From: Luca Boccassi <bluca@debian.org>
To: Qi Zhang <qi.z.zhang@intel.com>
Cc: Anand Rawat <anand.rawat@intel.com>,
Beilei Xing <beilei.xing@intel.com>,
dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/i40e: fix send admin queue command before init' has been queued to LTS release 16.11.9
Date: Mon, 15 Oct 2018 12:51:21 +0100 [thread overview]
Message-ID: <20181015115144.27626-1-bluca@debian.org> (raw)
In-Reply-To: <20181003162121.16364-1-bluca@debian.org>
Hi,
FYI, your patch has been queued to LTS release 16.11.9
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 10/17/18. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the patch applied
to the branch. If the code is different (ie: not only metadata diffs), due for example to
a change in context or macro names, please double check it.
Thanks.
Luca Boccassi
---
>From 994a8f3dfff72bfd0f83fcd6529997d74b84afd7 Mon Sep 17 00:00:00 2001
From: Qi Zhang <qi.z.zhang@intel.com>
Date: Fri, 28 Sep 2018 11:20:01 +0800
Subject: [PATCH] net/i40e: fix send admin queue command before init
[ upstream commit 0a1b657838c2c0546ebc6469ed2840c5a9a796f4 ]
We should not issue Admin Queue command before Admin Queue is initialized.
But this happened in i40e_hw_init and i40e_filter_input_set_init.
The patch fixes the issue by proper reordering.
Fixes: b6a0ec418274 ("i40e: use AQ for Rx control register read/write")
Reported-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 3061296340..2ce0e70258 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1081,9 +1081,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
/* Make sure all is clean before doing PF reset */
i40e_clear_hw(hw);
- /* Initialize the hardware */
- i40e_hw_init(dev);
-
/* Reset here to make sure all is clean for each PF */
ret = i40e_pf_reset(hw);
if (ret) {
@@ -1098,20 +1095,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
return ret;
}
- i40e_config_automask(pf);
-
- /*
- * To work around the NVM issue, initialize registers
- * for flexible payload and packet type of QinQ by
- * software. It should be removed once issues are fixed
- * in NVM.
- */
- if (!pf->support_multi_driver)
- i40e_GLQF_reg_init(hw);
-
- /* Initialize the input set for filters (hash and fd) to default value */
- i40e_filter_input_set_init(pf);
-
/* Initialize the parameters for adminq */
i40e_init_adminq_parameter(hw);
ret = i40e_init_adminq(hw);
@@ -1126,6 +1109,23 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
((hw->nvm.version >> 4) & 0xff),
(hw->nvm.version & 0xf), hw->nvm.eetrack);
+ /* Initialize the hardware */
+ i40e_hw_init(dev);
+
+ i40e_config_automask(pf);
+
+ /*
+ * To work around the NVM issue, initialize registers
+ * for flexible payload and packet type of QinQ by
+ * software. It should be removed once issues are fixed
+ * in NVM.
+ */
+ if (!pf->support_multi_driver)
+ i40e_GLQF_reg_init(hw);
+
+ /* Initialize the input set for filters (hash and fd) to default value */
+ i40e_filter_input_set_init(pf);
+
/* Need the special FW version to support floating VEB */
config_floating_veb(dev);
/* Clear PXE mode */
--
2.19.1
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2018-10-15 12:48:34.650047507 +0100
+++ 0001-net-i40e-fix-send-admin-queue-command-before-init.patch 2018-10-15 12:48:34.493096018 +0100
@@ -1,28 +1,29 @@
-From 0a1b657838c2c0546ebc6469ed2840c5a9a796f4 Mon Sep 17 00:00:00 2001
+From 994a8f3dfff72bfd0f83fcd6529997d74b84afd7 Mon Sep 17 00:00:00 2001
From: Qi Zhang <qi.z.zhang@intel.com>
Date: Fri, 28 Sep 2018 11:20:01 +0800
Subject: [PATCH] net/i40e: fix send admin queue command before init
+[ upstream commit 0a1b657838c2c0546ebc6469ed2840c5a9a796f4 ]
+
We should not issue Admin Queue command before Admin Queue is initialized.
But this happened in i40e_hw_init and i40e_filter_input_set_init.
The patch fixes the issue by proper reordering.
Fixes: b6a0ec418274 ("i40e: use AQ for Rx control register read/write")
-Cc: stable@dpdk.org
Reported-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
---
- drivers/net/i40e/i40e_ethdev.c | 36 +++++++++++++++++-----------------
- 1 file changed, 18 insertions(+), 18 deletions(-)
+ drivers/net/i40e/i40e_ethdev.c | 34 +++++++++++++++++-----------------
+ 1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
-index de25de6500..9225333d05 100644
+index 3061296340..2ce0e70258 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
-@@ -1332,9 +1332,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
+@@ -1081,9 +1081,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
/* Make sure all is clean before doing PF reset */
i40e_clear_hw(hw);
@@ -32,18 +33,17 @@
/* Reset here to make sure all is clean for each PF */
ret = i40e_pf_reset(hw);
if (ret) {
-@@ -1349,21 +1346,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
+@@ -1098,20 +1095,6 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
return ret;
}
- i40e_config_automask(pf);
-
-- i40e_set_default_pctype_table(dev);
--
- /*
- * To work around the NVM issue, initialize registers
-- * for packet type of QinQ by software.
