From: Kevin Traynor <ktraynor@redhat.com>
To: David Marchand <david.marchand@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>, dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'log: add missing experimental tag' has been queued to LTS release 18.11.1
Date: Fri, 4 Jan 2019 13:23:45 +0000 [thread overview]
Message-ID: <20190104132455.15170-3-ktraynor@redhat.com> (raw)
In-Reply-To: <20190104132455.15170-1-ktraynor@redhat.com>
Hi,
FYI, your patch has been queued to LTS release 18.11.1
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 01/11/19. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Thanks.
Kevin Traynor
---
>From a4bca176eea3a5fc71e2e42094c806037f84c15f Mon Sep 17 00:00:00 2001
From: David Marchand <david.marchand@redhat.com>
Date: Tue, 4 Dec 2018 09:28:31 +0100
Subject: [PATCH] log: add missing experimental tag
[ upstream commit a8499f65a1d116ffb25db48abbe3bbaefa7cf120 ]
When rte_log_register_type_and_pick_level() has been introduced, it has
been correctly added to the EXPERIMENTAL section of the eal map and the
symbol itself has been marked at its definition.
However, the declaration of this symbol in rte_log.h is missing the
__rte_experimental tag.
Because of this, a user can try to call this symbol without being aware
this is an experimental api (neither compilation nor link warning).
Fixes: b22e77c02620 ("eal: register log type and pick level from args")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
---
lib/librte_eal/common/include/rte_log.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/lib/librte_eal/common/include/rte_log.h b/lib/librte_eal/common/include/rte_log.h
index 2f789cb90..f334efce4 100644
--- a/lib/librte_eal/common/include/rte_log.h
+++ b/lib/librte_eal/common/include/rte_log.h
@@ -25,4 +25,5 @@ extern "C" {
#include <rte_common.h>
#include <rte_config.h>
+#include <rte_compat.h>
struct rte_log_dynamic_type;
@@ -227,4 +228,5 @@ int rte_log_register(const char *name);
* - <0: rte_log_register() error value
*/
+__rte_experimental
int rte_log_register_type_and_pick_level(const char *name, uint32_t level_def);
--
2.19.0
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2019-01-04 13:23:07.534676260 +0000
+++ 0003-log-add-missing-experimental-tag.patch 2019-01-04 13:23:07.000000000 +0000
@@ -1,8 +1,10 @@
-From a8499f65a1d116ffb25db48abbe3bbaefa7cf120 Mon Sep 17 00:00:00 2001
+From a4bca176eea3a5fc71e2e42094c806037f84c15f Mon Sep 17 00:00:00 2001
From: David Marchand <david.marchand@redhat.com>
Date: Tue, 4 Dec 2018 09:28:31 +0100
Subject: [PATCH] log: add missing experimental tag
+[ upstream commit a8499f65a1d116ffb25db48abbe3bbaefa7cf120 ]
+
When rte_log_register_type_and_pick_level() has been introduced, it has
been correctly added to the EXPERIMENTAL section of the eal map and the
symbol itself has been marked at its definition.
@@ -13,7 +15,6 @@
this is an experimental api (neither compilation nor link warning).
