./examples/ip_pipeline/config/edge_router_downstream.cfg -s ./examples/ip_pipeline/config/edge_router_downstream.sh
+
+then::
+ send package my scapy tool
+
+check::
+ pipeline>t 1 headroom
+if is 100% the test pass, else fail
+Test Case: test_ip_pipeline_link_identification
+===============================================
+
+Description
+Link identification has 2 goals, first is to create a brand new option in CFG file's LINK
+section, so a link can be confgiured specific physical port using the PCI address. So the
+user can either use original "-p" option, or the new LINK section item to identify the
+physical port he/she wants to use; Second is to maintain the original "-p" option as it is.
+That is, the following logic shall be applied so that two ways will not mix.
+
+--------------------------------------------------------------------
+ |a. "-p" cmd option exists | b. "-p" cmd option not exist
+--------------------------------------------------------------------
+1 |EAL section "pci_whitelist" |EAL section "pci_whitelist" is
+ |option is allowed and optional |NOT allowed
+--------------------------------------------------------------------
+2 |LINK section "pci_bdf" option |LINK section "pci_bdf" option
+ |is NOT allowed |is MANDATORY
+------------------------------------------------------------------------
+
+1. Regression for all the old CFG files(regression team should cover it)
+------------------------------------------------------------------------
+
+----------------------------------------------------------------
+2. CFG file containing 1 "pci_whitelist" section with "-p" exist shall work
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 1 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": too many elements
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+Run the command ./build/ip_pipeline -p 1 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+3. CFG file containing 2 "pci_whitelist" sections with "-p" exists
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": too many elements
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+
+
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+4. CFG file containing 4 "pci_whitelist" sections with "-p" exists
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[EAL]
+pci_whitelist = 0000:83:00.0
+pci_whitelist = 0000:83:00.1
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+Run the command ./build/ip_pipeline -p f -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+5. CFG file containing "pci_bdf" in LINK section shall NOT work with "-p" exists
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+6. CFG file containing "pci_bdf" in LINK section and EAL section shall NOT work with "-p" exists(EAL and LINK not matches)
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:83:00.0
+pci_whitelist = 0000:83:00.1
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+7. CFG file containing "pci_bdf" in LINK section and EAL section shall NOT work with "-p" exists(EAL and LINK matches)
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+8. CFG file containing "pci_whitelist" in EAL section shall NOT work with "-p" absence
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": entry to be generated by the application (port_mask not provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+
+----------------------------------------------------------------
+9. CFG file containing "pci_bdf" in 1 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0
+pktq_out = TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+10. CFG file containing "pci_bdf" in 2 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+11. CFG file containing "pci_bdf" in 4 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[LINK0]
+pci_bdf = 0000:83:00.0
+
+[LINK1]
+pci_bdf = 0000:83:00.1
+
+[LINK2]
+pci_bdf = 0000:85:00.0
+
+[LINK3]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+12. CFG file containing "pci_bdf" in 1 LINK sections and 2 LINKS exists shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+13. CFG file containing "pci_bdf" in 1 LINK sections and 2 LINKS exists shall NOT work with "-p" exists
+[root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ~/config/link_identification/link_iden_case_13.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped)
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+Test Case: test_ip_pipeline_parser_cleanup
+=========================================
+
+1. Test config parser for pipeline passthrough
+
+2. Test config parser for pipeline flow classification(need to test based on bugs raised)
+
+3. Test config parser for pipeline flow action
+
+4. Test config parser for pipeline firewall
+
+5. Test config parser for pipeline routing
+
+6. Add multiple whitespaces between argumetns in pktq_in/out and msgq_in/out section
+
+7. Create cfg files with all kinds of errors(like the section not supposed to be there, or out of range value)
+
+8. In pipeline specific cfg section, write n_rules=4k/64k/512k/16M and check if the table memory have the same size of n_rules=4096/65536... exact values
+(problems is how to check the table memory, need to check with dev???)
+
+--------------------------------------------------
+1. An invalid entry should be recognized(negative)
+--------------------------------------------------
+Config file as follows, pipeline is passthrough
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+lb = hash
+test = 123
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+check that an invalid entry is recognized by config parser, "lb" is not a recognized entry, it should report the error, if yes, test pass, otherwise, test fail
+
+pipeline> [APP] Initializing PIPELINE1 ...
+[PIPELINE1] Pass-through
+Parse error in section "PIPELINE1": invalid entry "test"
+PANIC in app_init_pipelines():
+Pipeline instance "PIPELINE1" back-end init error
+7: [./build/ip_pipeline() [0x432615]]
+6: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x33dca21d65]]
+5: [./build/ip_pipeline(main+0x5f) [0x43187f]]
+4: [./build/ip_pipeline(app_init+0x15b8) [0x4419e8]]
+3: [./build/ip_pipeline() [0x43f85b]]
+2: [./build/ip_pipeline(__rte_panic+0xc9) [0x42c33c]]
+1: [./build/ip_pipeline(rte_dump_stack+0x1a) [0x4d5dca]]
+Aborted (core dumped)
+
+--------------------------------------------------------------
+2. Multiple whitespaces between arguments in pktq_in entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of pktq_in. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+3. Multiple whitespaces between arguments in pktq_out entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of pktq_out. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+4. Multiple whitespaces between arguments in msgq_in entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = s0c0
+;msgq_in = MSGQ-REQ-PIPELINE0 ; for customer in .cfg.out, can not assign in .cfg file, because these are used as the communication for master and other pipeline.
+;msgq_out = MSGQ-RSP-PIPELINE0
+timer_period = 1
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s0c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-REQ-PIPELINE1, dev will confirm on how to use it
+msgq_out = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-RSP-PIPELINE1
+timer_period = 100
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of msgq_in. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+5. Multiple whitespaces between arguments in msgq_out entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = s0c0
+;msgq_in = MSGQ-REQ-PIPELINE0
+;msgq_out = MSGQ-RSP-PIPELINE0
+timer_period = 1
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s0c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-REQ-PIPELINE1
+msgq_out = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-RSP-PIPELINE1
+timer_period = 100
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of msgq_in. If yes, test passed, otherwise, test failed.
+
+-----------------------------------
+6. Not recognized section(negative)
+-----------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+
+[TESTSECTION]
+type = flow classification
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_2ports.cfg
+Check that the config parser can report out the invalid section and print out "CFG:....." messages. If yes, test passed, otherwise, test failed.
+
+---------------------------------
+7. Not recognized entry(negative)
+---------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+test = value
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_2ports.cfg
+Check that the config parser can report out the invalid section and print out "CFG:....." messages. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+8. Check that the n_rules can equal to 4k and the table memory have the same size of n_rules=4096(need to check with dev how to check the table memory)
+firewall can not be seem, use flow classifcaion, n_flows, check table size
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 397440 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 4k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_flows=4096 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+9. Check that the n_rules can equal to 64k and the table memory have the same size of n_rules=65536(need to check with dev how to check the table memory)
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 6357120 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 64k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=65536 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+10. Check that the n_rules can equal to 512k and the table memory have the same size of n_rules=524288(need to check with dev how to check the table memory)
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 50856064 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 512k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=524288 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+11. Check that the n_rules can equal to 16M and the table memory have the same size of n_rules=16777216(need to check with dev how to check the table memory), maximum is 2^32, use 2^32+1 to test out of range
+[PIPELINE2] Flow classification
+
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 1627390080 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 16M
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=16777216 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+12. Check that the n_rules can equal to 16M+1 and the table memory have the same size of n_rules=16777216(need to check with dev how to check the table memory), maximum is 2^32, use 2^32+1 to test out of range
+[PIPELINE2] Flow classification
+Parse error in section "PIPELINE2": entry "n_flows" has invalid value ("16M+1")
+PANIC in app_init_pipelines():
+Pipeline instance "PIPELINE2" back-end init error
+7: [./build/ip_pipeline() [0x431925]]
+6: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x33dca21d65]]
+5: [./build/ip_pipeline(main+0x5f) [0x4304ff]]
+4: [./build/ip_pipeline(app_init+0x13fb) [0x43f3bb]]
+3: [./build/ip_pipeline() [0x43d449]]
+2: [./build/ip_pipeline(__rte_panic+0xc9) [0x42af1a]]
+1: [./build/ip_pipeline(rte_dump_stack+0x1a) [0x4c8c6a]]
+Aborted (core dumped)
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 16M+1
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app reports errors, if yes, test pass, otherwise, test fail
+
+Test Case: test_ip_pipeline_source_sink
+=======================================
+
+1. change the CONFIG_RTE_PORT_PCAP compiler option lies in config/common_base
+2. config file should be use source and sink not rxq and txq, config file as follows
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+3. Since there is only source/sink port in the config file, there is no physical port, so it should be no -p in the command line, command should be as follows
+./build/ip_pipeline -f ./config/config_file_name.cfg
+4. change the folder/file to the pcap file to be root, for example, pcap is installed in the folder /home/anna/file.pcap, then should use linux command
+chmod 777 /home
+chmod 777 /anna
+chmod 777 file.pcap
+5. pcap_bytes_rd_per_pkt can be 0 or anyother value, 0 means read whole frame, which takes more memory, if only need IP header, then it can be 64,
+which saves lots of memory
+
+
+----------------------------------------------------------
+1. Functional test for source port on passthrough pipeline
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+--------------------------------------------------------
+2. Functional test for sink port on passthrough pipeline
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+---------------------------------------------------------------
+3. Functional test for source+sink port on passthrough pipeline
+---------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /home/eth1.1.pcap /home/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-------------------------------------------------
+4. Same pcap read file, different pcap write file
+-------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 81
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_1.cfg
+
+After the app finsihed runing, check that the eth1.1.pcap and eth2.1.pcap have the same first 80 frames, and check that the eth2.1.pcap have 81 frames
+1st frame and 81th frame should be the same frame, which is the first 64 bytes of 1st frame of eth1.pcap file.
+
+--------------------------------------------------
+5. Same pcap write file, different pcap read file
+--------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth1.1.pcap
+pcap_n_pkt_wr = 80 200
+comand to run
+./build/ip_pipeline -f ./config/source_sink_port_2.cfg
+After the app finished runing, check that the eth1.1.pcap should have 200?(280?) frames, check that the app finished runing correctly
+
+-----------------------------------------------------
+6. pcap_n_pkt_wr equals 0, continuous write sink file
+-----------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 0 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_3.cfg
+After the app finished running, check that the eth1.pcap should have more than 80 frames, check that the eth2.1.pcap have 200 frames
+
+--------------------------------
+7. 4 source port and 4 sink port
+--------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2 SOURCE3
+pktq_out = SINK0 SINK1 SINK2 SINK3
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap /root/eth1.pcap /root/eth1.1.pcap
+pcap_bytes_rd_per_pkt = 0 64 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap /root/eth3.1.pcap /root/eth4.1.pcap
+pcap_n_pkt_wr = 80 200 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_4.cfg
+After the app finished running, check that the eth1.1.pcap and eth5.pcap should have the same size and frames, eth2.1.pcap and eth6.pcap should
+have the sme size and frames
+
+----------------------------------------------------------------
+8. Add source and sink into the EDGE_ROUTER_DOWNSTREAM.CFG, need to check with zhang, fan about which pipeline to add the SOURCE/SINK
+----------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2 SOURCE3
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap /root/eth1.pcap /root/eth1.1.pcap
+pcap_bytes_rd_per_pkt = 0 64 0 64
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SINK0 SINK1 SINK2 SINK3
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap /root/eth3.1.pcap /root/eth4.1.pcap
+pcap_n_pkt_wr = 80 200 80 200
+
+[MEMPOOL0]
+pool_size = 512
+
+only use 1 or 2 ports pcap_n_pkt_wr = 80
+
+---------------------------------------
+9. Source port and sink port not paired, negative
+---------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+-----------------------------------------
+10. Source port and pcap file read not paired, negative
+-----------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 0 200
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+-----------------------------------------------------
+11. Source port and pcap bytes read per packet not paired, negative
+-----------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+--------------------------------------------
+12. Sink port and pcap file write not paired, negative
+--------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+------------------------------------------------
+13. Sink port and pcap n packet write not paired, negative
+------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcaplast modified time, if it's the same, test pass,
+otherwise, test fail
+
+-------------------------------------------------------------------
+14. Functional test for source port on flow classification pipeline (Fan will double check it)
+-------------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+-----------------------------------------------------------------
+15. Functional test for sink port on flow classification pipeline
+-----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_wr = /root/eth1.pcap /root/eth2.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+------------------------------------------------------------------------
