30/04/2021 14:52:15 dts: TEST SUITE : TestMtuUpdate 30/04/2021 14:52:15 dts: NIC : foxville 30/04/2021 14:52:15 dut.10.240.183.171: 30/04/2021 14:52:15 tester: 30/04/2021 14:52:35 TestMtuUpdate: Test Case test_mtu_checks_100 Result SKIPPED: 30/04/2021 14:52:35 TestMtuUpdate: Test Case test_mtu_checks_1500 Begin 30/04/2021 14:52:35 dut.10.240.183.171: 30/04/2021 14:52:35 tester: 30/04/2021 14:52:35 dut.10.240.183.171: kill_all: called by dut and has no prefix list. 30/04/2021 14:52:36 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2 -n 4 -a 0000:81:00.0 -a 0000:86:00.0 --file-prefix=dpdk_31694_20210430145158 -- -i 30/04/2021 14:52:38 dut.10.240.183.171: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/dpdk_31694_20210430145158/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: VFIO support initialized EAL: Using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=155456, size=2176, socket=0 testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=155456, size=2176, socket=1 testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 00:A0:C9:00:00:00 Configuring Port 1 (socket 1) Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:52:48 dut.10.240.183.171: port stop all 30/04/2021 14:52:48 dut.10.240.183.171: Stopping ports... Checking link statuses... Done 30/04/2021 14:52:48 dut.10.240.183.171: port config mtu 0 1500 30/04/2021 14:52:48 dut.10.240.183.171: 30/04/2021 14:52:48 dut.10.240.183.171: port config mtu 1 1500 30/04/2021 14:52:48 dut.10.240.183.171: 30/04/2021 14:52:48 dut.10.240.183.171: show port info 0 30/04/2021 14:52:48 dut.10.240.183.171: ********************* Infos for port 0 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:81:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 1500 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:52:48 dut.10.240.183.171: show port info 1 30/04/2021 14:52:48 dut.10.240.183.171: ********************* Infos for port 1 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:86:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 1500 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:52:48 dut.10.240.183.171: port start all 30/04/2021 14:52:48 dut.10.240.183.171: Port 0: 00:A0:C9:00:00:00 Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:52:48 dut.10.240.183.171: set fwd mac 30/04/2021 14:52:49 dut.10.240.183.171: Set mac packet forwarding mode 30/04/2021 14:52:49 dut.10.240.183.171: start 30/04/2021 14:52:49 dut.10.240.183.171: mac packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 mac packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x0 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 30/04/2021 14:52:49 dut.10.240.183.171: show port stats 1 30/04/2021 14:52:49 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:52:49 dut.10.240.183.171: show port stats 0 30/04/2021 14:52:49 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:52:49 tester: echo -n '' > scapyResult.txt 30/04/2021 14:52:49 tester: 30/04/2021 14:52:49 tester: scapy 30/04/2021 14:52:50 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like I craft my beer.  scccccp///pSP///p p//Y | -- Jean De Clerck  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:52:52 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:52:52 tester:  30/04/2021 14:52:52 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*1479), iface="eno3") 30/04/2021 14:52:52 tester: . Sent 1 packets. 30/04/2021 14:52:54 tester: exit() 30/04/2021 14:52:54 tester: 30/04/2021 14:52:59 dut.10.240.183.171: show port stats 1 30/04/2021 14:52:59 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 1513 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 1128 ############################################################################ 30/04/2021 14:52:59 dut.10.240.183.171: show port stats 0 30/04/2021 14:52:59 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 1513 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 1128 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:52:59 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:00 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 1513 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:00 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:00 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 1513 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:00 tester: echo -n '' > scapyResult.txt 30/04/2021 14:53:00 tester: 30/04/2021 14:53:00 tester: scapy 30/04/2021 14:53:01 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | What is dead may never die!  scccccp///pSP///p p//Y | -- Python 2  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:53:03 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:53:03 tester:  30/04/2021 14:53:03 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*1480), iface="eno3") 30/04/2021 14:53:03 tester: . Sent 1 packets. 