patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH] doc: fix typos in testpmd user guide
@ 2019-03-31 10:20 Dekel Peled
  2019-04-01 16:19 ` [dpdk-stable] [dpdk-dev] " Iremonger, Bernard
  0 siblings, 1 reply; 3+ messages in thread
From: Dekel Peled @ 2019-03-31 10:20 UTC (permalink / raw)
  To: jingjing.wu, wenzhuo.lu; +Cc: dev, orika, stable

Correct typing mistakes in several places.
1) "Those command will" ==> "These commands will"
2) icmp6_nd_opt_sla_eth ==> icmp6_nd_opt_tla_eth
   (change 's' to 't' for 'target' where applicable)

Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")
Cc: stable@dpdk.org

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index c6f8b2c..9de3bf7 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1587,7 +1587,7 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
  udp-dst (udp-dst) ip-tos (ip-tos) ip-ttl (ip-ttl) ip-src (ip-src) \
  ip-dst (ip-dst) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action vxlan_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1602,7 +1602,7 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
  set nvgre-with-vlan ip-version (ipv4|ipv6) tni (tni) ip-src (ip-src) \
         ip-dst (ip-dst) vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action nvgre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1645,7 +1645,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
         ip-src (ip-src) ip-dst (ip-dst) vlan-tci (vlan-tci) \
         eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1658,7 +1658,7 @@ Configure the outer layer to decapsulate MPLSoGRE packet::
  set mplsogre_decap ip-version (ipv4|ipv6)
  set mplsogre_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1675,7 +1675,7 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
         udp-src (udp-src) udp-dst (udp-dst) ip-src (ip-src) ip-dst (ip-dst) \
         vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -1688,7 +1688,7 @@ Configure the outer layer to decapsulate MPLSoUDP packet::
  set mplsoudp_decap ip-version (ipv4|ipv6)
  set mplsoudp_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
 before the flow rule creation.
@@ -3709,7 +3709,7 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``sla {MAC-48}``: source Ethernet LLA.
 
-- ``icmp6_nd_opt_sla_eth``: match ICMPv6 neighbor discovery target Ethernet
+- ``icmp6_nd_opt_tla_eth``: match ICMPv6 neighbor discovery target Ethernet
   link-layer address option.
 
   - ``tla {MAC-48}``: target Ethernet LLA.
-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-04-02 15:32 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-31 10:20 [dpdk-stable] [PATCH] doc: fix typos in testpmd user guide Dekel Peled
2019-04-01 16:19 ` [dpdk-stable] [dpdk-dev] " Iremonger, Bernard
2019-04-02 15:32   ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).