+16. Functional test for source+sink port on flow classification pipeline(need to run with rules)
+------------------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+17. Functional test for source port on flow action pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+18. Functional test for sink port on flow action pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+19. Functional test for source+sink port on flow action pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+20. Functional test for source port on rt arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+21. Functional test for sink port on rt arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+22. Functional test for source+sink port on rt arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+23. Functional test for source port on rt arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+24. Functional test for sink port on rt arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+25. Functional test for source+sink port on rt arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+26. Functional test for source port on rt mpls arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+;pcap_file_wr = /home/fanzhan2/eth3.pcap /home/fanzhan2/eth2.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+27. Functional test for sink port on rt mpls arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+;pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+;pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+28. Functional test for source+sink port on rt mpls arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+29. Functional test for source port on rt mpls arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+30. Functional test for sink port on rt mpls arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+31. Functional test for source+sink port on rt mpls arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+32. Functional test for source port on rt qinq arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+;pcap_file_wr = /home/fanzhan2/eth3.pcap /home/fanzhan2/eth2.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+33. Functional test for sink port on rt qinq arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+;pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+;pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+34. Functional test for source+sink port on rt qinq arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+35. Functional test for source port on rt qinq arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+36. Functional test for sink port on rt qinq arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+37. Functional test for source+sink port on rt qinq arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+----------------------------------------------------------
+38. Functional test for source port on passthrough pipeline for pcap_file_rd
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+----------------------------------------------------------
+39. Functional test for source port on passthrough pipeline for pcap_file_rd and pcap_bytes_rd_per_pkt(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports parser errors successfully and quit, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+40. Functional test for source port on passthrough pipeline for pcap_file_rd_per_pkt(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports parser errors successfully and quit, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+41. Functional test for sink port on passthrough pipeline for pcap_file_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+42. Functional test for sink port on passthrough pipeline for pcap_file_wr and pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+43. Functional test for sink port on passthrough pipeline for pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------
+44. Functional test for source port on passthrough pipeline for pcap_file_rd(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports errors successfully and quit normally, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+45. Functional test for source port on passthrough pipeline for pcap_file_rd and pcap_bytes_rd_per_pkt
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app runs successfully and quit, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+46. Functional test for source port on passthrough pipeline for pcap_file_rd_per_pkt
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app runs successfully and quit, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+47. Functional test for sink port on passthrough pipeline for pcap_file_wr(negative)
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+Check the app reports parser errors successfully, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+48. Functional test for sink port on passthrough pipeline for pcap_file_wr and pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+49. Functional test for sink port on passthrough pipeline for pcap_n_pkt_wr(negative)
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+Check that the app reports parser errors successfully, then test pass, otherwise, test fail
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V3 1/2] add ip_pipeline config_file test code
2016-08-29 9:40 [dts] [PATCH V3 1/2] add ip_pipeline config_file test code xu,gang
2016-08-29 9:40 ` [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan xu,gang
@ 2016-09-02 1:08 ` Xu, HuilongX
1 sibling, 0 replies; 4+ messages in thread
From: Xu, HuilongX @ 2016-09-02 1:08 UTC (permalink / raw)
To: Xu, GangX, dts; +Cc: Xu, GangX
Hi gang,
Pls see my comments as below.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,gang
> Sent: Monday, August 29, 2016 5:41 PM
> To: dts@dpdk.org
> Cc: Xu, GangX
> Subject: [dts] [PATCH V3 1/2] add ip_pipeline config_file test code
>
> Signed-off-by: xu,gang <gangx.xu@intel.com>
> ---
> tests/TestSuite_ip_pipeline_config_file.py | 254
> +++++++++++++++++++++++++++++
> 1 file changed, 254 insertions(+)
> create mode 100644 tests/TestSuite_ip_pipeline_config_file.py
>
> diff --git a/tests/TestSuite_ip_pipeline_config_file.py
> b/tests/TestSuite_ip_pipeline_config_file.py
> new file mode 100644
> index 0000000..f2fe1fc
> --- /dev/null
> +++ b/tests/TestSuite_ip_pipeline_config_file.py
> @@ -0,0 +1,254 @@
> +#BSD LICENSE
> +#
> +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Test ip_pipeline_configuration file.
> +"""
> +
> +import dts
> +import string
> +import time
> +import re
> +import os
> +from test_case import TestCase
> +from plotting import Plotting
> +from settings import HEADER_SIZE
> +from etgen import IxiaPacketGenerator
> +from packet import Packet, sniff_packets, load_sniff_packets
> +
> +class Test_ip_pipeline_configuration_file(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 4, "Insufficient ports")
> + cores = self.dut.get_core_list("1S/4C/1T")
> + self.coremask = dts.create_mask(cores)
> +
> + self.dut.send_expect("chmod 777 /root/","#",30)
Why you want update /root path permissions? If you must do it, pls use ~ to replace /root
Because not all os the root path is /root.
> + con = self.dut.send_expect("sed -n '510,520p'
> config/common_base","Compile librte_table",30)
> + self.verify("CONFIG_RTE_PORT_PCAP=y" in con,
> "CONFIG_RTE_PORT_PCAP=n")
You should change CONFIG_RTE_PORT_PCAP value to "y" in your test suite.
> +
> + #unpack test configuration
> + cwd = os.getcwd()
> + self.tester.send_expect("cd %s/dep/" % cwd,"# ",50)
> + result = self.tester.send_expect("tar xzvf
> ip_pipeline.tar.gz","# ",50)
> + self.verify("error" not in result, "ip_pipeline unpack fail ")
> +
Maybe you can use "update_ip_pipeline_config" for replace "package_ip_pipeline"
Because you change config file in function package_ip_pipeline.
> + self.packag_ip_pipeline()
> +
> + #copy configuration file to dut and unpack
> + self.dut.session.copy_file_to("dep/ip_pipeline.tar.gz")
> + put = self.dut.send_expect("tar -zxvf ~/ip_pipeline.tar.gz -C
> ~","#",500)
> + #self.verify("error" not in put, "ip_pipeline unpack fail")
A suggest:
You can get config file list in setup_all function, not in every case.
Because your case only used different file in different path.
The config file list as below:
self.confile_path = '~/ip_pipeline/'
self.confile_dict = {"ip_pipeline_cfg_postive":["ip_pipeline_cfg/postive/file1"," ip_pipeline_cfg/postive/file2",...,],
"ip_pipeline_cfg_negative ":[" ip_pipeline_cfg/negative/file3"," ip_pipeline_cfg/negative/file4",...,],
...,
}
In case ip_pipeline_cfg you can design it as below:
if "ip_pipeline_cfg_postive" in self.confie_dict:
for file in self.confile_dict["ip_pipeline_cfg_postive"]:
confile = self.confile_path + file
cmdline = self.path + '-f %s' % confile
...
