From: "Fu, Qi" <qi.fu@intel.com>
To: "Zhang, XiX" <xix.zhang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhang, XiX" <xix.zhang@intel.com>
Subject: Re: [dts] [PATCH V1] tests/TestSuite_shutdown_apitests:change dpdk pf create vf to kernel pf create vf
Date: Thu, 4 Jun 2020 09:25:20 +0000 [thread overview]
Message-ID: <MWHPR11MB13920B9FC56CBBD3B8E39150EA890@MWHPR11MB1392.namprd11.prod.outlook.com> (raw)
In-Reply-To: <1590570365-110634-1-git-send-email-xix.zhang@intel.com>
Acked-by: Fu, Qi<qi.fu@intel.com>
Best regards,
Fu, Qi
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of xizhan4x
> Sent: Wednesday, May 27, 2020 5:06 PM
> To: dts@dpdk.org
> Cc: Zhang, XiX <xix.zhang@intel.com>
> Subject: [dts] [PATCH V1] tests/TestSuite_shutdown_apitests:change dpdk pf
> create vf to kernel pf create vf
>
> change dpdk pf create vf to kernel pf create vf and used ethtool Modify speed
>
>
> Signed-off-by: xizhan4x <xix.zhang@intel.com>
> ---
> tests/TestSuite_shutdown_api.py | 129 ++++++++++++++++----------------
> 1 file changed, 66 insertions(+), 63 deletions(-)
>
> diff --git a/tests/TestSuite_shutdown_api.py b/tests/TestSuite_shutdown_api.py
> index 3a29b9c..650ccfc 100644
> --- a/tests/TestSuite_shutdown_api.py
> +++ b/tests/TestSuite_shutdown_api.py
> @@ -48,7 +48,7 @@ from exception import VerifyFailure from qemu_kvm
> import QEMUKvm from settings import get_nic_name from random import
> randint
> -
> +from settings import DRIVERS
> #
> #
> # Test class.
> @@ -80,6 +80,18 @@ class TestShutdownApi(TestCase):
> self.pmdout = PmdOutput(self.dut)
> self.vm_env_done = False
>
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + if self._suite_result.test_case == "test_change_linkspeed_vf":
> + self.used_driver = self.dut.ports_info[0]["port"].get_nic_driver()
> + driver_name = DRIVERS.get(self.nic)
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
> + self.bind_nic_driver(self.dut_ports, driver=driver_name)
> + self.setup_vm_env(driver_name)
> +
> def get_stats(self, portid):
> """
> Get packets number from port statistic.
> @@ -188,11 +200,6 @@ class TestShutdownApi(TestCase):
> else:
> self.verify("Link detected: no" in out, "Wrong link status")
>
> - def set_up(self):
> - """
> - Run before each test case.
> - """
> - pass
>
> def check_linkspeed_config(self, configs):
> ret_val = False
> @@ -211,14 +218,12 @@ class TestShutdownApi(TestCase):
> return ret_val
>
> def check_vf_link_status(self):
> - self.dut_testpmd.start_testpmd("Default", "--port-topology=chained")
> self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--port-
> topology=chained')
> - for i in range(10):
> + time.sleep(2)
> + for i in range(15):
> out = self.vm0_testpmd.execute_cmd('show port info 0')
> print(out)
> if 'Link status: down' in out:
> - self.dut_testpmd.execute_cmd('port stop all')
> - self.dut_testpmd.execute_cmd('port start all')
> time.sleep(2)
> else :
> break
> @@ -239,7 +244,6 @@ class TestShutdownApi(TestCase):
> driver = netdev.default_driver
> if driver != driver_now:
> netdev.bind_driver(driver=driver)
> -
> def setup_vm_env(self, driver='default'):
> """
> Create testing environment with 1VF generated from 1PF @@ -247,9
> +251,6 @@ class TestShutdownApi(TestCase):
> if self.vm_env_done:
> return
>
> - # initialize vm
> - self.dut_ports = self.dut.get_ports(self.nic)
> - self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
> self.vm0 = None
>
> # set vf assign method and vf driver @@ -263,12 +264,9 @@ class
