From: "Zhang, XiX" <xix.zhang@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V1] tests/TestSuite_mac_filter:Fixed multicast_filter failure of a due to the previous case stop test_pmd
Date: Wed, 29 Jul 2020 07:35:19 +0000 [thread overview]
Message-ID: <E22AF82976AEF646B9B29E4604B9BED504CC285B@CDSMSX102.ccr.corp.intel.com> (raw)
In-Reply-To: <1596008096-3377-1-git-send-email-xix.zhang@intel.com>
[-- Attachment #1: Type: text/plain, Size: 2763 bytes --]
Tested-by: Zhang, XiX <xix.zhang@intel.com>
-----Original Message-----
From: Zhang, XiX
Sent: Wednesday, July 29, 2020 3:35 PM
To: dts@dpdk.org
Cc: Zhang, XiX <xix.zhang@intel.com>
Subject: [dts][PATCH V1] tests/TestSuite_mac_filter:Fixed multicast_filter failure of a due to the previous case stop test_pmd
Fixed multicast_filter failure of a due to the previous case stop test_pmd
Signed-off-by: xizhan4x <xix.zhang@intel.com>
---
tests/TestSuite_mac_filter.py | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/tests/TestSuite_mac_filter.py b/tests/TestSuite_mac_filter.py index b762c91..e491711 100644
--- a/tests/TestSuite_mac_filter.py
+++ b/tests/TestSuite_mac_filter.py
@@ -55,8 +55,14 @@ class TestMacFilter(TestCase):
self.dutPorts = self.dut.get_ports()
# Verify that enough ports are available
self.verify(len(self.dutPorts) >= 1, "Insufficient ports")
- portMask = utils.create_mask(self.dutPorts[:1])
+
+ def set_up(self):
+ """
+ Run before each test case.
+ Nothing to do.
+ """
+ portMask = utils.create_mask(self.dutPorts[:1])
self.pmdout = PmdOutput(self.dut)
self.pmdout.start_testpmd("Default", "--portmask=%s" % portMask)
self.dut.send_expect("set verbose 1", "testpmd> ") @@ -75,12 +81,6 @@ class TestMacFilter(TestCase):
self.max_mac_addr = utils.regexp(out, "Maximum number of MAC addresses: ([0-9]+)")
- def set_up(self):
- """
- Run before each test case.
- Nothing to do.
- """
- pass
def whitelist_send_packet(self, portid, destMac="00:11:22:33:44:55", count=-1):
"""
@@ -144,6 +144,7 @@ class TestMacFilter(TestCase):
self.verify("received" not in out,
"Packet has been received on a new MAC address that has been removed from the port")
self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
def test_invalid_addresses(self):
"""
@@ -179,6 +180,8 @@ class TestMacFilter(TestCase):
i = i + 1
self.verify("No space left on device" in out, "added 1 address more than max MAC addresses")
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
def test_multicast_filter(self):
"""
@@ -206,6 +209,7 @@ class TestMacFilter(TestCase):
"Packet has been received when it should have ignored the broadcast")
self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
def tear_down(self):
"""
--
1.8.3.1
[-- Attachment #2: TestMacFilter.log --]
[-- Type: application/octet-stream, Size: 39337 bytes --]
29/07/2020 15:24:11 dts:
TEST SUITE : TestMacFilter
29/07/2020 15:24:11 dts: NIC : powerville
29/07/2020 15:24:12 dut.10.240.183.171:
29/07/2020 15:24:12 tester:
29/07/2020 15:24:12 TestMacFilter: Test Case test_add_remove_mac_address Begin
29/07/2020 15:24:12 dut.10.240.183.171:
29/07/2020 15:24:12 tester:
29/07/2020 15:24:12 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:83:00.0 -w 0000:83:00.1 -w 0000:83:00.2 -w 0000:83:00.3 --file-prefix=dpdk_27770_20200729152348 -- -i --portmask=0x1
29/07/2020 15:24:14 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_27770_20200729152348/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.0 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.1 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.2 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.3 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 4 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 1)
Port 0: B4:96:91:49:98:CC
Configuring Port 1 (socket 1)
Port 1: B4:96:91:49:98:CD
Configuring Port 2 (socket 1)
Port 2: B4:96:91:49:98:CE
Configuring Port 3 (socket 1)
Port 3: B4:96:91:49:98:CF
Checking link statuses...