else:
self. Verify(false, "no ip_pipeline_cfg positive configfile")
> +
> + self.path = "./examples/ip_pipeline/build/ip_pipeline"
> +
> + # build sample app
> + out = self.dut.build_dpdk_apps("./examples/ip_pipeline")
> + self.verify("Error" not in out, "compilation error 1")
> + self.verify("No such file" not in out, "compilation error 2")
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def replace_pci(self,filename,old,new):
> + """
> + modify the file by new code
> + """
> + try:
> + lines = open(filename,'r').readlines()
> + flen = len(lines)
> + for i in range(flen):
> + if old in lines[i]:
> + lines[i] = lines[i].replace(old,new)
> + open(filename,'w').writelines(lines)
> + except Exception,e:
> + print e
> +
> + def packag_ip_pipeline(self):
> + """
> + modify the ip_pipeline cfg file's pci and pack again
> + """
> + po_rootdir =
> "dep/ip_pipeline/ip_pipeline_link_identification/postive/"
> + for po_parent,po_dirnames,po_filenames in os.walk(po_rootdir):
> + for i in po_filenames:
> + filename = po_parent + i
> + self.replace_pci(filename,"port0","%s" %
> self.dut.ports_info[0]['pci'])
> + self.replace_pci(filename,"port1","%s" %
> self.dut.ports_info[1]['pci'])
> + self.replace_pci(filename,"port2","%s" %
> self.dut.ports_info[2]['pci'])
> + self.replace_pci(filename,"port3","%s" %
> self.dut.ports_info[3]['pci'])
> + ne_rootdir =
> "dep/ip_pipeline/ip_pipeline_link_identification/negative/"
> + for ne_parent,ne_dirnames,ne_filenames in os.walk(ne_rootdir):
> + for i in ne_filenames:
> + filename = ne_parent + i
> + self.replace_pci(filename,"port0","%s" %
> self.dut.ports_info[0]['pci'])
> + self.replace_pci(filename,"port1","%s" %
> self.dut.ports_info[1]['pci'])
> + self.replace_pci(filename,"port2","%s" %
> self.dut.ports_info[2]['pci'])
> + self.replace_pci(filename,"port3","%s" %
> self.dut.ports_info[3]['pci'])
> + self.tester.send_expect("rm -rf ip_pipeline.tar.gz","#",10)
> + result = self.tester.send_expect("tar -czvf ip_pipeline.tar.gz
> ip_pipeline/","#",50)
> + self.verify("error" not in result, "ip_pipeline compression
> fail")
> + self.tester.send_expect("cd ../","#",10)
> +
> + def scapy_send_package(self,num):
> + """
> + Send a packet to port
> + """
> + txport = self.tester.get_local_port(self.dut_ports[0])
> + mac = self.dut.get_mac_address(self.dut_ports[0])
> + txItf = self.tester.get_interface(txport)
> +
> self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18
> )], iface="%s",count=%s)' % (mac, txItf,num))
> + self.tester.scapy_execute()
> +
> + def test_ip_pipeline_cfg(self):
> + cfg_po_rootdir = "dep/ip_pipeline/ip_pipeline_cfg/postive/"
> + for cfg_po_parent,cfg_po_dirnames,cfg_po_filenames in
> os.walk(cfg_po_rootdir):
> + for cfg_po_filename in cfg_po_filenames:
> + cmd = self.path + " -p 0x3 -f
> ~/ip_pipeline/ip_pipeline_cfg/postive/%s" % cfg_po_filename
> + self.dut.send_expect(cmd,"[PIPELINE1]",50)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> cfg_po_filename)
> + cfg_ne_rootdir = "dep/ip_pipeline/ip_pipeline_cfg/negative/"
> + for cfg_ne_parent,cfg_ne_dirnames,cfg_ne_filenames in
> os.walk(cfg_ne_rootdir):
> + for cfg_ne_filename in cfg_ne_filenames:
> + cmd = self.path + " -p 0x3 -f
> ~/ip_pipeline/ip_pipeline_cfg/negative/%s" % cfg_ne_filename
> + out = self.dut.send_expect(cmd,"# ",50)
> + self.dut.send_expect("quit","# ",10)
> + self.verify("error" in out, "Test failed on %s" %
> cfg_ne_filename)
> +
> + def test_ip_pipeline_cpu_utilization(self):
> + cmd = self.path + " -p 0xf -
> f ./examples/ip_pipeline/config/edge_router_downstream.cfg -
> s ./examples/ip_pipeline/config/edge_router_downstream.sh"
> + self.dut.send_expect(cmd,"#p 1 route ls",50)
> + self.scapy_send_package(1000)
> + self.dut.send_expect("","pipeline> ",5)
> + out = self.dut.send_expect("t 1 headroom","pipeline> ",10)
> + self.dut.send_expect("quit","# ",10)
> + self.verify(out == "100%" , "headroom error")
> +
> + def test_ip_pipeline_link_identification(self):
> + link_po_rootdir =
> "dep/ip_pipeline/ip_pipeline_link_identification/postive/"
> + for link_po_parent,link_po_dirnames,link_po_filenames in
> os.walk(link_po_rootdir):
> + for link_po_filename in link_po_filenames:
> + if "_f" in link_po_filename:
> + cmd = self.path + " -f
> ~/ip_pipeline/ip_pipeline_link_identification/postive/%s" %
> link_po_filename
> + self.dut.send_expect(cmd,"[PIPELINE1]",50)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> link_po_filename)
> + elif "_pf" in link_po_filename:
> + cmd = self.path + " -p f -f
> ~/ip_pipeline/ip_pipeline_link_identification/postive/%s" %
> link_po_filename
> + self.dut.send_expect(cmd,"[PIPELINE1]",50)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> link_po_filename)
> + link_ne_rootdir =
> "dep/ip_pipeline/ip_pipeline_link_identification/negative/"
> + for link_ne_parent,link_ne_dirnames,link_ne_filenames in
> os.walk(link_ne_rootdir):
> + for link_ne_filename in link_ne_filenames:
> + if "_f" in link_ne_filename:
> + cmd = self.path + " -p 0x3 -f
> ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" %
> link_ne_filename
> + out = self.dut.send_expect(cmd,"# ",50)
> + self.dut.send_expect("quit","# ",10)
> + self.verify("error" in out, "Test failed on %s" %
> link_ne_filename)
> + elif "_1p" in link_ne_filename:
> + cmd = self.path + " -p 1 -f
> ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" %
> link_ne_filename
> + out = self.dut.send_expect(cmd,"# ",50)
> + self.dut.send_expect("quit","# ",10)
> + self.verify("error" in out, "Test failed on %s" %
> link_ne_filename)
> +
> + elif "_3p" in link_ne_filename:
> + cmd = self.path + " -p 3 -f
> ~/ip_pipeline/ip_pipeline_link_identification/negative/%s" %
> link_ne_filename
> + out = self.dut.send_expect(cmd,"#",50)
> + self.dut.send_expect("quit","# ",10)
> + self.verify("error" in out, "Test failed on %s" %
> link_ne_filename)
> +
> +
> + def test_ip_pipeline_parser_cleanup(self):
> + parser_po_rootdir =
> "dep/ip_pipeline/ip_pipeline_parser_cleanup/postive/"
> + for parser_po_parent,parser_po_dirnames,parser_po_filenames in
> os.walk(parser_po_rootdir):
> + for parser_po_filename in parser_po_filenames:
> + cmd = self.path + " -p 0x3 -f
> ~/ip_pipeline/ip_pipeline_parser_cleanup/postive/%s" %
> parser_po_filename
> + self.dut.send_expect(cmd,"[PIPELINE1]",50)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> parser_po_filename)
> +
> + parser_ne_rootdir =
> "dep/ip_pipeline/ip_pipeline_parser_cleanup/negative/"
> + for parser_ne_parent,parser_ne_dirnames,parser_ne_filenames in
> os.walk(parser_ne_rootdir):
> + for parser_ne_filename in parser_ne_filenames:
> + cmd = self.path + " -p 0x3 -f
> ~/ip_pipeline/ip_pipeline_parser_cleanup/negative/%s" %
> parser_ne_filename
> + out = self.dut.send_expect(cmd,"# ",50)
> + self.verify("error" in out, "Test failed on %s" %
> parser_ne_filename)
> +
> + def test_ip_pipeline_source_sink(self):
> + source_sink_po_rootdir =
> "dep/ip_pipeline/ip_pipeline_source_sink/postive/"
> + for
> source_sink_po_parent,source_sink_po_dirnames,source_sink_po_filenames
> in os.walk(source_sink_po_rootdir):
> + for source_sink_po_filename in source_sink_po_filenames:
> + self.dut.send_expect("cp ~/ip_pipeline/*.pcap ~","#",50)
> + if "_com" in source_sink_po_filename:
> + cmd = self.path + " -f
> ~/ip_pipeline/ip_pipeline_source_sink/postive/%s" %
> source_sink_po_filename
> + self.dut.send_expect(cmd,"PORT: Dumped",50)
> + time.sleep(10)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> source_sink_po_filename)
> + else:
> + cmd = self.path + " -f
> ~/ip_pipeline/ip_pipeline_source_sink/postive/%s" %
> source_sink_po_filename
> + self.dut.send_expect(cmd,"[PIPELINE1]",50)
> + out = self.dut.send_expect("quit","# ",10)
> + self.verify("Bye!" in out, "Test failed on %s" %
> source_sink_po_filename)
> + self.dut.send_expect("rm -rf ~/*.pcap","#",50)
> +
> +
> + source_sink_ne_rootdir =
> "dep/ip_pipeline/ip_pipeline_source_sink/negative/"
> + for
> source_sink_ne_parent,source_sink_ne_dirnames,source_sink_ne_filenames
> in os.walk(source_sink_ne_rootdir):
> + for source_sink_ne_filename in source_sink_ne_filenames:
> + self.dut.send_expect("cp ~/ip_pipeline/*.pcap ~","#",50)
> + cmd = self.path + " -f
> ~/ip_pipeline/ip_pipeline_source_sink/negative/%s" %
> source_sink_ne_filename
> + out = self.dut.send_expect(cmd,"# ",50)
> + self.verify("error" in out, "Test failed on %s" %
> source_sink_ne_filename)
> + self.dut.send_expect("rm -rf ~/*.pcap","#",50)
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
You should set CONFIG_RTE_PORT_PCAP=n and compile dpdk again, in this function.
