From: "Wang, Yinan" <yinan.wang@intel.com>
To: "Ma, LihongX" <lihongx.ma@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V2 2/2][share lib] tests: add testsuite pvp share lib
Date: Thu, 27 Jun 2019 08:25:04 +0000 [thread overview]
Message-ID: <E0CBA5A1980F1F408E1F28F9991B5B1D50EAE786@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1561592467-2690-2-git-send-email-lihongx.ma@intel.com>
Acked-by: Wang, Yinan <yinan.wang@intel.com>
> -----Original Message-----
> From: Ma, LihongX
> Sent: 2019年6月27日 7:41
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX <lihongx.ma@intel.com>
> Subject: [dts][PATCH V2 2/2][share lib] tests: add testsuite pvp share lib
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> tests/TestSuite_pvp_share_lib.py | 200
> +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 200 insertions(+)
> create mode 100644 tests/TestSuite_pvp_share_lib.py
>
> diff --git a/tests/TestSuite_pvp_share_lib.py b/tests/TestSuite_pvp_share_lib.py
> new file mode 100644
> index 0000000..d85d79d
> --- /dev/null
> +++ b/tests/TestSuite_pvp_share_lib.py
> @@ -0,0 +1,200 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +The feature need compile dpdk as shared libraries.
> +"""
> +
> +import utils
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pktgen import PacketGeneratorHelper
> +
> +
> +class TestPVPShareLib(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.core_config = "1S/4C/1T"
> + self.dut_ports = self.dut.get_ports()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores_num = len([n for n in self.dut.cores if int(n['socket']) ==
> + self.ports_socket])
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + self.verify(self.cores_num >= 4,
> + "There has not enought cores to test this suite %s" %
> + self.suite_name)
> +
> + self.core_list = self.dut.get_core_list(
> + self.core_config, socket=self.ports_socket)
> + self.core_list_virtio_user = self.core_list[0:2]
> + self.core_list_vhost_user = self.core_list[2:4]
> + self.core_mask_virtio_user =
> utils.create_mask(self.core_list_virtio_user)
> + self.core_mask_vhost_user =
> utils.create_mask(self.core_list_vhost_user)
> + self.mem_channels = self.dut.get_memory_channels()
> + self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
> + self.prepare_share_lib_env()
> + # create an instance to set stream field setting
> + self.pktgen_helper = PacketGeneratorHelper()
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + self.dut.send_expect("rm -rf ./vhost-net*", "# ")
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.vhost_user = self.dut.new_session(suite="vhost-user")
> + self.virtio_user = self.dut.new_session(suite="virtio-user")
> + self.vhost_user.send_expect("export
> LD_LIBRARY_PATH=%s/%s/lib:$LD_LIBRARY_PATH" %
> + (self.dut.base_dir, self.dut.target), "# ")
> + self.virtio_user.send_expect("export
> LD_LIBRARY_PATH=%s/%s/lib:$LD_LIBRARY_PATH" %
> + (self.dut.base_dir, self.dut.target), "# ")
> + # Prepare the result table
> + self.table_header = ['Frame']
> + self.table_header.append("Mode")
> + self.table_header.append("Mpps")
> + self.table_header.append("Queue Num")
> + self.table_header.append("% linerate")
> + self.result_table_create(self.table_header)
> +
> + def prepare_share_lib_env(self):
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_BUILD_SHARED_LIB=n$/CONFIG_RTE_BUILD_SHARED_LIB=y/'
> config/common_base", "# ")
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def restore_env(self):
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_BUILD_SHARED_LIB=y$/CONFIG_RTE_BUILD_SHARED_LIB=n/'
> config/common_base", "# ")
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def send_and_verify(self):
> + """
> + Send packet with packet generator and verify
> + """
> + payload_size = 64 - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] -
> HEADER_SIZE['tcp']
> + tgen_input = []
