patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Kevin Traynor <ktraynor@redhat.com>
To: dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] please help backporting some patches to LTS release 18.11.6
Date: Tue,  3 Dec 2019 19:43:27 +0000	[thread overview]
Message-ID: <20191203194327.23717-1-ktraynor@redhat.com> (raw)

Hi commit authors (and maintainers),

I didn't apply following commits from DPDK master to 18.11
LTS branch, as conflicts or build errors occur.

Can authors check your patches in the following list and either:
    - Backport your patches to the 18.11 branch, or
    - Indicate that the patch should not be backported

Some notes on LTS backports:

A backport should contain a reference to the DPDK master branch commit
in it's commit message in the following fashion:
    [ upstream commit <commit's dpdk master branch SHA-1 checksum> ]

For example:
    https://git.dpdk.org/dpdk-stable/commit/?h=18.11&id=d90e6ae6f936ecdc2fd3811ff9f26aec7f3c06eb

When sending the backported patch, please indicate the target branch in the
subject line, as we have multiple branches, for example:
    [PATCH 18.11] foo/bar: fix baz

With git format-patch, this can be achieved by appending the parameter:
    --subject-prefix='PATCH 18.11'

Send the backported patch to "stable@dpdk.org" but not "dev@dpdk.org".

FYI, branch 18.11 is located at tree:
   https://git.dpdk.org/dpdk-stable

Thanks.

Kevin.

---
c023cd5b2  Ajit Khaparde    net/bnxt: fix async link handling and update
fe7848521  Ajit Khaparde    net/bnxt: fix doorbell register offset for Tx ring
89278c59d  Ajit Khaparde    net/bnxt: fix flow flush handling
458f0360e  Ajit Khaparde    net/bnxt: get default HWRM command timeout from FW
305d1fd39  Ajit Khaparde    net/bnxt: update trusted VF status only when it changes
b149a7064  Anatoly Burakov  eal/freebsd: add config reattach in secondary process
75dbb45f2  Arnon Warshavsky eal: fix mapping leak in secondary process
ea81c1b81  Dekel Peled      net/mlx5: fix NVGRE matching
9d10f53e4  Harman Kalra     test/metrics: fix second run
0964a9512  Hemant Agrawal   bus/dpaa: fix dpaa_sec blacklist
2967612f4  Hemant Agrawal   test/crypto: fix session init failure for wireless case
b0437f8b0  Honnappa Nagarahalli hash: load value after full key compare
6f43682e0  Honnappa Nagarahalli test/hash: init parameters in the correct function
e0d865357  Kalesh AP        net/bnxt: enable interrupts according interface status
1f3cea004  Kalesh AP        net/bnxt: fix check of address mapping
996355970  Kalesh AP        net/bnxt: fix coding style
2171e66f9  Kalesh AP        net/bnxt: fix deferred start of Tx queues
324c56551  Kalesh AP        net/bnxt: fix error checking of FW commands
9bc556e3e  Kalesh AP        net/bnxt: fix error handling in xstats
96b0931d5  Kalesh AP        net/bnxt: fix extended port counter statistics
dc177579d  Kalesh AP        net/bnxt: fix L2 context calculation for Thor
3955e2687  Kalesh AP        net/bnxt: fix Rx queue start/stop
988562f0b  Kalesh AP        net/bnxt: fix setting default MAC address
9f55e6ac7  Kalesh AP        net/bnxt: fix stats errors handling
aa2c00702  Kalesh AP        net/bnxt: fix traffic stall on Rx queue stop/start
72aaa312e  Kalesh AP        net/bnxt: fix VF probe when MAC address is zero
9924dfd60  Kalesh AP        net/bnxt: move macro definitions to header file
a135e050a  Konstantin Ananyev examples/ipsec-secgw: fix packet length
94d4afd2d  Lance Richardson net/bnxt: advertise scatter Rx offload capability
e76097f84  Marvin Liu       net/virtio: cleanup on demand when in-order Tx
1ae55ad38  Marvin Liu       net/virtio: fix mbuf data and packet length mismatch
721c95301  Matan Azrad      net/mlx5: fix Rx scatter mode validation
6d608a6cc  Nicolas Chautru  baseband/fpga_lte_fec: fix probing
005d943e5  Nipun Gupta      net/dpaa2: set port in mbuf
e9924638f  Pavel Belous     net/atlantic: add FW mailbox guard mutex
34c0ba839  Rahul Gupta      net/bnxt: fix Rx queue count
e9ccabda0  Rahul Gupta      net/bnxt: reduce cleanup time during reset recovery
09aac391a  Santoshkumar Karanappa Rastapur net/bnxt: fix forwarding with higher mbuf size
b4e190d55  Santoshkumar Karanappa Rastapur net/bnxt: fix MAC/VLAN filter allocation
d6c7475b9  Santoshkumar Karanappa Rastapur net/bnxt: free default completion ring before VF config
5526c8025  Somnath Kotur    net/bnxt: fix race between interrupt handler and dev config
f35eaaca5  Stephen Hemminger net/bnxt: fix crash in secondary process
dbda2092d  Tao Zhu          net/i40e: fix request queue in VF
6118503d8  Venkat Duvvuru   net/bnxt: fix VLAN filtering
dcfbc594f  Wei Zhao         net/iavf: fix queue interrupt for ice


             reply	other threads:[~2019-12-03 19:43 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-03 19:43 Kevin Traynor [this message]
2019-12-03 19:58 ` Kevin Traynor
2019-12-03 20:18   ` Ajit Khaparde
     [not found] <20191203190657.22859-1-ktraynor@redhat.com>
2019-12-04  1:57 ` Zhu, TaoX
2019-12-04 10:49   ` Kevin Traynor
2019-12-11  7:36 ` Arnon Warshavsky
2019-12-11  9:05   ` Kevin Traynor
2019-12-12 11:58 Kevin Traynor
2019-12-17 10:06 ` Somnath Kotur
2019-12-17 11:06   ` Kevin Traynor
2019-12-17 14:04     ` Kevin Traynor
2019-12-17 14:10       ` Somnath Kotur
2019-12-18  6:26         ` Somnath Kotur
2019-12-18 11:10           ` Kevin Traynor
2019-12-19  3:31             ` Somnath Kotur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191203194327.23717-1-ktraynor@redhat.com \
    --to=ktraynor@redhat.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).