From: Nipun Gupta <nipun.gupta@nxp.com>
To: ktraynor@redhat.com
Cc: stable@dpdk.org, Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-stable] [PATCH 18.11] test/crypto: fix session init failure for wireless case
Date: Wed, 18 Dec 2019 10:15:27 +0530 [thread overview]
Message-ID: <20191218044527.12485-1-nipun.gupta@nxp.com> (raw)
From: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add the support to handle the failure in session
create for wireless related cases. Else it will cause
segment fault due to I/O on un-initialized sessions.
Fixes: b3bbd9e5f2659 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
---
test/test/test_cryptodev.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index fbe8c21e6..5ddd25781 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -2300,6 +2300,7 @@ create_wireless_algo_hash_session(uint8_t dev_id,
enum rte_crypto_auth_algorithm algo)
{
uint8_t hash_key[key_len];
+ int status;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2322,8 +2323,9 @@ create_wireless_algo_hash_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
&ut_params->auth_xform, ts_params->session_mpool);
+ TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
return 0;
}
@@ -2336,7 +2338,7 @@ create_wireless_algo_cipher_session(uint8_t dev_id,
uint8_t iv_len)
{
uint8_t cipher_key[key_len];
-
+ int status;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2359,8 +2361,9 @@ create_wireless_algo_cipher_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
&ut_params->cipher_xform, ts_params->session_mpool);
+ TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
return 0;
}
@@ -2438,6 +2441,7 @@ create_wireless_algo_cipher_auth_session(uint8_t dev_id,
{
uint8_t cipher_auth_key[key_len];
+ int status;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2475,9 +2479,10 @@ create_wireless_algo_cipher_auth_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
&ut_params->cipher_xform, ts_params->session_mpool);
+ TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
return 0;
}
@@ -2492,6 +2497,7 @@ create_wireless_cipher_auth_session(uint8_t dev_id,
{
const uint8_t key_len = tdata->key.len;
uint8_t cipher_auth_key[key_len];
+ int status;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2534,9 +2540,10 @@ create_wireless_cipher_auth_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
&ut_params->cipher_xform, ts_params->session_mpool);
+ TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
return 0;
}
@@ -2562,7 +2569,7 @@ create_wireless_algo_auth_cipher_session(uint8_t dev_id,
uint8_t cipher_iv_len)
{
uint8_t auth_cipher_key[key_len];
-
+ int status;
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2596,9 +2603,10 @@ create_wireless_algo_auth_cipher_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
&ut_params->auth_xform, ts_params->session_mpool);
+ TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
return 0;
--
2.17.1
next reply other threads:[~2019-12-18 5:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 4:45 Nipun Gupta [this message]
2019-12-18 11:22 ` Kevin Traynor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218044527.12485-1-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=hemant.agrawal@nxp.com \
--cc=ktraynor@redhat.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).