[dpdk-stable] patch 'doc: fix typos in testpmd user guide' has been queued to LTS release 18.11.2

[Kevin Traynor <ktraynor@redhat.com>]

Hi,

FYI, your patch has been queued to LTS release 18.11.2

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/01/19. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches can be viewed on the 18.11 branch at:
	https://github.com/kevintraynor/dpdk-stable-queue.git

Thanks.

Kevin Traynor

---
From 7230fafb7052bcb604d1be07b6400e32c01c45c1 Mon Sep 17 00:00:00 2001
From: Dekel Peled <dekelp@mellanox.com>
Date: Sun, 31 Mar 2019 13:20:55 +0300
Subject: [PATCH] doc: fix typos in testpmd user guide

[ upstream commit 205d9d3cf8a8d6fa7a79b399315c61df859dd01d ]

Correct typing mistakes in several places.
1) "Those command will" ==> "These commands will"
2) icmp6_nd_opt_sla_eth ==> icmp6_nd_opt_tla_eth
   (change 's' to 't' for 'target' where applicable)

Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 98be85219..d4e3fd8a5 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1584,5 +1584,5 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
  eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action vxlan_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
@@ -1599,5 +1599,5 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
         ip-dst (ip-dst) vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action nvgre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
@@ -1642,5 +1642,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
         eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
@@ -1655,5 +1655,5 @@ Configure the outer layer to decapsulate MPLSoGRE packet::
  set mplsogre_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsogre_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
@@ -1672,5 +1672,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
         vlan-tci (vlan-tci) eth-src (eth-src) eth-dst (eth-dst)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_encap will use the last configuration set.
 To have a different encapsulation header, one of those commands must be called
@@ -1685,5 +1685,5 @@ Configure the outer layer to decapsulate MPLSoUDP packet::
  set mplsoudp_decap-with-vlan ip-version (ipv4|ipv6)
 
-Those command will set an internal configuration inside testpmd, any following
+These commands will set an internal configuration inside testpmd, any following
 flow rule using the action mplsoudp_decap will use the last configuration set.
 To have a different decapsulation header, one of those commands must be called
@@ -3706,5 +3706,5 @@ This section lists supported pattern items and their attributes, if any.
   - ``sla {MAC-48}``: source Ethernet LLA.
 
-- ``icmp6_nd_opt_sla_eth``: match ICMPv6 neighbor discovery target Ethernet
+- ``icmp6_nd_opt_tla_eth``: match ICMPv6 neighbor discovery target Ethernet
   link-layer address option.
 
-- 
2.20.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2019-04-25 16:37:49.329358830 +0100
+++ 0060-doc-fix-typos-in-testpmd-user-guide.patch	2019-04-25 16:37:46.784294057 +0100
@@ -1 +1 @@
-From 205d9d3cf8a8d6fa7a79b399315c61df859dd01d Mon Sep 17 00:00:00 2001
+From 7230fafb7052bcb604d1be07b6400e32c01c45c1 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 205d9d3cf8a8d6fa7a79b399315c61df859dd01d ]
+
@@ -12 +13,0 @@
-Cc: stable@dpdk.org
@@ -21 +22 @@
-index 06c8b2ac0..bcf1449a2 100644
+index 98be85219..d4e3fd8a5 100644
@@ -24,2 +25,2 @@
-@@ -1624,5 +1624,5 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
-  ip-dst (ip-dst) eth-src (eth-src) eth-dst (eth-dst)
+@@ -1584,5 +1584,5 @@ Configure the outer layer to encapsulate a packet inside a VXLAN tunnel::
+  eth-src (eth-src) eth-dst (eth-dst)
@@ -31 +32 @@
-@@ -1639,5 +1639,5 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
+@@ -1599,5 +1599,5 @@ Configure the outer layer to encapsulate a packet inside a NVGRE tunnel::
@@ -38 +39 @@
-@@ -1682,5 +1682,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
+@@ -1642,5 +1642,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoGRE tunnel::
@@ -45 +46 @@
-@@ -1695,5 +1695,5 @@ Configure the outer layer to decapsulate MPLSoGRE packet::
+@@ -1655,5 +1655,5 @@ Configure the outer layer to decapsulate MPLSoGRE packet::
@@ -52 +53 @@
-@@ -1712,5 +1712,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
+@@ -1672,5 +1672,5 @@ Configure the outer layer to encapsulate a packet inside a MPLSoUDP tunnel::
@@ -59 +60 @@
-@@ -1725,5 +1725,5 @@ Configure the outer layer to decapsulate MPLSoUDP packet::
+@@ -1685,5 +1685,5 @@ Configure the outer layer to decapsulate MPLSoUDP packet::
@@ -66 +67 @@
-@@ -3746,5 +3746,5 @@ This section lists supported pattern items and their attributes, if any.
+@@ -3706,5 +3706,5 @@ This section lists supported pattern items and their attributes, if any.