* [dpdk-stable] [PATCH v3] net/mlx5: fix init with zero Rx queues
[not found] <02664e0b50e375e0b0d4ee05c8ad554295b0ccde.1556794185.git.dekelp@mellanox.com>
@ 2019-05-05 11:44 ` Dekel Peled
2019-05-08 4:44 ` [dpdk-stable] [dpdk-dev] " Shahaf Shuler
0 siblings, 1 reply; 2+ messages in thread
From: Dekel Peled @ 2019-05-05 11:44 UTC (permalink / raw)
To: yskoh, shahafs; +Cc: dev, stable
Recent patch [1] added, at the end of mlx5_dev_configure(), a call to
mlx5_proc_priv_init(), initializing process_private data of eth_dev.
This call is not reached if PMD is started with zero Rx queues.
In this case mlx5_dev_configure() returns earlier due to the check:
if (rxqs_n == priv->rxqs_n)
return 0;
In such a scenario, later references to uninitialized process_private
data will result in segmentation fault.
For example see in function txq_uar_init().
This patch changes the check logic. The following code is executed
if (rxqs_n != priv->rxqs_n), and skipped otherwise.
Function mlx5_proc_priv_init() is always invoked, to ensure
process_private data is initialized.
[1] http://patches.dpdk.org/patch/52629/
Fixes: 120dc4a7dcd3 ("net/mlx5: remove device register remap")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
v2: Update logic after code review.
v3: Remove unrelated code that was wrongly added in v2.
---
---
drivers/net/mlx5/mlx5_ethdev.c | 46 +++++++++++++++++++++++-------------------
1 file changed, 25 insertions(+), 21 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index d1a70fc..80ee98f 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -428,27 +428,31 @@ struct ethtool_link_settings {
rte_errno = EINVAL;
return -rte_errno;
}
- if (rxqs_n == priv->rxqs_n)
- return 0;
- DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u",
- dev->data->port_id, priv->rxqs_n, rxqs_n);
- priv->rxqs_n = rxqs_n;
- /* If the requested number of RX queues is not a power of two, use the
- * maximum indirection table size for better balancing.
- * The result is always rounded to the next power of two. */
- reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
- priv->config.ind_table_max_size :
- rxqs_n));
- ret = mlx5_rss_reta_index_resize(dev, reta_idx_n);
- if (ret)
- return ret;
- /* When the number of RX queues is not a power of two, the remaining
- * table entries are padded with reused WQs and hashes are not spread
- * uniformly. */
- for (i = 0, j = 0; (i != reta_idx_n); ++i) {
- (*priv->reta_idx)[i] = j;
- if (++j == rxqs_n)
- j = 0;
+ if (rxqs_n != priv->rxqs_n) {
+ DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u",
+ dev->data->port_id, priv->rxqs_n, rxqs_n);
+ priv->rxqs_n = rxqs_n;
+ /*
+ * If the requested number of RX queues is not a power of two,
+ * use the maximum indirection table size for better balancing.
+ * The result is always rounded to the next power of two.
+ */
+ reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
+ priv->config.ind_table_max_size :
+ rxqs_n));
+ ret = mlx5_rss_reta_index_resize(dev, reta_idx_n);
+ if (ret)
+ return ret;
+ /*
+ * When the number of RX queues is not a power of two,
+ * the remaining table entries are padded with reused WQs
+ * and hashes are not spread uniformly.
+ */
+ for (i = 0, j = 0; (i != reta_idx_n); ++i) {
+ (*priv->reta_idx)[i] = j;
+ if (++j == rxqs_n)
+ j = 0;
+ }
}
ret = mlx5_proc_priv_init(dev);
if (ret)
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread