patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH] doc: fix devarg references in DLB2 guide
       [not found] <1621099654-25535-1-git-send-email-timothy.mcdaniel@intel.com>
@ 2021-05-20 16:14 ` Timothy McDaniel
  2021-05-20 20:43 ` [dpdk-stable] [PATCH v2] " Timothy McDaniel
  1 sibling, 0 replies; 2+ messages in thread
From: Timothy McDaniel @ 2021-05-20 16:14 UTC (permalink / raw)
  Cc: dev, erik.g.carrillo, harry.van.haaren, jerinj, thomas,
	david.marchand, stable, timothy.mcdaniel

Convert to PCI "--allow" devarg format. The documentation
was previously using the "--vdev" form, which cannot be used with the
DLB2 PF PMD.

Fixes: 166378a79412 ("event/dlb2: add documentation and build infrastructure")
Cc: stable@dpdk.org

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>

---
Cc: timothy.mcdaniel@intel.com
---
 doc/guides/eventdevs/dlb2.rst | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
index 3f4bab97a..bce984ca0 100644
--- a/doc/guides/eventdevs/dlb2.rst
+++ b/doc/guides/eventdevs/dlb2.rst
@@ -152,19 +152,19 @@ These pools' sizes are controlled by the nb_events_limit field in struct
 rte_event_dev_config. The load-balanced pool is sized to contain
 nb_events_limit credits, and the directed pool is sized to contain
 nb_events_limit/4 credits. The directed pool size can be overridden with the
-num_dir_credits vdev argument, like so:
+num_dir_credits devargs argument, like so:
 
     .. code-block:: console
 
-       --vdev=dlb2_event,num_dir_credits=<value>
+       --allow ea:00.0,num_dir_credits=<value>
 
 This can be used if the default allocation is too low or too high for the
-specific application needs. The PMD also supports a vdev arg that limits the
+specific application needs. The PMD also supports a devarg that limits the
 max_num_events reported by rte_event_dev_info_get():
 
     .. code-block:: console
 
-       --vdev=dlb2_event,max_num_events=<value>
+       --allow ea:00.0,max_num_events=<value>
 
 By default, max_num_events is reported as the total available load-balanced
 credits. If multiple DLB-based applications are being used, it may be desirable
@@ -315,11 +315,11 @@ buffer space (e.g. if not all queues are used, or aren't used for atomic
 scheduling).
 
 The PMD provides a dev arg to override the default per-queue allocation. To
-increase a vdev's per-queue atomic-inflight allocation to (for example) 64:
+increase per-queue atomic-inflight allocation to (for example) 64:
 
     .. code-block:: console
 
-       --vdev=dlb2_event,atm_inflights=64
+       --allow ea:00.0,atm_inflights=64
 
 QID Depth Threshold
 ~~~~~~~~~~~~~~~~~~~
@@ -342,9 +342,9 @@ shown below.
 
     .. code-block:: console
 
-       --vdev=dlb2_event,qid_depth_thresh=all:<threshold_value>
-       --vdev=dlb2_event,qid_depth_thresh=qidA-qidB:<threshold_value>
-       --vdev=dlb2_event,qid_depth_thresh=qid:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=all:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=qidA-qidB:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=qid:<threshold_value>
 
 Class of service
 ~~~~~~~~~~~~~~~~
@@ -366,10 +366,10 @@ Class of service can be specified in the devargs, as follows
 
     .. code-block:: console
 
-       --vdev=dlb2_event,cos=<0..4>
+       --allow ea:00.0,cos=<0..4>
 
 Use X86 Vector Instructions
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 DLB supports using x86 vector instructions to optimize the data path.
 
