[dpdk-stable] patch 'eal: add ack interrupt API' has been queued to LTS release 18.11.6

[Kevin Traynor <ktraynor@redhat.com>]

Hi,

FYI, your patch has been queued to LTS release 18.11.6

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 12/17/19. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/3e41c8bc75845ff157a00581797431bf5fb35770

Thanks.

Kevin.

---
From 3e41c8bc75845ff157a00581797431bf5fb35770 Mon Sep 17 00:00:00 2001
From: Nithin Dabilpuram <ndabilpuram@marvell.com>
Date: Tue, 23 Jul 2019 10:04:18 +0200
Subject: [PATCH] eal: add ack interrupt API

[upstream commit a159730c2f3ae3fdabc52c20565470a9d8abd98a]

Add new ack interrupt API to avoid using
VFIO_IRQ_SET_ACTION_TRIGGER(rte_intr_enable()) for
acking interrupt purpose for VFIO based interrupt handlers.
This implementation is specific to Linux.

Using rte_intr_enable() for acking interrupt has below issues

 * Time consuming to do for every interrupt received as it will
   free_irq() followed by request_irq() and all other initializations
 * A race condition because of a window between free_irq() and
   request_irq() with packet reception still on and device still
   enabled and would throw warning messages like below.
   [158764.159833] do_IRQ: 9.34 No irq handler for vector

In this patch, rte_intr_ack() is a no-op for VFIO_MSIX/VFIO_MSI interrupts
as they are edge triggered and kernel would not mask the interrupt before
delivering the event to userspace and we don't need to ack.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
(cherry picked from commit a159730c2f3ae3fdabc52c20565470a9d8abd98a)
---
 lib/librte_eal/bsdapp/eal/eal_interrupts.c    |  9 ++
 .../common/include/rte_interrupts.h           | 21 +++++
 lib/librte_eal/linuxapp/eal/eal_interrupts.c  | 82 +++++++++++++++++++
 lib/librte_eal/rte_eal_version.map            |  1 +
 4 files changed, 113 insertions(+)

diff --git a/lib/librte_eal/bsdapp/eal/eal_interrupts.c b/lib/librte_eal/bsdapp/eal/eal_interrupts.c
index 2feee2d52..9aa9178d5 100644
--- a/lib/librte_eal/bsdapp/eal/eal_interrupts.c
+++ b/lib/librte_eal/bsdapp/eal/eal_interrupts.c
@@ -328,4 +328,13 @@ rte_intr_disable(const struct rte_intr_handle *intr_handle)
 }
 
+int
+rte_intr_ack(const struct rte_intr_handle *intr_handle)
+{
+	if (intr_handle && intr_handle->type == RTE_INTR_HANDLE_VDEV)
+		return 0;
+
+	return -1;
+}
+
 static void
 eal_intr_process_interrupts(struct kevent *events, int nfds)
diff --git a/lib/librte_eal/common/include/rte_interrupts.h b/lib/librte_eal/common/include/rte_interrupts.h
index bcd935805..9d9bda171 100644
--- a/lib/librte_eal/common/include/rte_interrupts.h
+++ b/lib/librte_eal/common/include/rte_interrupts.h
@@ -7,4 +7,5 @@
 
 #include <rte_common.h>
+#include <rte_compat.h>
 
 /**
@@ -86,4 +87,24 @@ int rte_intr_enable(const struct rte_intr_handle *intr_handle);
 int rte_intr_disable(const struct rte_intr_handle *intr_handle);
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * It acknowledges an interrupt raised for the specified handle.
+ *
+ * This function should be called at the end of each interrupt handler either
+ * from application or driver, so that currently raised interrupt is acked and
+ * further new interrupts are raised.
+ *
+ * @param intr_handle
+ *  pointer to the interrupt handle.
+ *
+ * @return
+ *  - On success, zero.
+ *  - On failure, a negative value.
+ */
+__rte_experimental
+int rte_intr_ack(const struct rte_intr_handle *intr_handle);
+
 #ifdef __cplusplus
 }
diff --git a/lib/librte_eal/linuxapp/eal/eal_interrupts.c b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
index cbac451e1..102a9549e 100644
--- a/lib/librte_eal/linuxapp/eal/eal_interrupts.c
+++ b/lib/librte_eal/linuxapp/eal/eal_interrupts.c
@@ -196,4 +196,26 @@ vfio_disable_intx(const struct rte_intr_handle *intr_handle) {
 }
 