30/04/2021 14:53:05 tester: exit() 30/04/2021 14:53:05 tester: 30/04/2021 14:53:10 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:10 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 3027 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 1136 ############################################################################ 30/04/2021 14:53:10 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:10 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 3027 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 1136 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:10 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:10 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 3027 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:10 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:10 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 3027 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:10 tester: echo -n '' > scapyResult.txt 30/04/2021 14:53:10 tester: 30/04/2021 14:53:10 tester: scapy 30/04/2021 14:53:11 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets like it is your last  scccccp///pSP///p p//Y | day on earth.  sY/////////y caa S//P | -- Lao-Tze  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:53:13 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:53:13 tester:  30/04/2021 14:53:13 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*1481), iface="eno3") 30/04/2021 14:53:14 tester: . Sent 1 packets. 30/04/2021 14:53:16 tester: exit() 30/04/2021 14:53:16 tester: 30/04/2021 14:53:21 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:21 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 3027 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:21 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:21 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 3027 RX-errors: 1 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:21 dut.10.240.183.171: stop 30/04/2021 14:53:21 dut.10.240.183.171: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 2 RX-dropped: 0 RX-total: 2 RX-error: 1 RX-nombufs: 0 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 0 RX-dropped: 0 RX-total: 0 TX-packets: 2 TX-dropped: 0 TX-total: 2 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 2 RX-dropped: 0 RX-total: 2 TX-packets: 2 TX-dropped: 0 TX-total: 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 30/04/2021 14:53:21 dut.10.240.183.171: quit 30/04/2021 14:53:22 dut.10.240.183.171: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 30/04/2021 14:53:22 TestMtuUpdate: Test Case test_mtu_checks_1500 Result PASSED: 30/04/2021 14:53:22 dut.10.240.183.171: kill_all: called by dut and prefix list has value. 30/04/2021 14:53:23 dut.10.240.183.171: There are some dpdk process not free hugepage 30/04/2021 14:53:23 dut.10.240.183.171: ************************************** 30/04/2021 14:53:23 dut.10.240.183.171: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/972/gvfs Output information may be incomplete. 30/04/2021 14:53:23 dut.10.240.183.171: ************************************** 30/04/2021 14:53:23 TestMtuUpdate: Test Case test_mtu_checks_2400 Begin 30/04/2021 14:53:23 dut.10.240.183.171: 30/04/2021 14:53:23 tester: 30/04/2021 14:53:23 dut.10.240.183.171: kill_all: called by dut and has no prefix list. 30/04/2021 14:53:24 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2 -n 4 -a 0000:81:00.0 -a 0000:86:00.0 --file-prefix=dpdk_31694_20210430145158 -- -i 30/04/2021 14:53:26 dut.10.240.183.171: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/dpdk_31694_20210430145158/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: VFIO support initialized EAL: Using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=155456, size=2176, socket=0 testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=155456, size=2176, socket=1 testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 00:A0:C9:00:00:00 Configuring Port 1 (socket 1) Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:53:36 dut.10.240.183.171: port stop all 30/04/2021 14:53:36 dut.10.240.183.171: Stopping ports... Checking link statuses... Done 30/04/2021 14:53:36 dut.10.240.183.171: port config mtu 0 2400 30/04/2021 14:53:36 dut.10.240.183.171: 30/04/2021 14:53:36 dut.10.240.183.171: port config mtu 1 2400 30/04/2021 14:53:36 dut.10.240.183.171: 30/04/2021 14:53:36 dut.10.240.183.171: show port info 0 30/04/2021 14:53:36 dut.10.240.183.171: ********************* Infos for port 0 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:81:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 2400 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:53:36 dut.10.240.183.171: show port info 1 30/04/2021 14:53:36 dut.10.240.183.171: ********************* Infos for port 1 