> + pass
> --
> 1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan
2016-08-29 9:40 ` [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan xu,gang
@ 2016-10-10 8:52 ` Xu, Qian Q
0 siblings, 0 replies; 4+ messages in thread
From: Xu, Qian Q @ 2016-10-10 8:52 UTC (permalink / raw)
To: Xu, GangX, dts, Wan, Qun, Liu, Yong; +Cc: Xu, GangX, Cao, Waterman
Hi, Marvin/Anna,
The patch of ip_pipeline automation is not merged. Marvin, what's your opinion?
So who will test the feature in the release 16.11? Thx.
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,gang
Sent: Monday, August 29, 2016 10:41 AM
To: dts@dpdk.org
Cc: Xu, GangX <gangx.xu@intel.com>
Subject: [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
test_plans/ip_pipeline_config_file_test_plan.rst | 2971 ++++++++++++++++++++++
1 file changed, 2971 insertions(+)
create mode 100644 test_plans/ip_pipeline_config_file_test_plan.rst
diff --git a/test_plans/ip_pipeline_config_file_test_plan.rst b/test_plans/ip_pipeline_config_file_test_plan.rst
new file mode 100644
index 0000000..038fff3
--- /dev/null
+++ b/test_plans/ip_pipeline_config_file_test_plan.rst
@@ -0,0 +1,2971 @@
+.. BSD LICENSE
+ Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+Test Case: test_ip_pipeline_cfg
+===============================
+
+cfg file default-FIREWALL.cfg
+-----------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FIREWALL
+n_rules = 1
+pkt_type = ipv4
+
+Run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-FLOW_ACTIONS.cfg
+---------------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-FLOW_CLASSIFICATION.cfg
+------------------------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-PASS-THROUGH.cfg
+---------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = PASS-THROUGH
+dma_size = 16
+dma_dst_offset = 64
+dma_src_offset = 150
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 80
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file default-ROUTING.cfg
+----------------------------
+;The default values are stored in this file
+[PIPELINE0]
+type = MASTER
+core = 0
+;PIPELINE1 all global variable
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules-1.cfg
+------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules-4294967295.cfg
+----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 4294967295
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-pkt_type-qinq_ipv4.cfg
+----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = qinq_ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-pkt_type-vlan_ipv4.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = vlan_ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-color_offset-0.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 0
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-color_offset-4294967295.cfg
+------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 4294967295
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-0.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 0
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-4294967295.cfg
+--------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 4294967295
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_flows-2.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 2
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_flows-4096.cfg
+--------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-4.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-0.cfg
+---------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-4294967295.cfg
+-------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 4294967295
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-0.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 0
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-4294967295.cfg
+--------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 4294967295
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_size-16.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-key_size-8.cfg
+------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 8
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg filetest-FLOW_CLASSIFICATION-n_flows-2147483648.cfg
+-------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 2147483648
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-2.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 2
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-ip_hdr_offset-0.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-ip_hdr_offset-4294967295.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 4294967295
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-n_routes-1.cfg
+-------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 1
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-ROUTING-n_routes-4294967295.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4294967295
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs successfully
+
+cfg file test-FIREWALL-n_rules--1.cfg
+-------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = -1
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FIREWALL-n_rules-4294967296.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 4294967296
+pkt_type = ipv4
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FIREWALL-pkt_type-abcde.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FIREWALL
+n_rules = 1
+pkt_type = abcde
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-color_offset--1.cfg
+----------------------------------------------[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = -1
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-color_offset-4294967296.cfg
+--------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 4294967296
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-flow_id_offset--1.cfg
+------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = -1
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-flow_id_offset-4294967296.cfg
+---------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 4294967296
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-ip_hdr_offset--1.cfg
+-----------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = -1
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-ip_hdr_offset-4294967296.cfg
+----------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 4294967296
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows-0.cfg
+------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 0
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows--1.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = -1
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_flows-4294967296.cfg
+----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4294967296
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-0.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 0
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_ACTIONS-n_meters_per_flow-5.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_ACTIONS
+n_flows = 4096
+flow_id_offset = 286
+color_offset = 192
+ip_hdr_offset = 270
+n_meters_per_flow = 5
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset--1.cfg
+-------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = -1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-hash_offset-4294967296.cfg
+-----------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 16
+hash_offset = 4294967296
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_offset--1.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = -1
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_offset-4294967296.cfg
+---------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 4294967296
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-key_size-7.cfg
+---------------------------------------------------
+PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4096
+key_offset = 192
+key_size = 7
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-0.cfg
+-------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 0
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows--1.cfg
+-----------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = -1
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-FLOW_CLASSIFICATION-n_flows-4294967296.cfg
+------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = FLOW_CLASSIFICATION
+n_flows = 4294967296
+key_offset = 192
+key_size = 16
+hash_offset = 208
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-ip_hdr_offset--1.cfg
+---------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = -1
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-ip_hdr_offset-4294967296.cfg
+------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4096
+ip_hdr_offset = 4294967296
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-n_routes--1.cfg
+-----------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = -1
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+cfg file test-ROUTING-n_routes-4294967296.cfg
+--------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+core = 1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0
+msgq_out = MSGQ0
+timer_period = 100
+type = ROUTING
+n_routes = 4294967296
+ip_hdr_offset = 270
+
+run the command ./build/ip_pipeline -p 0x3 -f ~/ip_pipeline/ip_pipeline_cfg/postive/filename, check that the app runs failure
+
+
+
+Test Case: test_ip_pipeline_cpu_utilization
+===========================================
+running ip_pipeline_cpu_utilization with the command::
+ ./examples/ip_pipeline/build/ip_pipeline -p 0xf -f ./examples/ip_pipeline/config/edge_router_downstream.cfg -s ./examples/ip_pipeline/config/edge_router_downstream.sh
+
+then::
+ send package my scapy tool
+
+check::
+ pipeline>t 1 headroom
+if is 100% the test pass, else fail
+Test Case: test_ip_pipeline_link_identification
+===============================================
+
+Description
+Link identification has 2 goals, first is to create a brand new option in CFG file's LINK
+section, so a link can be confgiured specific physical port using the PCI address. So the
+user can either use original "-p" option, or the new LINK section item to identify the
+physical port he/she wants to use; Second is to maintain the original "-p" option as it is.
