patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Sun GuinanX <guinanx.sun@intel.com>
To: dev@dpdk.org
Cc: Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Qiming Yang <qiming.yang@intel.com>,
	Qi Zhang <qi.z.zhang@intel.com>,
	Sun GuinanX <guinanx.sun@intel.com>,
	stable@dpdk.org
Subject: [dpdk-stable] [PATCH] net/ixgbe: fix flow ctrl mode setting
Date: Thu, 19 Dec 2019 04:43:56 +0000
Message-ID: <20191219044356.30762-1-guinanx.sun@intel.com> (raw)

When the port starts, the hw register is reset first,
and then the required parameters are set again.
If the parameters to be used are not set after resetting the register,
a read register error will occur. This patch is used to fix the problem.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Sun GuinanX <guinanx.sun@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 20 ++++++++++++++++++++
 drivers/net/ixgbe/ixgbe_ethdev.h |  1 +
 2 files changed, 21 insertions(+)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 2c6fd0f13..e602df02b 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -2539,6 +2539,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 {
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_adapter *adapter = dev->data->dev_private;
 	struct ixgbe_vf_info *vfinfo =
 		*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private);
 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
@@ -2555,6 +2556,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 		IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
 	struct ixgbe_macsec_setting *macsec_setting =
 		IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
+	uint32_t mflcn;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -2665,6 +2667,20 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 	}
 
 	ixgbe_restore_statistics_mapping(dev);
+	err = ixgbe_fc_enable(hw);
+	if ((err == IXGBE_SUCCESS) || (err == IXGBE_ERR_FC_NOT_NEGOTIATED)) {
+
+		mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+
+		/* set or clear MFLCN.PMCF bit depending on configuration */
+		if (adapter->mac_ctrl_frame_fwd != 0)
+			mflcn |= IXGBE_MFLCN_PMCF;
+		else
+			mflcn &= ~IXGBE_MFLCN_PMCF;
+
+		IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn);
+		IXGBE_WRITE_FLUSH(hw);
+	}
 
 	err = ixgbe_dev_rxtx_start(dev);
 	if (err < 0) {
@@ -2893,6 +2909,8 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
 
 	adapter->rss_reta_updated = 0;
 
+	adapter->mac_ctrl_frame_fwd = 0;
+
 	hw->adapter_stopped = true;
 }
 
@@ -4646,6 +4664,7 @@ static int
 ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
 	struct ixgbe_hw *hw;
+	struct ixgbe_adapter *adapter = dev->data->dev_private;
 	int err;
 	uint32_t rx_buf_size;
 	uint32_t max_high_water;
@@ -4682,6 +4701,7 @@ ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	hw->fc.low_water[0]   = fc_conf->low_water;
 	hw->fc.send_xon       = fc_conf->send_xon;
 	hw->fc.disable_fc_autoneg = !fc_conf->autoneg;
+	adapter->mac_ctrl_frame_fwd = fc_conf->mac_ctrl_frame_fwd;
 
 	err = ixgbe_fc_enable(hw);
 
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index 76a1b9d18..5af584f9e 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -510,6 +510,7 @@ struct ixgbe_adapter {
 	 * mailbox status) link status.
 	 */
 	uint8_t pflink_fullchk;
+	uint8_t mac_ctrl_frame_fwd;
 };
 
 struct ixgbe_vf_representor {
-- 
2.17.1


             reply	other threads:[~2019-12-19  5:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-19  4:43 Sun GuinanX [this message]
2019-12-19 10:17 ` [dpdk-stable] [PATCH v2] " Guinan Sun
2020-02-01 13:12   ` [dpdk-stable] [dpdk-dev] " Ye Xiaolong
2020-02-17  7:51 ` [dpdk-stable] [PATCH v3] " Guinan Sun
2020-02-18  3:39 ` [dpdk-stable] [PATCH v4] " Guinan Sun
2020-02-18  9:21   ` [dpdk-stable] [dpdk-dev] " Konieczny, TomaszX
2020-02-19  7:06   ` Ye Xiaolong
2020-02-19 12:44     ` Konieczny, TomaszX
2020-02-19 15:27       ` Ye Xiaolong
2020-05-09  7:34   ` Zhao1, Wei
2020-05-09  8:54     ` Sun, GuinanX
2020-05-09  9:30       ` Zhao1, Wei
2020-05-09  9:48         ` Sun, GuinanX
2020-05-09  9:49       ` Zhao1, Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191219044356.30762-1-guinanx.sun@intel.com \
    --to=guinanx.sun@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=qiming.yang@intel.com \
    --cc=stable@dpdk.org \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git