Done
29/07/2020 15:24:24 dut.10.240.183.171: set verbose 1
29/07/2020 15:24:24 dut.10.240.183.171: set verbose 1
Change verbose level from 0 to 1
29/07/2020 15:24:24 dut.10.240.183.171: set fwd rxonly
29/07/2020 15:24:25 dut.10.240.183.171: set fwd rxonly
Set rxonly packet forwarding mode
29/07/2020 15:24:25 dut.10.240.183.171: start
29/07/2020 15:24:25 dut.10.240.183.171: start
rxonly packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 3: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
29/07/2020 15:24:25 dut.10.240.183.171: show port info 0
29/07/2020 15:24:25 dut.10.240.183.171: show port info 0
********************* Infos for port 0 *********************
MAC address: B4:96:91:49:98:CC
Device name: 0000:83:00.0
Driver name: net_e1000_igb
Firmware-version: 1.63, 0x80001001
Devargs:
Connect to socket: 1
memory allocation on the socket: 1
Link status: up
Link speed: 1000 Mbps
Link duplex: full-duplex
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 32
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 40
Redirection table size: 128
Supported RSS offload flow types:
ipv4
ipv4-tcp
ipv4-udp
ipv6
ipv6-tcp
ipv6-udp
user defined 15
user defined 16
user defined 17
Minimum size of RX buffer: 256
Maximum configurable length of RX packet: 16383
Maximum configurable size of LRO aggregated packet: 0
Maximum number of VMDq pools: 8
Current number of RX queues: 1
Max possible RX queues: 8
Max possible number of RXDs per queue: 4096
Min possible number of RXDs per queue: 32
RXDs number alignment: 8
Current number of TX queues: 1
Max possible TX queues: 8
Max possible number of TXDs per queue: 4096
Min possible number of TXDs per queue: 32
TXDs number alignment: 8
Max segment number per packet: 255
Max segment number per MTU/TSO: 255
29/07/2020 15:24:25 dut.10.240.183.171: set promisc 0 off
29/07/2020 15:24:25 dut.10.240.183.171: set promisc 0 off
29/07/2020 15:24:25 dut.10.240.183.171: clear port stats all
29/07/2020 15:24:25 dut.10.240.183.171: clear port stats all
NIC statistics for port 0 cleared
NIC statistics for port 1 cleared
NIC statistics for port 2 cleared
NIC statistics for port 3 cleared
29/07/2020 15:24:25 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007465.3241758 root@10.240.183.53:/tmp/tester/
29/07/2020 15:24:26 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007465.3241758 root@10.240.183.53:/tmp/tester/
29/07/2020 15:24:28 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007465.3241758
29/07/2020 15:24:30 tester: packet ready for sending...
Ether(dst='b4:96:91:49:98:cc', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:24:45 dut.10.240.183.171: port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=B4:96:91:49:98:CC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=B4:96:91:49:98:CC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=B4:96:91:49:98:CC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=B4:96:91:49:98:CC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
29/07/2020 15:24:45 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007485.0505323 root@10.240.183.53:/tmp/tester/
29/07/2020 15:24:46 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007485.0505323 root@10.240.183.53:/tmp/tester/
29/07/2020 15:24:48 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007485.0505323
29/07/2020 15:24:49 tester: packet ready for sending...
Ether(dst='00:01:01:00:00:00', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:25:04 dut.10.240.183.171:
29/07/2020 15:25:04 dut.10.240.183.171: mac_addr add 0 00:01:01:00:00:00
29/07/2020 15:25:04 dut.10.240.183.171: mac_addr add 0 00:01:01:00:00:00
29/07/2020 15:25:04 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007504.8709524 root@10.240.183.53:/tmp/tester/
29/07/2020 15:25:06 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007504.8709524 root@10.240.183.53:/tmp/tester/
29/07/2020 15:25:08 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007504.8709524
29/07/2020 15:25:09 tester: packet ready for sending...
