From: Kevin Traynor <ktraynor@redhat.com>
To: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>,
Ajit Khaparde <ajit.khaparde@broadcom.com>,
dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/bnxt: fix setting primary MAC address' has been queued to LTS release 18.11.3
Date: Wed, 28 Aug 2019 14:42:16 +0100 [thread overview]
Message-ID: <20190828134234.20547-40-ktraynor@redhat.com> (raw)
In-Reply-To: <20190828134234.20547-1-ktraynor@redhat.com>
Hi,
FYI, your patch has been queued to LTS release 18.11.3
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 09/04/19. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue
This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/e8ab24b4e0a8c137a5376bb75ca823fdcce92ab5
Thanks.
Kevin Traynor
---
From e8ab24b4e0a8c137a5376bb75ca823fdcce92ab5 Mon Sep 17 00:00:00 2001
From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Date: Thu, 18 Jul 2019 09:05:59 +0530
Subject: [PATCH] net/bnxt: fix setting primary MAC address
[ upstream commit 68f589f2c728e7d893b2eacd86aca09b5546d690 ]
1. Default filter is tied to VNIC 0 at index 0. After finding the filter
with mac_index 0 and set the new MAC address, looping through
remaining filters is unnecessary.
2. Added a check for NULL MAC address.
3. bnxt_hwrm_set_l2_filter() clears the existing filter configuration
first before applying new filter settings. Hence there is no need to
invoke bnxt_hwrm_clear_l2_filter() explicitly in
bnxt_set_default_mac_addr_op().
Fixes: d69851df12b2 ("net/bnxt: support multicast filter and set MAC addr")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 20bca23c7..286f7cb8b 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1542,5 +1542,6 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
return -EPERM;
- memcpy(bp->mac_addr, addr, sizeof(bp->mac_addr));
+ if (is_zero_ether_addr(addr))
+ return -EINVAL;
STAILQ_FOREACH(filter, &vnic->filter, next) {
@@ -1548,7 +1549,5 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
if (filter->mac_index != 0)
continue;
- rc = bnxt_hwrm_clear_l2_filter(bp, filter);
- if (rc)
- return rc;
+
memcpy(filter->l2_addr, bp->mac_addr, ETHER_ADDR_LEN);
memset(filter->l2_addr_mask, 0xff, ETHER_ADDR_LEN);
@@ -1557,9 +1556,12 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
+
rc = bnxt_hwrm_set_l2_filter(bp, vnic->fw_vnic_id, filter);
if (rc)
return rc;
- filter->mac_index = 0;
+
+ memcpy(bp->mac_addr, addr, ETHER_ADDR_LEN);
PMD_DRV_LOG(DEBUG, "Set MAC addr\n");
+ return 0;
}
--
2.20.1
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2019-08-28 14:32:34.206735148 +0100
+++ 0041-net-bnxt-fix-setting-primary-MAC-address.patch 2019-08-28 14:32:31.692956223 +0100
@@ -1 +1 @@
-From 68f589f2c728e7d893b2eacd86aca09b5546d690 Mon Sep 17 00:00:00 2001
+From e8ab24b4e0a8c137a5376bb75ca823fdcce92ab5 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 68f589f2c728e7d893b2eacd86aca09b5546d690 ]
+
@@ -16 +17,0 @@
-Cc: stable@dpdk.org
@@ -26 +27 @@
-index 55b030a2b..70d24494a 100644
+index 20bca23c7..286f7cb8b 100644
@@ -29 +30 @@
-@@ -1700,5 +1700,6 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
+@@ -1542,5 +1542,6 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
@@ -33 +34 @@
-+ if (rte_is_zero_ether_addr(addr))
++ if (is_zero_ether_addr(addr))
@@ -37 +38 @@
-@@ -1706,7 +1707,5 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
+@@ -1548,7 +1549,5 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
@@ -44,3 +45,3 @@
- memcpy(filter->l2_addr, bp->mac_addr, RTE_ETHER_ADDR_LEN);
- memset(filter->l2_addr_mask, 0xff, RTE_ETHER_ADDR_LEN);
-@@ -1715,9 +1714,12 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
+ memcpy(filter->l2_addr, bp->mac_addr, ETHER_ADDR_LEN);
+ memset(filter->l2_addr_mask, 0xff, ETHER_ADDR_LEN);
+@@ -1557,9 +1556,12 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev, struct ether_addr *addr)
@@ -55 +56 @@
-+ memcpy(bp->mac_addr, addr, RTE_ETHER_ADDR_LEN);
++ memcpy(bp->mac_addr, addr, ETHER_ADDR_LEN);
next prev parent reply other threads:[~2019-08-28 13:43 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 13:41 [dpdk-stable] patch 'crypto/openssl: fix free of asymmetric crypto keys' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'kni: fix segmented mbuf data overflow' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'crypto/dpaa2_sec: fix handling of session init failure' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'mk: fix custom kernel directory name' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'examples/ip_frag: fix stale content of ethdev info' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/bnx2x: fix reading VF id' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/bnx2x: fix link events polling for SRIOV' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/bnx2x: fix fastpath SB allocation " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/tap: remove redundant declarations' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/af_packet: remove redundant declaration' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/vhost: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/null: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/pcap: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/ring: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/virtio_user: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'raw/skeleton: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'raw/dpaa2_cmdif: " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net: adjust L2 length on soft VLAN insertion' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/pcap: fix possible mbuf double freeing' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/iavf: fix driver crash when enable TSO' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'app/testpmd: fix show port info routine' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/ena: fix admin CQ polling for 32-bit' " Kevin Traynor
2019-08-28 13:41 ` [dpdk-stable] patch 'net/bnxt: fix crash on probe failure' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix Tx hang after port stop/start' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix L4 checksum error indication in Rx' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: save the number of EM flow count' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix enabling/disabling interrupts' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: check invalid VNIC in cleanup path' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix compiler warning' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix RxQ count if ntuple filtering is disabled' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: check invalid VNIC id for firmware' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/avf: fix Rx bytes stats' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/i40e: fix MAC removal check' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/i40e: fix SFP X722 with FW4.16' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'doc: fix ethernet addresses in flow API guide' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix error handling in port start' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix check of address mapping' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix adding MAC address' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix unconditional wait in link update' " Kevin Traynor
2019-08-28 13:42 ` Kevin Traynor [this message]
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix device init error path' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: reset filters before registering interrupts' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: retry IRQ callback deregistration' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix return values to standard error codes' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix lock release on getting NVM info' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix getting statistics' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix checking result of HWRM command' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix Rx interrupt vector' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: fix interrupt rearm logic' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/bnxt: remove unnecessary interrupt disable' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/e1000: fix buffer overrun while i219 processing DMA' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/mlx5: fix typos in comments' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/dpaa: check multi-segment external buffers' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/dpaa2: fix multi-segment Tx' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/ark: fix queue packet replacement' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/i40e: fix ethernet flow rule' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/i40e: fix flow director rule destroy' " Kevin Traynor
2019-08-28 13:42 ` [dpdk-stable] patch 'net/mlx5: remove redundant item from union' " Kevin Traynor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828134234.20547-40-ktraynor@redhat.com \
--to=ktraynor@redhat.com \
--cc=ajit.khaparde@broadcom.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=somnath.kotur@broadcom.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).