Re: [dts] [PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan: remove old testplan

["Xiao, QimaiX" <qimaix.xiao@intel.com>]

Tested-by: Xiao Qimai <qimaix.xiao@intel.com>

Regards,
Xiao Qimai

> -----Original Message-----
> From: Xiao, QimaiX <qimaix.xiao@intel.com>
> Sent: Thursday, August 27, 2020 5:41 PM
> To: dts@dpdk.org
> Cc: Xiao, QimaiX <qimaix.xiao@intel.com>
> Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> remove old testplan
> 
> *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> test_plans/vhost_user_interrupt_test_plan.rst
> 
> Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
> ---
>  .../vhost_enqueue_interrupt_test_plan.rst     | 145 ------------------
>  1 file changed, 145 deletions(-)
>  delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
> 
> diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> b/test_plans/vhost_enqueue_interrupt_test_plan.rst
> deleted file mode 100644
> index ee9b7a5d..00000000
> --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> +++ /dev/null
> @@ -1,145 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> -   All rights reserved.
> -
> -   Redistribution and use in source and binary forms, with or without
> -   modification, are permitted provided that the following conditions
> -   are met:
> -
> -   - Redistributions of source code must retain the above copyright
> -     notice, this list of conditions and the following disclaimer.
> -
> -   - Redistributions in binary form must reproduce the above copyright
> -     notice, this list of conditions and the following disclaimer in
> -     the documentation and/or other materials provided with the
> -     distribution.
> -
> -   - Neither the name of Intel Corporation nor the names of its
> -     contributors may be used to endorse or promote products derived
> -     from this software without specific prior written permission.
> -
> -   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> -   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> -   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> -   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> -   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> -   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> -   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> -   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> -   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> -   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> -   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> -   OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -======================================
> -vhost enqueue interrupt mode test plan
> -======================================
> -
> -Description
> -===========
> -
> -Vhost enqueue interrupt need test with l3fwd-power sample, small packets
> send from virtio-user to vhost side，
> -check vhost-user cores can be wakeup，and vhost-user cores should be
> back to sleep after stop sending packets -from virtio side.
> -
> -Prerequisites
> -=============
> -
> -Modify l3fwd-power example code and recompile::
> -
> -        --- a/examples/l3fwd-power/main.c
> -        +++ b/examples/l3fwd-power/main.c
> -        @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
> -                .mq_mode        = ETH_MQ_RX_RSS,
> -                .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> -                .split_hdr_size = 0,
> -        -       .offloads = DEV_RX_OFFLOAD_CHECKSUM,
> -        },
> -        .rx_adv_conf = {
> -                .rss_conf = {
> -
> -Test flow
> -=========
> -
> -Virtio-user --> Vhost-user
> -
> -Test Case1: Wake up split ring vhost-user core with l3fwd-power sample -
> ==========================================================
> ============
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample
> when multi queues are enabled -
> ==========================================================
> ===========================================
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> -
> -Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample -
> ==========================================================
> =============
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1,packed_vq=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case4:  Wake up packed ring vhost-user cores with l3fwd-power
> sample when multi queues are enabled -
> ==========================================================
> =============================================
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> --
> 2.25.1