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:86:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 2400 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:53:36 dut.10.240.183.171: port start all 30/04/2021 14:53:36 dut.10.240.183.171: Port 0: 00:A0:C9:00:00:00 Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:53:36 dut.10.240.183.171: set fwd mac 30/04/2021 14:53:36 dut.10.240.183.171: Set mac packet forwarding mode 30/04/2021 14:53:36 dut.10.240.183.171: start 30/04/2021 14:53:36 dut.10.240.183.171: mac packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 mac packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 30/04/2021 14:53:36 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:36 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:36 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:37 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:37 tester: echo -n '' > scapyResult.txt 30/04/2021 14:53:37 tester: 30/04/2021 14:53:37 tester: scapy 30/04/2021 14:53:38 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:53:40 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:53:40 tester:  30/04/2021 14:53:40 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*2383), iface="eno3") 30/04/2021 14:53:40 tester: . Sent 1 packets. 30/04/2021 14:53:42 tester: exit() 30/04/2021 14:53:42 tester: 30/04/2021 14:53:47 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:47 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 2417 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 1792 ############################################################################ 30/04/2021 14:53:47 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:47 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 2417 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 1792 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:47 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:47 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 2417 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:47 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:47 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 2417 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:47 tester: echo -n '' > scapyResult.txt 30/04/2021 14:53:47 tester: 30/04/2021 14:53:47 tester: scapy 30/04/2021 14:53:49 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | What is dead may never die!  scccccp///pSP///p p//Y | -- Python 2  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:53:51 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:53:51 tester:  30/04/2021 14:53:51 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*2384), iface="eno3") 30/04/2021 14:53:51 tester: . Sent 1 packets. 30/04/2021 14:53:53 tester: exit() 30/04/2021 14:53:53 tester: 30/04/2021 14:53:58 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:58 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 4835 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 1808 ############################################################################ 30/04/2021 14:53:58 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:58 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 4835 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 1808 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:58 dut.10.240.183.171: show port stats 1 30/04/2021 14:53:58 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 4835 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:58 dut.10.240.183.171: show port stats 0 30/04/2021 14:53:58 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 4835 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:53:58 tester: echo -n '' > scapyResult.txt 30/04/2021 14:53:58 tester: 30/04/2021 14:53:58 tester: scapy 30/04/2021 14:53:59 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | To craft a packet, you have to be a  scccccp///pSP///p p//Y | packet, and learn how to swim in  sY/////////y caa S//P | the wires and in the waves.  cayCyayP//Ya pY/Ya | -- Jean-Claude Van Damme  sY/PsY////YCc aC//Yp  |  sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:54:01 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:54:01 tester:  30/04/2021 14:54:01 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*2385), iface="eno3") 30/04/2021 14:54:01 tester: . Sent 1 packets. 