patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Kevin Traynor <ktraynor@redhat.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'igb_uio: fix build on Linux 5.3 for fall through' has been queued to LTS release 18.11.3
Date: Thu,  5 Sep 2019 11:17:16 +0100	[thread overview]
Message-ID: <20190905101754.21933-16-ktraynor@redhat.com> (raw)
In-Reply-To: <20190905101754.21933-1-ktraynor@redhat.com>

Hi,

FYI, your patch has been queued to LTS release 18.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 09/12/19. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/b081b185c07da807661d62c1b20653012b8d7e3c

Thanks.

Kevin Traynor

---
From b081b185c07da807661d62c1b20653012b8d7e3c Mon Sep 17 00:00:00 2001
From: Ferruh Yigit <ferruh.yigit@intel.com>
Date: Mon, 29 Jul 2019 13:32:16 +0100
Subject: [PATCH] igb_uio: fix build on Linux 5.3 for fall through
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

[ upstream commit c96bbbd010f7abb88c2ca2ed9dfc5ecd37e9027d ]

build error:
kernel/linux/igb_uio/igb_uio.c:
   In function ‘igbuio_pci_enable_interrupts’:
   kernel/linux/igb_uio/igb_uio.c:230:6:
   error: this statement may fall through
   [-Werror=implicit-fallthrough=]
  230 |   if (pci_alloc_irq_vectors(udev->pdev, 1, 1, ....
kernel/linux/igb_uio/igb_uio.c:240:2: note: here
  240 |  case RTE_INTR_MODE_MSI:
      |  ^~~~

The build error is caused by Linux kernel commit in 5.3 that enables the
"-Wimplicit-fallthrough=3" gcc flag.
Commit a035d552a93b ("Makefile: Globally enable fall-through warning")

To fix the error, either a gcc attribute can be provided [1] or a code
comment with some defined syntax need to be provided [2], since there is
already comments, updated them slightly to match the required syntax to
fix the build error.

[1]
"__attribute__ ((fallthrough));"

[2]
[ \t.!]*([Ee]lse,? |[Ii]ntentional(ly)? )?
fall(s | |-)?thr(ough|u)[ \t.!]*(-[^\n\r]*)?

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
 kernel/linux/igb_uio/igb_uio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/linux/igb_uio/igb_uio.c b/kernel/linux/igb_uio/igb_uio.c
index 3cf394bdf..039f5a5f6 100644
--- a/kernel/linux/igb_uio/igb_uio.c
+++ b/kernel/linux/igb_uio/igb_uio.c
@@ -237,5 +237,5 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
 #endif
 
-	/* fall back to MSI */
+	/* falls through - to MSI */
 	case RTE_INTR_MODE_MSI:
 #ifndef HAVE_ALLOC_IRQ_VECTORS
@@ -256,5 +256,5 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
 		}
 #endif
-	/* fall back to INTX */
+	/* falls through - to INTX */
 	case RTE_INTR_MODE_LEGACY:
 		if (pci_intx_mask_supported(udev->pdev)) {
@@ -266,5 +266,5 @@ igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
 		}
 		dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n");
-	/* fall back to no IRQ */
+	/* falls through - to no IRQ */
 	case RTE_INTR_MODE_NONE:
 		udev->mode = RTE_INTR_MODE_NONE;
-- 
2.20.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2019-09-05 10:36:48.489815891 +0100
+++ 0016-igb_uio-fix-build-on-Linux-5.3-for-fall-through.patch	2019-09-05 10:36:47.493700929 +0100
@@ -1 +1 @@
-From c96bbbd010f7abb88c2ca2ed9dfc5ecd37e9027d Mon Sep 17 00:00:00 2001
+From b081b185c07da807661d62c1b20653012b8d7e3c Mon Sep 17 00:00:00 2001
@@ -8,0 +9,2 @@
+[ upstream commit c96bbbd010f7abb88c2ca2ed9dfc5ecd37e9027d ]
+
@@ -35,2 +36,0 @@
-
-Cc: stable@dpdk.org

  parent reply	other threads:[~2019-09-05 10:18 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-05 10:17 [dpdk-stable] patch 'ethdev: avoid getting uninitialized info for bad port' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'vfio: use contiguous mapping for IOVA as VA mode' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'compress/zlib: fix error handling' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'cryptodev: fix typo in comment' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'security: remove duplicated symbols from map file' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/i40e: fix RSS hash update for X722 VF' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/sfc: fix power of 2 round up when align has smaller type' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/sfc: fix align to power of 2 " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/sfc: unify power of 2 alignment check macro' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/bnxt: fix extended port counter statistics' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/bnxt: reduce verbosity of a message' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/pcap: fix Rx with small buffers' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/pcap: fix Tx return count in error conditions' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/avf: fix endless loop' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/ixgbe: fix RETA size for VF' " Kevin Traynor
2019-09-05 10:17 ` Kevin Traynor [this message]
2019-09-05 10:17 ` [dpdk-stable] patch 'distributor: fix livelock on flush' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'app/testpmd: fix eth packet dump for small buffers' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'app/testpmd: rename ambiguous VF config variable' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'examples/ip_frag: remove Tx fast free offload flag' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'examples/ptpclient: fix delay request message' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'test: enable installing app with meson' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'test/eal: fix --socket-mem option' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/virtio: fix build' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'examples/l3fwd: fix unaligned memory access on x86' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'eal: fix control thread affinity with --lcores' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'doc: update features supported by mlx' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'usertools: replace unsafe input function' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'devtools: fix building kernel component tags' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'test/flow_classify: fix undefined behavior' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'acl: fix undefined behavior of bit shifts' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'test: remove link to ixgbe/i40e with meson' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'eal: hide internal function' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'bus/pci: remove unused x86 Linux constant' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/dpaa: fix build with 0 headroom' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'bus/fslmc: " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/virtio: " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/ena: fix L4 checksum Tx offload' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'doc: add co-existence consideration for bnx2x' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'doc: add co-existence consideration for qede' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/thunderx: fix crash on detach' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'examples/bpf: fix build' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/ixgbe: fix address of first segment' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/i40e: " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/avf: " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/fm10k: " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/mlx4: fix crash on info query in secondary process' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/mlx5: fix validation of VLAN PCP item' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/mlx5: fix VLAN inner type matching on DR/DV' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/mlx5: fix link speed info when link is down' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'app/testpmd: fix latency stats deinit on signal' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'net/ixgbe/base: fix product version check' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'eal: increase maximum different hugepage sizes on Arm' " Kevin Traynor
2019-09-05 10:17 ` [dpdk-stable] patch 'usertools: fix input handling in telemetry script' " Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190905101754.21933-16-ktraynor@redhat.com \
    --to=ktraynor@redhat.com \
    --cc=ferruh.yigit@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).