* [dts] [PATCH]tests: change packet configuration
@ 2020-09-02 15:15 Peng Yuan
2020-09-10 0:55 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Peng Yuan @ 2020-09-02 15:15 UTC (permalink / raw)
To: dts; +Cc: Peng Yuan
change packet configuration to fix traffic error.
add eal_param to adapt the tester and dut on the same server senario.
get driver type from config file.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/tests/TestSuite_softnic.py b/tests/TestSuite_softnic.py
index c6ba6b9..7752546 100644
--- a/tests/TestSuite_softnic.py
+++ b/tests/TestSuite_softnic.py
@@ -75,7 +75,8 @@ class TestSoftnic(TestCase):
self.dut.session.copy_file_to(self.firmware, self.root_path)
self.dut.session.copy_file_to(self.tm_firmware, self.root_path)
self.dut.session.copy_file_to(self.nat_firmware, self.root_path)
- self.cmd = "./%s/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/tmp/%s,cpu_id=1,conn_port=8086' -- -i --forward-mode=softnic --portmask=0x2"
+ self.eal_param = " -w %s" % self.dut.ports_info[0]['pci']
+ self.cmd = "./%s/app/testpmd -c 0x7 -s 0x4 -n 4 %s --vdev 'net_softnic0,firmware=/tmp/%s,cpu_id=1,conn_port=8086' -- -i --forward-mode=softnic --portmask=0x2"
# get dts output path
if self.logger.log_path.startswith(os.sep):
self.output_path = self.logger.log_path
@@ -90,7 +91,7 @@ class TestSoftnic(TestCase):
self.host_intf = self.dut.ports_info[self.used_dut_port]['intf']
out = self.dut.send_expect('ethtool %s' % self.host_intf, '#')
self.speed = re.findall('Supported link modes: (\d*)', out)[0]
- self.dut.bind_interfaces_linux('igb_uio', [ports[0]])
+ self.dut.bind_interfaces_linux(self.drivername, [ports[0]])
def set_up(self):
"""
@@ -106,7 +107,7 @@ class TestSoftnic(TestCase):
# 10G nic pps(M)
expect_pps = [14, 8, 4, 2, 1, 0.9, 0.8]
- self.dut.send_expect(self.cmd % (self.target, 'firmware.cli'), "testpmd>", timeout=300)
+ self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'firmware.cli'), "testpmd>", timeout=300)
self.dut.send_expect("set fwd macswap", "testpmd>")
self.dut.send_expect("start", "testpmd>")
rx_port = self.tester.get_local_port(0)
@@ -116,7 +117,7 @@ class TestSoftnic(TestCase):
payload_size = frame - self.headers_size
tgen_input = []
pcap = os.sep.join([self.output_path, "test.pcap"])
- pkt = "Ether(dst='%s')/IP()/UDP()/Raw('x'*%d)" % (self.dmac, payload_size)
+ pkt = "Ether(dst='%s')/IP()/UDP()/Raw(load='x'*%d)" % (self.dmac, payload_size)
self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, pkt))
tgen_input.append((tx_port, rx_port, pcap))
self.tester.scapy_execute()
@@ -132,11 +133,11 @@ class TestSoftnic(TestCase):
def test_perf_shaping_for_pipe(self):
self.change_config_file('tm_firmware.cli')
- self.dut.send_expect(self.cmd % (self.target, 'tm_firmware.cli'), "testpmd> ", timeout=800)
+ self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'tm_firmware.cli'), "testpmd> ", timeout=800)
self.dut.send_expect("set fwd macswap", "testpmd>")
self.dut.send_expect("start", "testpmd>")
rx_port = self.tester.get_local_port(0)
- pkts = ["Ether(dst='%s')/IP(dst='100.0.0.0')/UDP()/Raw('x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.15.255')/UDP()/Raw('x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.4.0')/UDP()/Raw('x'*(64 - %s))"]
+ pkts = ["Ether(dst='%s')/IP(dst='100.0.0.0')/UDP()/Raw(load='x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.15.255')/UDP()/Raw(load='x'*(64 - %s))", "Ether(dst='%s')/IP(dst='100.0.4.0')/UDP()/Raw(load='x'*(64 - %s))"]
except_bps_range = [1700000, 2000000]
for i in range(3):
@@ -169,7 +170,7 @@ class TestSoftnic(TestCase):
for t in pkt_type:
for i in range(2):
self.dut.send_expect("sed -i -e '12c table action profile AP0 ipv4 offset 270 fwd nat %s proto %s' %s" % (pkt_location[i], t, self.root_path + 'nat_firmware.cli'), "#")
- self.dut.send_expect(self.cmd % (self.target, 'nat_firmware.cli'), "testpmd>", timeout=60)
+ self.dut.send_expect(self.cmd % (self.target, self.eal_param, 'nat_firmware.cli'), "testpmd>", timeout=60)
self.dut.send_expect("start", "testpmd>")
# src ip tcp
for j in range(2):
@@ -182,9 +183,9 @@ class TestSoftnic(TestCase):
self.tester.scapy_foreground()
pkt = "Ether(dst='%s')/IP(dst='%s')/" % (self.dmac, ip)
if pkt_type == 'tcp':
- pkt = pkt + "TCP()/Raw('x'*20)"
+ pkt = pkt + "TCP()/Raw(load='x'*20)"
else:
- pkt = pkt + "UDP()/Raw('x'*20)"
+ pkt = pkt + "UDP()/Raw(load='x'*20)"
self.tester.scapy_append('sendp([%s], iface="%s")' % (pkt, self.txItf))
self.start_tcpdump(self.txItf)
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH]tests: change packet configuration
2020-09-02 15:15 [dts] [PATCH]tests: change packet configuration Peng Yuan
@ 2020-09-10 0:55 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-09-10 0:55 UTC (permalink / raw)
To: Peng, Yuan, dts; +Cc: Peng, Yuan
> Subject: [dts] [PATCH]tests: change packet configuration
>
> change packet configuration to fix traffic error.
> add eal_param to adapt the tester and dut on the same server senario.
> get driver type from config file.
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-09-10 0:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-02 15:15 [dts] [PATCH]tests: change packet configuration Peng Yuan
2020-09-10 0:55 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).