-- * It should be removed once issues are fixed in NVM.
+- * for flexible payload and packet type of QinQ by
+- * software. It should be removed once issues are fixed
+- * in NVM.
- */
- if (!pf->support_multi_driver)
- i40e_GLQF_reg_init(hw);
@@ -54,7 +54,7 @@
/* Initialize the parameters for adminq */
i40e_init_adminq_parameter(hw);
ret = i40e_init_adminq(hw);
-@@ -1378,6 +1360,24 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params __rte_unused)
+@@ -1126,6 +1109,23 @@ eth_i40e_dev_init(struct rte_eth_dev *dev)
((hw->nvm.version >> 4) & 0xff),
(hw->nvm.version & 0xf), hw->nvm.eetrack);
@@ -63,12 +63,11 @@
+
+ i40e_config_automask(pf);
+
-+ i40e_set_default_pctype_table(dev);
-+
+ /*
+ * To work around the NVM issue, initialize registers
-+ * for packet type of QinQ by software.
-+ * It should be removed once issues are fixed in NVM.
++ * for flexible payload and packet type of QinQ by
++ * software. It should be removed once issues are fixed
++ * in NVM.
+ */
+ if (!pf->support_multi_driver)
+ i40e_GLQF_reg_init(hw);
@@ -76,9 +75,9 @@
+ /* Initialize the input set for filters (hash and fd) to default value */
+ i40e_filter_input_set_init(pf);
+
- /* initialise the L3_MAP register */
- if (!pf->support_multi_driver) {
- ret = i40e_aq_debug_write_global_register(hw,
+ /* Need the special FW version to support floating VEB */
+ config_floating_veb(dev);
+ /* Clear PXE mode */
--
2.19.1
next prev parent reply other threads:[~2018-10-15 11:51 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 8:43 [dpdk-stable] patch 'net/bonding: support matching QinQ ethertype' " Luca Boccassi
2018-09-27 8:43 ` [dpdk-stable] patch 'net/nfp: fix live MAC changes not supported' " Luca Boccassi
2018-09-27 8:43 ` [dpdk-stable] patch 'doc: fix wrong usage of bind command' " Luca Boccassi
2018-09-27 8:43 ` [dpdk-stable] patch 'examples/vhost: remove unnecessary constant' " Luca Boccassi
2018-09-27 8:44 ` [dpdk-stable] patch 'vhost-user: drop connection on message handling failures' " Luca Boccassi
2018-09-27 8:44 ` [dpdk-stable] patch 'net/bonding: use evenly distributed default RSS RETA' " Luca Boccassi
2018-09-27 8:44 ` [dpdk-stable] patch 'net/bonding: do not ignore RSS key on device config' " Luca Boccassi
2018-09-27 8:44 ` [dpdk-stable] patch 'app/testpmd: optimize mbuf pool allocation' " Luca Boccassi
2018-10-03 16:21 ` [dpdk-stable] patch 'acl: forbid rule with priority zero' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'net/nfp: fix mbuf flags with checksum good' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'ethdev: fix doxygen comment to be with structure' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'net/virtio: add missing supported features' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'vhost: fix corner case for enqueue operation' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'net/bonding: stop and deactivate slaves on stop' " Luca Boccassi
2018-10-03 16:52 ` [dpdk-stable] patch 'test/crypto: fix number of queue pairs' " Luca Boccassi
2018-10-15 11:51 ` Luca Boccassi [this message]
2018-10-15 11:51 ` [dpdk-stable] patch 'net/i40e/base: fix partition id calculation for X722' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/i40e/base: properly clean resources' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/i40e/base: gracefully clean the " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/i40e/base: correct global reset timeout calculation' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/ixgbe: wait longer for link after fiber MAC setup' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/enic: do not use non-standard integer types' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/enic: set Rx VLAN offload flag for non-stripped packets' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/nfp: fix RSS' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnx2x: fix logging to include device name' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnx2x: fix to disable further interrupts' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnx2x: fix call to link handling periodic function' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnx2x: fix to add PHY lock' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnxt: fix uninitialized pointer access in Tx' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnxt: set MAC filtering as outer for non tunnel frames' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnxt: set a VNIC as default only once' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnxt: remove excess log messages' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/bnxt: reduce polling interval for valid bit' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'app/testpmd: fix csum parse-tunnel command invocation' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'app/testpmd: fix displaying RSS hash functions' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'doc: add VFIO in ENA guide' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'app/testpmd: fix duplicate exit' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'net/e1000: do not error out if Rx drop enable is set' " Luca Boccassi
2018-10-15 11:51 ` [dpdk-stable] patch 'eal: use correct data type for bitmap slab operations' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/e1000: do not error out if Rx drop enable is set' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'eal: use correct data type for bitmap slab operations' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'vhost: fix payload size of reply' " Luca Boccassi
2018-10-29 13:12 ` Ilya Maximets