Ether(dst='00:01:01:00:00:00', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:25:24 dut.10.240.183.171: port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=00:01:01:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=00:01:01:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=00:01:01:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=00:01:01:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
29/07/2020 15:25:24 dut.10.240.183.171: mac_addr remove 0 00:01:01:00:00:00
29/07/2020 15:25:24 dut.10.240.183.171: mac_addr remove 0 00:01:01:00:00:00
29/07/2020 15:25:24 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007524.6527193 root@10.240.183.53:/tmp/tester/
29/07/2020 15:25:26 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007524.6527193 root@10.240.183.53:/tmp/tester/
29/07/2020 15:25:27 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007524.6527193
29/07/2020 15:25:29 tester: packet ready for sending...
Ether(dst='00:01:01:00:00:00', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:25:44 dut.10.240.183.171:
29/07/2020 15:25:44 dut.10.240.183.171: stop
29/07/2020 15:25:44 dut.10.240.183.171: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 8 RX-dropped: 0 RX-total: 8
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 8 RX-dropped: 0 RX-total: 8
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
29/07/2020 15:25:44 dut.10.240.183.171: quit
29/07/2020 15:25:46 dut.10.240.183.171: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Stopping port 3...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Shutting down port 3...
Closing ports...
Done
Bye...
29/07/2020 15:25:46 TestMacFilter: Test Case test_add_remove_mac_address Result PASSED:
29/07/2020 15:25:46 TestMacFilter: Test Case test_invalid_addresses Begin
29/07/2020 15:25:46 dut.10.240.183.171:
29/07/2020 15:25:46 tester:
29/07/2020 15:25:46 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:83:00.0 -w 0000:83:00.1 -w 0000:83:00.2 -w 0000:83:00.3 --file-prefix=dpdk_27770_20200729152348 -- -i --portmask=0x1
29/07/2020 15:25:49 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_27770_20200729152348/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.0 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.1 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.2 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.3 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 4 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 1)
Port 0: B4:96:91:49:98:CC
Configuring Port 1 (socket 1)
Port 1: B4:96:91:49:98:CD
Configuring Port 2 (socket 1)
Port 2: B4:96:91:49:98:CE
Configuring Port 3 (socket 1)
Port 3: B4:96:91:49:98:CF
Checking link statuses...
Done
29/07/2020 15:25:59 dut.10.240.183.171: set verbose 1
29/07/2020 15:25:59 dut.10.240.183.171: set verbose 1
Change verbose level from 0 to 1
29/07/2020 15:25:59 dut.10.240.183.171: set fwd rxonly
29/07/2020 15:25:59 dut.10.240.183.171: set fwd rxonly
Set rxonly packet forwarding mode
29/07/2020 15:25:59 dut.10.240.183.171: start
29/07/2020 15:25:59 dut.10.240.183.171: start
rxonly packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 3: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
29/07/2020 15:25:59 dut.10.240.183.171: show port info 0
29/07/2020 15:25:59 dut.10.240.183.171: show port info 0
********************* Infos for port 0 *********************
MAC address: B4:96:91:49:98:CC
Device name: 0000:83:00.0
Driver name: net_e1000_igb
Firmware-version: 1.63, 0x80001001
Devargs:
Connect to socket: 1
memory allocation on the socket: 1
Link status: up
Link speed: 1000 Mbps
Link duplex: full-duplex
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 32
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 40
Redirection table size: 128
Supported RSS offload flow types:
ipv4
ipv4-tcp
ipv4-udp
ipv6
ipv6-tcp
ipv6-udp
user defined 15
user defined 16
user defined 17
Minimum size of RX buffer: 256
Maximum configurable length of RX packet: 16383
Maximum configurable size of LRO aggregated packet: 0
Maximum number of VMDq pools: 8
Current number of RX queues: 1
Max possible RX queues: 8
Max possible number of RXDs per queue: 4096
Min possible number of RXDs per queue: 32
RXDs number alignment: 8
Current number of TX queues: 1
Max possible TX queues: 8
Max possible number of TXDs per queue: 4096
Min possible number of TXDs per queue: 32
TXDs number alignment: 8
Max segment number per packet: 255
Max segment number per MTU/TSO: 255
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:00
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:00
Port 0: Cannot add NULL MAC address
mac_addr_cmd error: (Invalid argument)
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr remove 0 b4:96:91:49:98:cc
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr remove 0 b4:96:91:49:98:cc
Port 0: Cannot remove default MAC address
mac_addr_cmd error: (Address already in use)
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:01
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:01
29/07/2020 15:25:59 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:01
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:00:00:00:00:01
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:00
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:00