@@ -379,4 +379,4 @@ follows
 
     .. code-block:: console
 
-      --allow ea:00.0,vector_opts_enabled=<y/Y>
+       --allow ea:00.0,vector_opts_enabled=<y/Y>
-- 
2.23.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

* [dpdk-stable] [PATCH v2] doc: fix devarg references in DLB2 guide
       [not found] <1621099654-25535-1-git-send-email-timothy.mcdaniel@intel.com>
  2021-05-20 16:14 ` [dpdk-stable] [PATCH] doc: fix devarg references in DLB2 guide Timothy McDaniel
@ 2021-05-20 20:43 ` Timothy McDaniel
  1 sibling, 0 replies; 2+ messages in thread
From: Timothy McDaniel @ 2021-05-20 20:43 UTC (permalink / raw)
  Cc: dev, erik.g.carrillo, harry.van.haaren, jerinj, thomas,
	david.marchand, stable, timothy.mcdaniel

Convert to PCI "--allow" devarg format. The documentation
was previously using the "--vdev" form, which cannot be used with the
DLB2 PF PMD.

Fixes: 166378a79412 ("event/dlb2: add documentation and build infrastructure")
Cc: stable@dpdk.org

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>

---
Cc: timothy.mcdaniel@intel.com
---
 doc/guides/eventdevs/dlb2.rst | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
index acdb00587..bce984ca0 100644
--- a/doc/guides/eventdevs/dlb2.rst
+++ b/doc/guides/eventdevs/dlb2.rst
@@ -152,19 +152,19 @@ These pools' sizes are controlled by the nb_events_limit field in struct
 rte_event_dev_config. The load-balanced pool is sized to contain
 nb_events_limit credits, and the directed pool is sized to contain
 nb_events_limit/4 credits. The directed pool size can be overridden with the
-num_dir_credits vdev argument, like so:
+num_dir_credits devargs argument, like so:
 
     .. code-block:: console
 
-       --vdev=dlb2_event,num_dir_credits=<value>
+       --allow ea:00.0,num_dir_credits=<value>
 
 This can be used if the default allocation is too low or too high for the
-specific application needs. The PMD also supports a vdev arg that limits the
+specific application needs. The PMD also supports a devarg that limits the
 max_num_events reported by rte_event_dev_info_get():
 
     .. code-block:: console
 
-       --vdev=dlb2_event,max_num_events=<value>
+       --allow ea:00.0,max_num_events=<value>
 
 By default, max_num_events is reported as the total available load-balanced
 credits. If multiple DLB-based applications are being used, it may be desirable
@@ -315,11 +315,11 @@ buffer space (e.g. if not all queues are used, or aren't used for atomic
 scheduling).
 
 The PMD provides a dev arg to override the default per-queue allocation. To
-increase a vdev's per-queue atomic-inflight allocation to (for example) 64:
+increase per-queue atomic-inflight allocation to (for example) 64:
 
     .. code-block:: console
 
-       --vdev=dlb2_event,atm_inflights=64
+       --allow ea:00.0,atm_inflights=64
 
 QID Depth Threshold
 ~~~~~~~~~~~~~~~~~~~
@@ -342,9 +342,9 @@ shown below.
 
     .. code-block:: console
 
-       --vdev=dlb2_event,qid_depth_thresh=all:<threshold_value>
-       --vdev=dlb2_event,qid_depth_thresh=qidA-qidB:<threshold_value>
-       --vdev=dlb2_event,qid_depth_thresh=qid:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=all:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=qidA-qidB:<threshold_value>
+       --allow ea:00.0,qid_depth_thresh=qid:<threshold_value>
 
 Class of service
 ~~~~~~~~~~~~~~~~
@@ -366,7 +366,7 @@ Class of service can be specified in the devargs, as follows
 
     .. code-block:: console
 
-       --vdev=dlb2_event,cos=<0..4>
+       --allow ea:00.0,cos=<0..4>
 
 Use X86 Vector Instructions
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -379,4 +379,4 @@ follows
 
     .. code-block:: console
 
-      --allow ea:00.0,vector_opts_enabled=<y/Y>
+       --allow ea:00.0,vector_opts_enabled=<y/Y>
-- 
2.23.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-05-20 20:45 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1621099654-25535-1-git-send-email-timothy.mcdaniel@intel.com>
2021-05-20 16:14 ` [dpdk-stable] [PATCH] doc: fix devarg references in DLB2 guide Timothy McDaniel
2021-05-20 20:43 ` [dpdk-stable] [PATCH v2] " Timothy McDaniel

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git