30/04/2021 14:54:03 tester: exit() 30/04/2021 14:54:04 tester: 30/04/2021 14:54:09 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:09 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 4835 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:09 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:09 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 4835 RX-errors: 1 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:09 dut.10.240.183.171: stop 30/04/2021 14:54:09 dut.10.240.183.171: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 2 RX-dropped: 0 RX-total: 2 RX-error: 1 RX-nombufs: 0 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 0 RX-dropped: 0 RX-total: 0 TX-packets: 2 TX-dropped: 0 TX-total: 2 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 2 RX-dropped: 0 RX-total: 2 TX-packets: 2 TX-dropped: 0 TX-total: 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 30/04/2021 14:54:09 dut.10.240.183.171: quit 30/04/2021 14:54:10 dut.10.240.183.171: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 30/04/2021 14:54:10 TestMtuUpdate: Test Case test_mtu_checks_2400 Result PASSED: 30/04/2021 14:54:10 dut.10.240.183.171: kill_all: called by dut and prefix list has value. 30/04/2021 14:54:11 dut.10.240.183.171: There are some dpdk process not free hugepage 30/04/2021 14:54:11 dut.10.240.183.171: ************************************** 30/04/2021 14:54:11 dut.10.240.183.171: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/972/gvfs Output information may be incomplete. 30/04/2021 14:54:11 dut.10.240.183.171: ************************************** 30/04/2021 14:54:11 TestMtuUpdate: Test Case test_mtu_checks_4800 Begin 30/04/2021 14:54:11 dut.10.240.183.171: 30/04/2021 14:54:11 tester: 30/04/2021 14:54:11 dut.10.240.183.171: kill_all: called by dut and has no prefix list. 30/04/2021 14:54:12 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2 -n 4 -a 0000:81:00.0 -a 0000:86:00.0 --file-prefix=dpdk_31694_20210430145158 -- -i 30/04/2021 14:54:13 dut.10.240.183.171: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/dpdk_31694_20210430145158/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: VFIO support initialized EAL: Using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=155456, size=2176, socket=0 testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=155456, size=2176, socket=1 testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 00:A0:C9:00:00:00 Configuring Port 1 (socket 1) Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:54:23 dut.10.240.183.171: port stop all 30/04/2021 14:54:24 dut.10.240.183.171: Stopping ports... Checking link statuses... Done 30/04/2021 14:54:24 dut.10.240.183.171: port config mtu 0 4800 30/04/2021 14:54:24 dut.10.240.183.171: 30/04/2021 14:54:24 dut.10.240.183.171: port config mtu 1 4800 30/04/2021 14:54:24 dut.10.240.183.171: 30/04/2021 14:54:24 dut.10.240.183.171: show port info 0 30/04/2021 14:54:24 dut.10.240.183.171: ********************* Infos for port 0 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:81:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 4800 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:54:24 dut.10.240.183.171: show port info 1 30/04/2021 14:54:24 dut.10.240.183.171: ********************* Infos for port 1 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:86:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 4800 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:54:24 dut.10.240.183.171: port start all 30/04/2021 14:54:24 dut.10.240.183.171: Port 0: 00:A0:C9:00:00:00 Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:54:24 dut.10.240.183.171: set fwd mac 30/04/2021 14:54:24 dut.10.240.183.171: Set mac packet forwarding mode 30/04/2021 14:54:24 dut.10.240.183.171: start 30/04/2021 14:54:24 dut.10.240.183.171: mac packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 mac packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 30/04/2021 14:54:24 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:24 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:24 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:24 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:24 tester: echo -n '' > scapyResult.txt 30/04/2021 14:54:24 tester: 30/04/2021 14:54:24 tester: scapy 30/04/2021 14:54:26 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets before they craft  scccccp///pSP///p p//Y | you.  sY/////////y caa S//P | -- Socrate  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:54:28 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:54:28 tester:  30/04/2021 14:54:28 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*4783), iface="eno3") 30/04/2021 14:54:28 tester: . Sent 1 packets. 