2018-10-29 16:32 ` Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'kvargs: fix processing a null list' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'test/hash: fix bucket size in perf test' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'hash: fix key store element alignment' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'kni: fix build on Linux 4.19' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'kni: fix kernel FIFO synchronization' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'test/kni: check module dependency' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'hash: remove unnecessary pause' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'kni: fix build on Linux < 3.14' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/i40e: keep promiscuous on if allmulticast is enabled' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/i40e: enable loopback function for X722 MAC' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/i40e: update Tx offload mask' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/ixgbe: " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'net/ena: fix passing RSS hash to mbuf' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'doc: fix typo in testpmd guide' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'ip_frag: fix overflow in key comparison' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'eal/linux: fix memory leak of logid' " Luca Boccassi
2018-10-29 12:53 ` [dpdk-stable] patch 'fix global variable issues' " Luca Boccassi
2018-11-08 18:00 ` [dpdk-stable] patch 'net/virtio: register/unregister intr handler on start/stop' " Luca Boccassi
2018-11-08 18:00 ` [dpdk-stable] patch 'eal/linux: handle UIO read failure in interrupt handler' " Luca Boccassi
2018-11-08 18:00 ` [dpdk-stable] patch 'mk: disable gcc AVX512F support' " Luca Boccassi
2018-11-09 6:52 ` Christian Ehrhardt
2018-11-09 10:48 ` Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'eal: fix build with gcc 9.0' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'net/vhost: fix parameters string' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'net/virtio-user: do not reset owner when driver resets' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'net: fix build with pedantic' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'net/igb: update Tx offload mask' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'ip_frag: check fragment length of incoming packet' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'ip_frag: use key length for key comparison' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'bus/pci: compare kernel driver instead of interrupt handler' " Luca Boccassi
2018-11-12 18:35 ` Luca Boccassi
2018-11-14 10:02 ` Alejandro Lucero
2018-11-14 11:07 ` Luca Boccassi
2018-11-14 11:36 ` Alejandro Lucero
2018-11-15 17:34 ` Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'bus/pci: fix config r/w access' " Luca Boccassi
2018-11-08 18:18 ` Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'test/hash: fix build' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'igb_uio: issue FLR during open and release of device file' " Luca Boccassi
2018-11-08 18:16 ` Luca Boccassi
2018-11-09 9:32 ` Shijith Thotton
2018-11-09 10:43 ` Luca Boccassi
2018-11-09 14:26 ` [dpdk-stable] patch 'igb_uio: remove device reset in open' " Luca Boccassi
2018-11-09 14:26 ` [dpdk-stable] patch 'igb_uio: remove device reset in release' " Luca Boccassi
2018-11-08 18:01 ` [dpdk-stable] patch 'igb_uio: fix unexpected removal for hot-unplug' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'eal: introduce rte version of fls' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'eal: fix build' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'pci: fix parsing of address without function number' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/e1000/base: fix uninitialized variable' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/mlx5: fix build on PPC64' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/thunderx: fix Tx desc corruption in scatter-gather mode' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/virtio-user: fix typo in error message' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/virtio: fix unchecked return value' " Luca Boccassi
2018-11-19 12:48 ` Tiwei Bie
2018-11-19 12:52 ` Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'vhost: remove unneeded null pointer check' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/bnx2x: fix VF link state update' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/bonding: fix crash when stopping mode 4 port' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'app/testpmd: fix L4 length for UDP checksum' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'ethdev: fix invalid configuration after failure' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/ixgbevf: fix link state' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'test/reorder: fix out of bound access' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/i40e: fix X710 Rx after reading some registers' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'net/ixgbe: fix maximum wait time in comment' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'examples/ipv4_multicast: fix leak of cloned packets' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'usertools: check for lspci dependency' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'doc: fix NUMA library name in Linux guide' " Luca Boccassi
2018-11-19 12:25 ` [dpdk-stable] patch 'doc: fix formatting in IP reassembly app " Luca Boccassi
2018-11-26 12:49 ` [dpdk-stable] patch 'eal: fix build with -O1' " Luca Boccassi
2018-11-26 12:49 ` [dpdk-stable] patch 'kni: fix possible uninitialized variable' " Luca Boccassi
2018-11-26 12:49 ` [dpdk-stable] patch 'config: enable more than 128 cores for arm64' " Luca Boccassi
2018-11-26 12:49 ` [dpdk-stable] patch 'net/ixgbe: fix TDH register write' " Luca Boccassi
2018-11-26 12:49 ` [dpdk-stable] patch 'bus/pci: fix allocation of device path' " Luca Boccassi
2018-11-28 10:11 ` [dpdk-stable] patch 'fix dpdk.org URLs' " Luca Boccassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181015115144.27626-1-bluca@debian.org \
--to=bluca@debian.org \
--cc=anand.rawat@intel.com \
--cc=beilei.xing@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).