Fixes: b22e77c02620 ("eal: register log type and pick level from args")
-Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
next prev parent reply other threads:[~2019-01-04 13:26 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-04 13:23 [dpdk-stable] patch 'config: enable C11 memory model for armv8 with meson' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'mk: do not install meson.build in usertools' " Kevin Traynor
2019-01-04 13:23 ` Kevin Traynor [this message]
2019-01-10 9:52 ` [dpdk-stable] patch 'log: add missing experimental tag' " David Marchand
2019-01-10 10:28 ` Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'bus/vmbus: fix race in subchannel creation' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'net/netvsc: enable SR-IOV' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'net/netvsc: disable multi-queue on older servers' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'bus/dpaa: do nothing if bus not present' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'doc: fix garbage text in generated HTML guides' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'eal: clean up unused files on initialization' " Kevin Traynor
2019-01-08 16:53 ` Burakov, Anatoly
2019-01-08 18:09 ` Kevin Traynor
2019-01-10 11:38 ` Burakov, Anatoly
2019-01-04 13:23 ` [dpdk-stable] patch 'gro: fix overflow of payload length calculation' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'eventdev: fix error log in eth Rx adapter' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'eventdev: remove redundant timer adapter function prototypes' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'app/eventdev: detect deadlock for timer event producer' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'eventdev: fix xstats documentation typo' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'eventdev: fix eth Tx adapter queue count checks' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'compressdev: fix structure comment' " Kevin Traynor
2019-01-04 13:23 ` [dpdk-stable] patch 'bb/turbo_sw: fix dynamic linking' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'crypto/qat: fix block size error handling' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'crypto/qat: fix message for CCM when setting unused counter' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'crypto/qat: fix message for NULL algo " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'common/qat: remove check of valid firmware response' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'compress/qat: fix return on building request error' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'compress/qat: fix dequeue error counter' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'timer: fix race condition' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'ip_frag: fix IPv6 when MTU sizes not aligned to 8 bytes' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'eal: fix missing newline in a log' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'eal: fix detection of duplicate option register' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'eal: fix leak on multi-process request error' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'memzone: fix unlock on initialization failure' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'malloc: fix finding maximum contiguous IOVA size' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'malloc: notify primary process about hotplug in secondary' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'malloc: fix duplicate mem event notification' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'malloc: make alignment requirements more stringent' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'mem: fix segment fd API error code for external segment' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'mem: check for memfd support in segment fd API' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'doc: remove note on memory mode limitation in multi-process' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'test/mem: add external mem autotest to meson' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'test/fbarray: add " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'eal: close multi-process socket during cleanup' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'hash: fix return of bulk lookup' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'hash: fix out-of-bound write while freeing key slot' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'devtools: fix return of forbidden addition checks' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'malloc: fix deadlock when reading stats' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/i40e: clear VF reset flags after reset' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/i40e: fix statistics inconsistency' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/netvsc: fix transmit descriptor pool cleanup' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/netvsc: fix probe when VF not found' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'vhost: fix race condition when adding fd in the fdset' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ifc: store only registered device instance' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: add reset reason in Rx error' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: skip packet with wrong request id' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: destroy queues if start failed' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: do not reconfigure queues on reset' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: add supported RSS offloads types' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: fix invalid reference to variable in union' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: fix cleanup for out of order packets' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/ena: update completion queue after cleanup' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/cxgbe: fix overlapping regions in TID table' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/cxgbe: skip parsing match items with no spec' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/i40e: fix config name in comment' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/mlx5: fix Multi-Packet RQ mempool free' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net: fix underflow for checksum of invalid IPv4 packets' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/tap: add buffer overflow checks before checksum' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/vhost: fix double free of MAC address' " Kevin Traynor
2019-01-07 0:04 ` Hideyuki Yamashita
2019-01-07 10:23 ` Kevin Traynor
2019-01-09 7:39 ` Hideyuki Yamashita
2019-01-09 11:04 ` Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'vhost: enforce avail index and desc read ordering' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'vhost: enforce desc flags and content " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/af_packet: fix setting MTU decrements sockaddr twice' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/tap: fix possible uninitialized variable access' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/avf/base: fix comment referencing internal data' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'net/sfc: pass HW Tx queue index on creation' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'telemetry: fix using ports of different types' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'sched: fix memory leak on init failure' " Kevin Traynor
2019-01-04 13:24 ` [dpdk-stable] patch 'app/testpmd: expand RED queue thresholds to 64 bits' " Kevin Traynor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190104132455.15170-3-ktraynor@redhat.com \
--to=ktraynor@redhat.com \
--cc=david.marchand@redhat.com \
--cc=nhorman@tuxdriver.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).