30/04/2021 14:54:30 tester: exit() 30/04/2021 14:54:30 tester: 30/04/2021 14:54:35 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:35 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 4817 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 3584 ############################################################################ 30/04/2021 14:54:35 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:35 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 4817 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 3584 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:35 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:35 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 4817 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:35 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:35 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 4817 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:35 tester: echo -n '' > scapyResult.txt 30/04/2021 14:54:35 tester: 30/04/2021 14:54:35 tester: scapy 30/04/2021 14:54:36 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft packets before they craft  scccccp///pSP///p p//Y | you.  sY/////////y caa S//P | -- Socrate  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:54:38 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:54:39 tester:  30/04/2021 14:54:39 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*4784), iface="eno3") 30/04/2021 14:54:39 tester: . Sent 1 packets. 30/04/2021 14:54:41 tester: exit() 30/04/2021 14:54:41 tester: 30/04/2021 14:54:46 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:46 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 9635 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 3616 ############################################################################ 30/04/2021 14:54:46 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:46 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 9635 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 3616 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:46 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:46 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 9635 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:46 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:46 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 9635 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:46 tester: echo -n '' > scapyResult.txt 30/04/2021 14:54:46 tester: 30/04/2021 14:54:46 tester: scapy 30/04/2021 14:54:47 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:54:49 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:54:49 tester:  30/04/2021 14:54:49 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*4785), iface="eno3") 30/04/2021 14:54:49 tester: . Sent 1 packets. 30/04/2021 14:54:51 tester: exit() 30/04/2021 14:54:51 tester: 30/04/2021 14:54:56 dut.10.240.183.171: show port stats 1 30/04/2021 14:54:57 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 9635 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:57 dut.10.240.183.171: show port stats 0 30/04/2021 14:54:57 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 9635 RX-errors: 1 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:54:57 dut.10.240.183.171: stop 30/04/2021 14:54:57 dut.10.240.183.171: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 2 RX-dropped: 0 RX-total: 2 RX-error: 1 RX-nombufs: 0 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 0 RX-dropped: 0 RX-total: 0 TX-packets: 2 TX-dropped: 0 TX-total: 2 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 2 RX-dropped: 0 RX-total: 2 TX-packets: 2 TX-dropped: 0 TX-total: 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 30/04/2021 14:54:57 dut.10.240.183.171: quit 30/04/2021 14:54:58 dut.10.240.183.171: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 30/04/2021 14:54:58 TestMtuUpdate: Test Case test_mtu_checks_4800 Result PASSED: 30/04/2021 14:54:58 dut.10.240.183.171: kill_all: called by dut and prefix list has value. 30/04/2021 14:54:59 dut.10.240.183.171: There are some dpdk process not free hugepage 30/04/2021 14:54:59 dut.10.240.183.171: ************************************** 30/04/2021 14:54:59 dut.10.240.183.171: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/972/gvfs Output information may be incomplete. 30/04/2021 14:54:59 dut.10.240.183.171: ************************************** 30/04/2021 14:54:59 TestMtuUpdate: Test Case test_mtu_checks_9000 Begin 30/04/2021 14:54:59 dut.10.240.183.171: 30/04/2021 14:54:59 tester: 30/04/2021 14:54:59 dut.10.240.183.171: kill_all: called by dut and has no prefix list. 30/04/2021 14:55:00 dut.10.240.183.171: x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2 -n 4 -a 0000:81:00.0 -a 0000:86:00.0 --file-prefix=dpdk_31694_20210430145158 -- -i 30/04/2021 14:55:01 dut.10.240.183.171: EAL: Detected 88 lcore(s) EAL: Detected 2 NUMA nodes EAL: Detected static linkage of DPDK EAL: Multi-process socket /var/run/dpdk/dpdk_31694_20210430145158/mp_socket EAL: Selected IOVA mode 'VA' EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size EAL: VFIO support initialized EAL: Using IOMMU type 1 (Type 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:81:00.0 (socket 1) EAL: Probe PCI driver: net_igc (8086:15f2) device: 0000:86:00.0 (socket 1) Interactive-mode selected testpmd: create a new mbuf pool : n=155456, size=2176, socket=0 testpmd: preferred mempool ops selected: ring_mp_mc testpmd: create a new mbuf pool : n=155456, size=2176, socket=1 