> TestShutdownApi(TestCase):
> self.vf_assign_method = 'vfio-pci'
> self.dut.send_expect('modprobe vfio-pci', '#')
>
> - self.dut.setup_modules_linux(self.target, 'igb_uio', '')
> - self.bind_nic_driver(self.dut_ports[:1], driver="igb_uio")
> self.used_dut_port = self.dut_ports[0]
> tester_port = self.tester.get_local_port(self.used_dut_port)
> self.tester_intf = self.tester.get_interface(tester_port)
> -
> self.dut.generate_sriov_vfs_by_port(
> self.used_dut_port, 2, driver=driver)
> self.sriov_vfs_port = self.dut.ports_info[ @@ -276,14 +274,11 @@ class
> TestShutdownApi(TestCase):
> for port in self.sriov_vfs_port:
> port.bind_driver(self.vf_driver)
> time.sleep(1)
> - self.dut_testpmd = PmdOutput(self.dut)
> - self.dut_testpmd.start_testpmd(
> - "Default", "--rxq=4 --txq=4 --port-topology=chained")
> - self.dut_testpmd.execute_cmd("start")
> - time.sleep(5)
>
> vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
> -
> + self.host_intf = self.dut.ports_info[self.used_dut_port]['intf']
> + self.vf_mac = "00:01:23:45:67:89"
> + self.dut.send_expect("ip link set %s vf 0 mac %s" %
> + (self.host_intf, self.vf_mac), "# ")
> # set up VM0 ENV
> self.vm0 = QEMUKvm(self.dut, 'vm0', 'shutdown_api')
> self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop) @@ -
> 294,30 +289,35 @@ class TestShutdownApi(TestCase):
> except Exception as e:
> self.destroy_vm_env()
> raise Exception(e)
> -
> self.vm0_dut_ports = self.vm0_dut.get_ports('any')
> self.vm0_testpmd = PmdOutput(self.vm0_dut)
>
> self.vm_env_done = True
> - self.dut_testpmd.quit()
> - self.bind_nic_driver(self.dut_ports[:1], driver=self.vf_driver)
> +
>
> def destroy_vm_env(self):
> + if getattr(self, 'used_dut_port', None) is not None:
> + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
> + self.used_dut_port = None
> +
> + for port in self.ports:
> + self.dut.send_expect("ethtool -s %s autoneg on " %
> + self.dut.ports_info[port]["intf"], "#")
> +
> + self.bind_nic_driver(self.dut_ports, driver=self.used_driver or
> + self.drivername)
> +
> if not self.vm_env_done:
> return
> +
> + if getattr(self, 'self.vm0_testpmd', None):
> + self.vm0_testpmd.quit()
> +
> if getattr(self, 'vm0', None):
> - self.vm0_dut.kill_all()
> + if getattr(self, 'vm0_dut', None):
> + self.vm0_dut.kill_all()
> self.vm0_testpmd = None
> self.vm0_dut_ports = None
> # destroy vm0
> self.vm0.stop()
> - self.vm0 = None
> -
> - if getattr(self, 'used_dut_port', None):
> - self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
> - port = self.dut.ports_info[self.used_dut_port]['port']
> - self.used_dut_port = None
> -
> self.vm_env_done = False
>
> def test_stop_restart(self):
> @@ -525,47 +525,53 @@ class TestShutdownApi(TestCase):
> self.dut.send_expect("start", "testpmd> ")
> self.check_forwarding()
> self.dut.send_expect("stop", "testpmd> ")
> -
> def test_change_linkspeed_vf(self):
> """
> Change Link Speed VF .
> """
> - self.setup_vm_env()
> self.check_vf_link_status()
> out = self.tester.send_expect(
> "ethtool %s" %
> self.tester.get_interface(self.tester.get_local_port(self.ports[0])), "# ", 100)
>
> - self.verify("Supports auto-negotiation: Yes" in out, "Auto-negotiation not
> support.")
> -
> + dut_out=self.dut.send_expect("ethtool %s" % self.dut.ports_info[0]["intf"],
> "# ", 100)
> + check_auto_negotiation="Supports auto-negotiation: Yes"
> + self.verify(check_auto_negotiation in out and
> + check_auto_negotiation in dut_out , "tester or dut Auto-negotiation
> + not support.")
