patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Shweta Choudaha <shweta.choudaha@gmail.com>
To: dev@dpdk.org
Cc: wenzhuo.lu@intel.com, shweta.choudaha@att.com, stable@dpdk.org
Subject: [dpdk-stable] [PATCH v2 1/1] net/e1000: set/clear GO_LINKD bit only if PHY reset is not blocked
Date: Thu, 16 May 2019 23:03:31 +0100
Message-ID: <20190516220331.91984-2-shweta.choudaha@gmail.com> (raw)
In-Reply-To: <20190516220331.91984-1-shweta.choudaha@gmail.com>

From: Shweta Choudaha <shweta.choudaha@att.com>

When PHY reset is blocked as is the case when BMC is connected via NC-SI
do not set GO_LINKD bit in PHY power management register in dev_stop as
this will disconnect the PHY. Also, in dev_close clear the GO_LINKD
bit only if PHY reset is not blocked

Fixes: 3af34dec0b41 ("igb: force phy power up/down")
CC: stable@dpdk.org

Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
---
 drivers/net/e1000/igb_ethdev.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index d3a8f5bf4..4d4065d05 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -1515,8 +1515,9 @@ eth_igb_stop(struct rte_eth_dev *dev)
 	igb_pf_reset_hw(hw);
 	E1000_WRITE_REG(hw, E1000_WUC, 0);
 
-	/* Set bit for Go Link disconnect */
-	if (hw->mac.type >= e1000_82580) {
+	/* Set bit for Go Link disconnect if PHY reset is not blocked */
+	if (hw->mac.type >= e1000_82580 &&
+	    (e1000_check_reset_block(hw) != E1000_BLK_PHY_RESET)) {
 		uint32_t phpm_reg;
 
 		phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
@@ -1590,8 +1591,9 @@ eth_igb_close(struct rte_eth_dev *dev)
 	igb_release_manageability(hw);
 	igb_hw_control_release(hw);
 
-	/* Clear bit for Go Link disconnect */
-	if (hw->mac.type >= e1000_82580) {
+	/* Clear bit for Go Link disconnect if PHY reset is not blocked */
+	if (hw->mac.type >= e1000_82580 &&
+	    (e1000_check_reset_block(hw) != E1000_BLK_PHY_RESET)) {
 		uint32_t phpm_reg;
 
 		phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
-- 
2.11.0


  parent reply	other threads:[~2019-05-16 22:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190516214535.90650-1-shweta.choudaha@gmail.com>
2019-05-16 21:45 ` [dpdk-stable] [PATCH " Shweta Choudaha
     [not found]   ` <20190516220331.91984-1-shweta.choudaha@gmail.com>
2019-05-16 22:03     ` Shweta Choudaha [this message]
2019-10-28  6:40       ` [dpdk-stable] [dpdk-dev] [PATCH v2 " Ye Xiaolong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190516220331.91984-2-shweta.choudaha@gmail.com \
    --to=shweta.choudaha@gmail.com \
    --cc=dev@dpdk.org \
    --cc=shweta.choudaha@att.com \
    --cc=stable@dpdk.org \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git