testpmd: preferred mempool ops selected: ring_mp_mc Configuring Port 0 (socket 1) Port 0: 00:A0:C9:00:00:00 Configuring Port 1 (socket 1) Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:55:11 dut.10.240.183.171: port stop all 30/04/2021 14:55:12 dut.10.240.183.171: Stopping ports... Checking link statuses... Done 30/04/2021 14:55:12 dut.10.240.183.171: port config mtu 0 9000 30/04/2021 14:55:12 dut.10.240.183.171: 30/04/2021 14:55:12 dut.10.240.183.171: port config mtu 1 9000 30/04/2021 14:55:12 dut.10.240.183.171: 30/04/2021 14:55:12 dut.10.240.183.171: show port info 0 30/04/2021 14:55:12 dut.10.240.183.171: ********************* Infos for port 0 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:81:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 9000 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:55:12 dut.10.240.183.171: show port info 1 30/04/2021 14:55:12 dut.10.240.183.171: ********************* Infos for port 1 ********************* MAC address: 00:A0:C9:00:00:00 Device name: 0000:86:00.0 Driver name: net_igc Firmware-version: 1.3, 0x800000c9 Devargs: Connect to socket: 1 memory allocation on the socket: 1 Link status: down Link speed: None Link duplex: half-duplex Autoneg status: Off MTU: 9000 Promiscuous mode: enabled Allmulticast mode: disabled Maximum number of MAC addresses: 16 Maximum number of MAC addresses of hash filtering: 0 VLAN offload: strip off, filter off, extend off, qinq strip off Hash key size in bytes: 40 Redirection table size: 128 Supported RSS offload flow types: ipv4 ipv4-tcp ipv4-udp ipv6 ipv6-tcp ipv6-udp user defined 15 user defined 16 user defined 17 Minimum size of RX buffer: 256 Maximum configurable length of RX packet: 9728 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1 Max possible RX queues: 4 Max possible number of RXDs per queue: 32768 Min possible number of RXDs per queue: 8 RXDs number alignment: 8 Current number of TX queues: 1 Max possible TX queues: 4 Max possible number of TXDs per queue: 32768 Min possible number of TXDs per queue: 8 TXDs number alignment: 8 Max segment number per packet: 255 Max segment number per MTU/TSO: 255 30/04/2021 14:55:12 dut.10.240.183.171: port start all 30/04/2021 14:55:12 dut.10.240.183.171: Port 0: 00:A0:C9:00:00:00 Port 1: 00:A0:C9:00:00:00 Checking link statuses... Done 30/04/2021 14:55:12 dut.10.240.183.171: set fwd mac 30/04/2021 14:55:12 dut.10.240.183.171: Set mac packet forwarding mode 30/04/2021 14:55:12 dut.10.240.183.171: start 30/04/2021 14:55:12 dut.10.240.183.171: mac packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native Logical Core 2 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 1) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 1) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00 mac packet forwarding packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 port 0: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 port 1: RX queue number: 1 Tx queue number: 1 Rx offloads=0x800 Tx offloads=0x0 RX queue: 0 RX desc=512 - RX free threshold=32 RX threshold registers: pthresh=8 hthresh=8 wthresh=4 RX Offloads=0x0 TX queue: 0 TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=8 hthresh=1 wthresh=16 TX offloads=0x0 - TX RS bit threshold=0 30/04/2021 14:55:12 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:12 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:12 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:12 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:12 tester: echo -n '' > scapyResult.txt 30/04/2021 14:55:12 tester: 30/04/2021 14:55:12 tester: scapy 30/04/2021 14:55:14 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:55:16 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:55:16 tester:  30/04/2021 14:55:16 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*8983), iface="eno3") 30/04/2021 14:55:16 tester: . Sent 1 packets. 30/04/2021 14:55:18 tester: exit() 30/04/2021 14:55:18 tester: 30/04/2021 14:55:23 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:23 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 9017 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 6736 ############################################################################ 30/04/2021 14:55:23 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:23 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 9017 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 6736 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:23 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:23 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 1 TX-errors: 0 TX-bytes: 9017 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:23 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:23 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 1 RX-missed: 0 RX-bytes: 9017 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:23 tester: echo -n '' > scapyResult.txt 30/04/2021 14:55:23 tester: 30/04/2021 14:55:23 tester: scapy 30/04/2021 14:55:24 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | Craft me if you can.  scccccp///pSP///p p//Y | -- IPv6 layer  sY/////////y caa S//P |  cayCyayP//Ya pY/Ya  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:55:26 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:55:26 tester:  30/04/2021 14:55:26 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*8984), iface="eno3") 30/04/2021 14:55:26 tester: . Sent 1 packets. 