+That is, the following logic shall be applied so that two ways will not mix.
+
+--------------------------------------------------------------------
+ |a. "-p" cmd option exists | b. "-p" cmd option not exist
+--------------------------------------------------------------------
+1 |EAL section "pci_whitelist" |EAL section "pci_whitelist" is
+ |option is allowed and optional |NOT allowed
+--------------------------------------------------------------------
+2 |LINK section "pci_bdf" option |LINK section "pci_bdf" option
+ |is NOT allowed |is MANDATORY
+------------------------------------------------------------------------
+
+1. Regression for all the old CFG files(regression team should cover it)
+------------------------------------------------------------------------
+
+----------------------------------------------------------------
+2. CFG file containing 1 "pci_whitelist" section with "-p" exist shall work
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 1 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": too many elements
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+Run the command ./build/ip_pipeline -p 1 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+3. CFG file containing 2 "pci_whitelist" sections with "-p" exists
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": too many elements
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+
+
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+4. CFG file containing 4 "pci_whitelist" sections with "-p" exists
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[EAL]
+pci_whitelist = 0000:83:00.0
+pci_whitelist = 0000:83:00.1
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+Run the command ./build/ip_pipeline -p f -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully
+
+----------------------------------------------------------------
+5. CFG file containing "pci_bdf" in LINK section shall NOT work with "-p" exists
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+6. CFG file containing "pci_bdf" in LINK section and EAL section shall NOT work with "-p" exists(EAL and LINK not matches)
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:83:00.0
+pci_whitelist = 0000:83:00.1
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+7. CFG file containing "pci_bdf" in LINK section and EAL section shall NOT work with "-p" exists(EAL and LINK matches)
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+----------------------------------------------------------------
+8. CFG file containing "pci_whitelist" in EAL section shall NOT work with "-p" absence
+([root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg
+Parse error in section "EAL", entry "pci_whitelist": entry to be generated by the application (port_mask not provided)
+
+Aborted (core dumped))
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[EAL]
+pci_whitelist = 0000:85:00.0
+pci_whitelist = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test fail, otherwise, test pass
+
+
+----------------------------------------------------------------
+9. CFG file containing "pci_bdf" in 1 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0
+pktq_out = TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+10. CFG file containing "pci_bdf" in 2 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+11. CFG file containing "pci_bdf" in 4 LINK sections shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
+pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
+
+[LINK0]
+pci_bdf = 0000:83:00.0
+
+[LINK1]
+pci_bdf = 0000:83:00.1
+
+[LINK2]
+pci_bdf = 0000:85:00.0
+
+[LINK3]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+12. CFG file containing "pci_bdf" in 1 LINK sections and 2 LINKS exists shall work with "-p" absence
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+----------------------------------------------------------------
+13. CFG file containing "pci_bdf" in 1 LINK sections and 2 LINKS exists shall NOT work with "-p" exists
+[root@dpdk_testserver03 ip_pipeline]# ./build/ip_pipeline -p 3 -f ~/config/link_identification/link_iden_case_13.cfg
+Parse error in section "LINK0", entry "pci_bdf": entry not allowed (port_mask is provided)
+
+Aborted (core dumped)
+----------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+
+[LINK0]
+pci_bdf = 0000:85:00.0
+
+[LINK1]
+pci_bdf = 0000:85:00.1
+Run the command ./build/ip_pipeline -p 3 -f ./config/pt1_2ports_link_iden.cfg, check that the app runs successfully, if yes, test pass, otherwise, test fail
+
+Test Case: test_ip_pipeline_parser_cleanup
+=========================================
+
+1. Test config parser for pipeline passthrough
+
+2. Test config parser for pipeline flow classification(need to test based on bugs raised)
+
+3. Test config parser for pipeline flow action
+
+4. Test config parser for pipeline firewall
+
+5. Test config parser for pipeline routing
+
+6. Add multiple whitespaces between argumetns in pktq_in/out and msgq_in/out section
+
+7. Create cfg files with all kinds of errors(like the section not supposed to be there, or out of range value)
+
+8. In pipeline specific cfg section, write n_rules=4k/64k/512k/16M and check if the table memory have the same size of n_rules=4096/65536... exact values
+(problems is how to check the table memory, need to check with dev???)
+
+--------------------------------------------------
+1. An invalid entry should be recognized(negative)
+--------------------------------------------------
+Config file as follows, pipeline is passthrough
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+lb = hash
+test = 123
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+check that an invalid entry is recognized by config parser, "lb" is not a recognized entry, it should report the error, if yes, test pass, otherwise, test fail
+
+pipeline> [APP] Initializing PIPELINE1 ...
+[PIPELINE1] Pass-through
+Parse error in section "PIPELINE1": invalid entry "test"
+PANIC in app_init_pipelines():
+Pipeline instance "PIPELINE1" back-end init error
+7: [./build/ip_pipeline() [0x432615]]
+6: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x33dca21d65]]
+5: [./build/ip_pipeline(main+0x5f) [0x43187f]]
+4: [./build/ip_pipeline(app_init+0x15b8) [0x4419e8]]
+3: [./build/ip_pipeline() [0x43f85b]]
+2: [./build/ip_pipeline(__rte_panic+0xc9) [0x42c33c]]
+1: [./build/ip_pipeline(rte_dump_stack+0x1a) [0x4d5dca]]
+Aborted (core dumped)
+
+--------------------------------------------------------------
+2. Multiple whitespaces between arguments in pktq_in entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of pktq_in. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+3. Multiple whitespaces between arguments in pktq_out entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of pktq_out. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+4. Multiple whitespaces between arguments in msgq_in entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = s0c0
+;msgq_in = MSGQ-REQ-PIPELINE0 ; for customer in .cfg.out, can not assign in .cfg file, because these are used as the communication for master and other pipeline.
+;msgq_out = MSGQ-RSP-PIPELINE0
+timer_period = 1
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s0c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-REQ-PIPELINE1, dev will confirm on how to use it
+msgq_out = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-RSP-PIPELINE1
+timer_period = 100
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of msgq_in. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+5. Multiple whitespaces between arguments in msgq_out entry
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = s0c0
+;msgq_in = MSGQ-REQ-PIPELINE0
+;msgq_out = MSGQ-RSP-PIPELINE0
+timer_period = 1
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s0c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ0.0 TXQ1.0
+msgq_in = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-REQ-PIPELINE1
+msgq_out = MSGQ0 MSGQ1 MSGQ2 MSGQ3 ;MSGQ-RSP-PIPELINE1
+timer_period = 100
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_mesgq_2ports.cfg
+Check that the config parser can recognize the multiple whitespaces between each argument of msgq_in. If yes, test passed, otherwise, test failed.
+
+-----------------------------------
+6. Not recognized section(negative)
+-----------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+
+[TESTSECTION]
+type = flow classification
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_2ports.cfg
+Check that the config parser can report out the invalid section and print out "CFG:....." messages. If yes, test passed, otherwise, test failed.
