From: "Zhang, XiX" <xix.zhang@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V1] conf/test_case_supportlist:multicast_filter only support igb ixgbe, i40e feature corresponding task ticket is DPDK-7884.
Date: Mon, 27 Jul 2020 09:37:31 +0000 [thread overview]
Message-ID: <E22AF82976AEF646B9B29E4604B9BED504CC2406@CDSMSX102.ccr.corp.intel.com> (raw)
In-Reply-To: <1595842582-6622-1-git-send-email-xix.zhang@intel.com>
[-- Attachment #1: Type: text/plain, Size: 1634 bytes --]
Tested-by: Zhang, XiX <xix.zhang@intel.com>
-----Original Message-----
From: Zhang, XiX
Sent: Monday, July 27, 2020 5:36 PM
To: dts@dpdk.org
Cc: Zhang, XiX <xix.zhang@intel.com>
Subject: [dts][PATCH V1] conf/test_case_supportlist:multicast_filter only support igb ixgbe,i40e feature corresponding task ticket is DPDK-7884.
mac_filter/test_multicast_filter:igbe/ixgbe/mlx5/i40e_vf all support this op, i40e feature corresponding task ticket is DPDK-7884.
Signed-off-by: xizhan4x <xix.zhang@intel.com>
---
conf/test_case_supportlist.json | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/conf/test_case_supportlist.json b/conf/test_case_supportlist.json index a720a7f..85da736 100644
--- a/conf/test_case_supportlist.json
+++ b/conf/test_case_supportlist.json
@@ -2224,5 +2224,29 @@
"Bug ID": "",
"Comments": "This case only support ixgbe and igb nic "
}
+ ],
+ "multicast_filter": [
+ {
+ "OS": [
+ "ALL"
+ ],
+ "NIC": [
+ "niantic",
+ "ironpond",
+ "twinpond",
+ "twinville",
+ "sageville",
+ "sagepond",
+ "springville",
+ "powerville",
+ "foxville"
+ ],
+ "Target": [
+ "ALL"
+ ],
+ "Bug ID": "",
+ "Comments": "This case only support ixgbe and igb nic,The feature corresponding task ticket is DPDK-7884."
+ }
]
+
}
--
1.8.3.1
[-- Attachment #2: TestMacFilter.log --]
[-- Type: application/octet-stream, Size: 5020 bytes --]
27/07/2020 17:32:39 dts:
TEST SUITE : TestMacFilter
27/07/2020 17:32:39 dts: NIC : fortpark_TLV
27/07/2020 17:32:39 dut.10.240.183.162:
27/07/2020 17:32:40 tester:
27/07/2020 17:32:40 dut.10.240.183.162: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:b1:00.0 -w 0000:b1:00.1 --file-prefix=dpdk_29265_20200727173221 -- -i --portmask=0x1
27/07/2020 17:32:41 dut.10.240.183.162: EAL: Detected 112 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_29265_20200727173221/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_i40e (8086:37d0) device: 0000:b1:00.0 (socket 1)
EAL: Probe PCI driver: net_i40e (8086:37d0) device: 0000:b1:00.1 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 2 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 1)
Port 0: F8:F2:1E:51:DB:B6
Configuring Port 1 (socket 1)
Port 1: F8:F2:1E:51:DB:B7
Checking link statuses...
Done
27/07/2020 17:32:51 dut.10.240.183.162: set verbose 1
27/07/2020 17:32:52 dut.10.240.183.162: set verbose 1
Change verbose level from 0 to 1
27/07/2020 17:32:52 dut.10.240.183.162: set fwd rxonly
27/07/2020 17:32:52 dut.10.240.183.162: set fwd rxonly
Set rxonly packet forwarding mode
27/07/2020 17:32:52 dut.10.240.183.162: start
27/07/2020 17:32:52 dut.10.240.183.162: start
rxonly packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
27/07/2020 17:32:52 dut.10.240.183.162: show port info 0
27/07/2020 17:32:52 dut.10.240.183.162: show port info 0
********************* Infos for port 0 *********************
MAC address: F8:F2:1E:51:DB:B6
Device name: 0000:b1:00.0
Driver name: net_i40e
Firmware-version: 4.11 0x80001def 1.1999.0
Devargs:
Connect to socket: 1
memory allocation on the socket: 1
Link status: up
Link speed: 10000 Mbps
Link duplex: full-duplex
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 64
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 52
Redirection table size: 512
Supported RSS offload flow types:
ipv4-frag
ipv4-tcp
ipv4-udp
ipv4-sctp
ipv4-other
ipv6-frag
ipv6-tcp
ipv6-udp
ipv6-sctp
ipv6-other
l2_payload
Minimum size of RX buffer: 1024
Maximum configurable length of RX packet: 9728
Maximum configurable size of LRO aggregated packet: 0
Maximum number of VMDq pools: 64
Current number of RX queues: 1
Max possible RX queues: 320
Max possible number of RXDs per queue: 4096
Min possible number of RXDs per queue: 64
RXDs number alignment: 32
Current number of TX queues: 1
Max possible TX queues: 320
Max possible number of TXDs per queue: 4096
Min possible number of TXDs per queue: 64
TXDs number alignment: 32
Max segment number per packet: 255
Max segment number per MTU/TSO: 8
27/07/2020 17:32:52 TestMacFilter: Test Case test_multicast_filter Result SKIPPED:
27/07/2020 17:32:52 dts:
TEST SUITE ENDED: TestMacFilter
next prev parent reply other threads:[~2020-07-27 9:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 9:36 xizhan4x
2020-07-27 9:37 ` Zhang, XiX [this message]
2020-08-12 5:42 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E22AF82976AEF646B9B29E4604B9BED504CC2406@CDSMSX102.ccr.corp.intel.com \
--to=xix.zhang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).