> result_scanner = r"([0-9]+)base\S*/([A-Za-z]+)"
> scanner = re.compile(result_scanner, re.DOTALL)
> - m = scanner.findall(out)
> + m = scanner.findall(dut_out)
> configs = m[:-int(len(m) / 2)]
>
> if not self.check_linkspeed_config(configs):
> - return;
> + return
>
> result_linkspeed_scanner = r"Link\s*speed:\s([0-9]+)\s*Mbps"
> linkspeed_scanner = re.compile(result_linkspeed_scanner, re.DOTALL)
> result_linktype_scanner = r"Link\s*duplex:\s*(\S*)\s*-\s*duplex"
> linktype_scanner = re.compile(result_linktype_scanner, re.DOTALL)
> -
> + tx_rx_packets = 3
> + self.vm0_testpmd.execute_cmd('set fwd mac', "testpmd> ", 30)
> + self.vm0_testpmd.execute_cmd('start')
> for config in configs:
> print(config)
> - if self.nic in ["ironpond"]:
> - if config[0] != '1000' or '10000':
> - continue
> - elif self.nic in ["sagepond"]:
> - if config[0] != '1000' and '10000':
> - continue
> - self.dut.send_expect("port stop all", "testpmd> ", 100)
> for port in self.ports:
> - self.dut.send_expect("port config %d speed %s duplex %s" % (port,
> - config[0], config[1].lower()), "testpmd> ")
> - self.dut.send_expect("set fwd mac", "testpmd>")
> - self.dut.send_expect("port start all", "testpmd> ", 100)
> - time.sleep(8) # sleep few seconds for link stable
> - # check changing VF link speed is supported or not.
> + if len(configs) != 1:
> + self.dut.send_expect(
> + "ethtool -s %s autoneg off speed %s duplex %s" %
> (self.dut.ports_info[port]["intf"],
> + config[0], config[1].lower()), "#")
> + time.sleep(5)
> + self.tester_itf_1 = self.tester.get_interface(port)
> + pkt = 'Ether(dst="%s", src="02:00:00:00:00:01")/IP()/UDP()/("X"*22)' %
> self.vf_mac
> + self.tester.scapy_append(
> + 'sendp([%s], iface="%s", count=%d)'
> + % (pkt, self.tester_intf, tx_rx_packets))
> + self.tester.scapy_execute()
> + time.sleep(2)
> + out = self.vm0_testpmd.execute_cmd('show port stats all')
> + self.verify("RX-packets: %d" % tx_rx_packets in out and "TX-
> packets: %d" % tx_rx_packets in out,
> + "VF Expected results: RX-packets: %d \n Actual results:%s " %
> (tx_rx_packets, out))
> + self.vm0_testpmd.execute_cmd('clear port stats all')
> + time.sleep(1)
> +
> out = self.vm0_testpmd.execute_cmd('show port info all')
>
> linkspeed = linkspeed_scanner.findall(out) @@ -575,12 +581,7 @@ class
> TestShutdownApi(TestCase):
> "Wrong VF speed reported by the self.tester.")
> self.verify(config[1].lower() == linktype[0].lower(),
> "Wrong VF link type reported by the self.tester.")
> - # quit vm
> - self.vm0_testpmd.quit()
> - self.dut_testpmd.quit()
> - time.sleep(3)
> - self.vm0_dut.kill_all()
> - self.destroy_vm_env()
> +
>
> def test_enable_disablejumbo(self):
> """
> @@ -818,8 +819,11 @@ class TestShutdownApi(TestCase):
> """
> Run after each test case.
> """
> + if self._suite_result.test_case == "test_change_linkspeed_vf":
> + self.destroy_vm_env()
> self.dut.kill_all()
> - self.pmdout.start_testpmd("Default", "--portmask=%s --port-
> topology=loop" % utils.create_mask(self.ports), socket=self.ports_socket)
> + self.pmdout.start_testpmd("Default", "--portmask=%s --port-
> topology=loop" % utils.create_mask(self.ports),
> + socket=self.ports_socket)
> ports_num = len(self.ports)
> # link up test, to avoid failing further tests if link was down
> for i in range(ports_num):
> @@ -828,12 +832,11 @@ class TestShutdownApi(TestCase):
> # start ports, to avodi failing further tests if ports are stoped
> self.dut.send_expect("port start all", "testpmd> ", 100)
> self.dut.send_expect("quit", "# ")
> +
>
>
> def tear_down_all(self):
> """
> Run after each test suite.
> """
> - if self.vm_env_done:
> - self.destroy_vm_env()
> self.dut.kill_all()
> --
> 2.17.2
next prev parent reply other threads:[~2020-06-04 9:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 9:06 xizhan4x
2020-05-28 2:11 ` Zhang, XiX
2020-06-04 9:25 ` Fu, Qi [this message]
2020-06-11 12:22 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MWHPR11MB13920B9FC56CBBD3B8E39150EA890@MWHPR11MB1392.namprd11.prod.outlook.com \
--to=qi.fu@intel.com \
--cc=dts@dpdk.org \
--cc=xix.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).