+
+---------------------------------
+7. Not recognized entry(negative)
+---------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = TXQ1.0 TXQ0.0
+dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
+dma_dst_offset = 128; mbuf (128)
+dma_size = 16
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
+dma_hash_offset = 144; (dma_dst_offset+dma_size)
+;lb = hash
+test = value
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/pt1_2ports.cfg
+Check that the config parser can report out the invalid section and print out "CFG:....." messages. If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+8. Check that the n_rules can equal to 4k and the table memory have the same size of n_rules=4096(need to check with dev how to check the table memory)
+firewall can not be seem, use flow classifcaion, n_flows, check table size
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 397440 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 4k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_flows=4096 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+9. Check that the n_rules can equal to 64k and the table memory have the same size of n_rules=65536(need to check with dev how to check the table memory)
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 6357120 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 64k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=65536 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+10. Check that the n_rules can equal to 512k and the table memory have the same size of n_rules=524288(need to check with dev how to check the table memory)
+[PIPELINE2] Flow classification
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 50856064 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 512k
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=524288 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+11. Check that the n_rules can equal to 16M and the table memory have the same size of n_rules=16777216(need to check with dev how to check the table memory), maximum is 2^32, use 2^32+1 to test out of range
+[PIPELINE2] Flow classification
+
+TABLE: rte_table_hash_create_key16_ext: Hash table memory footprint is 1627390080 bytes
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 16M
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app runs successfully and the table memory have the same size of n_rules=16777216 If yes, test passed, otherwise, test failed.
+
+--------------------------------------------------------------
+12. Check that the n_rules can equal to 16M+1 and the table memory have the same size of n_rules=16777216(need to check with dev how to check the table memory), maximum is 2^32, use 2^32+1 to test out of range
+[PIPELINE2] Flow classification
+Parse error in section "PIPELINE2": entry "n_flows" has invalid value ("16M+1")
+PANIC in app_init_pipelines():
+Pipeline instance "PIPELINE2" back-end init error
+7: [./build/ip_pipeline() [0x431925]]
+6: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x33dca21d65]]
+5: [./build/ip_pipeline(main+0x5f) [0x4304ff]]
+4: [./build/ip_pipeline(app_init+0x13fb) [0x43f3bb]]
+3: [./build/ip_pipeline() [0x43d449]]
+2: [./build/ip_pipeline(__rte_panic+0xc9) [0x42af1a]]
+1: [./build/ip_pipeline(rte_dump_stack+0x1a) [0x4c8c6a]]
+Aborted (core dumped)
+--------------------------------------------------------------
+Config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = PASS-THROUGH
+core = s1c1
+pktq_in = RXQ0.0 RXQ1.0
+pktq_out = SWQ0 SWQ1
+dma_size = 16
+dma_dst_offset = 192; mbuf (128) + 64
+dma_src_offset = 278; mbuf (128) + headroom (128) + ethernet header (14) + ttl offset within ip header (8) = 278
+dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF; ipv4 5-tuple
+dma_hash_offset = 208; dma_dst_offset + dma_size
+
+[PIPELINE2]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SWQ0 SWQ1
+pktq_out = TXQ1.0 TXQ0.0
+n_flows = 16M+1
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+
+Command to run: ./build/ip_pipeline -p 3 -f ./config/parsercleanup/fc_2ports.cfg
+Check that app reports errors, if yes, test pass, otherwise, test fail
+
+Test Case: test_ip_pipeline_source_sink
+=======================================
+
+1. change the CONFIG_RTE_PORT_PCAP compiler option lies in config/common_base
+2. config file should be use source and sink not rxq and txq, config file as follows
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+3. Since there is only source/sink port in the config file, there is no physical port, so it should be no -p in the command line, command should be as follows
+./build/ip_pipeline -f ./config/config_file_name.cfg
+4. change the folder/file to the pcap file to be root, for example, pcap is installed in the folder /home/anna/file.pcap, then should use linux command
+chmod 777 /home
+chmod 777 /anna
+chmod 777 file.pcap
+5. pcap_bytes_rd_per_pkt can be 0 or anyother value, 0 means read whole frame, which takes more memory, if only need IP header, then it can be 64,
+which saves lots of memory
+
+
+----------------------------------------------------------
+1. Functional test for source port on passthrough pipeline
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+--------------------------------------------------------
+2. Functional test for sink port on passthrough pipeline
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+---------------------------------------------------------------
+3. Functional test for source+sink port on passthrough pipeline
+---------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /home/eth1.1.pcap /home/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-------------------------------------------------
+4. Same pcap read file, different pcap write file
+-------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 81
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_1.cfg
+
+After the app finsihed runing, check that the eth1.1.pcap and eth2.1.pcap have the same first 80 frames, and check that the eth2.1.pcap have 81 frames
+1st frame and 81th frame should be the same frame, which is the first 64 bytes of 1st frame of eth1.pcap file.
+
+--------------------------------------------------
+5. Same pcap write file, different pcap read file
+--------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth1.1.pcap
+pcap_n_pkt_wr = 80 200
+comand to run
+./build/ip_pipeline -f ./config/source_sink_port_2.cfg
+After the app finished runing, check that the eth1.1.pcap should have 200?(280?) frames, check that the app finished runing correctly
+
+-----------------------------------------------------
+6. pcap_n_pkt_wr equals 0, continuous write sink file
+-----------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 0 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_3.cfg
+After the app finished running, check that the eth1.pcap should have more than 80 frames, check that the eth2.1.pcap have 200 frames
+
+--------------------------------
+7. 4 source port and 4 sink port
+--------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2 SOURCE3
+pktq_out = SINK0 SINK1 SINK2 SINK3
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap /root/eth1.pcap /root/eth1.1.pcap
+pcap_bytes_rd_per_pkt = 0 64 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap /root/eth3.1.pcap /root/eth4.1.pcap
+pcap_n_pkt_wr = 80 200 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port_4.cfg
+After the app finished running, check that the eth1.1.pcap and eth5.pcap should have the same size and frames, eth2.1.pcap and eth6.pcap should
+have the sme size and frames
+
+----------------------------------------------------------------
+8. Add source and sink into the EDGE_ROUTER_DOWNSTREAM.CFG, need to check with zhang, fan about which pipeline to add the SOURCE/SINK
+----------------------------------------------------------------
+[PIPELINE0]
+type = MASTER
+core = 0
+
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2 SOURCE3
+pktq_out = SWQ0 SWQ1 SWQ2 SWQ3
+encap = ethernet_qinq
+qinq_sched = test
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap /root/eth1.pcap /root/eth1.1.pcap
+pcap_bytes_rd_per_pkt = 0 64 0 64
+
+[PIPELINE2]
+type = PASS-THROUGH
+core = 2
+pktq_in = SWQ0 SWQ1 SWQ2 SWQ3
+pktq_out = SWQ4 SWQ5 SWQ6 SWQ7
+
+[PIPELINE3]
+type = PASS-THROUGH
+core = 3
+pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
+pktq_out = SINK0 SINK1 SINK2 SINK3
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap /root/eth3.1.pcap /root/eth4.1.pcap
+pcap_n_pkt_wr = 80 200 80 200
+
+[MEMPOOL0]
+pool_size = 512
+
+only use 1 or 2 ports pcap_n_pkt_wr = 80
+
+---------------------------------------
+9. Source port and sink port not paired, negative
+---------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1 SOURCE2
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+-----------------------------------------
+10. Source port and pcap file read not paired, negative
+-----------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 0 200
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+-----------------------------------------------------
+11. Source port and pcap bytes read per packet not paired, negative
+-----------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app report errors successfully and quit
+normally, then test pass
+
+--------------------------------------------
+12. Sink port and pcap file write not paired, negative
+--------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+------------------------------------------------
+13. Sink port and pcap n packet write not paired, negative
+------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcaplast modified time, if it's the same, test pass,
