Re: [dpdk-stable] [dpdk-dev] [PATCH] doc: minor fixes in tap guide

[Stephen Hemminger <stephen@networkplumber.org>]

On Thu, 21 Nov 2019 14:27:01 +0100
Andrzej Ostruszka <aostruszka@marvell.com> wrote:

> Corrected one typo and ip address.
> 
> Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
> 
> Fixes: de96fe68ae95 ("net/tap: add basic flow API patterns and actions")
> Cc: stable@dpdk.org
> ---
>  doc/guides/nics/tap.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/doc/guides/nics/tap.rst b/doc/guides/nics/tap.rst
> index 4b6d77d37..b6a626a40 100644
> --- a/doc/guides/nics/tap.rst
> +++ b/doc/guides/nics/tap.rst
> @@ -76,7 +76,7 @@ Please change the IP addresses as you see fit.
>  
>  If routing is enabled on the host you can also communicate with the DPDK App
>  over the internet via a standard socket layer application as long as you
> -account for the protocol handing in the application.
> +account for the protocol handling in the application.
>  
>  If you have a Network Stack in your DPDK application or something like it you
>  can utilize that stack to handle the network protocols. Plus you would be able
> @@ -134,7 +134,7 @@ Examples of testpmd flow rules
>  
>  Drop packets for destination IP 192.168.0.1::
>  
> -   testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 dst is 1.1.1.1 \  
> +   testpmd> flow create 0 priority 1 ingress pattern eth / ipv4 dst is 192.168.0.1 \
>              / end actions drop / end

There is a standard RFC for what address to use in documentation.

RFC5735
   192.0.2.0/24 - This block is assigned as "TEST-NET-1" for use in
   documentation and example code.  It is often used in conjunction with
   domain names example.com or example.net in vendor and protocol
   documentation.  As described in [RFC5737], addresses within this
   block do not legitimately appear on the public Internet and can be
   used without any coordination with IANA or an Internet registry.  See
   [RFC1166].


This is done so that users don't blindly cut/paste from documentation....