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:01
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:01
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:02
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:02
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:03
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:03
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:04
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:04
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:05
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:05
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:06
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:06
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:07
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:07
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:08
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:08
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:09
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:09
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0A
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0A
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0B
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0B
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0C
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0C
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0D
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0D
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0E
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0E
29/07/2020 15:26:00 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0F
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:0F
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:10
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:10
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:11
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:11
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:12
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:12
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:13
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:13
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:14
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:14
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:15
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:15
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:16
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:16
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:17
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:17
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:18
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:18
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:19
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:19
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1A
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1A
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1B
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1B
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1C
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1C
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1D
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1D
29/07/2020 15:26:01 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1E
29/07/2020 15:26:02 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1E
Port 0: MAC address array full
mac_addr_cmd error: (No space left on device)
29/07/2020 15:26:02 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1F
29/07/2020 15:26:02 dut.10.240.183.171: mac_addr add 0 00:01:00:00:00:1F
Port 0: MAC address array full
mac_addr_cmd error: (No space left on device)
29/07/2020 15:26:02 dut.10.240.183.171: stop
29/07/2020 15:26:02 dut.10.240.183.171: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
29/07/2020 15:26:02 dut.10.240.183.171: quit
29/07/2020 15:26:04 dut.10.240.183.171: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Stopping port 3...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Shutting down port 3...
Closing ports...
Done
Bye...
29/07/2020 15:26:04 TestMacFilter: Test Case test_invalid_addresses Result PASSED:
29/07/2020 15:26:04 TestMacFilter: Test Case test_multicast_filter Begin
29/07/2020 15:26:04 dut.10.240.183.171:
29/07/2020 15:26:04 tester:
29/07/2020 15:26:04 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/testpmd -l 1,2 -n 4 -w 0000:83:00.0 -w 0000:83:00.1 -w 0000:83:00.2 -w 0000:83:00.3 --file-prefix=dpdk_27770_20200729152348 -- -i --portmask=0x1
29/07/2020 15:26:07 dut.10.240.183.171: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/dpdk_27770_20200729152348/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: using IOMMU type 1 (Type 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.0 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.1 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.2 (socket 1)
EAL: Probe PCI driver: net_e1000_igb (8086:1521) device: 0000:83:00.3 (socket 1)
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
previous number of forwarding ports 4 - changed to number of configured ports 1
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.
Configuring Port 0 (socket 1)
Port 0: B4:96:91:49:98:CC
Configuring Port 1 (socket 1)