> + rx_port = self.tester.get_local_port(self.dut_ports[0])
> + tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.tester.scapy_append(
> + 'wrpcap("vhost.pcap", [Ether(dst="%s")/IP()/TCP()/("X"*%d)])' %
> + (self.dst_mac, payload_size))
> + tgen_input.append((tx_port, rx_port, "vhost.pcap"))
> +
> + self.tester.scapy_execute()
> + self.tester.pktgen.clear_streams()
> + streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100,
> + None, self.tester.pktgen)
> + _, Pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
> + self.verify(Pps > 0, "%s can not receive packets" % (self.running_case))
> + Pps /= 1E6
> + Pct = (Pps * 100) / \
> + self.wirespeed(self.nic, 64, 1)
> +
> + results_row = [64]
> + results_row.append("share_lib")
> + results_row.append(Pps)
> + results_row.append("1")
> + results_row.append(Pct)
> + self.result_table_add(results_row)
> +
> + def start_testpmd_as_vhost(self, driver):
> + """
> + start testpmd on vhost
> + """
> + command_line_client = "%s/app/testpmd -c %s -n %d " + \
> + "--socket-mem 2048,2048 --legacy-mem " + \
> + "-d librte_pmd_vhost.so -d
> librte_pmd_%s.so " + \
> + "-d librte_mempool_ring.so
> --file-prefix=vhost " + \
> + "--vdev
> 'net_vhost0,iface=vhost-net,queues=1' -- -i"
> + command_line_client = command_line_client % (self.target,
> + self.core_mask_vhost_user, self.mem_channels,
> driver)
> + self.vhost_user.send_expect(command_line_client, "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + def start_testpmd_as_virtio(self):
> + """
> + start testpmd on virtio
> + """
> + command_line_user = "./%s/app/testpmd -n %d -c %s " + \
> + "--no-pci --socket-mem 2048,2048
> --legacy-mem " + \
> + "--file-prefix=virtio-user " + \
> + "-d librte_pmd_virtio.so -d
> librte_mempool_ring.so " + \
> +
> "--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i"
> + command_line_user = command_line_user % (self.target,
> + self.mem_channels, self.core_mask_virtio_user)
> + self.virtio_user.send_expect(command_line_user, "testpmd> ", 120)
> + self.virtio_user.send_expect("start", "testpmd> ", 120)
> +
> + def close_all_apps(self):
> + """
> + close testpmd and vhost-switch
> + """
> + self.virtio_user.send_expect("quit", "# ", 60)
> + self.vhost_user.send_expect("quit", "# ", 60)
> + self.dut.close_session(self.vhost_user)
> + self.dut.close_session(self.virtio_user)
> +
> + def test_perf_pvp_share_lib_of_niantic(self):
> + """
> + Vhost/virtio-user pvp share lib test with niantic
> + """
> + self.verify(self.nic in ['niantic'],
> + "the nic not support this case: %s" % self.running_case)
> + self.start_testpmd_as_vhost(driver='ixgbe')
> + self.start_testpmd_as_virtio()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def test_perf_pvp_share_lib_of_fortville(self):
> + """
> + Vhost/virtio-user pvp share lib test with fortville
> + """
> + self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
> "fortville_25g"],
> + "the nic not support this case: %s" % self.running_case)
> + self.start_testpmd_as_vhost(driver='i40e')
> + self.start_testpmd_as_virtio()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.restore_env()
> --
> 2.7.4
next prev parent reply other threads:[~2019-06-27 8:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 23:41 [dts] [PATCH V2 1/2][share lib] conf/supportlist: add checklist for " lihong
2019-06-26 23:41 ` [dts] [PATCH V2 2/2][share lib] tests: add testsuite " lihong
2019-06-27 8:25 ` Wang, Yinan [this message]
2019-07-02 7:31 ` Ma, LihongX
2019-07-10 6:20 ` Tu, Lijuan
2019-06-27 8:24 ` [dts] [PATCH V2 1/2][share lib] conf/supportlist: add checklist for " Wang, Yinan
2019-07-02 7:29 ` Ma, LihongX
2019-07-10 6:20 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E0CBA5A1980F1F408E1F28F9991B5B1D50EAE786@SHSMSX104.ccr.corp.intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
--cc=lihongx.ma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).