30/04/2021 14:55:28 tester: exit() 30/04/2021 14:55:29 tester: 30/04/2021 14:55:34 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:34 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 18035 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 6832 ############################################################################ 30/04/2021 14:55:34 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:34 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 18035 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 6832 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:34 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:34 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 18035 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:34 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:34 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 18035 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:34 tester: echo -n '' > scapyResult.txt 30/04/2021 14:55:34 tester: 30/04/2021 14:55:34 tester: scapy 30/04/2021 14:55:35 tester: INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). INFO: No IPv6 support in kernel INFO: Can't import python-cryptography v1.7+. Disabled WEP decryption/encryption. (Dot11) INFO: Can't import python-cryptography v1.7+. Disabled IPsec encryption/authentication. WARNING: IPython not available. Using standard Python shell instead. AutoCompletion, History are disabled.    aSPY//YASa   apyyyyCY//////////YCa  |  sY//////YSpcs scpCY//Pp  | Welcome to Scapy  ayp ayyyyyyySCP//Pp syY//C  | Version 2.4.4  AYAsAYYYYYYYY///Ps cY//S |  pCCCCY//p cSSps y//Y | https://github.com/secdev/  SPPPP///a pP///AC//Y |  A//A cyP////C | Have fun!  p///Ac sC///a |  P////YCpc A//A | We are in France, we say Skappee.  scccccp///pSP///p p//Y | OK? Merci.  sY/////////y caa S//P | -- Sebastien Chabal  cayCyayP//Ya pY/Ya |  sY/PsY////YCc aC//Yp   sc sccaCY//PCypaapyCP//YSs   spCPY//////YPSps   ccaacs    30/04/2021 14:55:37 tester: dutmac="00:a0:c9:00:00:00" 30/04/2021 14:55:37 tester:  30/04/2021 14:55:37 tester: sendp(Ether(dst=dutmac, src="52:00:00:00:00:00")/IP()/Raw(load="P"*8985), iface="eno3") 30/04/2021 14:55:37 tester: . Sent 1 packets. 30/04/2021 14:55:39 tester: exit() 30/04/2021 14:55:39 tester: 30/04/2021 14:55:44 dut.10.240.183.171: show port stats 1 30/04/2021 14:55:44 dut.10.240.183.171: ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 2 TX-errors: 0 TX-bytes: 18035 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:44 dut.10.240.183.171: show port stats 0 30/04/2021 14:55:44 dut.10.240.183.171: ######################## NIC statistics for port 0 ######################## RX-packets: 2 RX-missed: 0 RX-bytes: 18035 RX-errors: 1 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ 30/04/2021 14:55:44 dut.10.240.183.171: stop 30/04/2021 14:55:44 dut.10.240.183.171: Telling cores to ... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 2 RX-dropped: 0 RX-total: 2 RX-error: 1 RX-nombufs: 0 TX-packets: 0 TX-dropped: 0 TX-total: 0 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 0 RX-dropped: 0 RX-total: 0 TX-packets: 2 TX-dropped: 0 TX-total: 2 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 2 RX-dropped: 0 RX-total: 2 TX-packets: 2 TX-dropped: 0 TX-total: 2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. 30/04/2021 14:55:44 dut.10.240.183.171: quit 30/04/2021 14:55:46 dut.10.240.183.171: Stopping port 0... Stopping ports... Done Stopping port 1... Stopping ports... Done Shutting down port 0... Closing ports... Port 0 is closed Done Shutting down port 1... Closing ports... Port 1 is closed Done Bye... 30/04/2021 14:55:46 TestMtuUpdate: Test Case test_mtu_checks_9000 Result PASSED: 30/04/2021 14:55:46 dut.10.240.183.171: kill_all: called by dut and prefix list has value. 30/04/2021 14:55:46 dut.10.240.183.171: There are some dpdk process not free hugepage 30/04/2021 14:55:46 dut.10.240.183.171: ************************************** 30/04/2021 14:55:46 dut.10.240.183.171: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/972/gvfs Output information may be incomplete. 30/04/2021 14:55:46 dut.10.240.183.171: ************************************** 30/04/2021 14:55:46 dts: TEST SUITE ENDED: TestMtuUpdate