+/* unmask/ack legacy (INTx) interrupts */
+static int
+vfio_ack_intx(const struct rte_intr_handle *intr_handle)
+{
+	struct vfio_irq_set irq_set;
+
+	/* unmask INTx */
+	memset(&irq_set, 0, sizeof(irq_set));
+	irq_set.argsz = sizeof(irq_set);
+	irq_set.count = 1;
+	irq_set.flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK;
+	irq_set.index = VFIO_PCI_INTX_IRQ_INDEX;
+	irq_set.start = 0;
+
+	if (ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, &irq_set)) {
+		RTE_LOG(ERR, EAL, "Error unmasking INTx interrupts for fd %d\n",
+			intr_handle->fd);
+		return -1;
+	}
+	return 0;
+}
+
 /* enable MSI interrupts */
 static int
@@ -639,4 +661,64 @@ rte_intr_enable(const struct rte_intr_handle *intr_handle)
 }
 
+/**
+ * PMD generally calls this function at the end of its IRQ callback.
+ * Internally, it unmasks the interrupt if possible.
+ *
+ * For INTx, unmasking is required as the interrupt is auto-masked prior to
+ * invoking callback.
+ *
+ * For MSI/MSI-X, unmasking is typically not needed as the interrupt is not
+ * auto-masked. In fact, for interrupt handle types VFIO_MSIX and VFIO_MSI,
+ * this function is no-op.
+ */
+int
+rte_intr_ack(const struct rte_intr_handle *intr_handle)
+{
+	if (intr_handle && intr_handle->type == RTE_INTR_HANDLE_VDEV)
+		return 0;
+
+	if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
+		return -1;
+
+	switch (intr_handle->type) {
+	/* Both acking and enabling are same for UIO */
+	case RTE_INTR_HANDLE_UIO:
+		if (uio_intr_enable(intr_handle))
+			return -1;
+		break;
+	case RTE_INTR_HANDLE_UIO_INTX:
+		if (uio_intx_intr_enable(intr_handle))
+			return -1;
+		break;
+	/* not used at this moment */
+	case RTE_INTR_HANDLE_ALARM:
+		return -1;
+#ifdef VFIO_PRESENT
+	/* VFIO MSI* is implicitly acked unlike INTx, nothing to do */
+	case RTE_INTR_HANDLE_VFIO_MSIX:
+	case RTE_INTR_HANDLE_VFIO_MSI:
+		return 0;
+	case RTE_INTR_HANDLE_VFIO_LEGACY:
+		if (vfio_ack_intx(intr_handle))
+			return -1;
+		break;
+#ifdef HAVE_VFIO_DEV_REQ_INTERFACE
+	case RTE_INTR_HANDLE_VFIO_REQ:
+		return -1;
+#endif
+#endif
+	/* not used at this moment */
+	case RTE_INTR_HANDLE_DEV_EVENT:
+		return -1;
+	/* unknown handle type */
+	default:
+		RTE_LOG(ERR, EAL, "Unknown handle type of fd %d\n",
+			intr_handle->fd);
+		return -1;
+	}
+
+	return 0;
+}
+
 int
 rte_intr_disable(const struct rte_intr_handle *intr_handle)
diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/rte_eal_version.map
index 3fe78260d..f39c18f4d 100644
--- a/lib/librte_eal/rte_eal_version.map
+++ b/lib/librte_eal/rte_eal_version.map
@@ -319,4 +319,5 @@ EXPERIMENTAL {
 	rte_fbarray_set_free;
 	rte_fbarray_set_used;
+	rte_intr_ack;
 	rte_log_register_type_and_pick_level;
 	rte_malloc_dump_heaps;
-- 
2.21.0