patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Xueming Li <xuemingl@nvidia.com>
To: Matan Azrad <matan@nvidia.com>,
	Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Cc: dev@dpdk.org, Asaf Penso <asafp@nvidia.com>,
	xuemingl@nvidia.com, stable@dpdk.org
Subject: [dpdk-stable] [PATCH] net/mlx5: use bond index for netdev operations
Date: Tue, 15 Sep 2020 03:05:53 +0000	[thread overview]
Message-ID: <1600139153-9990-1-git-send-email-xuemingl@nvidia.com> (raw)

In case of bonding, device ifindex was detected as the PF ifindex, so
any operation using ifindex applied to PF instead of the bond device.
These operations includes MTU get/set, up/down and mac address
manipulation, etc.

This patch detects bond interface ifindex and name for PF that join a
bond interface, uses it by default for netdev operations.

Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
---
 drivers/net/mlx5/linux/mlx5_ethdev_os.c | 56 +++++++++++++++++++++++++
 drivers/net/mlx5/linux/mlx5_os.c        | 13 ++++++
 drivers/net/mlx5/mlx5.h                 |  4 ++
 drivers/net/mlx5/mlx5_ethdev.c          |  2 +-
 4 files changed, 74 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mlx5/linux/mlx5_ethdev_os.c b/drivers/net/mlx5/linux/mlx5_ethdev_os.c
index 7256c1bcfe..593b0d08ac 100644
--- a/drivers/net/mlx5/linux/mlx5_ethdev_os.c
+++ b/drivers/net/mlx5/linux/mlx5_ethdev_os.c
@@ -151,6 +151,10 @@ mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])
 
 	MLX5_ASSERT(priv);
 	MLX5_ASSERT(priv->sh);
+	if (priv->bond_ifindex > 0) {
+		memcpy(ifname, priv->bond_name, IF_NAMESIZE);
+		return 0;
+	}
 	ifindex = mlx5_ifindex(dev);
 	if (!ifindex) {
 		if (!priv->representor)
@@ -1101,6 +1105,58 @@ mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)
 	return 0;
 }
 
+/**
+ * Get bond information associated with network interface.
+ *
+ * @param pf_ifindex
+ *   Network interface index of bond slave interface
+ * @param[out] ifindex
+ *   Pointer to bond ifindex.
+ * @param[out] ifname
+ *   Pointer to bond ifname.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_sysfs_bond_info(unsigned int pf_ifindex, unsigned int *ifindex,
+		     char *ifname)
+{
+	char name[IF_NAMESIZE];
+	FILE *file;
+	unsigned int index;
+	int ret;
+
+	if (!if_indextoname(pf_ifindex, name) || !strlen(name)) {
+		rte_errno = errno;
+		return -rte_errno;
+	}
+	MKSTR(bond_if, "/sys/class/net/%s/master/ifindex", name);
+	/* read bond ifindex */
+	file = fopen(bond_if, "rb");
+	if (file == NULL) {
+		rte_errno = errno;
+		return -rte_errno;
+	}
+	ret = fscanf(file, "%u", &index);
+	fclose(file);
+	if (ret <= 0) {
+		rte_errno = errno;
+		return -rte_errno;
+	}
+	if (ifindex)
+		*ifindex = index;
+
+	/* read bond device name from symbol link */
+	if (ifname) {
+		if (!if_indextoname(index, ifname)) {
+			rte_errno = errno;
+			return -rte_errno;
+		}
+	}
+	return 0;
+}
+
 /**
  * DPDK callback to retrieve plug-in module EEPROM information (type and size).
  *
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 5f1e9520f7..b4c80d7af0 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -1168,6 +1168,19 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
 	 */
 	MLX5_ASSERT(spawn->ifindex);
 	priv->if_index = spawn->ifindex;
+	if (priv->pf_bond >= 0 && priv->master) {
+		/* Get bond interface info */
+		err = mlx5_sysfs_bond_info(priv->if_index,
+				     &priv->bond_ifindex,
+				     priv->bond_name);
+		if (err)
+			DRV_LOG(ERR, "unable to get bond info: %s",
+				strerror(rte_errno));
+		else
+			DRV_LOG(INFO, "PF device %u, bond device %u(%s)",
+				priv->if_index, priv->bond_ifindex,
+				priv->bond_name);
+	}
 	eth_dev->data->dev_private = priv;
 	priv->dev_data = eth_dev->data;
 	eth_dev->data->mac_addrs = priv->mac;
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 1a7c712f2c..c62643ae62 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -771,6 +771,8 @@ struct mlx5_priv {
 	int32_t representor_id; /* Port representor identifier. */
 	int32_t pf_bond; /* >=0 means PF index in bonding configuration. */
 	unsigned int if_index; /* Associated kernel network device index. */
+	uint32_t bond_ifindex; /**< Bond interface index. */
+	char bond_name[IF_NAMESIZE]; /**< Bond interface name. */
 	/* RX/TX queues. */
 	unsigned int rxqs_n; /* RX queues array size. */
 	unsigned int txqs_n; /* TX queues array size. */
@@ -897,6 +899,8 @@ void mlx5_translate_port_name(const char *port_name_in,
 			      struct mlx5_switch_info *port_info_out);
 void mlx5_intr_callback_unregister(const struct rte_intr_handle *handle,
 				   rte_intr_callback_fn cb_fn, void *cb_arg);
+int mlx5_sysfs_bond_info(unsigned int pf_ifindex, unsigned int *ifindex,
+			 char *ifname);
 int mlx5_get_module_info(struct rte_eth_dev *dev,
 			 struct rte_eth_dev_module_info *modinfo);
 int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index cefb45064e..48121929de 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -43,7 +43,7 @@ mlx5_ifindex(const struct rte_eth_dev *dev)
 
 	MLX5_ASSERT(priv);
 	MLX5_ASSERT(priv->if_index);
-	ifindex = priv->if_index;
+	ifindex = priv->bond_ifindex > 0 ? priv->bond_ifindex : priv->if_index;
 	if (!ifindex)
 		rte_errno = ENXIO;
 	return ifindex;
-- 
2.25.1


             reply	other threads:[~2020-09-15  3:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-15  3:05 Xueming Li [this message]
2020-09-21  9:29 ` Slava Ovsiienko
2020-09-23  7:38 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1600139153-9990-1-git-send-email-xuemingl@nvidia.com \
    --to=xuemingl@nvidia.com \
    --cc=asafp@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=matan@nvidia.com \
    --cc=stable@dpdk.org \
    --cc=viacheslavo@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).