From: "Xu, HuilongX" <huilongx.xu@intel.com>
To: "Liu, Yong" <yong.liu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [patch V1 2/2] update shutdown_api and jumboframes check tx-packets code
Date: Thu, 12 Jan 2017 02:02:58 +0000 [thread overview]
Message-ID: <DF2A19295B96364286FEB7F3DDA27A4668D42443@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <86228AFD5BCD8E4EBFD2B90117B5E81E62D4137C@SHSMSX103.ccr.corp.intel.com>
Yes, I will send V2 patch for check tx-bytes.
Thanks a lot
> -----Original Message-----
> From: Liu, Yong
> Sent: Thursday, January 12, 2017 9:20 AM
> To: Xu, HuilongX; dts@dpdk.org
> Cc: Xu, HuilongX
> Subject: RE: [dts] [patch V1 2/2] update shutdown_api and jumboframes
> check tx-packets code
>
> Huilong,
> There're lots of function may affected if we can't avoid LLDP packets sending
> out from dpdk drive Fortville port.
> We need a list about which case will be affected by this issue. And we need
> to abstract one function to check packet size.
> Function input will be expected received or transmitted size and return value
> is just meet the expectation or not.
>
> Regards,
> Marvin
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,huilong
> > Sent: Tuesday, January 10, 2017 2:55 PM
> > To: dts@dpdk.org
> > Cc: Xu, HuilongX <huilongx.xu@intel.com>
> > Subject: [dts] [patch V1 2/2] update shutdown_api and jumboframes
> > check tx- packets code
> >
> > fotville nic will send lldp packet when port setup by dpdk testpmd.
> > so we need update check tx-packets code.
> > used (tx-packets - forward packet size) % lldp packet size replace
> > tx-packets == forward packets size
> >
> > Signed-off-by: "xu,huilong" <huilongx.xu@intel.com>
> > ---
> > tests/TestSuite_jumboframes.py | 5 ++++-
> > tests/TestSuite_shutdown_api.py |
> > 16 ++++++++++------
> > 2 files changed, 14 insertions(+), 7 deletions(-)
> >
> > diff --git a/tests/TestSuite_jumboframes.py
> > b/tests/TestSuite_jumboframes.py index 58f2e17..bebee59 100644
> > --- a/tests/TestSuite_jumboframes.py
> > +++ b/tests/TestSuite_jumboframes.py
> > @@ -39,6 +39,7 @@ import re
> > from time import sleep
> > from test_case import TestCase
> > from pmd_output import PmdOutput
> > +from settings import PROTOCOL_PACKET_SIZE
> >
> > ETHER_HEADER_LEN = 18
> > IP_HEADER_LEN = 20
> > @@ -93,7 +94,9 @@ class TestJumboframes(TestCase):
> > rx_err -= rx_err_ori
> >
> > if received:
> > - self.verify((tx_pkts == rx_pkts) and ((tx_bytes + 4) == pktsize) and
> > ((rx_bytes + 4) == pktsize),
> > + self.verify((tx_pkts - rx_pkts % PROTOCOL_PACKET_SIZE['lldp'] == 0)
> > + and ( (tx_bytes + 4 - pktsize ) %
> > + PROTOCOL_PACKET_SIZE['lldp']
> > == 0)
> > + and ((rx_bytes + 4) == pktsize),
> > "packet pass assert error")
> > else:
> > #self.verify(p0tx_pkts == p1rx_pkts and (p1rx_err == 1 or
> > p1rx_pkts == 0), diff --git a/tests/TestSuite_shutdown_api.py
> > b/tests/TestSuite_shutdown_api.py index 3dbacf2..5e67bf5 100644
> > --- a/tests/TestSuite_shutdown_api.py
> > +++ b/tests/TestSuite_shutdown_api.py
> > @@ -42,7 +42,7 @@ import re
> > import os
> > from test_case import TestCase
> > from pmd_output import PmdOutput
> > -from settings import HEADER_SIZE
> > +from settings import HEADER_SIZE, PROTOCOL_PACKET_SIZE
> > from exception import VerifyFailure
> >
> > #
> > @@ -149,14 +149,18 @@ class TestShutdownApi(TestCase):
> > if vlan is True:
> > # vlan strip default is on
> > tx_bytes_exp -= 4
> > -
> > +
> > + # fortville nic enable send lldp packet function when port setup
> > + # now the tx-packets size is lldp_size(110) * n + forward packe size
> > + # so use (tx-packets - forward packet size) % lldp_size, if
> > + it is 0, it means forward packet size right
> > +
> > if received:
> > - self.verify(p0tx_pkts == p1rx_pkts, "Wrong TX pkts p0_tx=%d,
> > p1_rx=%d" % (p0tx_pkts, p1rx_pkts))
> > + self.verify((p0tx_pkts - p1rx_pkts) %
> > + PROTOCOL_PACKET_SIZE['lldp'] == 0, "Wrong TX pkts p0_tx=%d,
> p1_rx=%d"
> > + % (p0tx_pkts, p1rx_pkts))
> > self.verify(p1rx_bytes == rx_bytes_exp, "Wrong Rx bytes
> > p1_rx=%d, expect=%d" % (p1rx_bytes, rx_bytes_exp))
> > - self.verify(p0tx_bytes == tx_bytes_exp, "Wrong Tx bytes p0_tx=%d,
> > expect=%d" % (p0tx_bytes, tx_bytes_exp))
> > + self.verify((p0tx_bytes - tx_bytes_exp) %
> > + PROTOCOL_PACKET_SIZE['lldp'] == 0, "Wrong Tx bytes p0_tx=%d,
> > + expect=%d" % (p0tx_bytes, tx_bytes_exp))
> > else:
> > - self.verify(p0tx_pkts == 0, "Packet not dropped p0tx_pkts=%d" %
> > p0tx_pkts)
> > - self.verify(p0tx_bytes == 0, "Packet not dropped p0tx_bytes=%d" %
> > p0tx_bytes)
> > + self.verify(p0tx_pkts % PROTOCOL_PACKET_SIZE['lldp'] ==
> > + 0, "Packet not
> > dropped p0tx_pkts=%d" % p0tx_pkts)
> > + self.verify(p0tx_bytes % PROTOCOL_PACKET_SIZE['lldp'] ==
> > + 0, "Packet not dropped p0tx_bytes=%d" % p0tx_bytes)
> >
> > def check_ports(self, status=True):
> > """
> > --
> > 1.9.3
prev parent reply other threads:[~2017-01-12 2:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-10 6:54 [dts] [patch V1 1/2] add dpdk send protocol packet size code xu,huilong
2017-01-10 6:54 ` [dts] [patch V1 2/2] update shutdown_api and jumboframes check tx-packets code xu,huilong
2017-01-12 1:20 ` Liu, Yong
2017-01-12 2:02 ` Xu, HuilongX [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF2A19295B96364286FEB7F3DDA27A4668D42443@SHSMSX101.ccr.corp.intel.com \
--to=huilongx.xu@intel.com \
--cc=dts@dpdk.org \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).