From: Jiawei Wang <jiaweiw@nvidia.com>
To: viacheslavo@nvidia.com, matan@nvidia.com, orika@nvidia.com,
thomas@monjalon.net
Cc: dev@dpdk.org, rasland@nvidia.com, stable@dpdk.org
Subject: [dpdk-stable] [PATCH] net/mlx5: fix E-Switch egress mirror flow validation
Date: Wed, 3 Feb 2021 10:29:17 +0200 [thread overview]
Message-ID: <1612340957-128181-1-git-send-email-jiaweiw@nvidia.com> (raw)
The stored metadata in all registers C were lost in E-Switch egress
mirroring flows due to HW limitation. The register C0 keeps the
source vport index that also was used as one of the flow matcher.
While sample action and jump action (jump to table X) was in the
E-Switch egress flow, the flow in the next table X wasn't hit since
source vport value lost.
The modify actions after sample action should be applied to the packet
on normal path, not to the sampled packet. In order to support this
mlx5 PMD splits the flow into sub flows and jump action is engaged
implicitly, causing malfunction due to registers corruption.
This patch adds the validation the for E-Switch mirroring jump egress
flow, and checks for this hidden jump as well and reject the flows with
modify actions after sampling.
Fixes: 6a951567c159 ("net/mlx5: support E-Switch mirroring and jump in one flow")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
drivers/net/mlx5/mlx5_flow_dv.c | 47 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 8c11ac3..ee1c4f4 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -5081,6 +5081,8 @@ struct mlx5_hlist_entry *
* Pointer to the RSS action.
* @param[out] sample_rss
* Pointer to the RSS action in sample action list.
+ * @param[out] fdb_mirror_limit
+ * Pointer to the FDB mirror limitation flag.
* @param[out] error
* Pointer to error structure.
*
@@ -5095,6 +5097,7 @@ struct mlx5_hlist_entry *
uint64_t item_flags,
const struct rte_flow_action_rss *rss,
const struct rte_flow_action_rss **sample_rss,
+ int *fdb_mirror_limit,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
@@ -5269,6 +5272,9 @@ struct mlx5_hlist_entry *
NULL,
"E-Switch must has a dest "
"port for mirroring");
+ if (!priv->config.hca_attr.reg_c_preserve &&
+ priv->representor_id != -1)
+ *fdb_mirror_limit = 1;
}
/* Continue validation for Xcap actions.*/
if ((sub_action_flags & MLX5_FLOW_XCAP_ACTIONS) &&
@@ -6010,6 +6016,8 @@ struct mlx5_hlist_entry *
uint16_t ether_type = 0;
int actions_n = 0;
uint8_t item_ipv6_proto = 0;
+ int fdb_mirror_limit = 0;
+ int modify_after_mirror = 0;
const struct rte_flow_item *geneve_item = NULL;
const struct rte_flow_item *gre_item = NULL;
const struct rte_flow_item *gtp_item = NULL;
@@ -6429,6 +6437,9 @@ struct mlx5_hlist_entry *
++actions_n;
action_flags |= MLX5_FLOW_ACTION_FLAG |
MLX5_FLOW_ACTION_MARK_EXT;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
+
} else {
action_flags |= MLX5_FLOW_ACTION_FLAG;
++actions_n;
@@ -6448,6 +6459,8 @@ struct mlx5_hlist_entry *
++actions_n;
action_flags |= MLX5_FLOW_ACTION_MARK |
MLX5_FLOW_ACTION_MARK_EXT;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
} else {
action_flags |= MLX5_FLOW_ACTION_MARK;
++actions_n;
@@ -6463,6 +6476,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_META;
rw_act_num += MLX5_ACT_NUM_SET_META;
break;
@@ -6475,6 +6490,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
rw_act_num += MLX5_ACT_NUM_SET_TAG;
break;
@@ -6635,6 +6652,8 @@ struct mlx5_hlist_entry *
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
MLX5_FLOW_ACTION_SET_MAC_SRC :
MLX5_FLOW_ACTION_SET_MAC_DST;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
/*
* Even if the source and destination MAC addresses have
* overlap in the header with 4B alignment, the convert
@@ -6655,6 +6674,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
MLX5_FLOW_ACTION_SET_IPV4_SRC :
@@ -6678,6 +6699,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
MLX5_FLOW_ACTION_SET_IPV6_SRC :
@@ -6695,6 +6718,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
MLX5_FLOW_ACTION_SET_TP_SRC :
@@ -6712,6 +6737,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_TTL ?
MLX5_FLOW_ACTION_SET_TTL :
@@ -6725,6 +6752,12 @@ struct mlx5_hlist_entry *
error);
if (ret)
return ret;
+ if ((action_flags & MLX5_FLOW_ACTION_SAMPLE) &&
+ fdb_mirror_limit)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL,
+ "sample and jump action combination is not supported");
++actions_n;
action_flags |= MLX5_FLOW_ACTION_JUMP;
break;
@@ -6740,6 +6773,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
MLX5_FLOW_ACTION_INC_TCP_SEQ :
@@ -6758,6 +6793,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
MLX5_FLOW_ACTION_INC_TCP_ACK :
@@ -6811,6 +6848,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_IPV4_DSCP;
rw_act_num += MLX5_ACT_NUM_SET_DSCP;
break;
@@ -6825,6 +6864,8 @@ struct mlx5_hlist_entry *
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
+ if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
+ modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_IPV6_DSCP;
rw_act_num += MLX5_ACT_NUM_SET_DSCP;
break;
@@ -6833,6 +6874,7 @@ struct mlx5_hlist_entry *
actions, dev,
attr, item_flags,
rss, &sample_rss,
+ &fdb_mirror_limit,
error);
if (ret < 0)
return ret;
@@ -7031,6 +7073,11 @@ struct mlx5_hlist_entry *
NULL, "too many header modify"
" actions to support");
}
+ /* Eswitch egress mirror and modify flow has limitation on CX5 */
+ if (fdb_mirror_limit && modify_after_mirror)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "sample before modify action is not supported");
return 0;
}
--
1.8.3.1
next reply other threads:[~2021-02-03 8:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 8:29 Jiawei Wang [this message]
2021-02-04 14:41 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1612340957-128181-1-git-send-email-jiaweiw@nvidia.com \
--to=jiaweiw@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).