+otherwise, test fail
+
+-------------------------------------------------------------------
+14. Functional test for source port on flow classification pipeline (Fan will double check it)
+-------------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+-----------------------------------------------------------------
+15. Functional test for sink port on flow classification pipeline
+-----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_wr = /root/eth1.pcap /root/eth2.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+------------------------------------------------------------------------
+16. Functional test for source+sink port on flow classification pipeline(need to run with rules)
+------------------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_CLASSIFICATION
+core = s1c2
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 512
+key_offset = 192; dma_dst_offset
+key_size = 16; dma_size
+hash_offset = 208; dma_hash_offset = 80
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+17. Functional test for source port on flow action pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+18. Functional test for sink port on flow action pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+19. Functional test for source+sink port on flow action pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = FLOW_ACTIONS
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_flows = 16
+n_meters_per_flow = 1
+flow_id_offset = 286; mbuf (128) + headroom (128) + ethernet (14) + ip dst offset (16)
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet (14) = 270
+color_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+20. Functional test for source port on rt arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+21. Functional test for sink port on rt arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+22. Functional test for source+sink port on rt arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+23. Functional test for source port on rt arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+24. Functional test for sink port on rt arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+25. Functional test for source+sink port on rt arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+26. Functional test for source port on rt mpls arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+;pcap_file_wr = /home/fanzhan2/eth3.pcap /home/fanzhan2/eth2.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+27. Functional test for sink port on rt mpls arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+;pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+;pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+28. Functional test for source+sink port on rt mpls arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_mpls
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+29. Functional test for source port on rt mpls arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+30. Functional test for sink port on rt mpls arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+31. Functional test for source+sink port on rt mpls arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_mpls
+mpls_color_mark = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64
+;color_offset = 256; mbuf (128) + headroom (128) = 256
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+32. Functional test for source port on rt qinq arp off pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+;pcap_file_wr = /home/fanzhan2/eth3.pcap /home/fanzhan2/eth2.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+33. Functional test for sink port on rt qinq arp off pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+;pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+;pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+34. Functional test for source+sink port on rt qinq arp off pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_routes = 4096
+encap = ethernet_qinq
+;ip_hdr_offset = 142; headroom (128) + ethernet header (14) = 142
+ip_hdr_offset = 270; headroom (128) + ethernet header (14) = 142
+pcap_file_rd = /root/eth1.pcap /root/eth1.pcap
+pcap_bytes_rd_per_pkt = 0 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+-----------------------------------------------------------
+35. Functional test for source port on rt qinq arp on pipeline
+-----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+---------------------------------------------------------
+36. Functional test for sink port on rt qinq arp on pipeline
+---------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------------
+37. Functional test for source+sink port on rt qinq arp on pipeline
+----------------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = ROUTING
+core = s1c1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+n_arp_entries = 1024
+encap = ethernet_qinq
+qinq_sched = no
+ip_hdr_offset = 270; mbuf (128) + headroom (128) + ethernet header (14) = 270
+arp_key_offset = 192; mbuf (128) + 64 = 192
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 0 64
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 200
+command to run
+./build/ip_pipeline -f ./config/source_sink_port.cfg
+After the app finished running, eth1.pcap and eth1.1.pcap should have the same size, eth2.pcap and eth2.1.pcap should have the same size, and,
+in eth2.1.pcap, the first frame and the 101 frame should have the same frame which is the first 64 byte of 1st frame in eth2.pcap.
+
+----------------------------------------------------------
+38. Functional test for source port on passthrough pipeline for pcap_file_rd
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+The app sends the packets by reading the eth1.pcap and eth2.pcap file and drops the packets, check that the app runs successfully and quit
+normally, then test pass
+
+----------------------------------------------------------
+39. Functional test for source port on passthrough pipeline for pcap_file_rd and pcap_bytes_rd_per_pkt(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports parser errors successfully and quit, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+40. Functional test for source port on passthrough pipeline for pcap_file_rd_per_pkt(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports parser errors successfully and quit, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+41. Functional test for sink port on passthrough pipeline for pcap_file_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+42. Functional test for sink port on passthrough pipeline for pcap_file_wr and pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+43. Functional test for sink port on passthrough pipeline for pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+----------------------------------------------------------
+44. Functional test for source port on passthrough pipeline for pcap_file_rd(negative)
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+;pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app reports errors successfully and quit normally, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+45. Functional test for source port on passthrough pipeline for pcap_file_rd and pcap_bytes_rd_per_pkt
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app runs successfully and quit, then test pass, otherwise, test fail
+
+----------------------------------------------------------
+46. Functional test for source port on passthrough pipeline for pcap_file_rd_per_pkt
+----------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_rd = /root/eth1.pcap /root/eth2.pcap
+pcap_bytes_rd_per_pkt = 64 0
+Command to run
+./build/ip_pipeline -f ./config/source_port.cfg
+Check that the app runs successfully and quit, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+47. Functional test for sink port on passthrough pipeline for pcap_file_wr(negative)
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+Check the app reports parser errors successfully, then test pass, otherwise, test fail
+
+--------------------------------------------------------
+48. Functional test for sink port on passthrough pipeline for pcap_file_wr and pcap_n_pkt_wr
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+;pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+After the app finished runing, since the app send null frames from the source port, check that the pcap file size is 0, and check the
+time stamp when the app finished runing, compare with the eth1.pcap and eth2.pcap last modified time, if it's the same, test pass,
+otherwise, test fail
+
+--------------------------------------------------------
+49. Functional test for sink port on passthrough pipeline for pcap_n_pkt_wr(negative)
+--------------------------------------------------------
+config file as follows
+[PIPELINE0]
+type = MASTER
+core = 0
+[PIPELINE1]
+type = PASS-THROUGH
+core = 1
+pktq_in = SOURCE0 SOURCE1
+pktq_out = SINK0 SINK1
+;pcap_file_wr = /root/eth1.1.pcap /root/eth2.1.pcap
+pcap_n_pkt_wr = 80 0
+Command to run
+./build/ip_pipeline -f ./config/sink_port.cfg
+Check that the app reports parser errors successfully, then test pass, otherwise, test fail
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-10 8:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-29 9:40 [dts] [PATCH V3 1/2] add ip_pipeline config_file test code xu,gang
2016-08-29 9:40 ` [dts] [PATCH V3 2/2] add ip_pipeline config_file test plan xu,gang
2016-10-10 8:52 ` Xu, Qian Q
2016-09-02 1:08 ` [dts] [PATCH V3 1/2] add ip_pipeline config_file test code Xu, HuilongX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).