Port 1: B4:96:91:49:98:CD
Configuring Port 2 (socket 1)
Port 2: B4:96:91:49:98:CE
Configuring Port 3 (socket 1)
Port 3: B4:96:91:49:98:CF
Checking link statuses...
Done
29/07/2020 15:26:17 dut.10.240.183.171: set verbose 1
29/07/2020 15:26:17 dut.10.240.183.171: set verbose 1
Change verbose level from 0 to 1
29/07/2020 15:26:17 dut.10.240.183.171: set fwd rxonly
29/07/2020 15:26:17 dut.10.240.183.171: set fwd rxonly
Set rxonly packet forwarding mode
29/07/2020 15:26:17 dut.10.240.183.171: start
29/07/2020 15:26:17 dut.10.240.183.171: start
rxonly packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
port 3: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=512 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=4
RX Offloads=0x0
TX queue: 0
TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=8 hthresh=1 wthresh=16
TX offloads=0x0 - TX RS bit threshold=0
29/07/2020 15:26:17 dut.10.240.183.171: show port info 0
29/07/2020 15:26:17 dut.10.240.183.171: show port info 0
********************* Infos for port 0 *********************
MAC address: B4:96:91:49:98:CC
Device name: 0000:83:00.0
Driver name: net_e1000_igb
Firmware-version: 1.63, 0x80001001
Devargs:
Connect to socket: 1
memory allocation on the socket: 1
Link status: up
Link speed: 1000 Mbps
Link duplex: full-duplex
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 32
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
Hash key size in bytes: 40
Redirection table size: 128
Supported RSS offload flow types:
ipv4
ipv4-tcp
ipv4-udp
ipv6
ipv6-tcp
ipv6-udp
user defined 15
user defined 16
user defined 17
Minimum size of RX buffer: 256
Maximum configurable length of RX packet: 16383
Maximum configurable size of LRO aggregated packet: 0
Maximum number of VMDq pools: 8
Current number of RX queues: 1
Max possible RX queues: 8
Max possible number of RXDs per queue: 4096
Min possible number of RXDs per queue: 32
RXDs number alignment: 8
Current number of TX queues: 1
Max possible TX queues: 8
Max possible number of TXDs per queue: 4096
Min possible number of TXDs per queue: 32
TXDs number alignment: 8
Max segment number per packet: 255
Max segment number per MTU/TSO: 255
29/07/2020 15:26:17 dut.10.240.183.171: set promisc 0 off
29/07/2020 15:26:17 dut.10.240.183.171: set promisc 0 off
29/07/2020 15:26:17 dut.10.240.183.171: clear port stats all
29/07/2020 15:26:17 dut.10.240.183.171: clear port stats all
NIC statistics for port 0 cleared
NIC statistics for port 1 cleared
NIC statistics for port 2 cleared
NIC statistics for port 3 cleared
29/07/2020 15:26:17 dut.10.240.183.171: mcast_addr add 0 01:00:5E:00:00:00
29/07/2020 15:26:17 dut.10.240.183.171: mcast_addr add 0 01:00:5E:00:00:00
29/07/2020 15:26:17 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007577.7379768 root@10.240.183.53:/tmp/tester/
29/07/2020 15:26:19 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007577.7379768 root@10.240.183.53:/tmp/tester/
29/07/2020 15:26:21 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007577.7379768
29/07/2020 15:26:22 tester: packet ready for sending...
Ether(dst='01:00:5e:00:00:00', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:26:38 dut.10.240.183.171: port 0/queue 0: received 1 packets
src=52:00:00:00:00:00 - dst=01:00:5E:00:00:00 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
29/07/2020 15:26:38 dut.10.240.183.171: mcast_addr remove 0 01:00:5E:00:00:00
29/07/2020 15:26:38 dut.10.240.183.171: mcast_addr remove 0 01:00:5E:00:00:00
29/07/2020 15:26:38 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.pcap1596007598.4768715 root@10.240.183.53:/tmp/tester/
29/07/2020 15:26:40 tester: scp -v /home/autoregression/zx_7_29/output/tmp/pcap/scapy_ens2f0.cmd1596007598.4768715 root@10.240.183.53:/tmp/tester/
29/07/2020 15:26:41 tester: python3 /tmp/tester/scapy_ens2f0.cmd1596007598.4768715
29/07/2020 15:26:43 tester: packet ready for sending...
Ether(dst='01:00:5e:00:00:00', src='52:00:00:00:00:00', type=2048)/IP(version=4, ihl=5, tos=0, len=46, id=1, flags=0, frag=0, ttl=64, proto=17, chksum=31932, src='127.0.0.1', dst='127.0.0.1')/UDP(sport=53, dport=53, len=26, chksum=58930)/DNS(length=None, id=22616, qr=0, opcode=11, aa=0, tc=0, rd=0, ra=0, z=1, ad=0, cd=1, rcode=8, qdcount=22616, ancount=22616, nscount=22616, arcount=22616, qd=b'', an=b'', ns=b'', ar=b'')/Raw(load=b'XXXXXX')
29/07/2020 15:26:59 dut.10.240.183.171:
29/07/2020 15:26:59 dut.10.240.183.171: stop
29/07/2020 15:26:59 dut.10.240.183.171: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
29/07/2020 15:26:59 dut.10.240.183.171: quit
29/07/2020 15:27:01 dut.10.240.183.171: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Stopping port 3...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Shutting down port 3...
Closing ports...
Done
Bye...
29/07/2020 15:27:01 TestMacFilter: Test Case test_multicast_filter Result PASSED:
29/07/2020 15:27:01 dts:
TEST SUITE ENDED: TestMacFilter
next prev parent reply other threads:[~2020-07-29 7:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-29 7:34 xizhan4x
2020-07-29 7:35 ` Zhang, XiX [this message]
2020-08-12 5:44 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E22AF82976AEF646B9B29E4604B9BED504CC285B@CDSMSX102.ccr.corp.intel.com \
--to=xix.zhang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).